×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Yang You ×
换一批
01.
arXiv (CS.CV) 2026-06-19

FrozenDrive: Zero-Shot Text-Guided Driving Scene Generation and Data Augmentation with Parameter-Free Frozen Diffusion Model

Synthetic data for autonomous driving is surging, powered by diffusion models that promise scalable scene generation. Yet key obstacles remain, as enforcing multi-view and temporal consistency often relies on backbone fine-tuning or added layers, which erodes pre-trained knowledge and weakens text alignment. Models also stay close to the training distribution, struggling under adverse weather and unseen configurations, and fidelity favors frequent over rare classes. We address these gaps with FrozenDrive, a controllable generative framework that preserves a pretrained diffusion models knowledge while achieving strong consistency. FrozenDrive conditions on rich driving-stack signals and text prompts, and introduces knowledge-preserving spatio-temporal attention to impose cross-view alignment and temporal coherence in a single pass within a parameter-free frozen diffusion backbone. An additional object-focused constraint improves per-object fidelity for rare categories. Without any weather- or scene-specific fine-tuning, our model synthesizes globally coherent multi-view driving scenes from text, particularly under adverse and rare conditions, and surpasses prior baselines. On nuScenes, FrozenDrive augmented data significantly improves AD models performance, especially at night and in rain, demonstrating stronger robustness when trained with our scenario-targeted data.

02.
arXiv (quant-ph) 2026-06-19

Topological Quantum Interferometry

arXiv:2606.19730v1 Announce Type: new Abstract: Structured light provides high-dimensional Hilbert spaces holding tremendous potential for fundamental quantum optics and quantum technologies. However, existing characterization methods, like Hong-Ou-Mandel (HOM) interference, typically assume perfectly tuned conditions, overlooking the geometric physics governing spatial mode evolution. Here, we establish topological quantum interferometry driven by an interaction-based geometric phase, the exchange Berry phase (BPX). Our formalism generalizes $q$-plate state generation and characterization to arbitrary topological charges and (de)tuning conditions, demonstrating that BPX acts as a geometric marker governing spatial interference. We show BPX serves as a deterministic control parameter, decomposing two-photon spatial patterns into geometry-dictated fundamental modes. This mapping reveals topological invariants and phase singularities that function as a non-tomographic witness for state dimensionality estimation, circumventing full-state reconstruction. Being device-independent and highly scalable, this approach enables scalable high-dimensional characterization and topologically protected state selection, with direct applicability to quantum metrology and high-capacity quantum networks.

03.
arXiv (CS.LG) 2026-06-19

Learning universal approximations for partial differential equations with Physics-Informed Broad Learning System

arXiv:2606.19754v1 Announce Type: new Abstract: Partial differential equations (PDEs) play a central role in modeling complex physical, biological, and engineering systems. While traditional numerical solvers are robust, they often incur prohibitive computational costs due to mesh dependencies, whereas recent Physics-Informed Neural Networks (PINNs) offer a mesh-free alternative but frequently suffer from slow convergence and optimization instability. To bridge this gap, this article proposes the Physics-Informed Broad Learning System (PIBLS), a novel backpropagation-free framework that reformulates PDE solving as a direct least-squares optimization. We improved an algorithm within this framework to handle nonlinear PDEs efficiently and provide a rigorous mathematical proof establishing the universal approximation property of PIBLS for these equations. Experiments on linear and nonlinear PDEs demonstrate that PIBLS is one to three orders of magnitude faster than conventional PINNs while achieving significantly higher solution accuracy. This framework provides a computationally efficient paradigm for scientific machine learning, offering a practical, high-speed alternative for real-time simulation and design optimization tasks.

