中 EN
Sign In Register
×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Sign In Register
Authors: Yang Du ×
↻ Shuffle
01.
arXiv (quant-ph) 2026-06-19

Single-Step Phase-Engineered Pulse for Active Readout Cavity Reset in Superconducting Circuits

Authors:
Ren-Ze Zhao↗Ze-An Zhao↗Tian-Le Wang↗Peng Wang↗Sheng Zhang↗Xiao-Yan Yang↗Hai-Feng Zhang↗Zhi-Fei Li↗Yuan Wu↗Sheng-Ri Liu↗Peng Duan↗Guo-Ping Guo↗…

arXiv:2512.08393v2 Announce Type: replace Abstract: In a circuit QED architecture, we experimentally demonstrate a hardware-efficient and qubit-state-dependent Single-Step Phase-Engineered (SSPE) pulse scheme for actively depopulating a readout cavity. The protocol appends a reset segment with tailored amplitude and phase to a standard square readout pulse. Within the linear-response regime, the optimal reset amplitude scales proportionally with the readout amplitude, while the optimal reset phase remains invariant, significantly simplifying the experimental calibration procedure. Time-resolved measurements of the cavity photon number dynamics demonstrate that the SSPE scheme significantly outperforms the CLEAR protocol in terms of reset speed. Crucially, this approach enables arbitrarily fast, overshoot-free depletion of the cavity photon population, with the ultimate reset rate constrained by the finite analog bandwidth of the measurement chain. Furthermore, a comprehensive evaluation of the QND nature demonstrates that the SSPE scheme introduces no additional non-QND measurement errors. It exhibits non-QNDness comparable to both the free-decay and CLEAR protocols, with residual errors predominantly governed by state switching induced by qubit relaxation during the readout process. Thses results establish the SSPE scheme as a practical and scalable approach for achieving rapid and smooth cavity reset in superconducting quantum circuits.

Read & Discuss → View Source →
02.
arXiv (CS.CV) 2026-06-16

Position: The Systemic Lack of Agency in Visual Reasoning

Authors:
Yizhao Huang↗Haoyang Chen↗Shiqin Wang↗Pohsun Huang↗Jiayuan Li↗Haoyuan Du↗Yandong Shi↗Zheng Wang↗Zhixiang Wang↗

This paper argues that a systemic lack of Agency constrains the implicit reasoning capabilities of current Vision-Language Models (VLMs). Implicit reasoning refers to the ability to autonomously discover and utilize hidden visual evidence to bridge information gaps, rather than merely relying on explicitly specified targets. This capacity underlies human visual understanding and everyday reasoning. We argue that this limitation arises from a tendency to approach visual reasoning primarily as passive semantic retrieval, rather than as active, situated reasoning that depends on autonomous visual exploration. As a result, most existing benchmarks primarily assess Passive Capacity, leaving this aspect of reasoning largely unmeasured. To address this gap, we introduce the Visual Implicit Reasoning Diagnosing Benchmark (V-IRD), which targets this missing quadrant by requiring models to derive answers strictly through autonomous visual analysis. Our results show that, despite strong retrieval abilities, prominent VLMs struggle to utilize reference objects and to attend to visual evidence that requires self-directed inquiry. Simply put, strong semantic recognition does not equate to active visual exploration, revealing a critical gap in current VLMs. More information can be found at https://haoychen.github.io/Implicit-Reasoning/

Read & Discuss → View Source →
03.
arXiv (CS.CL) 2026-06-15

OdysSim: Building Foundation Models for Human Behavior Simulation

Authors:
Xuhui Zhou↗Weiwei Sun↗Weihua Du↗Jiarui Liu↗Haojia Sun↗Qianou Ma↗Tongshuang Wu↗Yiming Yang↗Maarten Sap↗

