×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Yu Sun ×
Shuffle
01.
arXiv (CS.AI) 2026-06-17

DeepInsight: A Unified Evaluation Infrastructure Across the Physical AI Stack

arXiv:2606.17574v1 Announce Type: new Abstract: Evaluating a Physical AI stack spans operators that differ by more than three orders of magnitude – from a single foundation-model decoding step to thousands of physics ticks of whole-body control – varying orthogonally in modality, reward semantics, and resource profile. No existing framework spans this range, so the stack is evaluated today by stitching together separate harnesses that share neither runtime nor scoring, preserving each segment's local validity but losing the shared identity needed to diagnose cross-layer regressions. We present DeepInsight, an evaluation infrastructure that serves this full spectrum on a single runtime. Rather than homogenize the regimes, it preserves their heterogeneity behind three narrow abstractions – task, resource, and result – each realized as one invariant shared by every subsystem: one episode driver, one resource-handle protocol implemented by every expensive backend (LLM inference and sandboxed runtimes alike), and one trace identity scheme under which every event is written. Deployed in production across all three layers of an embodied humanoid stack, this single set of invariants onboards new benchmarks largely by configuration. Where mature peer orchestrators exist – at the foundation-model end – it reproduces published references and peer-framework readings within their own spread, runs the same suites faster on a single node, and scales near-linearly across nodes. Its distinctive return is diagnostic: because every layer writes into one shared trace, a regression that begins in one layer and surfaces in another stays localizable on that trace – a cross-layer payoff no federation of per-segment harnesses can reproduce.

02.
arXiv (CS.AI) 2026-06-25

Agentic Software Engineering: Foundational Pillars and a Research Roadmap

arXiv:2509.06216v3 Announce Type: replace-cross Abstract: Agentic Software Engineering (SE 3.0) represents a new era where intelligent agents are tasked not with simple code generation, but with achieving complex, goal-oriented SE objectives. To harness these new capabilities while ensuring trustworthiness, we must recognize a fundamental duality within the SE field in the Agentic SE era, comprising two symbiotic modalities: SE for Humans and SE for Agents. This duality demands a radical reimagining of the foundational pillars of SE (actors, processes, tools, and artifacts) which manifest differently across each modality. We propose two purpose-built workbenches to support this vision. The Agent Command Environment (ACE) serves as a command center where humans orchestrate and mentor agent teams, handling outputs such as Merge-Readiness Packs (MRPs) and Consultation Request Packs (CRPs). The Agent Execution Environment (AEE) is a digital workspace where agents perform tasks while invoking human expertise when facing ambiguity or complex trade-offs. This bi-directional partnership, which supports agent-initiated human callbacks and handovers, gives rise to new, structured engineering activities (i.e., processes) that redefine human-AI collaboration, elevating the practice from agentic coding to true agentic software engineering. This paper presents the Structured Agentic Software Engineering (SASE) vision, outlining several of the foundational pillars for the future of SE. The paper culminates in a research roadmap that identifies a few key challenges and opportunities while briefly discussing the resulting impact of this future on SE education. Our goal is not to offer a definitive solution, but to provide a conceptual scaffold with structured vocabulary to catalyze a community-wide dialogue, pushing the SE community to think beyond its classic, human-centric tenets toward a disciplined, scalable, and trustworthy agentic future.

03.
arXiv (CS.CV) 2026-06-16

EyeMVP: OCT-Informed Fundus Representation Learning via Paired CFP–OCT Pretraining

