×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Yi Xiao ×
换一批
01.
arXiv (CS.AI) 2026-06-16

A First-Principles Derivation of LLM Policy Optimization: From Expected Reward to GRPO and Its Structural Extensions

arXiv:2606.16733v1 Announce Type: new Abstract: Policy gradient algorithms for language models optimize the same objective $J(\theta) = \mathbb{E}*{\tau \sim p*\theta(\tau)}[R(\tau)]$, which has exactly two factors: the trajectory probability $p_\theta(\tau)$ and the reward $R(\tau)$. Every method from REINFORCE to PPO to GRPO and their descendants modifies one or both factors to address a specific failure in the preceding formulation. Existing surveys organize these methods by domain or chronology, which obscures the rationale behind each design choice and the precise location of its intervention within the gradient estimator. This survey revisits the landscape of LLM policy optimization from $J(\theta)$ on first principles and uses the trajectory side, induced by $p_\theta(\tau)$, and the reward side, induced by $R(\tau)$, as the two axes along which methods are located. It covers the path from REINFORCE and PPO to GRPO, as well as post-GRPO variants, Agentic RL, and GRPO-OPD. The resulting framework is unified, diagnostic, and extensible: it analyzes methods from a shared objective, identifies which side each method modifies and why, and applies the same trajectory and reward axes across these settings. Across these settings, the framework also exposes compound failures that no single-side fix resolves and that therefore require joint design of the trajectory side and the reward side. The boundary cases and coupled failures identified by this map mark where existing solutions run out and provide a principled starting point for designing the next generation of LLM policy optimization algorithms.

02.
arXiv (CS.CV) 2026-06-18

VidCRAFT3: Camera, Object, and Lighting Control for Image-to-Video Generation

Controllable image-to-video (I2V) generation transforms a reference image into a coherent video guided by user-specified control signals. While precise control over camera motion, object motion, and lighting is essential for high-fidelity creation, existing methods often treat these factors independently. This overlooks the physical coupling among viewpoint, geometry, and illumination in dynamic scenes, leading to visual inconsistencies such as mismatched shadows and perspective drift under simultaneous changes. We present VidCRAFT3, a unified and flexible I2V framework that explicitly models cross-factor interactions among geometry, motion, and illumination, enabling both independent and joint control over camera motion, object motion, and lighting direction. Image2Cloud provides explicit 3D geometric priors for accurate camera motion control. ObjMotionNet encodes sparse object trajectories into multi-scale motion features to guide realistic object motion. A Spatial Triple-Attention Transformer integrates lighting direction through lighting cross-attention for consistent relighting. To address the scarcity of jointly annotated data, we construct the VideoLightingDirection (VLD) dataset with accurate per-frame lighting direction annotations, and introduce a three-stage progressive training strategy that enables robust learning without fully joint annotations. Extensive experiments demonstrate that VidCRAFT3 achieves state-of-the-art performance in control precision and visual coherence across diverse scenarios.

03.
arXiv (CS.CV) 2026-06-16

Ultra Flash: Scaling Real-Time Streaming Video Generation to High Resolutions

While recent autoregressive video diffusion models achieve remarkable streaming quality, they remain confined to low resolutions (e.g., 480P), leaving efficient, scalable, real-time high-resolution video generation a fundamental open challenge. To bridge this gap, we present Ultra Flash, a cascaded streaming framework capable of real-time high-resolution video generation. Ultra Flash achieves ~30 FPS at 1K resolution and ~18 FPS at 2K resolution on a single GPU through three key contributions: (1) an architecture-preserving T2V-to-TV2V super-resolution training paradigm coupled with an AIGC-oriented data degradation pipeline that effectively preserves the generative capability of the base model, enabling enhanced high-resolution detail when cascaded after mainstream low-resolution generative models; (2) a causal streaming latent upsampler paired with a high-resolution decoder, which enhances spatiotemporal coherence while enabling efficient latent spatial scaling and precise high-resolution decoding with negligible computational overhead; and (3) a cascade high-resolution streaming video generation optimization scheme that first performs hybrid-reward-enhanced sparse causalization and single-step distillation of the super-resolution model, then introduces cascaded streaming self-forcing preference optimization with dynamic cache management, jointly enhancing overall coherence, improving quality, and enabling real-time high-resolution streaming video generation. Extensive experiments demonstrate that Ultra Flash reliably produces ultra-high-resolution streaming video while maintaining state-of-the-art visual quality and superior efficiency. Project Page: https://xin1u.github.io/UltraFlash/