Large language models are increasingly deployed as human simulators for interactive evaluation and social simulation. Yet helpfulness-driven post-training pulls them toward a homogeneous, overly agreeable assistant register, creating a behavioral Sim2Real gap. We present OdysSim, the largest open systematic investigation of behavioral foundation models, i.e., models trained to simulate human behavior at scale. We propose SOUL, a taxonomy of five capability axes (CONV, SS, COG, ROLE, EVAL) that unifies 62 datasets and 23 benchmark tasks under one framework. Specifically, we curate the OdysSim corpus (21.4M interactions, 10B tokens, retrofitted with back-generated social contexts), construct the SOUL-Index benchmark, and develop an end-to-end training recipe combining midtraining, task-specific RL, and expert distillation. The resulting open 8B OSim model ranks first or tied-first on 8 of 23 tasks, outperforming any individual frontier model by this count, with the strongest gains on conversational and social tasks. Its outputs are also more human-like in length, formatting, and word choice, and it transfers zero-shot to out-of-distribution user simulation on $\tau$-bench, nearly matching real users on reaction alignment (93.2 vs. 93.5). We further show that LLM-as-judge RL induces reward-hacking patterns, and that our detectors can mitigate them during post-training. Together, our findings suggest that behavioral foundation models require rethinking the LLM training paradigm. We release all artifacts to support future research.

Read & Discuss → View Source →
04.
arXiv (CS.CV) 2026-06-16

Rotational Symmetry based Object Pose Estimation from Point Clouds in the Absence of Known 3D Models

Authors:
Weichen Dai↗Ruixun Yu↗Yangjie Tang↗Yifan Du↗Yiyang Zhang↗Donglei Sun↗Hua Zhang↗

Object pose estimation is crucial to many industrial applications, with one example being automated spray painting using a robot. However, confidentiality concerns often limit access to high-quality 3D models, posing a significant challenge for point-cloud-based pose estimation. In such scenarios, rotational symmetry, a readily accessible characteristic of many industrial objects, can provide valuable prior information to facilitate pose estimation.In this paper, we propose a method that leverages the rotational symmetry commonly found in industrial objects to address the challenge caused by the absence of 3D models. The object pose is jointly estimated with point cloud refinement through an iterative optimization process. This optimization relies on a rotational symmetry constraint loss. To construct this loss, each 3D point is rotated according to the currently estimated pose, and multiple correspondences are identified using nearest-neighbor search by exploiting the rotational symmetry property. These correspondences are then used to compute the rotational symmetry constraint loss, which iteratively refines both the pose and the point cloud.By explicitly incorporating rotational symmetry into the optimization process, the proposed method achieves robust pose estimation and generalizes well across diverse object types. The proposed method is evaluated on a dataset specifically created for point clouds without known 3D models, consisting of four categories of synthetic objects and one real wheel hub collected from a production line. Experimental results demonstrate that the proposed method achieves performance comparable to methods that rely on known 3D models.

Read & Discuss → View Source →
05.
arXiv (CS.LG) 2026-06-19

Influence-Guided Concolic Testing of Transformer Robustness

Authors:
Chih-Duo Hong↗Chih-Cheng Yang↗Yu Wang↗Fang Yu↗

arXiv:2509.23806v2 Announce Type: replace-cross Abstract: Concolic testing for neural networks alternates concrete execution with constraint solving to search for inputs that flip model decisions. We present a concolic tester for Transformer classifiers that uses SHAP estimates to rank pending path predicates by their impact on the current prediction. To support self-attention with multiple heads in execution backed by SMT solving, we implement attention semantics in pure Python that are compatible with the solver and make the softmax boundary explicit by concretizing exponentiation arguments. We evaluate our method on CIFAR-10 across three compact Transformer classifiers, ResNet18, and VGG16 under a one-pixel budget and a 900s horizon. Across the 500 model–input pairs in this matched comparison, our method achieves 60% success, compared with 15% for a differential evolution baseline that treats the model as a black box. In the primary two-layer Transformer branch-ordering study, SHAP-based predicate prioritization raises success from 56% to 60% and reduces median attack time by 51%. These results show that influence-guided path exploration can make concolic testing a practical way to find adversarial examples in Transformer models.

