×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Wei Ji ×
换一批
01.
arXiv (CS.AI) 2026-06-12

When Smaller Wins: Dual-Stage Distillation and Pareto-Guided Compression of Liquid Neural Networks for Edge Battery Prognostics

arXiv:2601.06227v3 Announce Type: replace-cross Abstract: Battery management systems increasingly require accurate battery health prognostics under strict on-device constraints. This paper presents DLNet, a practical framework with dual-stage distillation of liquid neural networks that turns a high-capacity model into compact and edge-deployable models for battery health prediction. DLNet first applies Euler discretization to reformulate liquid dynamics for embedded compatibility. It then performs dual-stage knowledge distillation to transfer the teacher model's temporal behavior and recover it after further compression. Pareto-guided selection under joint error-cost objectives retains student models that balance accuracy and efficiency. We evaluate DLNet on a widely used dataset and validate real-device feasibility on an Arduino Nano 33 BLE Sense using int8 deployment. The final deployed student achieves a low error of 0.0066 when predicting battery health over the next 100 cycles, which is 15.4% lower than the teacher model. It reduces the model size from 616 kB to 94 kB with 84.7% reduction and takes 21 ms per inference on the device. These results support a practical smaller wins observation that a small model can match or exceed a large teacher for edge-based prognostics with proper supervision and selection. Beyond batteries, the DLNet framework can extend to other industrial analytics tasks with strict hardware constraints.

02.
arXiv (CS.CV) 2026-06-11

BiWM: Advancing Open-Source Interactive Video World Models with Bidirectional Autoregression

Transitioning bidirectional video diffusion models into an autoregressive paradigm improves the interactivity of video world models, but existing causal pipelines need many stages (control fine-tuning, autoregressive training, causal initialization, few-step distillation) and still trail bidirectional models in quality due to error accumulation. Recent world models such as Yume-1.5 and Matrix-Game-3.0 instead adopt a bidirectional autoregressive approach, gaining fidelity and stable long-horizon rollout from self-correcting error propagation, yet open-source frameworks (e.g., minWM) support only causal models. We present BiWM, the first full-stack framework for interactive video world models under the bidirectional autoregressive paradigm, jointly optimizing generation quality and inference speed. From a pretrained video backbone, BiWM injects camera control by fine-tuning, then runs a few-step Distribution Matching Distillation (DMD) stage that turns the backbone into an action/camera-controllable world model: just two training stages instead of four in minWM, converging in a few hundred steps on 8xH200 GPUs. A single recipe spans Wan2.1-1.3B, Wan2.2-5B, HunyuanVideo-1.5-8B, and LTX-2.3-22B, and also supports secondary fine-tuning of existing bidirectional models. BiWM enables real-world camera control where minWM loses controllability, integrates pluggable history compression (FramePack-style and PackForcing-style) for long rollouts, and offers an optional NVFP4 4-bit training/inference pipeline. To counter DMD's mode-seeking degradation, we add GAN and mass-covering forward-KL objectives that preserve scene dynamics. We open-source BiWM for resource-constrained research and high-fidelity environment simulation.

03.
arXiv (CS.AI) 2026-06-11

A Survey of Reasoning and Agentic Systems in Time Series with Large Language Models

arXiv:2509.11575v3 Announce Type: replace Abstract: Time series reasoning treats time as a first-class axis and incorporates intermediate evidence directly into the answer. This survey defines the problem and organizes the literature by reasoning topology with three families: direct reasoning in one step, linear chain reasoning with explicit intermediates, and branch-structured reasoning that explores, revises, and aggregates. The topology is crossed with the main objectives of the field, including traditional time series analysis, explanation and understanding, causal inference and decision making, and time series generation, while a compact tag set spans these axes and captures decomposition and verification, ensembling, tool use, knowledge access, multimodality, agent loops, and LLM alignment regimes. Methods and systems are reviewed across domains, showing what each topology enables and where it breaks down in faithfulness or robustness, along with curated datasets, benchmarks, and resources that support study and deployment (https://github.com/blacksnail789521/Time-Series-Reasoning-Survey). Evaluation practices that keep evidence visible and temporally aligned are highlighted, and guidance is distilled on matching topology to uncertainty, grounding with observable artifacts, planning for shift and streaming, and treating cost and latency as design budgets. We emphasize that reasoning structures must balance capacity for grounding and self-correction against computational cost and reproducibility, while future progress will likely depend on benchmarks that tie reasoning quality to utility and on closed-loop testbeds that trade off cost and risk under shift-aware, streaming, and long-horizon settings. Taken together, these directions mark a shift from narrow accuracy toward reliability at scale, enabling systems that not only analyze but also understand, explain, and act on dynamic worlds with traceable evidence and credible outcomes.

