×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Young ×
换一批
01.
medRxiv (Medicine) 2026-06-10

A Three-Tier Operational Benchmark for Evaluating Large Language Models on Hospital Medication Safety

Objective. To introduce PsiBench, a clinically validated medication-safety benchmark for evaluating large language models (LLMs) against the standards used to certify hospital computerized provider order entry (CPOE) and electronic health record (EHR) systems, and a non-overlapping three-tier evaluation framework separating highest-stakes discrimination, the operational CDS regime, and category-correct alerting. Materials and Methods. PsiBench comprises 492 medication-safety scenarios across 11 safety categories, created by clinical pharmacology experts whose work underpins an annualized testing procedure used by more than 2,000 U.S. hospitals. The three-tier framework partitions the scenarios non-overlappingly: Discrimination (98 scenarios, 50 fatal vs 48 deception, near-balanced 51%/49%); Operational (394 scenarios, 261 serious unsafe plus 133 safe including 41 Excessive Alerts reclassified as operational negatives); and Attribution (311 alert-required scenarios). We evaluated 40 frontier LLMs from 10 providers over 3 runs per scenario at temperature 0.2 (or the provider default where temperature is not configurable), yielding 59,040 evaluations conducted April 21-23, 2026. Results. Headline binary performance on the full benchmark spans a wide range across the 40 models: F1 78.5%-92.3%, accuracy 65.4%-89.8%, sensitivity 81.4%-100.0%, specificity 6.1%-81.8%. Leading models by F1 (o4-mini 92.3%; o3 92.2%) pair high sensitivity with meaningful specificity; three models saturate sensitivity at 100% but fall below 25% specificity, indistinguishable from a naive always-alert classifier. The wide spread on a single headline metric motivates tier-specific analyses, developed in a separate clinical paper. Discussion and Conclusion. PsiBench and the three-tier framework operationalize a rigorous evaluation rubric for LLM medication safety, grounded in two decades of national hospital audit experience. The framework generalizes to any binary medication-safety classifier (rule-based, conventional ML, or LLM-driven), supporting tier-aware model selection and post-deployment surveillance.

02.
arXiv (CS.AI) 2026-06-17

Temporal Preference Optimization for Unsupervised Retrieval

arXiv:2606.17664v1 Announce Type: cross Abstract: Unsupervised dense retrievers offer scalability by learning semantic similarity from unlabeled documents via contrastive learning, but they struggle to capture the temporal relevance, retrieving semantically related but temporally misaligned documents-an important aspect when a document collection spans multiple time periods (e.g., retrieving documents from 2018-2025 for "Who is the president in 2019?" introduces temporal ambiguity). Existing methods rely on supervised training with explicit timestamps, which are not always feasible. We propose TPOUR (Temporal Preference Optimization for Unsupervised Retriever), which uses our novel training method Temporal Retrieval Preference Optimization (TRPO). TRPO reinterprets preference learning in the temporal dimension, guiding the retriever to favor temporally aligned documents. TPOUR further generalizes to unseen time periods via interpolation in a learned time embedding, enabling continuous temporal alignment. Experiments on temporal information retrieval (T-IR), TPOUR outperforms both unsupervised and supervised baselines. Compared to Qwen-Embedding-8B, despite being about 72.7x smaller, TPOUR Contriever improves average nDCG@5 by +4.04 (+12.15%) on explicit and +4.98 (+15.21%) on implicit queries. We provide our code at https://github.com/agwaBom/TPOUR.

03.
arXiv (CS.CL) 2026-06-12

NaturalFlow: Reducing Disruptive Pauses for Natural Speech Flow in Simultaneous Speech-to-Speech Translation

Simultaneous speech-to-speech translation aims to enable near-real-time communication by minimizing latency, offering a compelling, real-time alternative to the high latency of consecutive translation. However, the excessive pursuit of low latency often results in fragmented chunk-wise speech. Consequently, listeners are subjected to an unnatural acoustic flow punctuated by frequent pauses, which could increase their cognitive load. To bridge this gap, we introduce a fluency-aware optimization framework designed to discover the sweet spot between the low-latency benefits of simultaneous translation and the natural flow of consecutive translation. Our framework minimizes inter-chunk silences by leveraging model-internal signals, including linguistic diversity and induced temporal variability in speech durations. Experiments on short- and long-form benchmarks show that our framework produces natural speech flow while maintaining competitive latency and translation quality.

