×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Yan Gu ×
换一批
01.
arXiv (CS.AI) 2026-06-11

Using Explainability as a Training-Time Reliability Signal for Efficient ECG Classification

arXiv:2606.12252v1 Announce Type: cross Abstract: Training deep neural networks for clinical time-series analysis is computationally demanding, yet many healthcare settings lack the resources required for repeated model development and deployment. This challenge is particularly evident in electrocardiogram classification, where large datasets and long training schedules make efficiency practically important. Progressive Data Dropout reduces training cost by excluding samples from gradient updates once they are learned, but it relies on model confidence and may retain samples that are difficult due to noise or ambiguity rather than useful signal. In this work, we introduce ERTS, an explainability-based reliability training signal for efficient ECG classification. ERTS uses explanation quality during training to distinguish between informative and unreliable uncertainty. Building on progressive data selection, we compute Grad-CAM attention maps for candidate samples and derive a focus score that measures whether model predictions are supported by coherent and localised patterns. Samples with low focus are filtered out, while those with meaningful attention are prioritised for gradient updates. We evaluate ERTS across three ECG datasets and multiple backbone architectures, showing consistent improvements in macro-F1 alongside reduced effective training cost. These results suggest that explanation quality can serve as a practical signal for improving both efficiency and reliability in clinical time-series learning. Code will be released.

02.
arXiv (CS.CV) 2026-06-11

ReMoT: Reinforcement Learning with Motion Contrast Triplets

We present ReMoT, a unified training paradigm to systematically address the fundamental shortcomings of VLMs in spatio-temporal consistency – a critical failure point in navigation, robotics, and autonomous driving. ReMoT integrates two core components: (1) A rule-based automatic framework that generates ReMoT-16K, a large-scale (16.5K triplets) motion-contrast dataset derived from video meta-annotations, surpassing costly manual or model-based generation. (2) Group Relative Policy Optimization, which we empirically validate yields optimal performance and data efficiency for learning this contrastive reasoning, far exceeding standard Supervised Fine-Tuning. We also construct the first benchmark for fine-grained motion contrast triplets to measure a VLM's discrimination of subtle motion attributes (e.g., opposing directions). The resulting model achieves state-of-the-art performance on our new benchmark and multiple standard VLM benchmarks, culminating in a remarkable 25.1% performance leap on spatio-temporal reasoning tasks.

03.
arXiv (CS.CV) 2026-06-11

AerialClaw: An Open-Source Framework for LLM-Driven Autonomous Aerial Agents

Unmanned aerial vehicles (UAVs) are increasingly used in inspection, search and rescue, environmental monitoring, and emergency response. However, most UAV applications still rely on pre-defined command sequences or task-specific pipelines, where developers manually connect perception, planning, flight control, simulation, logging, and safety modules. This limits the flexibility, reproducibility, and extensibility of autonomous aerial systems. This paper presents AerialClaw, an open-source software framework that enables UAVs to operate as decision-making aerial agents rather than merely command-following platforms. Given a natural-language mission, AerialClaw allows an LLM-based agent to understand the task, maintain context, invoke executable aerial skills, observe perception and runtime feedback, and iteratively update its decisions in a closed loop. The framework adopts a modular brain-skill-runtime architecture, combining hard skills for atomic UAV operations, Markdown-based soft skills for reusable task strategies, document-driven agent state and capability boundaries, memory-driven reflection, safety-oriented runtime validation, and platform-agnostic execution adapters. AerialClaw supports lightweight mock execution, PX4 SITL with Gazebo, and AirSim-based simulation, together with a web console, pluggable model backends, example missions, simulation assets, and staged deployment scripts. By combining standardized aerial skills, document-driven agent state, memory, and closed-loop LLM decision-making, AerialClaw provides a reproducible and extensible open-source framework for building UAV systems that can interpret missions, make decisions, execute skills, and adapt their behavior from feedback.