04.
arXiv (CS.CV) 2026-06-18

InTrain: Intrinsic Trainability for Zero-Cost Neural Architecture Search

Training-free neural architecture search promises efficient discovery of high-performance networks without costly training. However, existing zero-cost proxies rely on fragmented heuristics that fail to capture the fundamental question: what makes an architecture trainable? This paper introduces Intrinsic Trainability (InTrain), a unified theoretical proxy that formalizes trainability as an architectural invariant emerging from two synergistic components: geometric capacity and optimization resilience. We operationalize intrinsic trainability through analysis of neural information processing. Geometric capacity is quantified via the participation ratio of activation covariance eigenspectrum, capturing the effective dimensionality of representation manifolds. Optimization resilience is measured through cumulative gradient health, assessing the robustness of backpropagation across network depth. InTrain synthesizes these dimensions through a scale-invariant multiplicative coupling, which we hypothesize is essential for capturing their synergistic, non-additive relationship. Extensive experiments on standard NAS benchmarks and search spaces demonstrate that InTrain achieves ranking correlations on par with state-of-the-art ensemble-based proxies and outperforms other single-metric methods.

05.
arXiv (CS.CV) 2026-06-12

Multi-Label Test-Time Adaptation with Bayesian Conditional Priors

Multi-label recognition with frozen Vision-Language Models (VLMs) is brittle under distribution shift: standard zero-shot inference scores labels independently, ignoring co-occurrence structure and producing incoherent label sets where dominant concepts suppress weaker but compatible labels. We introduce Bayesian Conditional Priors (BCP) Estimation, a gradient-free test-time adaptation method that injects label dependency without tuning the backbone. BCP views zero-shot logits as a proxy for marginal posteriors under a fixed image-text likelihood and attributes shift-induced errors mainly to a mismatched label prior. For each test image, it selects a high-confidence anchor label and applies an anchor-conditioned Bayesian refinement. This update is closed-form in logit space and admits a pointwise mutual information (PMI) interpretation, explicitly promoting compatible labels and suppressing incompatible ones. BCP operates without target annotations by estimating anchor-conditioned priors online from the unlabeled test stream via lightweight second-order co-occurrence statistics, adding negligible overhead beyond a single forward pass. Across standard multi-label benchmarks and multiple CLIP backbones, BCP consistently outperforms strong TTA baselines, e.g., improving RN50 average mAP from 57.31 to 69.22 and ViT-B/16 from 62.61 to 71.79.

06.
arXiv (CS.CL) 2026-06-16

Progressive Knowledge-Guided Large Language Model Framework for Bearing Fault Diagnosis

Vibration-based bearing fault diagnosis requires resolving three interrelated measurement challenges, including the trade-off between global statistical feature efficiency and local transient signal fidelity, insufficient traceability of measurement features to underlying fault physics, and ineffective multi-source measurement information fusion across diagnostic scales. This paper presents a progressive physics-guided multi-scale vibration signal processing framework that addresses all three challenges within a unified diagnostic pipeline. An 81-dimensional measurement descriptor, derived from bearing kinematic theory and characteristic defect frequencies, establishes a physically traceable feature space enabling real-time fault screening at approximately 20 ms per sample. A fault-adaptive signal segmentation mechanism then directs analytical attention toward fault-relevant waveform regions guided by physics-based priors, without manual feature engineering. Structured fault mechanism knowledge is further encoded implicitly in model parameters during training, enabling autonomous multi-scale measurement fusion without external knowledge dependencies at inference. Validated on four public benchmark datasets under diverse operating conditions, the framework achieves 98.49% diagnostic accuracy with a 12.6-fold reduction in computational cost relative to signal-level baselines. Interpretability analysis confirms that diagnostic feature activations align with established bearing fault mechanics, supporting measurement traceability in safety-critical industrial systems.