04.
arXiv (CS.CV) 2026-06-16

Stepwise Token Selection for Efficient Multimodal Large Language Models

In multimodal large language models (MLLMs), inference cost is largely dominated by the visual token prefix rather than the language backbone, making token reduction a key factor for improving efficiency. Existing approaches typically assign independent importance scores to visual tokens and retain a fixed number of top-ranked tokens, implicitly assuming token independence and a uniform compression ratio across inputs. In this work, we reformulate visual token pruning as a sequential decision-making process. Specifically, we introduce a pointer-style selection mechanism that iteratively chooses informative tokens, conditioning each decision on previously selected ones, and dynamically determines when to stop via a learned termination action. This enables joint optimization of both the selected subset and its size. To enable end-to-end training under standard language modeling objectives, we design a differentiable relaxation based on a variance-preserving noise interpolation scheme, allowing gradients to propagate through the discrete selection process. Extensive experiments on LLaVA-v1.5-7B and Qwen2.5-VL-7B demonstrate that our approach consistently outperforms fixed-ratio baselines across different compression levels. Under aggressive pruning that removes 88.9% of visual tokens, our method preserves 94.6% of the original accuracy while achieving a 1.88x speed-up in prefill latency.

05.
arXiv (CS.CL) 2026-06-12

RAGPPI: RAG Benchmark for Protein-Protein Interactions in Drug Discovery

Retrieving the biological impacts of protein-protein interactions (PPIs) is essential for target identification (Target ID) in drug development. Given the vast number of proteins involved, this process remains time-consuming and challenging. Large Language Models (LLMs) and Retrieval-Augmented Generation (RAG) frameworks have supported Target ID; however, no benchmark currently exists for identifying the biological impacts of PPIs. To bridge this gap, we introduce the RAG Benchmark for PPIs (RAGPPI), a factual question-answer benchmark of 4,420 question-answer pairs that focus on the potential biological impacts of PPIs. Through interviews with experts, we identified criteria for a benchmark dataset, such as a type of QA and source. We built a gold-standard dataset (500 QA pairs) through expert-driven data annotation. We developed an ensemble auto-evaluation LLM that incorporates expert labeling characteristics, average fact-abstract similarity (F1), and low-similarity fact counts (F2), enabling the construction of a silver-standard dataset (3,720 QA pairs). We are committed to maintaining RAGPPI as a resource to support the research community in advancing RAG systems for drug discovery QA solutions.

06.
arXiv (CS.CV) 2026-06-12

PROBE: Probabilistic Occupancy BEV Encoding with Analytical Translation Robustness for 3D Place Recognition

We present PROBE (PRobabilistic Occupancy BEV Encoding), a learning-free LiDAR place recognition descriptor that models each BEV cell's occupancy as a Bernoulli random variable. Rather than relying on discrete point-cloud perturbations, PROBE analytically marginalizes over continuous Cartesian translations via the polar Jacobian, yielding a distance-adaptive angular uncertainty $\sigma_\theta = \sigma_t / r$ in $\mathcal{O}(R{\cdot}S)$ time. The primary parameter $\sigma_t$ represents the expected translational uncertainty in meters, a sensor-independent physical quantity that enhances cross-sensor generalization while reducing the need for extensive per-dataset tuning. Pairwise similarity combines a Bernoulli-KL Jaccard with exponential uncertainty gating and FFT-based height cosine similarity for rotation alignment. Evaluated on four datasets spanning four diverse LiDAR types, PROBE achieves the highest accuracy among handcrafted descriptors in multi-session evaluation and competitive single-session performance relative to both handcrafted and supervised baselines. The source code and supplementary materials are available at https://sites.google.com/view/probe-pr.