04.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

05.
arXiv (CS.LG) 2026-06-18

Robust and Interpretable Adaptation of Equivariant Materials Foundation Models via Sparsity-promoting Fine-tuning

arXiv:2606.18691v1 Announce Type: new Abstract: Pre-trained materials foundation models, or machine learning interatomic potentials, leverage general physicochemical knowledge to effectively approximate potential energy surfaces. However, they often require domain-specific calibration due to physicochemical diversity as well as mismatches between practical computational settings and those used in constructing the pre-training data. To address this, we propose a sparsity-promoting fine-tuning method that selectively updates model parameters by exploiting the structural properties of E(3)-equivariant materials foundation models. On energy and force prediction tasks across molecular and crystalline benchmarks, our method matches or surpasses full fine-tuning and equivariant low-rank adaptation while updating only $\sim$3~\% of parameters, and in some cases as little as $\sim$0.5~\%. Beyond energy and force calibration, we further demonstrate task generalizability by applying our method to magnetic moment prediction and magnetism-aware total energy modeling. Finally, analysis of sparsity patterns reveals physically interpretable signatures, such as enhanced $d$-orbital contributions in transition metal systems. Overall, our results establish sparsity-promoting fine-tuning as a flexible and interpretable method for domain specialization of equivariant materials foundation models.

06.
arXiv (CS.CV) 2026-06-18

Physics in 2-Steps: Locking Motion Priors Before Visual Refinement Erases Them

Image-to-Video diffusion models leverage input images to generate visually stunning content, yet frequently produce motion that violates physical laws. We reveal a surprising finding: a 2-step generation often exhibits better physical consistency than a 50-step output from the same model. Through spectral analysis, we trace this to phase erosion during denoising; the phase degrades significantly (dropping by $\approx 18\%$ from step 2 to step 50), whereas the magnitude remains relatively stable. Building on this insight, we propose PhaseLock, a training-free framework that preserves the valid motion priors from few-step inference throughout the denoising trajectory. Rather than relying on full-step inference for physical consistency, PhaseLock extracts a motion prior from just 2 steps and enforces it onto high-fidelity generation via Latent Delta Guidance. Our approach effectively mitigates phase degradation, improving physical consistency by an average of 6.2 points across diverse models while largely maintaining visual fidelity, with negligible overhead ($1.06\times$ time, $1.02\times$ memory) and reduced reliance on expensive external guidance methods ($\sim5\times$ time). Project Page: https://dnwjddl.github.io/phaselock

07.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

08.
arXiv (CS.CV) 2026-06-18

RegimeVGGT: Layer-Wise Spatially Preserving Redundancy Removal for Visual Geometry Grounded Transformer

Visual Geometry Grounded Transformer (VGGT) recovers dense 3D scene structure from multi-view images in one forward pass, but quadratic cross-frame attention limits its scalability. Existing training-free accelerators reduce computation uniformly along one axis, missing layer heterogeneity. Our spectral, probing, and causal analyses reveal three regimes: shallow layers lack cross-view structure, middle layers drive cross-view alignment, and deep layers are redundant for dense geometry yet their cross-frame attention remains essential for pose. RegimeVGGT applies layer-wise U-shaped compression along two axes: Saliency-Guided Banded Merging protects geometry- and edge-salient tokens, while Selectively Protected K/V Downsampling preserves cross-frame spatial coverage and the pose-critical path through a phase-shifted spatial grid, a reference-frame anchor, and uncompressed camera/register tokens. Training-free, RegimeVGGT achieves a 6.7x speedup over VGGT* at matched reconstruction quality.

09.
arXiv (quant-ph) 2026-06-17

Effects of Josephson Junction Non-idealities on Adiabatic Quantum Flux Parametron Circuits

arXiv:2606.17338v1 Announce Type: new Abstract: Adiabatic quantum flux parametron (AQFP) gate is a promising approach to scale up the cryogenic microwave electronics for superconducting qubit multiplexed control. However, the performance of these circuits depends on the quality of the Josephson junctions which are ideally superconductor-insulator-superconductor (SIS) type following the ideal sinusoidal relation between current and quantum phase. We demonstrate how the non-sinusoidal current-phase relation in Superconductor-Normal metal-Superconductor (SNS) and weak link (WL) junctions affects the speed, delay, and margin of the AQFP gates. The JJ models are defined in the Keysight ADS simulator using symbolically defined device (SDD) method.