07.
arXiv (CS.CV) 2026-06-16

FusionRS: A Large-Scale RGB-Infrared Remote Sensing Dataset for Dual-Modal Vision-Language Foundation Models

Remote sensing vision-language models have advanced Earth observation understanding, but most existing work remains centered on RGB imagery, leaving the complementary information in infrared data underexplored. Infrared images provide distinctive cues, including thermal intensity structures, object boundaries, and illumination-invariant scene features, which can enrich visual-language learning beyond conventional RGB observations. However, a large-scale RGB-infrared-text dataset for remote sensing vision-language modeling is still absent. To address this gap, we introduce FusionRS, the first large-scale RGB-infrared-text dataset designed for dual-modal vision-language learning in remote sensing. FusionRS is constructed by translating diverse public RGB remote sensing images into infrared-style counterparts, forming aligned RGB-IR image pairs. Each pair is associated with conventional scene captions and IR-aware captions that explicitly describe infrared-specific visual properties while preserving semantic content. Based on FusionRS, we train dual-modal vision-language foundation models for RGB-IR joint understanding. We first train CLIP-style models for RGB-IR-text alignment, and then fine-tune generative VLMs for dual-modal RGB-IR captioning. Experiments show that FusionRS improves RGB-IR alignment, infrared-to-text retrieval, and dual-modal captioning over RGB-only and non-IR-aware training settings. Ablation studies further verify that IR-aware captions are crucial for strengthening infrared-language alignment, highlighting the importance of modality-specific textual supervision for more scalable RGB-infrared remote sensing vision-language representation learning.

08.
arXiv (math.PR) 2026-06-15

Ergodicity for stochastic 2D Boussinesq equations with a highly degenerate pure jump Levy noise

arXiv:2503.18045v2 Announce Type: replace Abstract: This study aims to analyze the ergodicity for stochastic 2D Boussinesq equations and explore the impact of a highly degenerate pure jump L\'{e}vy noise acting only in the temperature equation, where this noise could appear on only a few Fourier modes. By leveraging the equi-continuity of the semigroup established through Malliavin calculus and an analysis of stochastic calculus, together with the weak irreducibility of the solution process, we prove the existence and uniqueness of the invariant measure. Moreover, we overcome the main challenge of establishing time asymptotic smoothing properties of the Markovian dynamics corresponding to this system by conducting spectral analysis of the Malliavin covariance matrix.

09.
arXiv (CS.CV) 2026-06-11

DeceptionX: Explainable Deception Detection with Multimodal Large Language Models

Deception detection is a critical and highly challenging task within affective computing and behavioral analysis. Existing deep learning methods typically treat this task as a straightforward classification problem; however, this black-box approach lacks interpretability and fails to capture the complex logical deduction processes utilized by human experts when identifying lies. While Multimodal Large Language Models (MLLMs) have shown potential, applying them effectively requires a bridge between low-level audiovisual cues and high-level logical reasoning. In this paper, we propose DeceptionX, a novel MLLM framework that shifts the paradigm of deception detection from black-box classification to an interpretable Observe-Think-Summarize reasoning process. To address the scarcity of high-quality reasoning data, we first constructed DeceptChain, a high-quality dataset developed through a human-in-the-loop process. This dataset synthesizes fine-grained visual and auditory evidence (such as micro-expressions and vocal tremors) into structured chain-of-thought reasoning data. Furthermore, we propose a three-stage training pipeline and a Discrepancy-Aware Redundancy Elimination~(DARE) strategy for DeceptionX to further enhance the model's generalization capabilities. Extensive experiments demonstrate that DeceptionX not only outperforms existing MLLM baselines and state-of-the-art methods on standard real-world benchmarks but also provides transparent, expert-level reasoning paths, bridging the critical gap between accuracy and interpretability in multimodal deception detection.