04.
arXiv (quant-ph) 2026-06-16

REGRID-QAOA: A Resource-Efficient Graph-Reduced Hybrid QAOA Framework for Physics-Constrained Power System Islanding

arXiv:2606.15083v1 Announce Type: new Abstract: Quantum computing has rapidly emerged as a powerful paradigm for tackling computationally demanding problems. In particular, quantum optimization shows strong promise for hard combinatorial problems in power systems, where increasing distributed energy penetration heightens the need for intentional islanding to maintain grid reliability and resilience. However, power system islanding is an NP-hard combinatorial optimization problem that becomes computationally prohibitive for classical solvers as network size grows, motivating the use of quantum computing as a promising alternative pipeline. This study develops a resource-efficient hybrid QAOA islanding framework that brings physics-constrained power-system partitioning into the quantum optimization workflow. The framework combines coherency-informed graph reduction, physics-aware constraint modeling, and structured post-processing to efficiently convert shallow-circuit QAOA samples into high-quality feasible islanding decisions without deep circuits or large shot budgets. The proposed framework is validated on the standard IEEE benchmark systems (9-, 14-, 24-, 30-, 39-, and 57-bus), demonstrating that the hybrid workflow achieves Gurobi-optimal solution quality with a clear quantum resource advantage over vanilla QAOA, while the resulting islanding solutions satisfy all physical feasibility requirements after network separation. This study establishes QAOA-based islanding as a viable quantum approach for critical infrastructure, with structured post-processing as the key enabler of quantum resource efficiency.

05.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

06.
arXiv (quant-ph) 2026-06-17

SPICE-Q and Large-Scale Quantum Chip Production

arXiv:2606.17907v1 Announce Type: new Abstract: We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.

07.
arXiv (CS.AI) 2026-06-12

Benchmarking Counterfactual Prediction in Epidemic Time Series with Time-Varying Interventions

arXiv:2606.05692v2 Announce Type: replace-cross Abstract: Deep learning has enabled significant advances in time-series causal inference, yet progress remains constrained by the lack of realistic benchmarks with observable counterfactual outcomes. Existing datasets either rely on real-world observations without ground-truth counterfactuals or on simplified simulations that fail to capture complex causal dynamics. To address this gap, we develop a large-scale benchmark for counterfactual prediction in epidemic time series under dynamic interventions. Unlike existing benchmarks, it supports static and time-varying treatments, as well as both single-policy and multi-policy intervention settings, enabling evaluation of causal inference methods across a broad range of causal inference scenarios. Leveraging a calibrated agent-based model grounded in real-world demographic, mobility, epidemiological, and policy data, we generate realistic counterfactual trajectories across more than 150 U.S. counties. Using this benchmark, we evaluate widely used and state-of-the-art causal inference methods, revealing substantial performance differences and highlighting the challenges of realistic time-series causal reasoning.

08.
arXiv (CS.LG) 2026-06-19

Score Approximation for Diffusion Models on Arbitrary Low-Dimensional Structures

arXiv:2606.19894v1 Announce Type: new Abstract: The remarkable success of score-based diffusion models has spurred significant efforts to establish their theoretical foundations. However, existing complexity bounds for score approximation rely heavily on restrictive assumptions like Lipschitz continuous densities or smooth manifold supports, which are routinely violated by the singularities, sharp boundaries, and disjoint clusters inherent to real-world perceptual data. This work establishes a universal score approximation theorem that works for any distribution supported on any compact set of upper Minkowski dimension $d$. Using a novel discrete-mixture formulation, we prove that the score function can be approximated with a ReLU network whose complexity grows exponentially only with $d$, thus breaking the exponential curse of ambient dimensionality. Combined with existing theories on accurately solving the backward diffusion SDE for arbitrary compact distributions, our work shows that diffusion models readily adapt to irregular, non-smooth data structures, explaining their competence in real-world generative tasks.

09.
arXiv (CS.AI) 2026-06-17

Descriptor: Certus Caliber Classification Gunshot Dataset (C3GD)

arXiv:2606.18135v1 Announce Type: cross Abstract: In this work, we introduce the Certus Caliber Classification Gunshot Dataset (C3GD), a publicly accessible data set developed for the analysis of firearm muzzle blast sounds. The dataset aims to provide a wide variety of firearms, calibers, cartridges, microphones, and microphone locations with metadata detailed beyond what is currently otherwise available. It comprises more than 8000 field-collected data points from 28 firearms across 16 calibers. Because data collection in the field is costly, much of the existing research has been done using gunshot audio collected from the internet, which increases the risk of low-quality data and label noise. This dataset is primarily focused on caliber classification, but can also be used for gunshot detection, audio separation, and audio signal processing, providing a diversified and real-world reference. The dataset aims to provide enough diversity to be able to generalize to more real-world applications while also providing enough metadata for detailed academic analysis.