10.
arXiv (CS.AI) 2026-06-17

DeMaVLA: A Vision-Language-Action Foundation Model for Generalizable Deformable Manipulation

arXiv:2605.31286v2 Announce Type: replace-cross Abstract: Real-world household robots require Vision-Language-Action (VLA) foundation models that can acquire reusable manipulation skills across diverse objects, task conditions, and household environments. Deformable-object folding is a representative challenge, requiring robots to handle clothing items from random initial states across varying categories, geometries, materials, and scenes. However, existing VLA systems commonly train separate policies for different object categories, while naively mixed multi-task training often suffers from task interference and degraded performance. To move beyond category-specific folding policies, we introduce DeMaVLA, a VLA foundation model for generalizable Deformable Manipulation. DeMaVLA adopts a VLM backbone with an action expert and formulates continuous action generation using flow matching. To improve efficiency, the action expert is constructed by pruning every other transformer layer while preserving layer-wise alignment with the VLM backbone, reducing training and inference cost. DeMaVLA is first pre-trained on approximately 5,000 hours of selected real-world dual-arm demonstrations to acquire general manipulation priors. It is then post-trained on mixed folding data that aggregates self-collected demonstrations and corrective trajectories from real-robot failures across multiple folding tasks through a human-in-the-loop Data Aggregation~(DAgger) pipeline. Experiments show that DeMaVLA achieves competitive performance on RoboTwin 2.0 and strong real-world results on our household folding benchmark. These results highlight the value of scalable real-world data, efficient action generation, and corrective learning for general-purpose VLA policies in deformable-object manipulation.

11.
arXiv (CS.CL) 2026-06-17

PACE-RAG: Patient-Aware Contextual and Evidence-Constrained RAG for Clinical Drug Recommendation

Drug recommendation requires a deep understanding of individual patient context, especially for complex conditions like Parkinson's disease. While LLMs possess broad medical knowledge, they fail to capture the subtle nuances of actual prescribing patterns. Existing RAG methods also struggle with these complexities because guideline-based retrieval remains too generic and similar-patient retrieval often replicates majority patterns without accounting for the unique clinical nuances of individual patients. To bridge this gap, we propose PACE-RAG (Patient-Aware Contextual and Evidence-Constrained RAG). Rather than directly copying frequent medications from retrieved patients, PACE-RAG personalizes recommendations by first extracting patient-specific clinical features, retrieving cases around these features, and then refining the final prescription using the patient's current symptoms, active medication history, and focus-specific prescribing tendencies. By analyzing treatment patterns tailored to specific clinical features, PACE-RAG generates patient-specific medication recommendations along with an explainable clinical summary. Evaluated on a Parkinson's cohort and the MIMIC-IV benchmark using Llama-3.1-8B and Qwen3-8B, PACE-RAG achieved state-of-the-art performance, reaching F1 scores of 80.84% and 47.22%, respectively. These results suggest that PACE-RAG is a robust and clinically grounded framework for personalized decision support. Our code is available at: https://github.com/ChaeYoungHuh/PACE-RAG.

12.
arXiv (CS.CL) 2026-06-17

GameCraft-Bench: Can Agents Build Playable Games End-to-End in a Real Game Engine?