04.
arXiv (CS.AI) 2026-06-16

PANDA: An LLM-Enhanced Performance-Driven Analog Design Framework Bridging Design Intent and Layout Generation

arXiv:2606.15052v1 Announce Type: cross Abstract: Traditional design of analog circuits heavily relies on manual interventions across topology, sizing, and layout, with prior automation addressing stages in isolation. In this work, we propose PANDA, an LLM-enhanced framework that bridges high-level design intent to final layout by actively managing cross-stage dependencies through guided topology synthesis, substructure-aware sizing, and constraint-driven layout generation. This shifts automation from algorithm-centric execution to intent-centric co-design, reducing turnaround time from days or weeks to hours while improving design performance.

05.
arXiv (CS.AI) 2026-06-11

Using Explainability as a Training-Time Reliability Signal for Efficient ECG Classification

arXiv:2606.12252v1 Announce Type: cross Abstract: Training deep neural networks for clinical time-series analysis is computationally demanding, yet many healthcare settings lack the resources required for repeated model development and deployment. This challenge is particularly evident in electrocardiogram classification, where large datasets and long training schedules make efficiency practically important. Progressive Data Dropout reduces training cost by excluding samples from gradient updates once they are learned, but it relies on model confidence and may retain samples that are difficult due to noise or ambiguity rather than useful signal. In this work, we introduce ERTS, an explainability-based reliability training signal for efficient ECG classification. ERTS uses explanation quality during training to distinguish between informative and unreliable uncertainty. Building on progressive data selection, we compute Grad-CAM attention maps for candidate samples and derive a focus score that measures whether model predictions are supported by coherent and localised patterns. Samples with low focus are filtered out, while those with meaningful attention are prioritised for gradient updates. We evaluate ERTS across three ECG datasets and multiple backbone architectures, showing consistent improvements in macro-F1 alongside reduced effective training cost. These results suggest that explanation quality can serve as a practical signal for improving both efficiency and reliability in clinical time-series learning. Code will be released.

06.
arXiv (CS.CV) 2026-06-12

EvTexture++: Event-Driven Texture Enhancement for Video Super-Resolution

Event-based vision has drawn increasing attention owing to its distinctive properties, including ultra-high temporal resolution and extreme dynamic range. Recent works have introduced it to video super-resolution (VSR) to enhance flow estimation and temporal alignment. In contrast, this paper shifts the focus of event signals from motion refinement to texture enhancement in VSR. We propose EvTexture++, the first event-driven framework dedicated to texture enhancement in VSR. It leverages high-frequency spatiotemporal details from events to improve texture recovery. EvTexture++ incorporates a customized texture enhancement branch, along with an iterative texture enhancement module that progressively exploits high-temporal-resolution event information for texture restoration. This enables gradual refinement of texture regions across iterations, yielding more accurate and detailed high-resolution outputs. Besides intra-frame texture recovery, large motions could degrade inter-frame temporal consistency, particularly in texture regions, leading to texture flickering. To mitigate this, we further exploit the continuous-time motion cues of events to enhance temporal consistency, introducing a temporal texture alignment module that estimates event-guided texture-aware flow for precise inter-frame texture alignment. Moreover, EvTexture++ is designed as a plug-and-play tool to flexibly boost the performance of existing VSR models. Experiments on five datasets demonstrate that EvTexture++ achieves state-of-the-art performance. When integrated into recent VSR models, it yields significant improvements, with gains of up to 1.55 dB in PSNR on the texture-rich Vid4 dataset. Code: https://github.com/DachunKai/EvTexture.