10.
arXiv (CS.AI) 2026-06-25

LLM Evolution as an Industry-Scale Ecosystem: A Lifecycle Perspective on Continual Learning

arXiv:2606.24901v1 Announce Type: cross Abstract: Continual learning capability is critical for Industrial LLMs, as deployed models must be continuously updated to meet evolving requirements and environments, rather than repeatedly retrained from scratch. However, most existing research focuses on improvements on static benchmarks, failing to capture real industrial needs. In this survey, we reformulate Industrial Continual Learning (ICL) for LLMs as a closed-loop update-and-release problem in a versioned ecosystem, where updates propagate hierarchically to industrial, application-specific models and LLM-powered applications, with capability inheritance and transfer across versions and model families. From this ecosystem perspective, we identify three core challenges: repeated adaptation erodes model plasticity, foundation-model upgrades break capability inheritance, and long-term sustainability is constrained by deployment requirements. We then organize the technical landscape of ICL around five lifecycle design principles: preserving plasticity headroom, treating upgrades as capability transfer, enabling trustworthy continual reinforcement learning, making training recipes self-optimizing, and building accountability as a base layer for long-term iteration. For each principle, we synthesize representative technical directions. Finally, we evaluate the maturity of each principle and its technical components via an evidence-based lens, identify key gaps hindering real-world deployment, and outline a practical ICL deployment blueprint and a pathway for feeding industrial realities back into academic research.

11.
arXiv (CS.CV) 2026-06-16

MotionVLA: Vision-Language-Action Model for Humanoid Motion

Generating realistic humanoid motion from scene images and text involves both low-frequency pose semantics and high-frequency physical dynamics. However, many existing methods tokenize motion with a single shared codebook, forcing heterogeneous motion signals into the same quantization space. Our frequency-domain analysis of human motion data reveals a clear mismatch between single-codebook quantization and motion statistics: five DCT coefficients capture 93% of joint-position energy but only 37% of joint-velocity energy, which can bias quantization toward pose statistics and under-represent high-frequency velocity components. A second challenge lies in adapting a standard autoregressive model to effectively model high-frequency physical signals in motion sequences. Therefore, we propose DSFT, a dual-stream frequency tokenizer that separates motion into Base and physical streams and compresses them independently with DCT truncation and BPE. Furthermore, we present MotionVLA, a Qwen3.5-based model that arranges Base and physical tokens in a unified sequence, where Phys tokens are predicted after Base tokens. Experiments on HumanML3D and MBench show that, despite using a lightweight 2B backbone, MotionVLA reduces the Diversity gap to real data by over 50% on HumanML3D and improves Motion-Condition Consistency by 3.8% on MBench, supporting frequency-aware dual-stream decoupling as an effective formulation for autoregressive motion generation. Code: https://github.com/AIGeeksGroup/MotionVLA. Website: https://aigeeksgroup.github.io/MotionVLA.

12.
arXiv (CS.AI) 2026-06-16

SkillsBench: Benchmarking How Well Agent Skills Work Across Diverse Tasks

arXiv:2602.12670v4 Announce Type: replace Abstract: Agent Skills are structured packages of procedural knowledge that augment large language model (LLM) agents at inference time. Despite rapid adoption, there is no standard way to measure whether they actually help. We present SkillsBench, a benchmark whose current inventory contains 87 tasks across 8 domains paired with curated Skills and deterministic verifiers. Our latest aggregate evaluation runs the 87-task benchmark under matched no-Skills and curated-Skills conditions for 18 model-harness configurations. Curated Skills raise the average pass rate from 33.9% to 50.5% (+16.6 percentage points; 25.5% normalized gain), with configuration-level gains ranging from +4.1 to +25.7 pp. Focused Skills with at most three modules outperform larger or exhaustive bundles, and smaller models with Skills can match larger models without them. SkillsBench establishes paired evaluation as the foundation for rigorous measurement of Skill efficacy on agentic, expertise-heavy work.