Game generation is an emerging application of coding agents, requiring models to transform natural-language specifications into playable interactive systems. Unlike traditional coding tasks, game generation takes place within a game engine, where scripts, scenes, assets, rendering, and runtime interactions must jointly produce coherent gameplay. We formalize end-to-end game generation as the problem of producing a complete game artifact that realizes a specification through observable player-game interaction in a target environment. We argue that evaluating this setting requires three desiderata: Engine Grounding, Artifact Completeness, and Interactive Verification. We propose an interaction-grounded evaluation framework that assesses executable gameplay through replayed demonstrations and rubric-guided multimodal judging. We instantiate this framework as GameCraft-Bench, a benchmark comprising 140 Godot tasks across 15 game families. Evaluations of frontier coding agents show that end-to-end game generation remains highly challenging: the strongest agent achieves only 41.46%, and most agents score below 40%. Further analysis reveals that while agents often implement recognizable mechanics, they struggle to deliver complete games with sufficient content, functional visual feedback, and coherent presentation. See https://tongxuluo.github.io/gamecraft-bench-website for demos, code, and data.

13.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

14.
arXiv (CS.AI) 2026-06-16

From Detection to Recovery: Operational Analysis on LLM Pre-training with 504 GPUs

arXiv:2605.09370v5 Announce Type: replace-cross Abstract: Large-scale AI training is fundamentally a distributed systems problem, where hardware failures are routine operating conditions rather than rare exceptions, yet public operational evidence from production training clusters remains limited. This report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The environment is cross-organizational: five parties (SKT, Upstage, Lablup, NVIDIA Korea, VAST Data) share a unified monitoring pipeline. This enabled joint diagnosis of a 60-node-scale storage I/O bottleneck absent in 2-4-node tests, a production-scale phenomenon no single team could isolate alone. We perform three quantitative analyses yielding four findings. First, over 751 Prometheus metrics and 10 XID-identified GPU failures, no single metric is consistently dominant across failure types, motivating multi-signal detection. Second, 523 checkpoint events trace the save/load path from GPU VRAM to the NFS server: restart loading reaches 21.5% of maximum read bandwidth (700 GB/s) and save bursts 16.0% of maximum write bandwidth (250 GB/s), with NFS/RPC queueing and transport-layer backlog rising together. Third, across 224 sessions over 73 days, node exclusions concentrate so the top 3 of 63 nodes account for over 50%. Fourth, auto-retry chain analysis shows a 33.3% success rate over 12 chains (73 attempts), 2.7x the 12.5% manual rate, with a median retry interval of 11 minutes (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

15.
arXiv (CS.AI) 2026-06-16

Early Diagnosis of Wasted Computation in Multi-Agent LLM Systems via Failure-Aware Observability

arXiv:2606.01365v2 Announce Type: replace Abstract: Failure-aware observability diagnoses wasted computation in multi-agent LLM systems before final-answer evaluation can explain what went wrong. We propose a trace-based framework for a three-agent architecture – orchestrator, search agent, and execution agent – that converts structured events into online signals for loops, budget pressure, low information gain, and tool instability, then adds offline semantic grounding metrics and selective LLM-as-judge evaluation. On 165 GAIA validation traces under identical caps, 98 runs produce usable final answers and 67 fail or stop without one. Among warned failed runs, 58.1% of tokens are spent after the first warning on average, indicating substantial opportunity for intervention. A 10-task Level-2 pilot uses warnings to diversify search or require evidence, reducing post-warning token fraction from 0.638 in the baseline to 0.304. The results support a layered design: cheap online signals help the orchestrator redirect or halt redundant behavior, while deeper semantic checks identify whether completed answers are grounded enough to trust.

16.
arXiv (CS.AI) 2026-06-16

SkillsBench: Benchmarking How Well Agent Skills Work Across Diverse Tasks

arXiv:2602.12670v4 Announce Type: replace Abstract: Agent Skills are structured packages of procedural knowledge that augment large language model (LLM) agents at inference time. Despite rapid adoption, there is no standard way to measure whether they actually help. We present SkillsBench, a benchmark whose current inventory contains 87 tasks across 8 domains paired with curated Skills and deterministic verifiers. Our latest aggregate evaluation runs the 87-task benchmark under matched no-Skills and curated-Skills conditions for 18 model-harness configurations. Curated Skills raise the average pass rate from 33.9% to 50.5% (+16.6 percentage points; 25.5% normalized gain), with configuration-level gains ranging from +4.1 to +25.7 pp. Focused Skills with at most three modules outperform larger or exhaustive bundles, and smaller models with Skills can match larger models without them. SkillsBench establishes paired evaluation as the foundation for rigorous measurement of Skill efficacy on agentic, expertise-heavy work.