07.
arXiv (CS.AI) 2026-06-11

TouchThinker: Scaling Tactile Commonsense Reasoning to the Open World with Large-scale Data and Action-aware Representation

arXiv:2606.11637v1 Announce Type: new Abstract: Touch is a key modality for embodied agents to understand the physical world. Although recent work has incorporated tactile signals into language systems for tactile commonsense reasoning, scaling such systems to realistic open-world settings remains challenging due to two key bottlenecks: (1) current tactile reasoning datasets remain limited in format and scale, providing insufficient supervision for reasoning from tactile observations to physical commonsense and hindering the learning of transferable tactile commonsense; (2) Tactile signals are inherently redundant and action-specific, yet existing methods often overlook these properties, resulting in inefficient representations with limited semantic expressiveness. To address these limitations, we propose TouchThinker, a tactile-language framework that scales tactile commonsense reasoning to the open world from both data and representation perspectives. First, we construct TouchThinker-1M, a million-scale, multi-source tactile reasoning dataset covering 415 objects, 8 scenarios, and 7 sensor types, providing a solid data foundation for open-world generalization. We further introduce TouchThinker-Bench, an open-world benchmark with more realistic and diverse tasks. Then, we propose action-aware modeling mechanism to improve tactile representation efficiency and enable efficient reasoning. Experimental results demonstrate that TouchThinker achieves competitive performance against state-of-the-art models across multiple datasets. Our code and dataset will be made available at: https://github.com/lvkailin0118/TouchThinker.

08.
arXiv (CS.CV) 2026-06-16

Kairos: A Native World Model Stack for Physical AI

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.

09.
arXiv (CS.CV) 2026-06-16

GeoStream: Toward Precise Camera Controlled Streaming Video Generation

Accurate interactive camera control is essential for video-based world models, but most existing approaches learn camera motion implicitly, leading to inaccurate control under out-of-distribution trajectories. Explicit geometric conditioning improves controllability, but existing methods are non-autoregressive and rely on a static 3D cache built from an initial frame, which becomes ineffective once the viewpoint moves beyond the original frustum. We propose GeoStream, a framework that enables precise metric-scale camera control in autoregressive streaming video generation. Our method maintains a self-refreshing 3D cache that is periodically updated online from the model's own outputs: we estimate depth from the most recently generated frame, unproject to 3D, and reproject into the target view to produce point reprojections as geometric conditioning for subsequent synthesis. By the same principle, the conditioning seen during training is also rendered from the student's own generated frames, yielding a fully on-policy distillation that naturally aligns the train and inference conditioning distributions. Unlike prior work that uses off-policy condition noising, our approach trains the model against the exact error distribution it encounters at inference, mitigating both standard autoregressive drift and the second-order geometric feedback loop that arises when the cache itself is derived from generated outputs. Quantitative and qualitative results show that our approach substantially improves camera controllability.

10.
arXiv (CS.CV) 2026-06-11

Reason, Then Re-reason: Cross-view Revisiting Improves Spatial Reasoning

Spatial reasoning from egocentric videos is inherently challenging because the observable evidence is constrained by the camera trajectory. Existing methods rely on single-turn inference, forcing models to resolve geometric ambiguity through semantic priors rather than verifiable evidence. We argue that spatial reasoning should be revisitable: conclusions formed under limited evidence should remain open to revision when complementary viewpoints become available. Building on this insight, we propose Reason, then Re-reason (ReRe), a training-free, inference-time framework with two phases: in the Reason Phase, an MLLM forms a spatial hypothesis from the original video; in the Re-reason Phase, it verifies or revises the hypothesis by observing a synthesized novel-view video. To enable effective cross-view revisiting, we design a Geometry-to-Video pipeline that renders strategically complementary novel views from predicted 3D geometry. These views feature an elevated, oblique perspective with scene-spanning coverage, while preserving the MLLM's native video interface without architectural modifications. Extensive evaluations on VSI-Bench and STI-Bench demonstrate that ReRe substantially boosts open-source MLLMs to rival proprietary state-of-the-art performance. Project page: https://zhenjiemao.github.io/ReRe/

11.
arXiv (CS.AI) 2026-06-16

Estimating Mutual Information between Time Series and Temporal Event Sequences Across Diverse Analysis Tasks