13.
arXiv (CS.AI) 2026-06-16

Few-shot Class-variable Incremental Audio Classification via Prototype Adaptation and Pseudo Class-variable Training

arXiv:2606.08898v2 Announce Type: replace-cross Abstract: In the task of few-shot class-incremental audio classification, the number of classes is assumed to always increase without considering the possibility of decrease. However, the number of classes generally increases or decreases in practice. In this paper, we investigate a problem of Few-shot Class-variable Incremental Audio Classification (FCIAC), in which the number of classes increases or decreases. We propose a FCIAC method using prototype adaptation and pseudo class-variable training. The model in our method consists of an encoder and a classifier. The classifier is initialized by a class-variable prototype adaptation network, whose structure dynamically changes with the change of classes. In addition, we design a pseudo class-variable training strategy to enhance the model's adaptability to changing classes. Experiments on three public datasets show that our method exceeds previous methods in average accuracy. The code is at: https://github.com/cgq2971-afk/FCIAC.

14.
arXiv (CS.CL) 2026-06-16

Learning When to Sample: Confidence-Aware Selective Sampling for Efficient Chain-of-Thought Reasoning

Large language models (LLMs) can achieve strong reasoning performance through chain-of-thought (CoT) reasoning, yet they often generate unnecessarily long reasoning paths that incur high inference cost. Self-consistency-based approaches push accuracy higher still, but they require sampling and aggregating multiple reasoning trajectories, leading to substantial computational overhead. In this paper, we introduce a confidence-aware selective sampling framework that, at inference time, analyzes a single reasoning trajectory to adaptively determine whether to rely on that trajectory alone or trigger multi-path sampling. The framework uses trajectory-level numeric features and sentence-level linguistic features extracted from reasoning states to guide selective multi-path reasoning. We train it on MedQA and evaluate it in-domain on MedQA and under calibration-only transfer on MathQA, MedMCQA, and MMLU, without further fine-tuning. Experimental results show that the proposed framework maintains comparable performance to full and efficient multi-path reasoning baselines, with accuracy changes of $-0.41 \pm 0.58$ and $-0.31 \pm 0.58$ percentage points, respectively, while reducing token usage by $71.7 \pm 5.0%$ and $36.6 \pm 9.1%$. These findings demonstrate that reasoning trajectories contain rich signals for uncertainty estimation, enabling a simple, transferable mechanism to balance accuracy and efficiency in LLM reasoning.

15.
arXiv (CS.AI) 2026-06-18

Externalizing Research Synthesis and Validation in AI Scientists through a Research Harness

arXiv:2606.18874v1 Announce Type: new Abstract: AI systems can increasingly automate scientific workflows, but the reasoning that links prior evidence, generated ideas, experiments and final claims often remains implicit inside model inference. Here we introduce Xcientist, a research harness that externalizes research synthesis and experimental validation into inspectable, contract-governed processes. Xcientist organizes literature evidence, idea states, implementation plans, ablation records and repair traces as persistent research artifacts, so that generated mechanisms can be grounded, executed, tested and revised without losing their evidential basis. We identify claim drift as a failure mode of automated research, where runnable artifacts no longer support the mechanism originally claimed. Across training-free memory systems, graph-structured traffic forecasting and multi-scale physics-informed neural networks, Xcientist preserves traceable trajectories from problem formulation to mechanism design, validation and bounded revision. These results suggest that AI scientists should be evaluated not only by their final artifacts, but by whether their synthesis and validation processes remain attributable, inspectable and scientifically accountable.

16.
arXiv (CS.CV) 2026-06-12

OmniDirector: General Multi-Shot Camera Cloning without Cross-Paired Data

Cloning camera motion from reference videos is an important task in video generation, as videos provide intuitive and precise control. Existing methods either directly use parametric representations that fail to handle multi-shot generation or synthesize cross-paired data, which suffer from data scarcity, resulting in poor performance in complicated camera motion cloning. To address these issues, we introduce a general camera motion representation that encodes cameras as grid motion videos. This camera grid represents the camera parameters visually and supports the integration of diverse trajectories for multi-shot video generation. Building upon this, we propose OmniDirector, a unified framework trained on a million-scale camera grid-video pairs that coordinates characters, actions, and cameras to provide director-level control for multimodal diffusion transformers. Furthermore, we design a novel hierarchical prompt expansion agent that harmoniously integrates different control signals by systematically describing camera motion and visual content through understanding signal relationships. Extensive experiments demonstrate the superior performance and outstanding controllability of our framework. Project page: https://ymlinfeng.github.io/OmniDirector.github.io/