Read & Discuss → View Source →
06.
arXiv (CS.AI) 2026-06-18

UPLOTS: A Unified Pretrained Language Model for Constrained Time-series Generation

Authors:
Du Yin↗Hao Xue↗Jinliang Deng↗Yang Yang↗Shuang Ao↗Arian Prabowo↗Flora Salim↗

arXiv:2606.10466v2 Announce Type: replace-cross Abstract: In time-series generation, existing approaches typically handcraft ortrain a separate model for each dataset, which hinders their scalability and fails to leverage shared temporal structures across domains. To address this fragmentation, we propose UPLOTS, a Unified, Prompt-guided Language model framework fOr constrained Time-Series Generation across diverse domains. Instead of building task-specific models, UPLOTS leverages a single pre-trained transformer backbone guided by learned constraint prompts, enabling on-demand generation with precise pattern control. One key innovation is our dynamic multi-dataset loss re-weighting and prompt-to-pattern mapping, which allows UPLOTS to internalize diverse temporal structures during training and conditionally generate them at inference. We evaluate UPLOTS on four real-world benchmarks and multiple constraint settings, including peak-period, calendar, load-level, and volatility patterns. Additional held-out constraint-combination and downstream forecasting experiments further demonstrate that UPLOTS generalizes beyond the original peak-pattern setting and improves data augmentation under scarce real-data regimes. Our code and baselines are available at anonymous github repo: https://anonymous.4open.science/r/UPLOTS-6C36.

Read & Discuss → View Source →
07.
arXiv (CS.LG) 2026-06-17

Evaluating Uplift Modeling under Structural Biases: Insights into Metric Stability and Model Robustness

Authors:
Yuxuan Yang↗Dugang Liu↗Yiyan Huang↗

arXiv:2603.20775v2 Announce Type: replace Abstract: In personalized marketing, uplift models estimate the incremental effect of an intervention by modeling how customer behavior would change under alternative treatments using counterfactual analysis. However, real-world marketing data often exhibit various biases, such as selection bias, spillover effects, measurement error, and unobserved confounding. These biases can adversely affect both the accuracy of uplift estimation and the validity of evaluation metrics. Despite the importance of bias-aware assessment, there remains a lack of systematic studies evaluating how different models and metrics perform under such biased conditions. To bridge this gap, we design a systematic benchmarking framework. Unlike standard predictive tasks, real-world uplift datasets inherently lack counterfactual ground truth. This limitation renders the direct validation of evaluation metrics infeasible and prevents the precise quantification of biases. Therefore, a semi-synthetic approach serves as a critical enabler for systematic benchmarking. This approach effectively bridges the gap by retaining real-world feature dependencies while providing the ground truth needed to isolate structural biases. Our investigations reveal that (i) uplift targeting and prediction can manifest as distinct objectives, where proficiency in one does not ensure efficacy in the other; (ii) while many models exhibit inconsistent performance under diverse biases, TARNet shows notable robustness, providing insights for subsequent model design; (iii) the stability of evaluation metrics is linked to their mathematical alignment with the ATE, suggesting that ATE-approximating metrics yield more consistent model rankings under structural data imperfections. These findings suggest the need for more robust uplift models and evaluation metrics under real-world data imperfections.

Read & Discuss → View Source →
08.
arXiv (CS.CL) 2026-06-12

HyperTool: Beyond Step-Wise Tool Calls for Tool-Augmented Agents

Authors:
Yaxin Du↗Yifan Zhou↗Yujie Ge↗Jiajun Wang↗Xianghe Pang↗Shuo Tang↗Tuney Zheng↗Bryan Dai↗Jian Yang↗Siheng Chen↗

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

Read & Discuss → View Source →
09.
arXiv (CS.CV) 2026-06-12

High-Fidelity Two-Step Image Generation via Teacher-Aligned End-to-End Distillation

Authors:
Dongyang Liu↗Ruoyi Du↗David Liu↗Dengyang Jiang↗Liangchen Li↗Qilong Wu↗Zhen Li↗Steven C. H. Hoi↗Hongsheng Li↗Peng Gao↗

Few-step diffusion distillation has become increasingly mature for 4-8-step generation, yet pushing further to 2 steps remains challenging. In this work, we introduce Z-Image Turbo++, a high-quality 2-step image generation model distilled from the 8-step Z-Image Turbo teacher. Our method addresses the central bottlenecks of increased task difficulty and limited model capacity in 2-step generation through three simple but effective design choices tailored to this regime. First, we propose Distribution-Aligned Adversarial Learning, which uses teacher-generated images rather than external real images as real samples for GAN training, providing a more attainable and informative adversarial target. Second, we adopt Step-Decoupled Parameterization, assigning independent model parameters to the two denoising steps to better match their distinct capacity demands. Third, we perform End-to-End Training with Iterative Regularization, allowing the first step to receive gradients from final image quality while preserving a meaningful intermediate generation through an explicit step-1 loss. Together, these designs substantially narrow the quality gap between 2-step and 8-step generation in both qualitative and quantitative evaluations, highlighting the potential of carefully tailored distillation strategies for improving the quality-efficiency trade-off in few-step generation.