arXiv:2606.01602v2 Announce Type: replace-cross Abstract: Pairwise dependence measures such as correlation and causality are fundamental to temporal data mining, yet there is still no principled and robust way to quantify dependence between heterogeneous data types, especially between continuous time series and discrete temporal event sequences. Existing approaches rely on ad hoc transformations or mutual-information estimators that are highly sensitive to quantization, repeated values, and event redundancy, leading to biased or unstable results in practice. We propose a nonparametric mutual information estimator that directly measures the dependence between time series and event sequences without data transformation, learning, or ad hoc discretization. Our method models the continuous-discrete duality of real-world time series to handle quantization and repeated-value artifacts and introduces a latent event clustering strategy to mitigate bias from event co-occurrence and redundancy. Together, these yield a robust and unified framework that bridges discrete and continuous mutual information. We evaluate the proposed estimator on four representative tasks: discrete-continuous time-delayed mutual information for causality analysis, global and local temporal repetition discovery, discrete covariate selection for time series forecasting, and continuous feature selection for classification. Experiments on synthetic and real-world datasets show consistent improvements over existing methods in accuracy, robustness, and interpretability, positioning our approach as a general-purpose dependence operator for heterogeneous temporal data, similar to Pearson correlation for homogeneous time series. Code available at: https://github.com/HaojiHu/Multimodal-Temporal-Data-Quantification

12.
arXiv (CS.LG) 2026-06-16

FlowRL: A Taxonomy and Modular Framework for Reinforcement Learning with Diffusion Policies

arXiv:2603.27450v2 Announce Type: replace Abstract: Thanks to their remarkable flexibility, diffusion models and flow models have emerged as promising candidates for policy representation. However, efficient reinforcement learning (RL) upon these policies remains a challenge due to the lack of explicit log-probabilities for vanilla policy gradient estimators. While numerous attempts have been proposed to address this, the field lacks a unified perspective to reconcile these seemingly disparate methods, thus hampering ongoing development. In this paper, we bridge this gap by introducing a comprehensive taxonomy for RL algorithms with diffusion/flow policies. To support reproducibility and agile prototyping, we introduce a modular, JAX-based open-source codebase that leverages JIT-compilation for high-throughput training. Finally, we provide systematic and standardized benchmarks across Gym-Locomotion, DeepMind Control Suite, and IsaacLab, offering a rigorous side-by-side comparison of diffusion-based methods and guidance for practitioners to choose proper algorithms based on the application. Our work establishes a clear foundation for understanding and algorithm design, a high-efficiency toolkit for future research in the field, and an algorithmic guideline for practitioners in generative models and robotics. Our code is available at https://github.com/typoverflow/flow-rl.

13.
arXiv (CS.CV) 2026-06-11

BiWM: Advancing Open-Source Interactive Video World Models with Bidirectional Autoregression

Transitioning bidirectional video diffusion models into an autoregressive paradigm improves the interactivity of video world models, but existing causal pipelines need many stages (control fine-tuning, autoregressive training, causal initialization, few-step distillation) and still trail bidirectional models in quality due to error accumulation. Recent world models such as Yume-1.5 and Matrix-Game-3.0 instead adopt a bidirectional autoregressive approach, gaining fidelity and stable long-horizon rollout from self-correcting error propagation, yet open-source frameworks (e.g., minWM) support only causal models. We present BiWM, the first full-stack framework for interactive video world models under the bidirectional autoregressive paradigm, jointly optimizing generation quality and inference speed. From a pretrained video backbone, BiWM injects camera control by fine-tuning, then runs a few-step Distribution Matching Distillation (DMD) stage that turns the backbone into an action/camera-controllable world model: just two training stages instead of four in minWM, converging in a few hundred steps on 8xH200 GPUs. A single recipe spans Wan2.1-1.3B, Wan2.2-5B, HunyuanVideo-1.5-8B, and LTX-2.3-22B, and also supports secondary fine-tuning of existing bidirectional models. BiWM enables real-world camera control where minWM loses controllability, integrates pluggable history compression (FramePack-style and PackForcing-style) for long rollouts, and offers an optional NVFP4 4-bit training/inference pipeline. To counter DMD's mode-seeking degradation, we add GAN and mass-covering forward-KL objectives that preserve scene dynamics. We open-source BiWM for resource-constrained research and high-fidelity environment simulation.