07.
arXiv (CS.CL) 2026-06-19

Source-Grounded Data Generation for Text-to-JSON Learning

From financial filings to clinical records, legacy industries rely heavily on long, unstructured documents to store high-value information. Reliably extracting this information into structured, machine-readable representations is a key prerequisite to making the contents accessible to automated systems. JSON is a natural target for such structured extraction, yet constructing reliable and scalable text-to-JSON training data remains challenging. To address this gap, we propose STAGE (Spreadsheet-grounded Text-to-JSON Artifact GEneration), a source-grounded data generation pipeline that constructs reports and JSON schema by using LLMs for scalable synthesis while validating ground-truth values against the underlying spreadsheet. Evaluations on STAGE-Eval, our source-grounded benchmark with an 851-example test set, show that STAGE produces stronger training data than existing approaches. This improves Qwen3-4B exact match from 31.37% to 74.27% and value accuracy from 45.46% to 90.69%.

08.
arXiv (quant-ph) 2026-06-15

Landscape-Similarity-Guided Optimization in Divide-and-Conquer QAOA

arXiv:2602.21689v3 Announce Type: replace Abstract: Divide-and-conquer strategies mitigate hardware constraints for the Quantum Approximate Optimization Algorithm (QAOA) on Noisy Intermediate-Scale Quantum (NISQ) devices by partitioning large interaction graphs into smaller, hardware-compatible sub-problems. However, this approach introduces a severe classical training bottleneck: a decomposition across $m$ boundary nodes generates $2^m$ distinct sub-problems that typically require independent optimization. In this work, we demonstrate that across diverse synthetic and real-world interaction graphs, the variational landscapes of these reduced QAOA instances actually exhibit a robust universality. Adapting the replica-overlap framework of spin-glass physics, we define a landscape-overlap order parameter $q$ to quantify geometric correlations between energy landscapes, revealing a sharp landscape-similarity transition as graph connectivity is tuned. Exploiting this, we introduce Doubly Optimized QAOA (DO-QAOA), an adaptive pipeline that collapses the sub-problems from $2^m$ distinct sub-problems into $K=\mathcal{O}(1)$ effective landscape classes. By performing optimization on a single representative sub-problem and dynamically transferring parameters to remaining sub-problems, DO-QAOA lowers runtime and quantum measurement overhead by orders of magnitude while maintaining a competitive Approximation Ratio Gap (ARG).

09.
arXiv (CS.CL) 2026-06-19

Quantifying Aleatoric Uncertainty of In-Context Learning for Robust Measure of LLM Prediction Confidence

In-Context Learning (ICL) allows LLMs to adapt to new tasks from a few demonstrations, but its reliability remains a concern: predictions are highly sensitive to both prompt design and the model's ability to understand the context, obscuring whether failures arise from data properties or model limitations. Uncertainty decomposition-separating aleatoric from epistemic sources-is particularly crucial in this setting, yet existing methods, designed for standard generation tasks, fail to capture the unique dynamics of ICL. To address this, we introduce a concept of self-function vectors, built upon Bayesian views and the mechanistic interpretability of ICL. These vectors leverage internal model representations to model the latent concept learned during in-context prompting, thereby enabling a direct estimation of aleatoric uncertainty within a Bayesian framework and circumventing the reliance on brittle input or decoding manipulations. Given the lack of established benchmarks and suitable evaluation protocols, we also propose the first and rigorous evaluation protocol, in which data is manipulated in controlled ways so as to quantify aleatoric uncertainty precisely and separately from epistemic uncertainty. With this new evaluation framework, initially grounded in synthetic tasks for conceptual development and subsequently extended to real-world datasets, we show that our proposed methodology can measure uncertainty of LLM predictions made under ICL more reliably than existing alternative methods. Moreover, we show it can be used as a practical tool for trustworthy-related applications, such as hallucination detection. Our findings pave a new direction for connecting the quantitative view of uncertainty with the mechanistic understanding of model behavior.