Read & Discuss → View Source →
10.
arXiv (CS.CV) 2026-06-16

JoyAI-VL-Interaction: Real-Time Vision-Language Interaction Intelligence

Authors:
Dingyu Yao↗Junhao Zhou↗Chenxu Yang↗Chuanyu Qin↗Haowen Hou↗Zheming Liang↗Congcong Wang↗Yuhang Cao↗Shenglong Ye↗Shuai Xie↗Shuhuan Gu↗Haoyang Huang↗…

Many moments in the real world do not wait for a user to ask. A fire starts on a security monitor, an expression flickers across a video call, or a product a viewer wants flashes by in a livestream. Yet today's large models remain mostly turn-based by design: they answer only when addressed, and even video-call apps that appear interactive still operate as question-answer systems, reacting only when polled or prompted. We argue for a different paradigm: a model that is present in the world like a person. It continuously watches what is happening now, decides on its own whether to speak or stay silent, interacts in real time, and delegates to a background model when the problem is hard. To advance interaction models and their adoption across domains, we make two fully open-sourced contributions. First, we release JoyAI-VL-Interaction, an 8B-scale, vision-first VL-interaction model. The model makes the response decision internally, choosing each second to stay silent, respond, or delegate to a background model, and it excels at vision-triggered responsiveness and time awareness. We pair it with a transferable training recipe, from which capabilities we never trained for emerge, such as guiding a shopper through changing app screens or improvising a lecture from a slide deck. Second, we release a complete, deployable system built around that model. The system streams any ongoing video into the model, making it genuinely present in the world. All other components are pluggable, including ASR/TTS modules, memory, visualization UI, and a background brain that can connect to any API or agent. Across six real-world scenarios, human raters prefer JoyAI-VL-Interaction over the in-app video-call assistants of Doubao and Gemini by a wide margin. To our knowledge, this is the first open, vision-driven interaction model released together with its training recipe, data, and complete deployable system.

Read & Discuss → View Source →
11.
arXiv (CS.AI) 2026-06-17

OmniRetarget: Interaction-Preserving Data Generation for Humanoid Whole-Body Loco-Manipulation and Scene Interaction

Authors:
Lujie Yang↗Xiaoyu Huang↗Zhen Wu↗Angjoo Kanazawa↗Pieter Abbeel↗Carmelo Sferrazza↗C. Karen Liu↗Rocky Duan↗Guanya Shi↗

arXiv:2509.26633v3 Announce Type: replace-cross Abstract: A dominant paradigm for teaching humanoid robots complex skills is to retarget human motions as kinematic references to train reinforcement learning (RL) policies. However, existing retargeting pipelines often struggle with the significant embodiment gap between humans and robots, producing physically implausible artifacts like foot-skating and penetration. More importantly, common retargeting methods neglect the rich human-object and human-environment interactions essential for expressive locomotion and loco-manipulation. To address this, we introduce OmniRetarget, an interaction-preserving data generation engine based on an interaction mesh that explicitly models and preserves the crucial spatial and contact relationships between an agent, the terrain, and manipulated objects. By minimizing the Laplacian deformation between the human and robot meshes while enforcing kinematic constraints, OmniRetarget generates kinematically feasible trajectories. Moreover, preserving task-relevant interactions enables efficient data augmentation, from a single demonstration to different robot embodiments, terrains, and object configurations. We comprehensively evaluate OmniRetarget by retargeting motions from OMOMO, LAFAN1, and our in-house MoCap datasets, generating over 8-hour trajectories that achieve better kinematic constraint satisfaction and contact preservation than widely used baselines. Such high-quality data enables proprioceptive RL policies to successfully execute long-horizon (up to 30 seconds) parkour and loco-manipulation skills on a Unitree G1 humanoid, trained with only 5 reward terms and simple domain randomization shared by all tasks, without any learning curriculum.