14.
arXiv (CS.LG) 2026-06-16

Near-Optimal Stochastic Linear Bandits with Delay

arXiv:2606.16656v1 Announce Type: new Abstract: We study stochastic linear bandits with delayed feedback under several delay models and establish near-optimal regret guarantees. Our results identify when delayed linear bandits exhibit the same qualitative behavior as multi-armed bandits (MAB), and when the linear structure creates fundamentally new challenges. Specifically, (1) for loss-independent delays, where the delay does not depend on the realized loss (but potentially depends on the arm), we show that delays incur only an additive regret penalty. Under stochastic delays, this penalty scales with the expected delay, while under adversarial delays, it scales with the maximum number of outstanding observations. Notably, both delay penalties are dimension-free, improving upon the state-of-the-art results; (2) for loss-dependent delays, we show that linear bandits are substantially harder than MAB: unlike in MAB, we prove matching (up to log factors) upper and lower bounds in linear bandits, whose delay penalty depends on the square root of the dimension. (3) for the delay-as-payoff model, a special case of loss-dependent delay, we show that the optimal MAB guarantee, which depends only on the delay of the optimal arm, is also unattainable in linear bandits. Together, these results provide a sharp characterization of how delayed feedback interacts with linear generalization.

15.
arXiv (CS.CV) 2026-06-17

BusterX++: Towards Unified Cross-Modal AI-Generated Content Detection and Explanation with MLLM

The rapid advancement of generative AI has substantially improved image and video synthesis, amplifying the risk of multimodal visual misinformation. Recent MLLMs have shown promise for transparent AI-generated content detection through reasoning and explanation, yet existing approaches largely treat image and video forensics as isolated tasks, leaving cross-modal synergies underexplored. To address this, we present BusterX++, a unified MLLM for joint image and video detection with interpretable reasoning. We also introduce GenBuster-Bench++, a meticulously curated, difficulty-aligned benchmark containing balanced image and video samples spanning recent generation models and diverse real-world scenarios. Using this controlled setting, we revisit the widely adopted $SFT \rightarrow RL$ post-training paradigm. Notably, our findings demonstrate that a single-stage, pure RL strategy driven strictly by sparse outcome rewards consistently matches or surpasses a strong SFT+RL baseline across both unified and single-modality settings. Our key insight reveals that SFT imposes lower policy entropy, which restricts the policy search space and dampens exploratory freedom. In contrast, single-stage pure RL maintains higher policy entropy throughout training, effectively unlocking the spontaneous emergence of cross-modal capability transfer between image and video forensics. Extensive experiments demonstrate that BusterX++ achieves state-of-the-art performance, highlighting the powerful potential of RL for unified cross-modal visual reasoning.

16.
arXiv (CS.AI) 2026-06-16

UXBench: Measuring the Actionability of LLM-Generated UX Critiques

arXiv:2606.16262v1 Announce Type: cross Abstract: Large language models (LLMs) are increasingly deployed as UX judges that inspect interfaces, diagnose usability problems, and propose repairs. Yet no controlled benchmark measures whether the resulting critiques are reliable and actionable across heterogeneous product surfaces. We introduce UXBench, a benchmark for evaluating LLMs as interaction-grounded UX judges. UXBench comprises local-first runnable web fixtures spanning ten product-surface families, paired with coverage-gated browser exploration that forces models to collect interaction evidence before reporting. Each judge model produces a structured UX report over seven rubric dimensions; report quality is measured by whether a fixed downstream repair agent can improve the interface based on the critique. We evaluate eight frontier models under both an automated repair-lift protocol and a blind human validation study. Results show that UX judging is neither saturated nor one dimensional: models differ meaningfully in report actionability, exhibit distinct rubric-level repair signatures, vary in fixture-level reliability, and trade leadership across surface categories

17.
arXiv (CS.CV) 2026-06-11

Damage-TriageFormer: A Foundation-Model Framework for Typology-Based Building Damage Assessment from Mono-Temporal Imagery

Decision-relevant building damage assessment is critical for prioritizing resources and recovery after a disaster, yet most automated methods either flatten damage into a single severity scale (no damage, minor, major, destroyed) or require paired pre- and post-event imagery that is often unavailable for emerging hazards. This paper presents Damage-TriageFormer, a single-image, post-event, footprint-conditioned model that produces a damage typology rather than a severity scale. We contribute: (1) DamageTriage-Bench, a new benchmark built from NOAA Emergency Response Imagery across Hurricane Michael (2018), Hurricane Helene (2024), and the 2025 Los Angeles wildfire complex, with five typology classes that distinguish roof damage from structural damage and, within each, partial from total extent; and (2) Damage-TriageFormer, which extends a DINOv3 ViT-L backbone with a Simple Feature Pyramid for higher-resolution instance pooling, a two-stage gated damage head, and an auxiliary severity-regression objective. Our model achieves macro F1 of 0.624 on validation and 0.619 on a held-out stratified test set, performing strongest where operational triage needs it most, with per-class F1 of 0.91 and 0.84 on undamaged buildings and total structural collapse, respectively. While the rare Total Roof Damage class remains difficult due to its limited examples and an inherently ambiguous label boundary, our results show that single-image post-event imagery can support actionable building damage typing, enabling targeted emergency response and resource allocation without a pre-event reference.