Color fundus photography (CFP) is the mainstay for large-scale retinal screening, yet its diagnostic capacity is constrained by the lack of depth-resolved structural information. Optical coherence tomography (OCT) provides cross-sectional retinal anatomy, but is less accessible in population-level screening. Here, we present EyeMVP, a cross-modal retinal foundation model that uses paired CFP–OCT pretraining to learn OCT-informed CFP representations. EyeMVP is pretrained on 674,893 strict same-eye same-day paired CFP–OCT image triples from 112,642 patients across eight hospitals in China. The model uses cross-modal masked reconstruction to enrich CFP representations with OCT-associated supervision, while requiring only CFP images at inference. To accommodate the non-aligned imaging geometry between en-face CFP and cross-sectional OCT, EyeMVP combines source-constrained cross-attention with CFP-derived structural masks. Across 16 downstream tasks, including classification, segmentation, few-shot adaptation, and cross-modal retrieval, EyeMVP outperforms representative retinal foundation models and shows consistent gains on tasks involving macular and optic nerve structure. For CFP-challenging macular diseases, EyeMVP achieves an AUROC of 0.948 for macular edema (vs.~0.852 for EyeCLIP) and 0.825 for myopic macular schisis. In an exploratory reader study, EyeMVP exceeds junior and intermediate ophthalmologist groups but does not reach senior ophthalmologist performance on macular edema, while showing numerically higher balanced accuracy than all reader groups on myopic macular schisis. These results suggest that pixel-level cross-modal reconstruction can enrich CFP representations with OCT-associated supervision, providing a practical route toward stronger CFP-based retinal analysis in screening settings.

04.
arXiv (CS.CV) 2026-06-16

UniT: Unified Multimodal Chain-of-Thought Test-time Scaling

Unified models can handle both multimodal understanding and generation within a single architecture, yet they typically operate in a single pass without iteratively refining their outputs. Many multimodal tasks, especially those involving complex spatial compositions, multiple interacting objects, or evolving instructions, require decomposing instructions, verifying intermediate results, and making iterative corrections. While test-time scaling (TTS) has demonstrated that allocating additional inference compute for iterative reasoning substantially improves language model performance, extending this paradigm to unified multimodal models remains an open challenge. We introduce UniT, a framework for multimodal chain-of-thought test-time scaling that enables a single unified model to reason, verify, and refine across multiple rounds. UniT combines agentic data synthesis, unified model training, and flexible test-time inference to elicit cognitive behaviors including verification, subgoal decomposition, and content memory. Our key findings are: (1) unified models trained on short reasoning trajectories generalize to longer inference chains at test time; (2) sequential chain-of-thought reasoning provides a more scalable and compute-efficient TTS strategy than parallel sampling; (3) training on generation and editing trajectories improves out-of-distribution visual reasoning. These results establish multimodal test-time scaling as an effective paradigm for advancing both generation and understanding in unified models.

05.
arXiv (CS.AI) 2026-06-11

On the Geometry of On-Policy Distillation

arXiv:2606.07082v2 Announce Type: replace-cross Abstract: On-policy distillation (OPD) is increasingly used to improve large language model reasoning, but its training dynamics remain poorly understood. We characterize the trajectory of OPD updates in parameter space and compare it with supervised fine-tuning (SFT) and reinforcement learning with verifiable rewards (RLVR). A suite of parameter-space diagnostics consistently places OPD in a relaxed off-principal regime: compared with SFT, its updates affect fewer weights and avoid principal directions more strongly, while compared with RLVR, they remain less tightly constrained. Beyond this static localization, OPD exhibits subspace locking: its cumulative updates rapidly enter a narrow low-dimensional channel. Constraining training to the update subspace formed early in training preserves OPD performance but substantially degrades SFT, indicating that the locked subspace is functionally sufficient for OPD. Control experiments further show that sparsifying the update tokens and shifting rollout generation off-policy preserve the rank dynamics, whereas mixing the OPD objective with RLVR changes them. Overall, these results suggest that OPD is not merely an intermediate point between SFT and RLVR, but induces its own update geometry in parameter space.