10.
arXiv (CS.AI) 2026-06-18

Improving Scientific Document Retrieval with Academic Concept Index

arXiv:2601.00567v2 Announce Type: replace-cross Abstract: Adapting general-domain retrievers to scientific domains is challenging due to the scarcity of large-scale domain-specific relevance annotations and the substantial mismatch in vocabulary and information needs. Recent approaches address these issues through two independent directions that leverage large language models (LLMs): (1) generating synthetic queries for fine-tuning, and (2) generating auxiliary contexts to support relevance matching. However, both directions overlook the diverse academic concepts embedded within scientific documents, often producing redundant or conceptually narrow queries and contexts. To address this limitation, we introduce an academic concept index, which extracts key concepts from papers and organizes them guided by an academic taxonomy. This structured index serves as a foundation for improving both directions. First, we enhance the synthetic query generation with concept coverage-based generation (CCQGen), which adaptively conditions LLMs on uncovered concepts to generate complementary queries with broader concept coverage. Second, we strengthen the context augmentation with concept-focused auxiliary contexts (CCExpand), which leverages a set of document snippets that serve as concise responses to the concept-aware CCQGen queries. Extensive experiments show that incorporating the academic concept index into both query generation and context augmentation leads to higher-quality queries, better conceptual alignment, and improved retrieval performance.

11.
arXiv (CS.AI) 2026-06-17

MapSatisfyBench: Benchmarking Satisfaction-Aware Map Agents through Behavior-Grounded Implicit Decision Factors

arXiv:2606.17453v1 Announce Type: new Abstract: Large language model agents are increasingly integrated into map services. Since map services are embedded in everyday-life scenarios rather than professional task settings, users often express their needs informally, resulting in underspecified queries with many unspoken needs, namely, implicit decision factors that are critical for user satisfaction. Although clarification is an effective way to mitigate this issue, it increases user burden in daily interaction, and a capable agent should first proactively recover such factors from available information sources. However, evaluating this ability is challenging. The first challenge is to determine which implicit decision factors are suitable for evaluation. A factor is evaluable only if it affects user acceptance and can be recovered from information available to the agent before it responds. Second, user satisfaction cannot be reliably represented by a single reference answer, requiring a benchmark that converts satisfaction-relevant factors into objective and quantifiable evaluation targets. To address these challenges, we propose a restore-identify-filter framework that reconstructs complete user needs from behavior-chain evidence, identifies implicit decision factors, and retains only those supported by pre-query evidence. Building on this methodology, we construct MapSatisfyBench from large-scale, real-world anonymized user data and annotate ground truth from five dimensions and enables full-chain evaluation of satisfaction-aware map agents. Experiments show that current agents generally perform well on explicit task completion, but remain limited in satisfying implicit decision factors and proactively acquiring the evidence needed for satisfaction-aware decisions. These findings establish MapSatisfyBench as a benchmark for shifting map-agent evaluation from task completion toward satisfaction-aware spatial decision making.

12.
arXiv (CS.CV) 2026-06-16

Towards UAV Image Dehazing: A UAV Atmospheric Scattering Model, Benchmark, and Geometry-Aware Deep Unfolding Network

In UAV applications, haze significantly obscures distant details and weaken structural information, hindering the recovery of details. Current UAV scenarios still face two key challenges: (i) paired hazy/clean images from the real world are unobtainable, while the classical atmospheric scattering model is inadequate for modeling the spatially non-uniform haze in UAV imagery; (ii) existing dehazing methods struggle to remove the heavy haze accumulated in the upper regions of UAV images. To address these issues, we first propose a UAV Atmospheric Scattering Model (UASM), which explicitly incorporates flight altitude, viewing pitch, and extinction to characterize the non-uniform haze distribution in UAV imaging. Based on UASM, we develop a physics-driven dehazing framework, termed Geometry-aware Proximal Deep Unfolding Network (GP-DUN). Specifically, GP-DUN consists of three key modules: a Latent Geometry Estimator (LGE) that infers transmittance consistent with UAV imaging geometry, a Geometry-aware Gradient Descent Module (GeoGDM) that embeds UASM into the data-fidelity term and performs physics-consistent closed-form updates, and an Pooling-Expert Proximal Mapping Module (PE-PMM) that learns an implicit prior to restore textures and structures beyond the capability of explicit physical modeling. In addition, we further construct UASM-HazeSet, which provides controllable paired synthetic data together with 2,285 real UAV haze images for testing. Extensive experiments show that GP-DUN consistently outperforms existing methods on both UASM-HazeSet and real UAV haze benchmarks.