17.
arXiv (CS.AI) 2026-06-11

Workflow-GYM: Towards Long-Horizon Evaluation of Computer-use Agentic tasks in Real-World Professional Fields

arXiv:2606.11042v2 Announce Type: replace Abstract: Recent years have witnessed the rapid evolution of AI agents toward handling increasingly complex, real-world tasks. However, existing benchmarks rarely evaluate whether agents can operate graphical user interfaces to complete long-horizon, high-value professional workflows across diverse domains. Current GUI benchmarks still predominantly focus on general-purpose software, relatively simple applications, and short-horizon tasks, leaving it largely unknown whether modern agents can follow user instructions to autonomously operate domain-specific professional software and accomplish economically valuable work in an end-to-end manner. To bridge this gap, we introduce Workflow-GYM, a benchmark for long-horizon GUI tasks centered on professional domains and specialized software environments. Through extensive experiments on state-of-the-art models, we find that even the strongest models achieve only slightly above 30% success rates, highlighting that professional long-horizon GUI workflows remain highly challenging for current GUI agents. Further analysis reveals that current agents struggle to maintain long-horizon workflow consistency, frequently exhibiting workflow stage omission, error propagation, objective drift, and insufficient understanding of professional software environments. Our findings provide important insights into the limitations of current agent systems and suggest key directions for the next generation of GUI-agent research.

18.
arXiv (CS.AI) 2026-06-12

Benchmarking AI Agents for Addressing Scientific Challenges Across Scales

arXiv:2606.12736v1 Announce Type: new Abstract: AI agents are increasingly being developed to accelerate scientific discovery, yet their practical capabilities in real research settings remain poorly understood. Existing benchmarks for AI agents rarely capture the complexity, heterogeneity, and extended reasoning required by scientific work, whereas benchmarks for scientific tasks often reduce research to static, direct problems and provide limited support for interactive evaluation. Here, we introduce SciAgentArena, a systematic benchmark for evaluating AI agents in real-world scientific research scenarios drawn from emerging needs across multiple domains. SciAgentArena comprises approximately 200 tasks with stepwise verification and an interactive, agent-agnostic environment for assessing diverse AI agents. Using this benchmark, we find that current agents can contribute effectively to well-specified data-analysis workflows, particularly when the task structure and evaluation criteria are clear. However, their performance remains uneven across scientific contexts: agents struggle to generate genuinely novel insights, sustain self-directed exploration, and formulate robust solutions for open-ended research questions. We further characterize common failure modes across agents and identify opportunities for improving their reliability, autonomy, and scientific reasoning. Together, SciAgentArena provides a practical framework for measuring progress in AI agents for science and for guiding the design of future agents capable of addressing complex scientific challenges. Full codes, tasks, and datasets can be accessed via this link: https://sciagentarena.github.io/.

19.
medRxiv (Medicine) 2026-06-22

Integration of lung tissue proteomics and genome-wide association data to identify lung cancer susceptibility proteins and potential drug targets

Background: Proteins directly impact disease development and act as drug targets. Therefore, we integrated genomic and lung tissue proteomics data to identify lung cancer susceptibility proteins, elucidating genetic mechanisms and candidate drug targets. Method: We profiled the proteome and genome in non-neoplastic lung tissue from 200 lung cancer patients. Using this data, we constructed genetic models to predict abundance across the proteome in lung tissue. We applied these models to genome-wide association study (GWAS) data from 55,174 lung cancer cases and 1,294,174 controls to evaluate their associations with the risk of lung cancer, overall and by major histological subtypes. Bayesian colocalization and Mendelian randomization (MR) analyses were used to prioritize putative causal proteins, which were cross-referenced with three main drug-protein databases to identify potential therapeutic targets. Results: We identified 29 proteins associated with lung cancer risk at a false discovery rate < 5%, including 25 for overall lung cancer, two (AQP3 and IL18) specifically for adenocarcinoma, and another two (HMGN2 and HLA-DMB) for squamous cell carcinoma. Of them, genes encoding 17 proteins reside at least 2Mb away from any known GWAS risk loci, including 14 for overall lung cancer (HYI, GPX1, GMPPB, DSP, HDDC2, MTCH2, SUOX, JMJD7, PDIA3, IL16, IQGAP1, SULT1A2, ARHGAP27, and TYMP) and three for subtypes (AQP3, IL18, and HMGN2). Among the 12 proteins located within the known risk loci, EPHX2, CLDN18, PSMD5, and CYP2S1 proteins showed an association independent of the proximal GWAS-identified lead variant. Colocalization and/or MR analysis suggested 11 potential causal proteins. Five of these candidate causal proteins (DSP, CLDN18, IQGAP1, IL18 and TYMP) are targeted by nine drugs already approved by the FDA or in phase III trials. Conclusion: Our study identified novel lung cancer susceptibility proteins and potential drug targets, offering valuable insights into lung cancer biology and future translational utilities.