17.
arXiv (CS.AI) 2026-06-16

Toward Vibe Medicine: A Self-Evolving Multi-Agent Framework for Clinical Decision Support

arXiv:2606.15504v1 Announce Type: new Abstract: In recent years, the advances of large language models and autonomous agents have revolutionized the healthcare field, facilitating diagnosis and improving treatment results. However, most existing AI systems rely on pre-trained knowledge and predefined pipelines, which struggle to learn dynamically from the interactive chat session history that contains patient outcomes and past failures. To address this limitation, we propose VIBEMed, a multi-agent framework with a built-in self-evolution mechanism and architecture-level safety sandbox for robust clinical decision support. The system integrates three specialized agents, including a Clinical Diagnostic Agent (CDA) for hypothesis generation, a Therapeutic Execution Agent (TEA) for treatment planning, and a Clinical Evolution Manager Agent (CEMA) that distills longitudinal clinical feedback into reusable knowledge, transforming multimodal patient information into personalized medical decisions. Through self-evolution mechanism, the framework enables iterative updates across memory, model behavior, and decision strategies, allowing the system to improve over time. Experimental results show that VIBEMed demonstrates superior performance through its evolving mechanism in complex clinical cases, particularly in tasks that require integrated decision-making and longitudinal planning. The framework also supports reliable end-to-end decisions in challenging scenarios such as oncology treatment planning, highlighting its feasibility in real-world clinical contexts. Overall, VIBEMed provides a practical path beyond static AI systems toward adaptive, experience-driven clinical decision support, demonstrating the value of combining multi-agent collaboration with continuous evolution for advancing precision medicine.

18.
arXiv (CS.CL) 2026-06-16

Think-at-Hard: Selective Latent Iterations to Improve Reasoning Language Models

Improving the reasoning abilities of Large Language Models (LLMs), especially under parameter constraints, is crucial for real-world applications. Looped transformers address this by performing multiple latent iterations to refine each token beyond a single forward pass. However, we identify a latent overthinking phenomenon: most token predictions are already correct after the first pass, but are sometimes revised into errors in later iterations. We ask whether selectively skipping latent iterations can improve accuracy, and reveal significant potential with an oracle iteration policy that boosts performance by up to 7.3%. Motivated by this, we propose Think-at-Hard (TaH), a looped transformer optimized for selective iteration. TaH employs a lightweight neural decider to trigger latent iteration, only at tokens likely to be incorrect after the standard forward pass. During latent iterations, depth-aware Low-Rank Adaptation (LoRA) modules shift the objective from general next-token prediction to focused hard-token refinement. A duo-causal attention mechanism extends attention from the token sequence dimension to an additional iteration depth dimension, enabling cross-iteration information flow with full sequential parallelism. Experiments on nine benchmarks show consistent gains across math, QA, and coding tasks. With identical parameter counts, TaH outperforms always-iterate baselines by 3.8-4.4% while skipping iterations on 93% of tokens, and exceeds single-iteration Qwen3 baselines by 3.0-3.8%. When allowing

19.
arXiv (CS.CL) 2026-06-16

EHRNote-ChatQA: A Benchmark for Evidence-Grounded Multi-Turn Clinical Question Answering over Longitudinal Discharge Summaries