13.
arXiv (CS.CV) 2026-06-12

VISA: VLM-Guided Instance Semantic Auditing for 3D Occupancy World Models

Semantic 3D occupancy provides a voxelized world state for autonomous driving and robot decision making, but object and rare-class errors can affect free-space interpretation, collision checking, and temporal state propagation. We show that a common VLM strategy, aligning 3D voxel or object features with crop-caption embeddings, improves text-space similarity without reliably improving closed-set occupancy mIoU. Motivated by this mismatch, we propose VISA, a training-time semantic auditing approach for existing occupancy world models. VISA queries an offline VLM on a representative crop of each physical object instance, obtains a structured audit with class hypotheses, plausible confusions, reliability, attributes, and evidence, and propagates it along the object track. The audit is grounded to matched 3D object voxels and distilled into semantic logits through reliability-weighted taxonomy, attribute-factor, and scene-level audit graph losses, while inference remains unchanged and requires no VLM. On nuScenes, averaged across three runs, VISA improves OccWorld from 19.06 to 20.05 mIoU and GaussianWorld from 21.36 to 21.91 mIoU; on GaussianWorld, object mIoU improves from 18.18 to 19.16 and rare-class mIoU from 15.60 to 16.79. These results suggest that VLMs are better suited to closed-set occupancy as reliability-aware semantic auditors than as generic caption-embedding targets.

14.
arXiv (CS.AI) 2026-06-19

Agentic Electronic Design Automation: A Handoff Perspective

arXiv:2606.19795v1 Announce Type: cross Abstract: Electronic design automation (EDA) is inherently multi-stage and handoff-heavy. Design artifacts, flow scripts, and engineering decisions cross tool, session, and organizational boundaries before final implementation, signoff, or release. Each transfer carries explicit and implicit requirements that may not be fully captured by stage-local checks. LLM-based agents now invoke EDA tools directly, embed retrieved knowledge in executable scripts, and hand off state across sessions and stages. Once their outputs condition downstream engineering decisions, the transferred object must satisfy a handoff contract and meet the assumptions of its next consumer. This survey introduces handoff validity as its organizing principle. A handoff is valid when the transferred object satisfies the consumer's acceptance conditions and carries sufficient context, evidence, and provenance for downstream use. We review 82 systems and classify them into three boundary classes. Stage-Bound systems establish validity within a single EDA stage or bounded verification task. Flow-Bound systems preserve coherent workflow state across tools, invocations, and sessions. Organization-Bound systems maintain source grounding, provenance, scope, and admissibility across knowledge and authority boundaries. For each class, we analyze handoff contracts, handoff objects, coordination mechanisms, and open questions. These analyses motivate a five-layer EDA agent communication protocol (EACP), covering the agent discovery, agent message, tool invocation, workflow orchestration, and security and IP protocols. We aim to provide a common vocabulary and research agenda for trustworthy agentic EDA.

15.
arXiv (CS.CV) 2026-06-18

SC3-Eval: Evaluating Robot Foundation Models via Self-Consistent Video Generation

Evaluating generalist robot manipulation policies in the real world is expensive, slow, and difficult to scale. Action-conditioned video world models offer a scalable alternative by simulating policy rollouts. Autoregressive rollouts accumulate compounding errors, observations across multiple camera views must remain mutually consistent, and the evaluator must generalize to policies whose behaviors lie outside the training distribution. We address these challenges with SC3-Eval, a self-consistent video generation recipe that adapts a pre-trained video foundation model into an accurate policy evaluator by enforcing three complementary forms of consistency. First, forward-inverse dynamics consistency jointly trains the model to predict frames from actions and to recover actions from frames, anchoring generated rollouts to a physically plausible action manifold and counteracting the drift a forward-only model cannot penalize. Second, cross-view consistency trains the model to inpaint each camera view from the other, keeping the multi-camera observation coherent over long rollouts without any explicit memory mechanism. Third, test-time consistency reuses the inverse dynamics mode at inference as a per-action-chunk uncertainty signal that terminates rollouts whose generated frames drift away from the requested actions. We also demonstrate SC3-Eval rollouts reproduce the failure modes that policies exhibit in real-world rollouts, supporting fine-grained diagnostic comparison rather than aggregate ranking alone. Across seven real-world vision-language-action policies, SC3-Eval attains a closed-loop Pearson correlation of $0.929$ and MMRV of $0.119$, outperforming three strong prior video-model-based baselines, and generalizes to new tasks.