Read & Discuss → View Source →
12.
arXiv (CS.AI) 2026-06-17

TuneAhead: Predicting Fine-tuning Performance Before Full Training Begins

Authors:
Yuxiang Luo↗Haonan Long↗Chen Wang↗Qiqi Duan↗Xiaotian Lin↗Yanwei Xu↗Yuyu Luo↗Weikai Yang↗Nan Tang↗

arXiv:2606.17660v1 Announce Type: cross Abstract: Fine-tuning large language models (LLMs) is compute-intensive and error-prone: model performance depends sensitively on data quality and hyperparameter choices, and naïve runs can even degrade model performance. This raises a practical question:can we predict fine-tuning performance before committing to a full training run? We present TUNEAHEAD, a lightweight framework for pre-hoc prediction of fine-tuning performance. TUNEAHEAD encodes each candidate run as a meta-feature vector that combines static dataset descriptors with dynamic probe features from a short standardized probe. A predictor maps these features to performance estimates, while SHAP-based attributions provide interpretable diagnostics that reveal which specific features drive the prediction. Across 1,300+ fine-tuning runs on Qwen2.5-7B-Instruct, TUNEAHEAD consistently outperforms strong baselines such as Early-Stop Extrapolation and ProxyLM. On a held-out test set of 370 runs, TUNEAHEAD achieves an RMSE of 1.47 percentage points and places 95.1% of predictions within +3/-3 percentage points of the true score. These accurate continuous predictions support practical go/no-go screening policies that can reduce unnecessary full fine-tuning while retaining most promising runs.

Read & Discuss → View Source →
13.
arXiv (CS.CV) 2026-06-18

Moebius: 0.2B Lightweight Image Inpainting Framework with 10B-Level Performance

Authors:
Kangsheng Duan↗Ziyang Xu↗Wenyu Liu↗Xiaohu Ruan↗Xiaoxin Chen↗Xinggang Wang↗

While 10B-level industrial foundation models have pushed the boundaries of image inpainting, their prohibitive computational costs severely hinder practical deployment. Constructing a highly optimized task-specific specialist offers a promising solution; however, extreme structural compression inevitably triggers a severe representation bottleneck. To conquer this, we propose Moebius, a highly efficient lightweight inpainting framework. We systematically reconstruct the diffusion backbone by introducing the Local-$\lambda$ Mix Interaction ($L\lambda MI$) block. Comprising Local-$\lambda$ and Interactive-$\lambda$ modules, it elegantly summarizes spatial contexts and global semantic priors into fixed-size linear matrices, preserving complex latent interactions while drastically shedding parameters. Furthermore, to unlock the full representational capacity of this highly compact architecture, we synergistically pair it with an adaptive multi-granularity distillation strategy. Operating strictly within the latent space to avoid expensive pixel-space decoding, this strategy dynamically balances multiple gradient-based losses to achieve high-fidelity alignment. Extensive experiments across natural and portrait benchmarks demonstrate that this optimal synergy enables Moebius to rival or even surpass the generation quality of the 10B-level industrial generalist FLUX.1-Fill-Dev. Remarkably, Moebius achieves this using less than 2\% of the parameters (0.22B vs. 11.9B) while delivering a $>15\times$ acceleration in total inference time, setting a new efficiency standard for high-fidelity inpainting. Project page at https://hustvl.github.io/Moebius.

Read & Discuss → View Source →
14.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

Authors:
NVIDIA↗Aditi↗Niket Agarwal↗Arslan Ali↗Jon Allen↗Martin Antolini↗Adeline Aubame↗Alisson Azzolini↗Junjie Bai↗Maciej Bala↗Yogesh Balaji↗Josh Bapst↗…

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

Read & Discuss → View Source →
15.
arXiv (CS.LG) 2026-06-11

Machine-learning clustering of close-in exoplanet populations: links to pebble accretion