18.
arXiv (CS.AI) 2026-06-17

Handling Feature Heterogeneity with Learnable Graph Patches

arXiv:2606.17667v1 Announce Type: cross Abstract: In recent years, the rapid development of foundation models and graph pre-training technologies has spurred increasing interest in constructing a universal pre-trained graph model or Graph Foundation Model (GFM). However, a significant challenge is that existing models are unable to address feature heterogeneity in graph data without textual information, which hinders the transferability of graph models across different datasets. To bridge this gap, we propose the concept of learnable graph patches, which we regard as the smallest semantic units of any graph data. We decompose the graph into learnable graph patches by unfolding the node features and constructing corresponding patch structures separately. We then design a framework that mines transferable information from graph data across domains. Specifically, after extracting graph patches, we propose a patch encoder to extract knowledge from each unit and a patch aggregator to learn how the units are combined into a whole. Due to its domain-agnostic nature, the model can be applied to downstream data across different domains. Furthermore, we analyze the connection between our method and existing graph models, as well as the transferability of the node embeddings it generates. Empirically, our method not only achieves the capability to use multi-domain graphs for pre-training, but also shows enhanced performance across various downstream datasets and tasks. Moreover, we observe consistent improvement in downstream performance as the volume of pre-training data increases.

19.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

20.
arXiv (CS.CV) 2026-06-16

RealityBridge: Bridging Editable 3D Gaussian Splatting Driving Simulations and Real-World Videos

Long-tail hazardous scenarios are essential for safety-oriented autonomous driving, yet they are difficult to collect and reproduce at scale. Editable 3D Gaussian Splatting (3DGS) simulation offers a promising alternative by reconstructing real driving scenes and supporting controllable scene editing. However, edited 3DGS-rendered videos still suffer from a significant Sim-to-Real gap, including rendering artifacts, degraded foreground assets, inconsistent illumination, and temporal flickering. Existing restoration and video generation methods are insufficient for this task, as they often fail to jointly repair 3DGS-specific artifacts, improve visual realism, and ensure temporal consistency. To fill this gap, we propose RealityBridge, a structure-preserving and asset-aware Sim-to-Real framework for edited 3DGS driving videos. RealityBridge uses multimodal controls, including rendered videos, foreground masks, edge maps, and semantic masks, together with a lightweight GateNet for adaptive condition allocation across backbone layers. We further construct targeted training data and introduce autoregressive long-video training with reward-guided post-training to improve restoration quality, temporal stability, and hallucination suppression. Extensive experiments on internal and public driving datasets show that RealityBridge outperforms existing methods in artifact removal, illumination harmonization, and long-sequence temporal consistency.

21.
arXiv (CS.CV) 2026-06-16

Qwen-RobotWorld Technical Report: Unifying Embodied World Modeling through Language-Conditioned Video Generation

We introduce Qwen-RobotWorld, a language-conditioned video world model for embodied intelligence. With natural language as a unified action interface, it predicts physically grounded future visual trajectories from current observations across robotic manipulation, autonomous driving, indoor navigation, and human-to-robot transfer. This unified formulation provides three promising application directions: synthetic data generation for policy training augmentation, scalable virtual environments for policy evaluation, and language-guided planning signals for downstream robot control. This is achieved through a three-part design: a) Double-Stream MMDiT with MLLM Action Encoding, where a 60-layer double-stream diffusion transformer couples frozen Qwen2.5-VL semantics with video-VAE latents through layer-wise joint attention; b) Embodied World Knowledge (EWK), an 8.6M video-text corpus (200M+ frames) with action-language mapping over 20+ embodiments and 500+ action categories; and c) General+Expert Progressive Curriculum, a two-stage training strategy that first learns general visual priors and then injects embodied specialization under a shared language interface. Extensive results show strong competitiveness: ranks 1st overall on EWMBench and DreamGen Bench, outperforms all open-source models on WorldModelBench and PBench. Additional zero-shot analyses on RoboTwin-IF benchmark further support robust generalization and multi-view consistency.