16.
arXiv (CS.CV) 2026-06-15

LiAuto-GeoX: Efficient Grounded Driving Transformer

Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present LiAuto-GeoX, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that LiAuto-GeoX runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.

17.
arXiv (CS.LG) 2026-06-15

FreshRetailNet-LT: A Stockout-Annotated Censored Demand Dataset for Latent Demand Recovery and Forecasting in Fresh Retail

arXiv:2505.16319v4 Announce Type: replace Abstract: Accurate demand estimation is critical for the retail business in guiding the inventory and pricing policies of perishable products. However, it faces fundamental challenges from censored sales data during stockouts, where unobserved demand creates systemic policy biases. Existing datasets lack the temporal resolution and annotations needed to address this censoring effect. To fill this gap, we present FreshRetailNet-50K, the first large-scale benchmark for censored demand estimation. It comprises 50,000 store-product time series of detailed hourly sales data from 898 stores in 18 major cities, encompassing 863 perishable SKUs meticulously annotated for stockout events. The hourly stock status records unique to this dataset, combined with rich contextual covariates, including promotional discounts, precipitation, and temporal features, enable innovative research beyond existing solutions. We demonstrate one such use case of two-stage demand modeling: first, we reconstruct the latent demand during stockouts using precise hourly annotations. We then leverage the recovered demand to train robust demand forecasting models in the second stage. Experimental results show that this approach achieves a 2.73% improvement in prediction accuracy while reducing the systematic demand underestimation from 7.37% to near-zero bias. With unprecedented temporal granularity and comprehensive real-world information, FreshRetailNet-50K opens new research directions in demand imputation, perishable inventory optimization, and causal retail analytics. The unique annotation quality and scale of the dataset address long-standing limitations in retail AI, providing immediate solutions and a platform for future methodological innovation. The data (https://huggingface.co/datasets/Dingdong-Inc/FreshRetailNet-50K) and code (https://github.com/Dingdong-Inc/frn-50k-baseline}) are openly released.

18.
arXiv (CS.AI) 2026-06-11

TouchThinker: Scaling Tactile Commonsense Reasoning to the Open World with Large-scale Data and Action-aware Representation

arXiv:2606.11637v1 Announce Type: new Abstract: Touch is a key modality for embodied agents to understand the physical world. Although recent work has incorporated tactile signals into language systems for tactile commonsense reasoning, scaling such systems to realistic open-world settings remains challenging due to two key bottlenecks: (1) current tactile reasoning datasets remain limited in format and scale, providing insufficient supervision for reasoning from tactile observations to physical commonsense and hindering the learning of transferable tactile commonsense; (2) Tactile signals are inherently redundant and action-specific, yet existing methods often overlook these properties, resulting in inefficient representations with limited semantic expressiveness. To address these limitations, we propose TouchThinker, a tactile-language framework that scales tactile commonsense reasoning to the open world from both data and representation perspectives. First, we construct TouchThinker-1M, a million-scale, multi-source tactile reasoning dataset covering 415 objects, 8 scenarios, and 7 sensor types, providing a solid data foundation for open-world generalization. We further introduce TouchThinker-Bench, an open-world benchmark with more realistic and diverse tasks. Then, we propose action-aware modeling mechanism to improve tactile representation efficiency and enable efficient reasoning. Experimental results demonstrate that TouchThinker achieves competitive performance against state-of-the-art models across multiple datasets. Our code and dataset will be made available at: https://github.com/lvkailin0118/TouchThinker.

19.
arXiv (quant-ph) 2026-06-16

Trainable Quantum Channels as Computational Primitives for Quantum Learning

arXiv:2606.15808v1 Announce Type: new Abstract: Variational quantum learning is traditionally constrained to unitary dynamics, often treating quantum channels as detrimental noise. In this work, we reformulate the quantum channels as trainable computational primitives and establish a non-unitary quantum machine learning framework grounded in open-system dynamics. We demonstrate that the outputs of channel-enhanced quantum models form a structured superposition of multiple functional components. Each component is governed by an effective observable whose spectrum can be adaptively modulated during training, a significant departure from the spectral invariance in unitary transformations. Moreover, the proposed framework generalizes conventional unitary quantum models by retaining them as a special case while introducing additional non-unitary degrees of freedom. Furthermore, we reveal that trainable quantum channels enrich the optimization geometry through ensemble-averaged gradient and additional optimization directions induced by the Kraus operators. Empirical evaluations on classification tasks using trainable amplitude-damping and phase-damping channels confirm enhanced optimization dynamics and predictive performance. Our work provides a principled approach for leveraging quantum channels as trainable resources and advances the design of high-performance quantum learning architectures.