06.
arXiv (CS.CV) 2026-06-16

FusionRS: A Large-Scale RGB-Infrared Remote Sensing Dataset for Dual-Modal Vision-Language Foundation Models

Remote sensing vision-language models have advanced Earth observation understanding, but most existing work remains centered on RGB imagery, leaving the complementary information in infrared data underexplored. Infrared images provide distinctive cues, including thermal intensity structures, object boundaries, and illumination-invariant scene features, which can enrich visual-language learning beyond conventional RGB observations. However, a large-scale RGB-infrared-text dataset for remote sensing vision-language modeling is still absent. To address this gap, we introduce FusionRS, the first large-scale RGB-infrared-text dataset designed for dual-modal vision-language learning in remote sensing. FusionRS is constructed by translating diverse public RGB remote sensing images into infrared-style counterparts, forming aligned RGB-IR image pairs. Each pair is associated with conventional scene captions and IR-aware captions that explicitly describe infrared-specific visual properties while preserving semantic content. Based on FusionRS, we train dual-modal vision-language foundation models for RGB-IR joint understanding. We first train CLIP-style models for RGB-IR-text alignment, and then fine-tune generative VLMs for dual-modal RGB-IR captioning. Experiments show that FusionRS improves RGB-IR alignment, infrared-to-text retrieval, and dual-modal captioning over RGB-only and non-IR-aware training settings. Ablation studies further verify that IR-aware captions are crucial for strengthening infrared-language alignment, highlighting the importance of modality-specific textual supervision for more scalable RGB-infrared remote sensing vision-language representation learning.

07.
arXiv (CS.CL) 2026-06-16

LM-SPT: LM-Aligned Semantic Distillation for Speech Tokenization

With the rapid progress of speech language models (SLMs), discrete speech tokens have emerged as a core interface between speech and text, enabling unified modeling across modalities. Recent speech tokenization approaches aim to isolate semantic information from low-level acoustics to better align with language models (LMs). In particular, previous methods use self-supervised learning (SSL) teachers such as HuBERT to extract semantic representations, which are then distilled into a semantic quantizer to suppress acoustic redundancy as well as capture content-related latent structures. However, these tokenizers often operate at relatively high frame rates, producing token sequences significantly longer than their textual counterparts and hindering seamless integration with pretrained LMs. Although recent methods attempt to reduce the token rate by applying uniform average pooling to SSL features, this can over-smooth content-bearing regions and dilute the structural information, thereby potentially limiting the LM alignment. To address this, we propose LM-SPT, an LM-aligned speech tokenization method based on semantic speech-resynthesis distillation. Instead of directly matching teacher and student features via pooling, LM-SPT resynthesizes speech from semantic tokens only and minimizes the discrepancy between representations extracted from the original and resynthesized waveforms using a frozen, LM-aligned speech encoder. This indirect supervision avoids rigid temporal alignment and encourages dedicated semantic units that are more semantically aligned with LMs under reduced frame rates. Experimental results show that the proposed LM-SPT consistently outperforms previous semantic-enhanced speech tokenizers when applied to SLMs for the tasks of automatic speech recognition and text-to-speech, even without compromising the speech reconstruction fidelity at the codec level.

08.
arXiv (CS.CL) 2026-06-25

Sarashina2.2-TTS: Tackling Kanji Polyphony in Japanese Speech Generation via Data Scaling and Targeted Data Synthesis