Discharge summaries are crucial clinical documents containing the context of a patient's overall hospital stay, and are routinely reviewed by medical experts for patient readmission, ongoing care, and diagnostic decision-making. When reviewing them, medical experts often must iteratively synthesize information across multiple summaries while verifying the evidence supporting each answer. Although large language models (LLMs) are increasingly explored for clinical question answering, existing benchmarks do not sufficiently reflect this setting: they often evaluate exam-style medical knowledge or focus on single-turn question answering with limited evidence-grounding evaluation. We introduce EHRNote-ChatQA, the first benchmark for evidence-grounded multi-turn clinical question answering over patients' multiple discharge summaries. Built from de-identified MIMIC-IV discharge summaries, EHRNote-ChatQA contains 967 patient-level multi-turn samples spanning one to five notes and 16,072 medical-expert-verified QA pairs (8,036 content questions, each paired with an evidence-grounding question) across eight clinical categories. The benchmark is constructed through an expert-informed pipeline combining discharge-summary structuring schema, expert-curated multi-turn QA templates, and LLM-based generation, followed by review and revision of every single QA sample by 11 medical experts. Benchmarking 22 open- and closed-source LLMs reveals several challenges, including that LLMs struggle more with evidence grounding than content answering, multi-turn errors compound across turns, and single-turn clinical QA performance does not reliably transfer to this setting. These findings establish EHRNote-ChatQA as a rigorous and practical benchmark for evaluating clinical QA systems. The dataset will be made publicly available through PhysioNet credentialed access.

20.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

21.
arXiv (CS.CL) 2026-06-16

PhoneHarness: Harnessing Phone-Use Agents through Mixed GUI, CLI, and Tool Actions

Phone agents are increasingly expected to complete real mobile workflows rather than merely predict the next screen action. However, much of the current mobile-agent literature still evaluates agents primarily as GUI controllers that observe a screen, emit taps and swipes, and are scored by target app state. Real phone-use tasks are broader: they require deciding when to use app GUIs, device-side commands, or structured tools, while leaving evidence that the intended side effect actually occurred. We introduce PhoneHarness, a mixed-action benchmark and execution harness for studying phone-use agents on verifiable mobile workflows. PhoneHarness runs a device-side agent loop over GUI, CLI, and host-side tool actions, combining deterministic action routing with bounded GUI delegation and auditable execution traces. Its benchmark, PhoneHarness Bench, evaluates whether agents complete tasks with observable side effects, not only whether they produce plausible final answers. On the annotated evaluation split, PhoneHarness reaches a 75.0% pass rate, outperforming the strongest non-PhoneHarness settings by 12.9 percentage points. PhoneHarness and PhoneHarness Bench therefore play distinct but mutually dependent roles: the harness makes mixed phone workflows executable, while the benchmark measures whether agents can use that harness reliably and safely. Our findings suggest that reliable phone automation depends on action-surface routing and verifiable execution, not only visual GUI control.

22.
arXiv (CS.CV) 2026-06-16

GroupToM-Bench: Benchmarking Group Theory of Mind and Nonlinear Social Emergence in MLLMs

True general intelligence requires not only a model of the physical world but also a social world model: the capacity to infer how individual mental states interact and crystallize into group-level outcomes. Despite notable progress in individual-level Theory of Mind (ToM) reasoning, existing multimodal large language models fail at this broader task. Collective behavior emerges non-linearly from social tensions, conformity dynamics, and structural constraints, meaning it cannot be recovered by merely summing individual intentions. We present GroupToM-Bench, the first multimodal benchmark for group-level ToM, built around a causal chain spanning micro-level BDI states (belief, desire, intention), meso-level group tension and structural constraints, and macro-level outcome prediction and mechanistic attribution. To probe this full arc, we develop a seven-level cognitive audit framework. Experiments reveal a gap between current models and human baselines, highlighting a failure to process social structures and non-linear collective dynamics.