22.
arXiv (CS.LG) 2026-06-19

DADP: Domain Adaptive Diffusion Policy

arXiv:2602.04037v3 Announce Type: replace Abstract: Learning domain adaptive policies that can generalize to unseen transition dynamics, remains a fundamental challenge in learning-based control. Substantial progress has been made through domain representation learning to capture domain-specific information, thus enabling domain-aware decision making. We analyze the process of learning domain representations through dynamical prediction and find that selecting contexts adjacent to the current step causes the learned representations to entangle static domain information with varying dynamical properties. Such mixture can confuse the conditioned policy, thereby constraining zero-shot adaptation. To tackle the challenge, we propose DADP (Domain Adaptive Diffusion Policy), which achieves robust adaptation through unsupervised disentanglement and domain-aware diffusion injection. First, we introduce Lagged Context Dynamical Prediction, a strategy that conditions future state estimation on a historical offset context; by increasing this temporal gap, we unsupervisedly disentangle static domain representations by filtering out transient properties. Second, we integrate the learned domain representations directly into the generative process by biasing the prior distribution and reformulating the diffusion target. Extensive experiments on challenging benchmarks across locomotion and manipulation demonstrate the superior performance, and the generalizability of DADP over prior methods. More visualization results are available on the https://outsider86.github.io/DomainAdaptiveDiffusionPolicy/.

23.
arXiv (CS.AI) 2026-06-16

Toward Vibe Medicine: A Self-Evolving Multi-Agent Framework for Clinical Decision Support

arXiv:2606.15504v1 Announce Type: new Abstract: In recent years, the advances of large language models and autonomous agents have revolutionized the healthcare field, facilitating diagnosis and improving treatment results. However, most existing AI systems rely on pre-trained knowledge and predefined pipelines, which struggle to learn dynamically from the interactive chat session history that contains patient outcomes and past failures. To address this limitation, we propose VIBEMed, a multi-agent framework with a built-in self-evolution mechanism and architecture-level safety sandbox for robust clinical decision support. The system integrates three specialized agents, including a Clinical Diagnostic Agent (CDA) for hypothesis generation, a Therapeutic Execution Agent (TEA) for treatment planning, and a Clinical Evolution Manager Agent (CEMA) that distills longitudinal clinical feedback into reusable knowledge, transforming multimodal patient information into personalized medical decisions. Through self-evolution mechanism, the framework enables iterative updates across memory, model behavior, and decision strategies, allowing the system to improve over time. Experimental results show that VIBEMed demonstrates superior performance through its evolving mechanism in complex clinical cases, particularly in tasks that require integrated decision-making and longitudinal planning. The framework also supports reliable end-to-end decisions in challenging scenarios such as oncology treatment planning, highlighting its feasibility in real-world clinical contexts. Overall, VIBEMed provides a practical path beyond static AI systems toward adaptive, experience-driven clinical decision support, demonstrating the value of combining multi-agent collaboration with continuous evolution for advancing precision medicine.

24.
arXiv (CS.AI) 2026-06-12

HarnessBridge: Learnable Bidirectional Controller for LLM Agent Harness

arXiv:2606.12882v1 Announce Type: new Abstract: Large language models are increasingly deployed as agents for long-horizon tasks, yet their performance is shaped not only by model capability and environment design, but also by the harness that mediates agent–environment interaction. Existing harnesses are largely manually engineered, making them difficult to scale as trajectories grow longer and interactions become more complex. In this work, we ask whether harness can be generated by a learnable plug-in module that can be trained in an end-to-end fashion. We introduce HarnessBridge, a lightweight learnable harness controller that parameterizes the agent–environment interface as a bidirectional projection. HarnessBridge learns two bidirectional projections: observation projection, which distills raw trajectories into compact, decision-relevant states, and action projection, which converts proposed actions into executable transitions or trajectory-grounded rejections. We train HarnessBridge on a harness supervision dataset via unified instruction tuning. On Terminal-Bench~2.0 and SWE-bench Verified, HarnessBridge matches or surpasses strong specialized harnesses while substantially reducing token usage and trajectory length, and generalizes from smaller generators to larger commercial models.

25.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.