While large language model (LLM)-based text-to-speech (TTS) systems have achieved high-quality speech synthesis, most existing systems focus on English and Chinese. Japanese, however, remains under-explored, and its unique linguistic challenges, such as widespread context-dependent kanji polyphony, have yet to be adequately tackled. Here we introduce Sarashina2.2-TTS (https://github.com/sbintuitions/sarashina2.2-tts), a Japanese-centric LLM-TTS system that tackles these challenges through a dual approach: data strategy and evaluation methodology. First, we scale training to approximately 361k hours of speech, incorporating a balanced mix of Japanese and English data. Furthermore, we design a targeted data augmentation pipeline covering all 2,136 Joyo (regular-use) kanji designated by Japan's Agency for Cultural Affairs to efficiently address kanji polyphony disambiguation. Second, we introduce the Joyo Kanji Yomi Benchmark (https://github.com/sbintuitions/JoyoKanji-Yomi-Benchmark), covering all 2,136 Joyo kanji and their 4,378 readings. Alongside this benchmark, we propose Kana-CER, a metric that compares synthesized speech against reference readings in the kana space, eliminating orthographic variations to directly measure pronunciation correctness. Experiments demonstrate that our targeted data augmentation significantly improves reading accuracy. Overall, Sarashina2.2-TTS achieves state-of-the-art kanji-level reading accuracy and matches top baselines on general sentence-level pronunciation, while delivering the highest speaker similarity in zero-shot Japanese speech synthesis. Furthermore, cross-lingual evaluation reveals that Sarashina2.2-TTS is the only system that maintains stable Japanese pronunciation regardless of the prompt language, confirming that our balanced training approach improves cross-lingual robustness.

09.
arXiv (CS.CL) 2026-06-11

Verifiable Environments Are LEGO Bricks: Recursive Composition for Reasoning Generalization

Reinforcement Learning (RL) with verifiable environments has emerged as a powerful approach for enhancing the reasoning capabilities of Large Language Models (LLMs). While prior research demonstrates that scaling environment quantity improves RL performance, existing manual or individual construction methods suffer from linear scaling limits, thereby hindering scalable reasoning generalization. This paper introduces RACES (Recursive Automated Composition for Environment Scaling), a framework that conceptualizes verifiable environments as composable building blocks that can be recursively assembled. The key insight is that when the codomain (output type) of one environment matches the domain (input type) of another, they can be automatically fused into a new verifiable environment, enabling recursive composition. RACES is implemented with 300 individual environments and defines a set of composition operators (\textsc{SEQUENTIAL}, \textsc{PARALLEL}, \textsc{SORT}, and \textsc{SELECT}) that induce diverse reasoning patterns. Extensive experiments show that RL training on these composite environments consistently enhances reasoning generalization. Specifically, RACES improves DeepSeek-R1-Distill-Qwen-14B by an average of 3.1 points (from 48.2 to 51.3) and boosts Qwen3-14B performance from 58.8 to 61.1 on six benchmarks, which are unseen during the construction of training environments. Moreover, RACES achieves performance comparable to training on 300 individual environments using only 50 base environments, demonstrating significant efficiency in environment utilization.

10.
arXiv (CS.CL) 2026-06-24

Agon: An Autonomous Large-Scale Omnidisciplinary Research System Built on Prompt Economy

Large language models are making research production scalable, shifting the bottleneck from producing artifacts to judging claims. We present \textsc{Agon}, a research orchestrator that validates what can be checked inside the workflow and leaves the remaining judgments to human scientists. \textsc{Agon} is built on six design principles: Prompt Economy, Future-Facing, Minimal Prompts, OmniDisciplinary, Massive Parallelism, and Zero-Code. We ran \textsc{Agon} across domains for 444 iterations of Prompt Economy loops, using only small starting topics and no human-written experimental code. These deployments demonstrate scalability while exposing new classes of failure. We organize these failures into a taxonomy along severity, fixability, visibility, and capability locus. The taxonomy separates failures the loops can see and fix from those that require human judgment. Together, these results show that \textsc{Agon} is pushing research toward a new paradigm: machine scales, human steers.

11.
arXiv (CS.LG) 2026-06-11

Online Learning for Supervisory Switching Control

arXiv:2603.14762v4 Announce Type: replace-cross Abstract: We study supervisory switching control for partially-observed linear dynamical systems. The objective is to identify and deploy a suitable controller for the unknown system by periodically selecting among a collection of $N$ candidate controllers, some of which may destabilize the underlying system. While classical estimator-based supervisory control guarantees asymptotic stability, it lacks quantitative finite-time performance bounds. Conversely, current non-asymptotic methods in both online learning and system identification require restrictive assumptions that are incompatible in a control setting, such as system stability, which preclude testing potentially unstable controllers. To bridge this gap, we propose a novel, non-asymptotic analysis of supervisory control that adapts multi-armed bandit algorithms to a control-theoretic setting. The proposed data-driven algorithm evaluates candidate controllers via scoring criteria that leverage system observability to isolate the effects of state history, enabling both detection of destabilizing controllers and accurate system identification. We present two algorithmic variants with dimension-free, finite-time guarantees, where each identifies the matching controller in $O(N \log^2 N)$ steps, while simultaneously achieving finite $L_2$-gain with respect to system disturbances.