10.
arXiv (CS.AI) 2026-06-16

SkillsBench: Benchmarking How Well Agent Skills Work Across Diverse Tasks

arXiv:2602.12670v4 Announce Type: replace Abstract: Agent Skills are structured packages of procedural knowledge that augment large language model (LLM) agents at inference time. Despite rapid adoption, there is no standard way to measure whether they actually help. We present SkillsBench, a benchmark whose current inventory contains 87 tasks across 8 domains paired with curated Skills and deterministic verifiers. Our latest aggregate evaluation runs the 87-task benchmark under matched no-Skills and curated-Skills conditions for 18 model-harness configurations. Curated Skills raise the average pass rate from 33.9% to 50.5% (+16.6 percentage points; 25.5% normalized gain), with configuration-level gains ranging from +4.1 to +25.7 pp. Focused Skills with at most three modules outperform larger or exhaustive bundles, and smaller models with Skills can match larger models without them. SkillsBench establishes paired evaluation as the foundation for rigorous measurement of Skill efficacy on agentic, expertise-heavy work.

11.
arXiv (CS.AI) 2026-06-17

Rethinking Multimodal Fusion for Time Series: Text Modalities Need Constrained Fusion

arXiv:2603.22372v2 Announce Type: replace-cross Abstract: Recent advances in multimodal learning have motivated the integration of auxiliary modalities such as text or vision into time series (TS) forecasting. However, most existing methods provide limited gains, often improving performance only in specific datasets or relying on architecture-specific designs that limit generalization. In this paper, we show that multimodal models with naive fusion strategies (e.g., simple addition or concatenation) often underperform unimodal TS models, which we attribute to the uncontrolled integration of auxiliary modalities which may introduce irrelevant information. Motivated by this observation, we explore various constrained fusion methods designed to control such integration and find that they consistently outperform naive fusion methods. Furthermore, we propose Controlled Fusion Adapter (CFA), a simple plug-in method that enables controlled cross-modal interactions without modifying the TS backbone, integrating only relevant textual information aligned with TS dynamics. CFA employs low rank adapters to filter irrelevant textual information before fusing it into temporal representations. We conduct over 20K experiments across various datasets and TS/text models, demonstrating the effectiveness of the constrained fusion methods. Code is available at: https://github.com/seunghan96/cfa.

12.
arXiv (CS.CL) 2026-06-16

LM-SPT: LM-Aligned Semantic Distillation for Speech Tokenization

With the rapid progress of speech language models (SLMs), discrete speech tokens have emerged as a core interface between speech and text, enabling unified modeling across modalities. Recent speech tokenization approaches aim to isolate semantic information from low-level acoustics to better align with language models (LMs). In particular, previous methods use self-supervised learning (SSL) teachers such as HuBERT to extract semantic representations, which are then distilled into a semantic quantizer to suppress acoustic redundancy as well as capture content-related latent structures. However, these tokenizers often operate at relatively high frame rates, producing token sequences significantly longer than their textual counterparts and hindering seamless integration with pretrained LMs. Although recent methods attempt to reduce the token rate by applying uniform average pooling to SSL features, this can over-smooth content-bearing regions and dilute the structural information, thereby potentially limiting the LM alignment. To address this, we propose LM-SPT, an LM-aligned speech tokenization method based on semantic speech-resynthesis distillation. Instead of directly matching teacher and student features via pooling, LM-SPT resynthesizes speech from semantic tokens only and minimizes the discrepancy between representations extracted from the original and resynthesized waveforms using a frozen, LM-aligned speech encoder. This indirect supervision avoids rigid temporal alignment and encourages dedicated semantic units that are more semantically aligned with LMs under reduced frame rates. Experimental results show that the proposed LM-SPT consistently outperforms previous semantic-enhanced speech tokenizers when applied to SLMs for the tasks of automatic speech recognition and text-to-speech, even without compromising the speech reconstruction fidelity at the codec level.