Authors:
Yi Duann↗Anders Johansen↗Haiyang S. Wang↗H. Jens Hoeijmakers↗

arXiv:2606.11737v1 Announce Type: cross Abstract: Close-in exoplanets exhibit a wide range of orbital architectures and physical properties shaped by both formation conditions and migration processes. Although population-synthesis models predict distinct planetary populations, establishing a quantitative connection between observed exoplanets and synthetic populations remains challenging. We investigate the intrinsic organisation of close-in exoplanets using physically motivated dynamical parameters and connect the resulting populations to pebble-accretion formation pathways. A two-stage Gaussian mixture model (GMM) is applied to an observed sample of close-in exoplanets, performing unsupervised probabilistic clustering in a feature space dominated by dynamical descriptors of planet-star interactions. The resulting clusters are mapped onto a pebble-accretion synthetic population within a statistically motivated three-dimensional parameter space. Formation-related quantities, including gas availability, gas fraction, and ice-rock mass ratio, are then used to interpret the mapped populations. We identify statistically supported sub-populations without imposing predefined classification boundaries, including very-massive gas giants, hot giants, warm-Jupiter-dominated systems, and lower-mass giants. The mapped synthetic populations reveal systematic differences in formation timing, gas accretion, and solid growth histories. In particular, very-massive gas giants are preferentially associated with earlier formation epochs than hot-giant and warm-Jupiter-dominated populations. These results demonstrate that physically motivated machine-learning approaches can provide a statistically robust framework for linking observed exoplanet populations to theoretical planet formation pathways.

Read & Discuss → View Source →
16.
arXiv (CS.CV) 2026-06-16

LUCID: Learned Undersampling-Adaptive Consistency-Guided Inference with Deterministic Flow Matching for Sparse-View CT Reconstruction

Authors:
Jigang Duan↗Jiayi Wang↗Heran Wang↗Ping Yang↗Genwei Ma↗Xing Zhao↗

Sparse-view CT reduces radiation dose and scanning time by acquiring fewer projection views, but angular undersampling makes reconstruction severely ill-posed, causing streak artifacts, structural blurring, and loss of fine details. Existing supervised methods are often tied to specific sampling settings, whereas generative methods may introduce anatomically inconsistent hallucination-like structures under severe undersampling. We propose Lucid, a sparsity-adaptive, consistency-guided reconstruction framework based on a Flow Matching generative prior for sparse-view CT. Lucid is trained only on high-quality CT images to learn a continuous transport between a Gaussian distribution and the high-quality CT image distribution, independent of view sampling. During inference, the sampling sparsity level is explicitly incorporated to adapt the generative trajectory of a single pretrained model. Specifically, Lucid constructs a degradation-matched initial state by sparsity-weighted fusion of the sparse-view FBP image and Gaussian noise, performs sparsity-modulated Flow Matching updates, and applies projection-domain data-consistency correction after each prior update. Experiments under multiple sparse-view settings show that Lucid achieves stable reconstruction performance across different sampling densities, improves image quality and structural fidelity, and reduces the risk of hallucination-like structures in generative sparse-view CT reconstruction.

Read & Discuss → View Source →
17.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

Authors:
Wanghan Xu↗Shuo Li↗Tianlin Ye↗Qinglong Cao↗Yixin Chen↗Hengjian Gao↗Yiheng Wang↗Qi Li↗Kun Li↗Sheng Xu↗Shengdu Chai↗Fangchen Yu↗…

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

Read & Discuss → View Source →
18.
arXiv (CS.CL) 2026-06-19

Token-Operations-Oriented Inference Optimization Techniques for Large Models

Authors:
Shiguo Lian↗Kai Wang↗Zhaoxiang Liu↗Wen Liu↗Minjie Hua↗Yutong Liu↗Jiangze Yan↗Xin Wang↗Cong Wang↗Yilin Zhang↗Yi Shen↗Jieyun Huang↗…

Large model inference optimization serves as a key foundation for supporting the scalable, low-cost, and highly stable operation of large model services. Centered on token-oriented inference optimization technology, this paper proposes for the first time a four-layer technical architecture consisting of Multi-model Fusion, Model Optimization, Compute-Model Fusion, and Compute-Network-Model Fusion. It systematically reviews the key technologies and current industry status across these four levels and analyzes the application value of related technologies in real-world business scenarios. This paper provides a practical technical path for reducing token production costs, improving token service efficiency, ensuring the stability of token supply, and driving the transition of large model services from being merely callable to being operable.