12.
arXiv (CS.AI) 2026-06-24

video-SALMONN-R$^3$: Learning to ReWatch, ReAsk, and ReAnswer for Efficient Video Understanding

arXiv:2606.24477v1 Announce Type: cross Abstract: Video large language models (LLMs) are often constrained by computation and memory budgets, leading them to use reduced frame rates and spatial resolutions, which may cause them to miss critical information for question answering (QA). A practical and efficient solution is a two-stage paradigm: first perform coarse video understanding to localize relevant segments, and then re-watch these segments at higher temporal or spatial fidelity. In this paper, we present video-SALMONN-R$^3$, the first end-to-end video-LLM that enables re-watch through reinforcement learning without relying on chain-of-thought (CoT) cold-start. This design removes the need for costly CoT data annotations and avoids CoT-based supervised fine-tuning (SFT), which can otherwise degrade the pretrained video understanding abilities. To address the mismatch between the reasoning-first behavior induced by re-watch and the answer-first tendency of pretrained video-LLMs, we propose a re-answer strategy, in which the model first produces a direct answer in the first watch and then refines it after re-watching. Finally, to improve question adherence during re-watching, we propose a re-ask mechanism that re-injects the query when revisiting localized segments. Experimental results show that video-SALMONN-R$^3$ consistently outperforms both the base model and the QA-SFT baseline, while surpassing prior re-watch-based approaches with significantly lower computational cost. Code, models, and data will be publicly released upon acceptance.

13.
arXiv (CS.AI) 2026-06-19

See-and-Reach: Precise Vision-Language Navigation for UAVs within the Field of View

arXiv:2606.20045v1 Announce Type: cross Abstract: UAV Vision-Language Navigation (UAV-VLN) is typically formulated as a holistic search-and-reach problem, where long-range target discovery and final target approach are optimized and evaluated jointly. This formulation makes it difficult to assess a critical capability of aerial embodied agents, namely whether a UAV can accurately ground a visible target and translate vision-language evidence into precise 3D motion once the target enters its field of view. To address this limitation, we introduce UAV-VLN-FOV, a target-visible navigation task that isolates the see-and-reach stage and enables a more diagnostic evaluation of terminal reaching ability. We further propose 3DG-VLN, a vision-language waypoint prediction framework guided by dynamic 3D direction cues to enhance fine-grained visual grounding and spatial direction alignment for precise target reaching. Specifically, 3DG-VLN adaptively processes high-resolution front-view and downward-view observations to preserve fine-grained visual and geometric details for target grounding. It also updates the target-relative direction online during closed-loop navigation, allowing the agent to maintain spatial alignment with the target and reduce accumulated direction drift. To support this task, we construct a dedicated high-resolution benchmark which contains 2,717 trajectories with target-oriented high-level instructions, high-resolution front-view and downward-view egocentric observations, and continuous 3D waypoint annotations. Experiments show that 3DG-VLN outperforms competitive UAV-VLN baselines, achieving a 13.82\% improvement in success rate. Real-world trials further demonstrate the potential of 3DG-VLN for practical see-and-reach navigation. The source code and benchmark are available at https://github.com/xuefanfu/3DG-VLN.