13.
arXiv (CS.CL) 2026-06-19

Analyzing Error Propagation in Korean Spoken QA with ASR-LLM Cascades

We analyze how automatic speech recognition (ASR) errors propagate through ASR-LLM cascades in Korean spoken question answering (SQA), focusing on downstream semantic failures that conventional ASR metrics cannot fully capture. Our analysis shows that the relative downstream degradation caused by ASR errors is consistent across LLMs with different absolute performance, suggesting that cascade degradation largely tracks ASR-stage information loss. We further identify single-character Korean ASR errors as a Korean-specific loss channel, where even a minimal transcription difference can change the intended question and degrade downstream QA performance. Finally, an auxiliary comparison shows that a large audio language model outperforms an ASR-LLM cascade with an approximately matched language backbone in noisy Korean SQA, indicating the potential of direct audio input to mitigate transcript-induced information loss.

14.
arXiv (CS.CL) 2026-06-16

Exploring Extrinsic and Intrinsic Properties for Effective Reasoning with Code Interpreter

Reasoning with a Code Interpreter (CI) has emerged as an effective paradigm for enhancing the reasoning capabilities of large language models (LLMs) through executable computation and iterative verification. Despite its growing adoption, the behavioral properties underlying effective code reasoning remain largely underexplored. In this work, we investigate code reasoning from two distinct perspectives inspired by prior studies of natural language reasoning: extrinsic properties, represented by crucial tokens, and intrinsic properties, represented by code-specific cognitive behaviors. Across multiple LLMs, we find that stronger CI reasoning models consistently exhibit a higher prevalence of crucial tokens and cognitive behaviors, particularly verification, backtracking, and backward chaining. Building on these observations, we examine how these properties can be leveraged during both inference and training. At inference time, appending code-specific crucial tokens improves performance on several reasoning capabilities, including mathematical, ordering, and optimization, while yielding limited benefits elsewhere. At training time, augmenting a state-of-the-art framework with code-specific cognitive behaviors improves supervised fine-tuning and reinforcement learning performance in two of three evaluated models. Further analysis shows that these behaviors reduce overthinking in incorrect responses and improve token efficiency, while also revealing factors that limit gains in a certain model. Our findings provide the first systematic characterization of effective reasoning with CI and demonstrate both the potential and limitations of leveraging key properties to improve CI-based reasoning.

15.
arXiv (CS.CV) 2026-06-18

Rethinking the Pointer Loss in Table Structure Recognition: Geometry-Aware Pointer Loss for Spatial Locality

Table Structure Recognition (TSR) using a pointer network achieves impressive results by predicting HTML sequences while aligning tags to detected text (or cell) regions. However, our analysis reveals that when pointer networks fail, 79.6% of errors occur between spatially adjacent cells (Manhattan distance

16.
arXiv (CS.CV) 2026-06-17

EmbodiTTA: Resource-Efficient Test-Time Adaptation for Embodied Visual Systems

Continual Test-time adaptation (CTTA) continuously adapts the deployed model on every incoming batch of data. While achieving optimal accuracy, existing CTTA approaches present poor real-world applicability on resource-constrained edge devices, due to the substantial memory overhead and energy consumption. In this work, we first introduce a novel paradigm – on-demand TTA – which triggers adaptation only when a significant domain shift is detected. Then, we present OD-TTA, an on-demand TTA framework for accurate and efficient adaptation on edge devices. OD-TTA comprises three innovative techniques: 1) a lightweight domain shift detection mechanism to activate TTA only when it is needed, drastically reducing the overall computation overhead, 2) a source domain selection module that chooses an appropriate source model for adaptation, ensuring high and robust accuracy, 3) a decoupled Batch Normalization (BN) update scheme to enable memory-efficient adaptation with small batch sizes. Extensive experiments show that OD-TTA achieves comparable and even better performance while reducing the energy and computation overhead remarkably, making TTA a practical reality.