Read & Discuss → View Source →
19.
arXiv (CS.CV) 2026-06-15

Interpretable Alzheimer's Diagnosis via Multimodal Fusion of Regional Brain Experts

Authors:
Farica Zhuang↗Shu Yang↗Dinara Aliyeva↗Zixuan Wen↗Duy Duong-Tran↗Christos Davatzikos↗Tianlong Chen↗Song Wang↗Li Shen↗

Accurate and early diagnosis of Alzheimer's disease (AD) is critical for effective intervention and requires integrating complementary information from multimodal neuroimaging data. However, conventional fusion approaches often rely on simple concatenation of features, which cannot adaptively balance the contributions of biomarkers such as amyloid PET and MRI across brain regions. In this work, we propose MREF-AD, a Multimodal Regional Expert Fusion model for AD diagnosis. It is a Mixture-of-Experts (MoE) framework that models mesoscopic brain regions within each modality as independent experts and employs a gating network to learn subject-specific fusion weights. Utilizing tabular neuroimaging and demographic information from the Alzheimer's Disease Neuroimaging Initiative (ADNI), MREF-AD achieves competitive performance over strong classic and deep baselines while providing interpretable, modality- and region-level insight into how structural and molecular imaging jointly contribute to AD diagnosis. The source code is available at https://github.com/PennShenLab/mref-ad.

Read & Discuss → View Source →
20.
arXiv (CS.AI) 2026-06-16

MemPO: Self-Memory Policy Optimization for Long-Horizon Agents

Authors:
Ruoran Li↗Xinghua Zhang↗Haiyang Yu↗Shitong Duan↗Xiang Li↗Wenxin Xiang↗Chonghua Liao↗Xudong Guo↗Yongbin Li↗Jinli Suo↗

arXiv:2603.00680v4 Announce Type: replace Abstract: Long-horizon agents face the challenge of growing context size during interaction with environment, which degrades the performance and stability. Existing methods typically introduce the external memory module and look up the relevant information from the stored memory, which prevents the model itself from proactively managing its memory content and aligning with the agent's overarching task objectives. To address these limitations, we propose the self-memory policy optimization algorithm (MemPO), which enables the agent (policy model) to autonomously summarize and manage their memory during interaction with environment. By improving the credit assignment mechanism based on memory effectiveness, the policy model can selectively retain crucial information, significantly reducing token consumption while preserving task performance. Extensive experiments and analyses confirm that MemPO achieves absolute F1 score gains of 25.98 over the base model and 7.1 over the previous SOTA baseline, while reducing token usage by 67.58% and 73.12%. The code is released at https://github.com/TheNewBeeKing/MemPO.

Read & Discuss → View Source →
21.
arXiv (CS.CV) 2026-06-11

How Auxiliary Reasoning Unleashes GUI Grounding in VLMs

Authors:
Weiming Li↗Yan Shao↗Jing Yang↗Yujing Lu↗Ling Zhong↗Yuhan Wang↗Min Yu↗Tongxiao Ruan↗Manni Duan↗

Graphical user interface (GUI) grounding is a fundamental task for building GUI agents. However, general vision-language models (VLMs) struggle with this task due to a lack of specific optimization. We identify a key gap in this paper: while VLMs exhibit significant latent grounding potential, as demonstrated by their performance measured by Pointing Game, they underperform when tasked with outputting explicit coordinates. To address this discrepancy and bypass the high data and annotation costs of current fine-tuning approaches, we propose three zero-shot auxiliary reasoning methods. By providing explicit spatial cues such as axes, grids and labeled intersections as part of the input image, these methods enable VLMs to better articulate their implicit spatial understanding capabilities. We evaluate these methods on four GUI grounding benchmarks across seven open-source and proprietary VLMs. Experimental results show substantial gains from auxiliary reasoning. Mark-Grid Scaffold boosts Gemini-3.1-Pro from 11.72\% under direct inference to 95.20\% on ScreenSpot-v2, achieves state-of-the-art performance on ScreenSpot, and approaches the strongest fine-tuned methods on ScreenSpot-v2 and UI-I2E-Bench. Our code is available at https://github.com/liweim/AuxiliaryReasoning.