20.
arXiv (CS.AI) 2026-06-25

Decoupling Reconnaissance and Exploitation: Measuring the Capability Boundaries of LLM-Based Web Penetration Testing

arXiv:2606.25332v1 Announce Type: cross Abstract: Large Language Models (LLMs) have shown promise for automated penetration testing, yet existing end-to-end black-box evaluations are highly susceptible to error cascading: failures in early reconnaissance can mask an agent's actual ability to exploit vulnerabilities. To more accurately characterize these capabilities, we propose a two-stage decoupled evaluation framework that separates exploit execution from reconnaissance. Using ground-truth injection and knowledge-driven ablation across 70 high-fidelity web vulnerability testbeds, our framework isolates exploitation performance from reconnaissance noise. We empirically evaluate five open-source penetration-testing agents, covering multiagent, monolithic, and graph-driven architectures, on a strictly aligned subset of 50 representative vulnerabilities. The results reveal a substantial capability gap. With accurate vulnerability context, agents achieve a functional success rate of up to 90.0%, whereas autonomous reconnaissance, measured by targeted vulnerability recall, plateaus at approximately 50.0%, primarily due to failures in parsing unstructured telemetry. Cross-architectural analysis further reveals distinct capability niches: multi-agent isolation is more effective for long-sequence interactions such as de-serialization, while monolithic and graph-driven designs perform better on short-chain injections and cross-session access-control vulnerabilities, respectively. This decoupled evaluation work provides a fine-grained benchmarking protocol and an empirical basis for designing next-generation automated offensive security agents.

21.
arXiv (CS.AI) 2026-06-25

Power-Flexible AI Data Centers: A New Paradigm for Grid-Responsive Compute

arXiv:2606.25098v1 Announce Type: cross Abstract: The rapid expansion of artificial intelligence (AI) infrastructure is driving unprecedented growth in electricity demand from data centers. Traditional power-system planning treats large computing facilities as inflexible peak loads, leading to costly infrastructure upgrades and long delays in grid interconnection. Recent work has shown that AI clusters can reduce electricity consumption during peak demand through software-based workload orchestration. This article explores how modern GPU-based AI data centers can operate as grid-interactive assets that respond dynamically to power system conditions. We describe an architecture integrating grid signals, workload scheduling, and power telemetry for fine-grained cluster power control. Experimental results from a real-world deployment on a 130 kW GPU cluster demonstrate multiple forms of flexibility, including rapid load reduction, sustained curtailment, and carbon-aware operation while preserving service levels for priority jobs. We further demonstrate performance-aware load shifting across geographically distributed clusters, enabling workloads to migrate toward regions with lower grid stress. Together, these capabilities transform AI infrastructure from static electricity consumers into flexible resources that support grid reliability, accelerate interconnection, and improve computing sustainability.

22.
arXiv (CS.CL) 2026-06-24

AVOC: Enhancing Hour-Level Audio-Video Understanding in Omni-Modal LLMs via Retrieval-Inspired Token Compression

Multimodal Large Language Models have achieved remarkable progress in short-form audio-video understanding, yet long-form audio-video comprehension remains challenged by limited context windows and severe information redundancy. To address these bottlenecks, we propose AVOC, a framework for long-form audio-video understanding in Omni-modal Large Language Models. AVOC introduces a learnable token compression module between the modality encoders and the LLM backbone. We reframe multimodal token compression as a top-$K$ retrieval problem: given a fixed context budget, the module must retrieve a compact subset of tokens that best supports answering the user query. We draw inspiration from three classical Information Retrieval criteria for selecting informative units from a large candidate pool: relevance, importance, and diversity. AVOC instantiates each criterion as a tailored mechanism for audio-video understanding, and integrates them into a unified retrieval-style compression pipeline. Experiments show that AVOC achieves state-of-the-art performance on long-form audio-video benchmarks, surpassing the second-best model by 4.9 and 5.5 points in average accuracy on OmniVideoBench and LVOmniBench, respectively. Moreover, AVOC maintains robust performance on Audio-Video Needle-in-a-Haystack task at durations up to one hour.