17.
arXiv (CS.LG) 2026-06-18

Robust and Interpretable Adaptation of Equivariant Materials Foundation Models via Sparsity-promoting Fine-tuning

arXiv:2606.18691v1 Announce Type: new Abstract: Pre-trained materials foundation models, or machine learning interatomic potentials, leverage general physicochemical knowledge to effectively approximate potential energy surfaces. However, they often require domain-specific calibration due to physicochemical diversity as well as mismatches between practical computational settings and those used in constructing the pre-training data. To address this, we propose a sparsity-promoting fine-tuning method that selectively updates model parameters by exploiting the structural properties of E(3)-equivariant materials foundation models. On energy and force prediction tasks across molecular and crystalline benchmarks, our method matches or surpasses full fine-tuning and equivariant low-rank adaptation while updating only $\sim$3~\% of parameters, and in some cases as little as $\sim$0.5~\%. Beyond energy and force calibration, we further demonstrate task generalizability by applying our method to magnetic moment prediction and magnetism-aware total energy modeling. Finally, analysis of sparsity patterns reveals physically interpretable signatures, such as enhanced $d$-orbital contributions in transition metal systems. Overall, our results establish sparsity-promoting fine-tuning as a flexible and interpretable method for domain specialization of equivariant materials foundation models.

18.
arXiv (CS.LG) 2026-06-11

Quantum Occam Learning: Sample-Supported Expressibility for Circuit-Based Quantum Learning

arXiv:2606.12211v1 Announce Type: cross Abstract: A central principle in quantum machine learning is that an ansatz should be expressive enough to represent the quantum data of interest. Yet, the expressibility is statistically meaningful only insofar as it can be learned from finitely many copies of an unknown quantum state. In this work, we develop an information-theoretic Occam theory for quantum data generated by finite-size quantum circuits. For the class $S_{n,G}$ of $n$-qubit pure states preparable with at most $G$ two-qubit gates, a metric-entropy argument gives the realizable sample law $\widetilde{\Theta}(G/\epsilon^2)$ in the circuit-limited regime. For an arbitrary source $\hat{\rho}$, we introduce the best $G$-gate approximation error $d_G(\hat{\rho})$ and the approximate circuit complexity $C_\eta(\hat{\rho})$. We prove an agnostic quantum Occam theorem: with $M$ copies, one can learn up to the best $G$-gate approximation error plus a statistical penalty $\widetilde{O}(\sqrt{G/M})$. We then remove the need to know $G$ in advance through an adaptive model-selection theorem whose oracle inequality selects the circuit complexity justified by the data. Matching lower bounds yield a sample-supported expressibility law: at trace-distance accuracy $\epsilon$, $M$ samples can support only $G_supported \simeq M\epsilon^2$ gates, up to logarithmic factors and tomography saturation at $2^n$. Thus, the circuit complexity becomes an adaptive statistical resource rather than a static promise. Our framework turns bounded circuit complexity into a model-selection principle for quantum machine learning.

19.
arXiv (quant-ph) 2026-06-15

Jones-matrix analysis of phase accumulation in a linear-optical multi-pass interferometer

arXiv:2606.14422v1 Announce Type: new Abstract: Quantum information science has traditionally relied on nonclassical resources, such as entangled photon pairs and squeezed states, to achieve measurement performance beyond classical limits. Here, we revisit the multi-pass photonic scheme reported in Nature 450, 393 (2007) to clarify the physical origin of the observed superresolution and the associated claim of supersensitivity. Using a rigorous Jones-matrix formalism, we show that the round-trip evolution of the HQMQ linear optics unit is equivalent to the product of two reflections in polarization space, resulting in an effective rotation operator. This equivalence reveals that the accumulated phase arises from coherent polarization-state rotation on the Poincare'e sphere. The resulting phase accumulation is interpreted geometrically as a progressive realignment of the polarization state during successive forward and backward propagations. To validate the theoretical model, a classical-wave implementation is experimentally conducted, analyzed, and compared with the corresponding Jones-matrix solution. Finally, the scaling behavior of the Fisher information is analyzed to examine the origin of the claimed supersensitivity. The results are further compared with a recently developed coherence de Broglie wavelength framework, which achieves identical superresolution through repeated coherent interactions in a cascaded interferometeric architecture.