20.
arXiv (CS.CL) 2026-06-18

Improve Large Language Model Systems with User Logs

Scaling training data and model parameters has long driven progress in large language models (LLMs), but this paradigm is increasingly constrained by the scarcity of high-quality data and diminishing returns from rising computational costs. As a result, recent work is increasing the focus on continual learning from real-world deployment, where user interaction logs provide a rich source of authentic human feedback and procedural knowledge. However, learning from user logs is challenging due to their unstructured and noisy nature. Vanilla LLM systems often struggle to distinguish useful feedback signals from noisy user behavior, and the disparity between user log collection and model optimization (e.g., the off-policy optimization problem) further strengthens the problem. To this end, we propose UNO (User log-driveN Optimization), a unified framework for improving LLM systems (LLMsys) with user logs. UNO first distills logs into semi-structured rules and preference pairs, then employs query-and-feedback-driven clustering to manage data heterogeneity, and finally quantifies the cognitive gap between the model's prior knowledge and the log data. This assessment guides the LLMsys to adaptively filter out noisy feedback and construct different modules for primary and reflective experiences extracted from user logs, thereby improving future responses. Extensive experiments show that UNO achieves state-of-the-art effectiveness and efficiency, significantly outperforming Retrieval Augmented Generation (RAG) and memory-based baselines. We have open-sourced our code at https://github.com/bebr2/UNO .

21.
arXiv (CS.CL) 2026-06-16

Spokes: Optimizing for Diverse Pretraining Data Selection

Diversity plays a critical role in data selection, improving performance under fixed data budgets by reducing redundancy and repetition. However, optimizing for diversity is inherently challenging, as it is a set-level property that depends on interactions between data points rather than individual examples. As a result, existing approaches typically rely on proxies or approximations, which often fail to ensure sufficiently diverse subsets. In this work, we directly optimize diversity by introducing a probabilistic diversification framework based on the G-Vendi score, optimized via exponentiated gradient descent. Our method produces subsets that are substantially more diverse than those obtained via random sampling, achieving a +489 increase in G-Vendi score on a 500k-sample subset. We evaluate our approach on FineWeb and DCLM, where it consistently outperforms existing methods. Notably, SPOKES (diversity-only) improves average downstream performance by +0.4 and +0.5 points over random sampling on DCLM and FineWeb, respectively. More importantly, jointly optimizing for both quality and diversity yields the strongest results: SPOKES achieves gains of +1.5 and +1.4 points on DCLM and FineWeb, outperforming all baselines, including semantic deduplication and quality filtering.

22.
arXiv (CS.AI) 2026-06-18

X+Slides: Benchmarking Audience-Conditioned Slide Generation

arXiv:2606.19256v1 Announce Type: new Abstract: Automatically generating slide decks from source documents is an important application of large language models (LLMs). Existing benchmarks primarily assess slide completeness and technical depth, while overlooking the target audience as a critical real-world factor. For instance, specialists demand rigorous proofs, whereas decision-makers prioritize actionable conclusions. To bridge this gap, we introduce X+Slides, a benchmark specifically designed for audience-conditioned slide generation. Built on a diverse corpus spanning 113 topics and seven presentation scenes, X+Slides employs a dynamic evaluation framework constructed from 8,133 deduplicated, source-grounded probes. By assigning audience-specific utility weights to the same source-grounded probes, X+Slides reports four complementary metrics: Audience Coverage measures how much audience-essential information is conveyed, Domain-wise Coverage shows which information types are covered, Efficiency measures delivered utility per unit of attention cost, and Correctness verifies whether slide claims are supported by the source. Experiments on DeepPresenter, SlideTailor, and NotebookLM show that current systems can recover a substantial but still incomplete part of audience-essential information: at $\tau_A=0.7$, DeepPresenter reaches a best Audience Coverage of 0.714, SlideTailor reaches 0.594, and the NotebookLM ablation reaches 0.853 while showing clear grounding differences. These results indicate that visual quality and broad topic coverage should not be treated as evidence support without source-grounded evaluation.