23.
arXiv (quant-ph) 2026-06-11

A saturation-absorption rubidium magnetometer with multilevel optical Bloch-equation modeling for intermediate-to-high fields

arXiv:2601.09115v2 Announce Type: replace Abstract: We present SASHMAG (Saturated Absorption Spectroscopy High-field MAGnetometer), an atomic sensor designed for precision magnetic-field measurements in the intermediate-to-high field regime ($>0.2\,T$) using Rubidium-87 ($^{87}Rb$). The sensor operates in the hyperfine Paschen-Back regime, where the hyperfine and Zeeman interactions decouple, and utilizes counter-propagating pump-probe configuration in Faraday geometry to resolve isolated, Doppler-free Zeeman transitions. To interpret the resulting spectra in this strongly field-dependent regime, we developed a comprehensive multilevel optical Bloch-equation model solved explicitly in the uncoupled $\ket{m_I, m_J}$ basis, capturing state mixing and nonlinear saturation dynamics. This model reproduces measured spectra at sub-Doppler resolution and is consistent with analytical expectations for power broadening and thermal Doppler scaling. Magnetic field estimation is performed using a physics-constrained optimization routine that infers the magnetic field by minimizing the residual between experimentally extracted line centers and calculated transition frequencies from the field-dependent Hamiltonian. We demonstrate magnetic field retrieval from $0.2\,T$ to $0.4\,T$ with a precision of $\pm 0.0017 \,T$). Furthermore, the validated simulation establishes a foundation for generating synthetic training datasets, paving the way for autonomous, Machine Learning-enhanced magnetometry in applications ranging from MRI to fusion reactors.

24.
arXiv (CS.AI) 2026-06-25

Tracking Large-scale Shared Bikes with Inertial Motion Learning in GNSS Blocked Environments

arXiv:2605.07412v2 Announce Type: replace-cross Abstract: Although Global Navigation Satellite Systems (GNSS) provide a general solution for bike tracking outdoors, there still exist complex riding environments where only inertial navigation systems work, such as urban canyons. Despite decades of research, localization using only low-cost inertial sensors still faces challenges such as cumulative drifts and poor robustness caused by filtering methods. Furthermore, sensors such as visual and LiDAR could provide reliable measurements, but they are not suitable for large-scale deployment. In this paper, we propose an inertial tracking framework that integrates bicycle mechanical constraints with a mixture-of-experts model. Specifically, we leverage multiple expert modules to capture shared representations and weight them through the gating mechanism, thus improving multi-task learning performance and enabling uncertainty-aware trajectory estimation. Furthermore, based on the mechanical transmission between the pedal and the rear wheel of a bike, we explore the intrinsic relationship between the rider's periodic pedalling behaviors and acceleration variations, and convert such patterns into bike's wheel speed for dynamic calibration. Experiments with real-world riding data from shared bikes of the DiDi ride-hailing platform demonstrate that our system improves the accuracy of baselines by at least 12%, with wheel speed errors below 0.5 m/s at 95-percentile.

25.
arXiv (CS.CV) 2026-06-17

Gaussian Light Field Splatting: A Physical Prior-Driven Vision Transformer for Unsupervised Low-Light Image Enhancement

Existing unsupervised low-light image enhancement methods often encounter local exposure imbalance and color distortion under complex non-uniform illumination. In addition, most Vision Transformers lack an explicit mechanism for modeling the physical priors of illumination degradation. To address these limitations, we propose GLFS, a Gaussian light field splatting-based Vision Transformer that integrates continuous physical illumination modeling from Gaussian splatting into the Transformer architecture. In GLFS, scene illumination is represented by a superposition of anisotropic Gaussian basis functions. Physics-guided biases are introduced into self-attention to adaptively infer a spatial gain field, enabling accurate and uniform restoration under complex illumination. To reduce color bias and structural degradation during enhancement, a color-vector angular loss and a luminance-edge loss are further developed. These losses enforce hue consistency and improve the structural fidelity of local details. Extensive ablation studies and quantitative evaluations show that GLFS provides clear advantages in illumination correction and detail preservation. It achieves state-of-the-art performance and offers a new representation paradigm for low-light image enhancement.