20.
arXiv (CS.AI) 2026-06-16

HOLO-MPPI: Multi-Scenario Motion Planning via Hierarchical Policy Optimization

arXiv:2606.16480v1 Announce Type: cross Abstract: Robots deployed in the real world must plan motions across diverse scenarios without per-scenario retuning. End-to-end reinforcement learning (RL) can generalize across scenarios but often becomes brittle under distribution shift, reward misspecification, and stochastic interactions. Model predictive path integral (MPPI) control enables strong real-time refinement without gradients, but its performance depends on a well-shaped sampling prior, while manually designing the priors does not scale to multi-scenario deployment. We present HOLO-MPPI (High-level Offline, Low-level Online MPPI), a multi-scenario motion planning framework that combines high-level policy learning with low-level stochastic optimal control. Offline, we learn a high-level policy that proposes scenario-robust plans in an abstract action space, with a learned world model for online rollout. Online, the policy serves as a data-driven prior generator that parameterizes MPPI's sampling distribution conditioned on the current observation and goal. MPPI then optimizes low-level control sequences around this prior in real time to adapt to local disturbances. We instantiate HOLO-MPPI in autonomous driving by designing an effective high-level action space and tailored model architectures. Our evaluation across diverse driving scenarios shows that HOLO-MPPI improves upon MPPI and end-to-end RL baselines while maintaining real-time control.

21.
arXiv (CS.CV) 2026-06-18

Hand-4DGS: Feed-Forward 3D Gaussian Splatting for 4D Hand Reconstruction from Egocentric Videos

Dynamic 3D hand reconstruction from egocentric videos is essential for next-generation computing platforms such as AR/VR and AI glasses. Despite its importance, most prior works focus either on multi-view 3D hand reconstruction or on 4D human body reconstruction. Egocentric 4D hand reconstruction remains challenging due to fast head motion, rapid hand dynamics, severe occlusions, and inherent ambiguity from single-view observations. To address these challenges, we introduce Hand-4DGS, the first feed-forward framework for reconstructing dynamic 4D hands directly from egocentric videos, enabling both fast (~60 FPS) inference and strong generalization. Our approach incorporates a mesh-guided representation for structural priors and temporal convolutions to model dynamic motion. We evaluate our framework on two challenging egocentric datasets, H2O and ARCTIC, and demonstrate significant improvements over baselines. Our method benefits from the generalization capability of feed-forward networks and effective 2D image supervision through Gaussian splatting, without requiring expensive 3D hand pose ground-truth annotations.

22.
arXiv (CS.CV) 2026-06-12

MAMVI: 3D Test-Time Adaptation via Masked Multi-View Point Clouds

3D point cloud models suffer significant performance degradation under distribution shifts caused by sensor noise, occlusions, and environmental changes. Test-time adaptation (TTA) has emerged as a practical paradigm for mitigating this issue during inference. Recently, leveraging multi-view augmentation has shown promise in improving 3D TTA performance. However, existing multi-view approaches are often constrained by sequential optimization that treats each view independently. This sequential optimization leads to substantial inference latency due to repetitive optimization steps, making real-time adaptation impractical. To address this, we propose Masked Multi-View Test-Time Adaptation (MAMVI), which replaces sequential optimization with a unified single-step adaptation. Specifically, MAMVI utilizes a hybrid masking strategy that combines fixed ratios for stability with Beta-distributed sampling for diversity. By aggregating losses across multiple views, MAMVI performs adaptation through a single backward pass based on multi-view consensus. Additionally, a confidence-based adaptive learning rate is used to dynamically adjust the adaptation intensity for each sample. Extensive experiments on ModelNet-40C, ShapeNet-C, and ScanObjectNN-C demonstrate that MAMVI achieves state-of-the-art accuracy on ShapeNet-C and ScanObjectNN-C. Moreover, it remains competitive on ModelNet-40C while delivering 4.9-8.9 times faster inference, making it highly suitable for real-time applications. Our code is available at https://github.com/Inseok-kong/MAMVI