Read & Discuss → View Source →
22.
arXiv (CS.CL) 2026-06-15

MASLab: A Unified and Comprehensive Codebase for LLM-based Multi-Agent Systems

Authors:
Rui Ye↗Keduan Huang↗Qimin Wu↗Yuzhu Cai↗Tian Jin↗Xianghe Pang↗Xiangrui Liu↗Jiaqi Su↗Chen Qian↗Bohan Tang↗Kaiqu Liang↗Jiaao Chen↗…

LLM-based multi-agent systems (MAS) have demonstrated significant potential in enhancing single LLMs to address complex and diverse tasks in practical applications. Despite considerable advancements, the field lacks a unified codebase that consolidates existing methods, resulting in redundant re-implementation efforts, unfair comparisons, and high entry barriers for researchers. To address these challenges, we introduce MASLab, a unified, comprehensive, and research-friendly codebase for LLM-based MAS. (1) MASLab integrates over 20 established methods across multiple domains, each rigorously validated by comparing step-by-step outputs with its official implementation. (2) MASLab provides a unified environment with various benchmarks for fair comparisons among methods, ensuring consistent inputs and standardized evaluation protocols. (3) MASLab implements methods within a shared streamlined structure, lowering the barriers for understanding and extension. Building on MASLab, we conduct extensive experiments covering 10+ benchmarks and 8 models, offering researchers a clear and comprehensive view of the current landscape of MAS methods. MASLab will continue to evolve, tracking the latest developments in the field, and invite contributions from the broader open-source community.

Read & Discuss → View Source →
23.
arXiv (CS.CV) 2026-06-17

NTIRE 2024 Challenge on Image Super-Resolution (x4): Methods and Results

Authors:
Zheng Chen↗Zongwei Wu↗Eduard Zamfir↗Kai Zhang↗Yulun Zhang↗Radu Timofte↗Xiaokang Yang↗Hongyuan Yu↗Cheng Wan↗Yuxin Hong↗Zhijuan Huang↗Yajun Zou↗…

This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge is to obtain designs/solutions with the most advanced SR performance, with no constraints on computational resources (e.g., model size and FLOPs) or training data. The track of this challenge assesses performance with the PSNR metric on the DIV2K testing dataset. The competition attracted 199 registrants, with 20 teams submitting valid entries. This collective endeavour not only pushes the boundaries of performance in single-image SR but also offers a comprehensive overview of current trends in this field.

Read & Discuss → View Source →
24.
arXiv (CS.AI) 2026-06-12

ARROW: Augmented Replay for RObust World models

Authors:
Abdulaziz Alyahya↗Abdallah Al Siyabi↗Markus R. Ernst↗Luke Yang↗Levin Kuhlmann↗Gideon Kowadlo↗

arXiv:2603.11395v3 Announce Type: replace-cross Abstract: Continual reinforcement learning challenges agents to acquire new skills while retaining previously learned ones with the goal of improving performance in both past and future tasks. Most existing approaches rely on model-free methods with replay buffers to mitigate catastrophic forgetting; however, these solutions often face significant scalability challenges due to large memory demands. Drawing inspiration from neuroscience, where the brain replays experiences to a predictive World Model rather than directly to the policy, we present ARROW (Augmented Replay for RObust World models), a model-based continual RL algorithm that extends DreamerV3 with a memory-efficient, distribution-matching replay buffer. Unlike standard fixed-size FIFO buffers, ARROW maintains two complementary buffers: a short-term buffer for recent experiences and a long-term buffer that preserves task diversity through intelligent sampling. We evaluate ARROW on two challenging continual RL settings: Tasks without shared structure (Atari), and tasks with shared structure, where knowledge transfer is possible (Procgen CoinRun variants). Compared to model-free and model-based baselines with replay buffers of the same-size, ARROW demonstrates substantially less forgetting on tasks without shared structure, while maintaining comparable forward transfer. Our findings highlight the potential of model-based RL and bio-inspired approaches for continual reinforcement learning, warranting further research.

Read & Discuss → View Source →
25.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

Authors:
Zheng Chen↗Kai Liu↗Jue Gong↗Jingkai Wang↗Lei Sun↗Zongwei Wu↗Radu Timofte↗Yulun Zhang↗Xiangyu Kong↗Xiaoxuan Yu↗Hyunhee Park↗Suejin Han↗…

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

Read & Discuss → View Source →