14.
arXiv (CS.CV) 2026-06-25

Learning Action Priors for Cross-embodiment Robot Manipulation

Most Vision-Language-Action (VLA) models build on a Vision-Language Model (VLM) backbone by attaching an action module and optimizing the full policy jointly. This design inherits strong visual and linguistic priors from the VLM, but leaves the action module to learn physical motion almost from scratch. As a result, the policy lacks an explicit motion prior, forcing early optimization to simultaneously discover temporal action dynamics and cross-modal alignment, a challenge further amplified in cross-embodiment settings. In this work, we propose to pretrain the action module with motion priors before cross-modal VLA alignment. Specifically, we introduce a two-stage training framework that equips the action module with cross-embodiment temporal motion structure before VLA training begins. In Stage~1, a lightweight flow-matching-based encoder-decoder action module efficiently learns temporal motion structure solely from unconditioned action trajectories, without processing visual or language tokens. In Stage~2, this learned prior is transferred to VLA training through decoder reuse and early-stage latent distillation, aligning visual-language features with the action embedding space while still allowing end-to-end policy refinement. In addition, the trained encoder serves as a compact history compressor, summarizing state-action histories into a single temporal context token for history-aware modeling at negligible cost. Extensive experiments across 13 diverse cross-embodiment tasks on both simulated and real-world platforms validate the effectiveness of our approach. Compared with VLA training without action priors, our model achieves faster convergence, higher success rates, and substantially stronger performance on data-scarce real-world tasks. Moreover, scaling up the action data in Stage~1 yields a more generalizable action prior that directly improves downstream VLA performance.

15.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.

16.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

17.
arXiv (CS.CL) 2026-06-16

Beyond Retrieval: Learning Compact User Representations for Scalable LLM Personalization

Personalizing large language models requires adapting model behavior to individual users while preserving robustness and deployment-scale efficiency. Existing approaches typically personalize LLMs either at the input level, by retrieving user histories or constructing profile prompts, or at the parameter level, by maintaining user-specific parameter-efficient modules. The former makes personalization sensitive to retrieval quality and prompt design, whereas the latter incurs storage and maintenance costs that grow with the user population. To address these limitations, we propose TAP-PER (Temporal Attentive Prefix for PERsonalization), a prefix-based framework that encodes user preferences as learnable representations, eliminating explicit prompt construction and replacing heavy per-user adapters with lightweight user-state prefix embeddings. Inspired by personalized recommendation systems, TAP-PER decomposes user modeling into user-state and query-conditioned components, and incorporates temporal signals to capture the evolving nature of user interests. Experiments on six LaMP tasks show that TAP-PER consistently outperforms prompt-based and model-based baselines across classification, rating, and generation settings. Moreover, TAP-PER uses 130x fewer per-user parameters than OPPU and roughly half the total parameter footprint of PER-PCS at the 1,000-user scale, demonstrating that scalable LLM personalization can be achieved without explicit prompt construction or heavy per-user adapters.

18.
arXiv (CS.CL) 2026-06-25

MedLayBench-V: A Large-Scale Benchmark for Expert-Lay Semantic Alignment in Medical Vision Language Models

Medical Vision-Language Models (Med-VLMs) have achieved expert-level proficiency in interpreting diagnostic imaging. However, current models are predominantly trained on professional literature, limiting their ability to communicate findings in the lay register required for patient-centered care. While text-centric research has actively developed resources for simplifying medical jargon, there is a critical absence of large-scale multimodal benchmarks designed to facilitate lay-accessible medical image understanding. To bridge this resource gap, we introduce MedLayBench-V, the first large-scale multimodal benchmark dedicated to expert-lay semantic alignment. Unlike naive simplification approaches that risk hallucination, our dataset is constructed via a Structured Concept-Grounded Refinement (SCGR) pipeline. This method enforces strict semantic equivalence by integrating Unified Medical Language System (UMLS) Concept Unique Identifiers (CUIs) with micro-level entity constraints. MedLayBench-V provides a verified foundation for training and evaluating next-generation Med-VLMs capable of bridging the communication divide between clinical experts and patients.