23.
arXiv (CS.CV) 2026-06-16

A biological vision inspired framework for machine perception of abutting grating illusory contours

Higher levels of machine intelligence demand alignment with human perception and cognition. Deep neural networks (DNN) dominated machine intelligence have demonstrated exceptional performance across various real-world tasks. Nevertheless, recent evidence suggests that DNNs fail to perceive illusory contours like the abutting grating, a discrepancy that misaligns with human perception patterns. Departing from previous works, we propose a novel deep network called illusory contour perception network (ICPNet) inspired by the circuits of the visual cortex. In ICPNet, a multi-scale feature projection (MFP) module is designed to extract multi-scale representations. To boost the interaction between feedforward and feedback features, a feature interaction attention module (FIAM) is introduced. Moreover, drawing inspiration from the shape bias observed in human perception, an edge detection task conducted via the edge fusion module (EFM) injects shape constraints that guide the network to concentrate on the foreground. We assess our method on the existing AG-MNIST test set and the AG-Fashion-MNIST test sets constructed by this work. Comprehensive experimental results reveal that ICPNet is significantly more sensitive to abutting grating illusory contours than state-of-the-art models, with notable improvements in top-1 accuracy across various subsets. This work is expected to make a step towards human-level intelligence for DNN-based models.

24.
arXiv (CS.CV) 2026-06-16

Power Battery Detection

Power batteries are essential components in electric vehicles, where internal structural defects can pose serious safety risks. We conduct a comprehensive study on a new task, power battery detection (PBD), which aims to localize the dense endpoints of cathode and anode plates from industrial X-ray images for quality inspection. Manual inspection is inefficient and error-prone, while traditional vision algorithms struggle with densely packed plates, low contrast, scale variation, and imaging artifacts. To address this issue and drive more attention into this meaningful task, we present PBD5K, the first large-scale benchmark for this task, consisting of 5,000 X-ray images from nine battery types with fine-grained annotations and eight types of real-world visual interference. To support scalable and consistent labeling, we develop an intelligent annotation pipeline that combines image filtering, model-assisted pre-labeling, cross-verification, and layered quality evaluation. We formulate PBD as a point-level segmentation problem and propose MDCNeXt, a model designed to extract and integrate multi-dimensional structure clues including point, line, and count information from the plate itself. To improve discrimination between plates and suppress visual interference, MDCNeXt incorporates two state space modules. The first is a prompt-filtered module that learns contrastive relationships guided by task-specific prompts. The second is a density-aware reordering module that refines segmentation in regions with high plate density. In addition, we propose a distance-adaptive mask generation strategy to provide robust supervision under varying spatial distributions of anode and cathode positions. The source code and datasets will be publicly available at \href{https://github.com/Xiaoqi-Zhao-DLUT/X-ray-PBD}{PBD5K}.

25.
arXiv (CS.CV) 2026-06-16

Region-Adaptive Sampling for Diffusion Transformers

Diffusion models (DMs) have become the leading choice for generative tasks across diverse domains. However, their reliance on multiple sequential forward passes significantly limits real-time performance. Previous acceleration methods have primarily focused on reducing the number of sampling steps or reusing intermediate results, failing to leverage variations across spatial regions within the image due to the constraints of convolutional U-Net structures. By harnessing the flexibility of Diffusion Transformers (DiTs) in handling variable number of tokens, we introduce RAS, a novel, training-free sampling strategy that dynamically assigns different sampling ratios to regions within an image based on the focus of the DiT model. Our key observation is that during each sampling step, the model concentrates on semantically meaningful regions, and these areas of focus exhibit strong continuity across consecutive steps. Leveraging this insight, RAS updates only the regions currently in focus, while other regions are updated using cached noise from the previous step. The model's focus is determined based on the output from the preceding step, capitalizing on the temporal consistency we observed. We evaluate RAS on Stable Diffusion 3 and Lumina-Next-T2I, achieving speedups up to 2.36x and 2.51x, respectively, with minimal degradation in generation quality. Additionally, a user study reveals that RAS delivers comparable qualities under human evaluation while achieving a 1.6x speedup. Our approach makes a significant step towards more efficient diffusion transformers, enhancing their potential for real-time applications.