23.
arXiv (CS.LG) 2026-06-12

DeepJEB++: Foundation Model-Driven Large-Scale 3D Engineering Dataset via 2D Latent Space Augmentation

arXiv:2606.12994v1 Announce Type: new Abstract: Data-driven engineering design is constrained by the lack of large-scale 3D datasets that pair geometry with physics-based performance labels. In particular, existing 3D data augmentation techniques have limitations in preserving subtle and diverse geometric variations, and it remains difficult to automate the subsequent simulation-labeling process, where boundary conditions vary depending on the generated geometry. We present DeepJEB++, a foundation-model-driven data-augmentation framework that expands a small seed set of jet engine brackets into a large, simulation-labeled 3D dataset under constrained resources. Our key idea is to augment in the data-rich 2D latent space, then transfer to 3D. In Stage 1, we fine-tune a pretrained 2D latent diffusion model on multi-view renders and synthesize novel views by latent interpolation, retaining manufacturable designs through a vision-language-model (VLM) quality filter. In Stage 2, the validated images are lifted to 3D meshes by a domain-adapted generative foundation model. In Stage 3, an automated pipeline recognizes the load and bolt interfaces on each mesh and assigns finite-element labels – mass, stress, and displacement – without manual intervention. We assess augmentation quality along three intrinsic axes: manufacturability, label fidelity against the SimJEB ground truth, and distributional consistency. Starting from fewer than 400 seed designs, DeepJEB++ yields 15,360 simulation-labeled 3D brackets – a 40x expansion – using a single GPU per stage. The dataset will be made publicly available to support reproducible engineering-AI research.

24.
arXiv (math.PR) 2026-06-16

Quantitative Oppenheim Conjecture for Random Quadratic Forms and Optimal Variance Bounds in Function Fields

arXiv:2606.16699v1 Announce Type: cross Abstract: We prove a quantitative version of Oppenheim's conjecture in the function field setting. In order to do so, we compute the higher moments of the Siegel transform. In particular, we find an optimal bound on the variance of the number of lattice points in a set. Moreover, we compute the exact variance of the number of lattice points in a ball, which is of independent interest.

25.
arXiv (CS.AI) 2026-06-18

Improving Scientific Document Retrieval with Academic Concept Index

arXiv:2601.00567v2 Announce Type: replace-cross Abstract: Adapting general-domain retrievers to scientific domains is challenging due to the scarcity of large-scale domain-specific relevance annotations and the substantial mismatch in vocabulary and information needs. Recent approaches address these issues through two independent directions that leverage large language models (LLMs): (1) generating synthetic queries for fine-tuning, and (2) generating auxiliary contexts to support relevance matching. However, both directions overlook the diverse academic concepts embedded within scientific documents, often producing redundant or conceptually narrow queries and contexts. To address this limitation, we introduce an academic concept index, which extracts key concepts from papers and organizes them guided by an academic taxonomy. This structured index serves as a foundation for improving both directions. First, we enhance the synthetic query generation with concept coverage-based generation (CCQGen), which adaptively conditions LLMs on uncovered concepts to generate complementary queries with broader concept coverage. Second, we strengthen the context augmentation with concept-focused auxiliary contexts (CCExpand), which leverages a set of document snippets that serve as concise responses to the concept-aware CCQGen queries. Extensive experiments show that incorporating the academic concept index into both query generation and context augmentation leads to higher-quality queries, better conceptual alignment, and improved retrieval performance.