19.
arXiv (CS.LG) 2026-06-17

NoiseTilt: Noise-Tilted Reverse Kernels for Diffusion Reward Alignment

arXiv:2606.18066v1 Announce Type: new Abstract: We introduce the Noise-Tilted Reverse Kernel (NTRK), a reward-guided diffusion sampler that injects reward gradients through the noise term, leaving the pretrained reverse kernel unchanged and requiring only a single sample per step. Reward-guided sampling at inference time has greatly expanded the versatility of pretrained diffusion models. Yet existing methods face a trade-off. Gradient-based guidance shifts the reverse mean, steering generation but pushing intermediate states outside the region that the model was trained on and degrading quality. Search-based methods preserve quality but gain no gradient signal. No prior method achieves both. NTRK resolves this by keeping the reverse mean fixed and biasing the noise term toward high reward. We introduce a whitening operator, the central mechanism behind NTRK, that makes the reward gradient safe to inject as noise without losing its guiding signal. Across various reward alignment tasks, NTRK outperforms recent state-of-the-art baselines without losing sample quality. Remarkably, on aesthetic generation, NTRK surpasses the reward of the best baseline at 500 NFEs using only 25 NFEs, a 20$\times$ reduction in compute.

20.
arXiv (CS.CV) 2026-06-17

MLLMs Get It Right, Then Get It Wrong: Tracing and Correcting Late-Layer Textual Bias

When vision contradicts text, multimodal large language models (MLLMs) consistently favor text, even when images provide clear evidence otherwise. This bias poses risks for applications requiring visual grounding, yet its cause remains unclear. In this paper, we uncover a surprising finding: models often get it right initially, forming correct vision-based predictions in their intermediate layers, before changing their minds and favoring text in the final output. We call this "late-layer textual override". The visual information is encoded, it simply does not survive to the output. More intriguingly, we find that how predictions change reveals whether they're correct: 85% of failures shift toward text, while 89% of successes shift toward vision. This directional signature enables a simple but powerful intervention: when we detect a confident visual prediction being suppressed, we restore it. We propose CALRD (Conflict-Aware Layer Reference Decoding), a training-free method that recovers overridden predictions at inference time. Experiments across five MLLMs of varying architectures demonstrate up to 9.4% absolute improvements on conflict benchmarks while largely preserving standard performance, without training or external knowledge. It recovers what the model already knew but failed to preserve.

21.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

22.
arXiv (CS.AI) 2026-06-18

SciRisk-Bench: A Risk-Dimension-Aware Benchmark for AI4Science Safety

arXiv:2606.18936v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly embedded in AI for Science (AI4Science) workflows, from scientific question answering and literature analysis to laboratory planning and autonomous discovery. This progress creates an urgent need for safety benchmarks that evaluate not only scientific competence, but also whether models recognize and avoid risks in high-stakes scientific contexts. Existing AI4Science safety datasets cover several disciplines and task formats, leaving the underlying risk dimensions underspecified. We introduce SciRisk-Bench, a benchmark designed to evaluate AI4Science safety from two complementary perspectives: explicit risk dimensions and scientific disciplines. SciRisk-Bench covers 7 disciplines, 31 subdisciplines and 10 risk dimensions. In the experimental section, we evaluate both mainstream LLMs and science-oriented LLMs across risk dimensions, disciplines, and sub-disciplines, enabling fine-grained diagnosis of where scientific models remain unsafe.