23.
arXiv (CS.AI) 2026-06-11

Embodied-BenchClaw: An Autonomous Multi-Agent System for Embodied Spatial Intelligence Benchmark Construction

arXiv:2606.11909v1 Announce Type: new Abstract: Benchmarks are essential for evaluating embodied spatial intelligence, yet their construction is labor-intensive, hard to reuse, and difficult to maintain. Existing embodied benchmarks are often static and may quickly become saturated as models improve, limiting their ability to distinguish new capabilities. We propose Embodied-BenchClaw, an autonomous agentic system for constructing embodied spatial intelligence benchmarks. Given a user-specified evaluation intent, Embodied-BenchClaw automatically produces a complete and continually updatable benchmark package through a five-stage pipeline: intent blueprinting, data collection, structuring and cleaning, benchmark synthesis, and evaluation reporting. The pipeline is coordinated by three agents for planning, construction, and evaluation. To improve reusability and reliability, Embodied-BenchClaw introduces an extensible Skill Library and process quality control, enabling benchmark construction to be composable, verifiable, and repairable. We instantiate multiple benchmarks covering indoor spatial reasoning, outdoor spatial reasoning, robotic manipulation, quadruped robot navigation, UAV/aerial-view understanding, and static benchmark enhancement. These benchmarks span diverse embodied carriers, data sources, and spatial capabilities. Experiments with human evaluation, judge-based assessment, consistency checks, cost analysis, and ablations show that Embodied-BenchClaw can construct verifiable, executable, maintainable, and diagnostically useful embodied spatial benchmarks with reduced manual effort.

24.
arXiv (CS.CV) 2026-06-17

Phys4D: Fine-Grained Physics-Consistent 4D Modeling from Video Diffusion

Recent video diffusion models have achieved impressive capabilities as large-scale generative world models. However, these models often struggle with fine-grained physical consistency, exhibiting physically implausible dynamics over time. In this work, we present Phys4D, a pipeline for learning physics-consistent 4D world representations from video diffusion models. Phys4D adopts a three-stage training paradigm that progressively lifts appearance-driven video diffusion models into physics-consistent 4D world representations. We first bootstrap robust geometry and motion representations through large-scale pseudo-supervised pretraining, establishing a foundation for 4D scene modeling. We then perform physics-grounded supervised fine-tuning using simulation-generated data, enforcing temporally consistent 4D dynamics. Finally, we apply simulation-grounded reinforcement learning to correct residual physical violations that are difficult to capture through explicit supervision. To evaluate fine-grained physical consistency beyond appearance-based metrics, we introduce a set of 4D world consistency evaluation that probe geometric coherence, motion stability, and long-horizon physical plausibility. Experimental results demonstrate that Phys4D substantially improves fine-grained spatiotemporal and physical consistency compared to appearance-driven baselines, while maintaining strong generative performance. Our project page is available at https://sensational-brioche-7657e7.netlify.app/

25.
arXiv (CS.AI) 2026-06-16

JADE: Expert-Grounded Dynamic Evaluation for Open-Ended Professional Tasks

arXiv:2602.06486v2 Announce Type: replace Abstract: Evaluating agentic AI on open-ended professional tasks faces a fundamental dilemma between rigor and flexibility. Static rubrics provide rigorous, reproducible assessment but fail to accommodate diverse valid response strategies, while LLM-as-a-judge approaches adapt to individual responses yet suffer from instability and bias. Human experts address this dilemma by combining domain-grounded principles with dynamic, claim-level assessment. Inspired by this process, we propose JADE, a two-layer evaluation framework. Layer 1 encodes expert knowledge as a predefined set of evaluation skills, providing stable evaluation criteria. Layer 2 performs report-specific, claim-level evaluation to flexibly assess diverse reasoning strategies, with evidence-dependency gating to invalidate conclusions built on refuted claims. Experiments on BizBench show that JADE improves evaluation stability and reveals critical agent failure modes missed by holistic LLM-based evaluators. We further demonstrate strong alignment with expert-authored rubrics and effective transfer to HealthBench and DR.BENCH, covering medical and 10-domain professional evaluation settings. Code and data are available at https://github.com/smiling-world/JADE.