23.
arXiv (CS.AI) 2026-06-18

MIDS: Detecting Stealthy Masquerade and Tampering Attacks on CAN Bus via Bidirectional Mamba

arXiv:2606.18599v1 Announce Type: cross Abstract: The Controller Area Network (CAN) protocol is the primary communication standard for Electronic Control Units (ECUs) in modern vehicles, but its lack of encryption and authentication exposes it to a range of security threats. Existing intrusion detection systems are largely tuned to fabrication-style attacks (DoS, fuzzing, ID spoofing realised by frame injection), in which detection signals such as per-ID inter-arrival statistics are readily available. We instead address the harder masquerade setting[b37], in which an internal adversary substitutes a legitimate frame in-situ at its original transmission slot, preserving traffic periodicity and rendering traffic-statistic defences ineffective. We propose the Mamba Intrusion Detection System (MIDS), an innovative dual-stream framework that processes CAN identifiers and payloads in parallel and reconstructs their joint temporal semantics through bidirectional selective state-space modelling. To evaluate MIDS, we collected over 100 million CAN frames from a physical Tesla Model 3 across three driving regimes and synthesised 54 masquerade attack variants spanning ID-only, data-only, and combined modifications. MIDS attains an F1 of 96.94\% on this dataset, exceeding the strongest reproducible baseline by more than 8 percentage points, while sustaining a 1.147~ms single-window inference latency – ample headroom for real-time onboard deployment. To verify generalisation, we further evaluate MIDS on four public benchmarks (ROAD, CrySyS, OTIDS, CT\&T) covering both masquerade and injection scenarios; MIDS attains F1 from 93.70\% to 99.61\%, outperforming the strongest of eight reproduced baselines by up to 13.94 percentage points under a unified 5-fold protocol.

24.
arXiv (CS.LG) 2026-06-24

EnerInfer: Energy-Aware On-Device LLM Inference

arXiv:2606.23001v1 Announce Type: cross Abstract: On-device LLM inference is increasingly attractive for privacy-preserving, reliable, and cost-effective deployment, yet its energy and thermal costs remain a critical bottleneck. Existing systems primarily optimize for decoding speed, implicitly assuming that faster execution is always preferable. We show instead that on-device LLM inference often has exploitable configuration slack: modestly lowering NPU and memory frequencies preserves quality of experience (QoE) while substantially improving energy efficiency and reducing heat. Realizing this opportunity in production is challenging. The most energy-efficient NPU/DDR setting varies with the model, inference engine, platform, and runtime conditions, with no stable ranking across configurations. Commercial devices further lack component-level power sensing, and shell temperature evolves with request arrivals, response lengths, and thermal history. To address these challenges, we propose EnerInfer, the first on-device LLM inference framework that jointly manages energy efficiency, throughput, and thermal comfort for LLM workloads. EnerInfer replaces per-model profiling and sensor-heavy control with disaggregated, model-structure-aware prediction and ranking-driven online feedback. It predicts throughput and power for unseen LLMs across NPU/DDR frequency settings, selects QoE-satisfying efficient configurations under runtime interference, and uses lightweight limited-horizon thermal prediction to dynamically switch between energy-optimized and thermally constrained inference. Evaluations on real-world LLMs show that EnerInfer improves energy efficiency by up to 65%, 12%, and 24% on phones, a laptop, and a development board, respectively, without QoE violation.

25.
arXiv (CS.AI) 2026-06-19

Review of Machine Learning Models for Solar Energetic Particle Prediction

arXiv:2606.19539v1 Announce Type: cross Abstract: Solar energetic particle (SEP) events have attracted increasing attention due to their significant radiation hazards for aviation, spacecraft electronics, and human missions beyond Earth's magnetosphere. From a scientific perspective, SEP events are intriguing because they arise from a set of physical processes extending from the solar surface and corona through the heliosphere, offering insight into particle acceleration and transport mechanisms that are widely applicable across astrophysics. Therefore, advancing our ability to understand and predict SEP events is essential both for deepening our knowledge of such mechanisms and for safeguarding space technologies and exploration. Traditionally, researchers have modeled SEPs using physics-based simulations and empirical methods. More recently, machine learning (ML) has emerged as a new tool for understanding and predicting SEP events. The purpose of this manuscript is to review the currently available ML models for SEP prediction, identify the datasets used for training, compare their architectures, inputs, and outputs, and, based on these insights, outline good practices and recommendations for future research.