×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Wang ×
Shuffle
01.
arXiv (CS.AI) 2026-06-17

Enhanced Evolutionary Multi-Objective Deep Reinforcement Learning for Reliable and Efficient Wireless Rechargeable Sensor Networks

arXiv:2510.21127v2 Announce Type: replace-cross Abstract: Despite rapid advancements in sensor networks, conventional battery-powered sensor networks suffer from limited operational lifespans and frequent maintenance requirements that severely constrain their deployment in remote and inaccessible environments. As such, wireless rechargeable sensor networks (WRSNs) with mobile charging capabilities offer a promising solution to extend network lifetime. However, WRSNs face critical challenges from the inherent trade-off between maximizing the node survival rates and maximizing charging energy efficiency under dynamic operational conditions. In this paper, we investigate a typical scenario where mobile chargers move and charge the sensor, thereby maintaining the network connectivity while minimizing the energy waste. Specifically, we formulate a multi-objective optimization problem that simultaneously maximizes the network node survival rate and mobile charger energy usage efficiency across multiple time slots, which presents NP-hard computational complexity with long-term temporal dependencies that make traditional optimization approaches ineffective. To address these challenges, we propose an enhanced evolutionary multi-objective deep reinforcement learning algorithm, which integrates a long short-term memory (LSTM)-based policy network for temporal pattern recognition, a multilayer perceptron-based prospective increment model for future state prediction, and a time-varying Pareto policy evaluation method for dynamic preference adaptation. Extensive simulation results demonstrate that the proposed algorithm significantly outperforms existing approaches in balancing node survival rate and energy efficiency while generating diverse Pareto-optimal solutions. Moreover, the LSTM-enhanced policy network converges 25% faster than conventional networks, with the time-varying evaluation method effectively adapting to dynamic conditions.

02.
arXiv (CS.LG) 2026-06-16

RepNet: Tackling spectral bias in deep neural networks via parameter reparameterization

arXiv:2606.16575v1 Announce Type: new Abstract: Deep neural networks (DNNs) have achieved remarkable success in scientific computing, yet they often suffer from spectral bias in capturing oscillatory and multiscale behaviors. In this study, we investigate this limitation by examining the failure of shallow ReLU neural networks in fitting high-frequency functions. This observation identifies two important factors in resolving rapid oscillations: the initial slope scale and the distribution of partition points induced by the networks. Motivated by this analysis, we propose RepNet, a reparameterized DNN model for ReLU and tanh networks designed for high-frequency and multiscale problems. The key idea is to reparameterize the weights and biases in the first hidden layer, which enables effective control of the initial slope scale and provides an appropriate distribution of the initial partition points. Furthermore, treating the reparameterized weights and biases as trainable parameters allows the DNN to achieve adaptive frequency scaling during training. In addition, we derive quantitative estimates for the output and slope magnitudes of the reparameterized DNN to guide the initialization of the proposed method. Numerical experiments, including multiscale one- and four-dimensional function approximation, forward and inverse PDE problems in combination with physics-informed neural networks (PINNs), and operator learning, demonstrate that RepNet improves the predicted accuracy of vanilla DNNs in capturing highly oscillatory features with slightly additional computational cost. These results indicate that RepNet provides an effective and flexible approach for overcoming spectral bias and applying DNNs to multiscale problems.

03.
arXiv (CS.LG) 2026-06-11

Geometric bias in eigenspace perturbation under random heterogeneous noise

arXiv:2606.11263v1 Announce Type: cross Abstract: Spectral methods rely fundamentally on the stability of principal eigenspaces under random perturbations. Classically, this stability is quantified by the Davis-Kahan and Wedin theorems, which bound the eigenspace error using the operator norm of the noise and the relevant spectral gaps. While these worst-case bounds are sharp for arbitrary deterministic perturbations, they can be wasteful in the low-rank signal-plus-random-noise setting, as they fail to capture the fine-grained interaction between the signal geometry and the noise distribution. In this paper, we study the spectral perturbation of signal-plus-noise matrices corrupted by sparse, random noise with an arbitrary, inhomogeneous variance profile. We demonstrate that under heterogeneous noise variances, the empirical eigenvectors suffer a systematic, deterministic geometric bias that is entirely invisible to classical perturbation bounds. By leveraging the Quadratic Vector Equation (QVE) and establishing fine-grained isotropic local laws, we derive near-optimal, non-asymptotic perturbation bounds for the leading eigenspaces in the operator and $2\to\infty$ norms. The bounds separate the usual signal-to-noise contribution, stochastic fluctuations, and structured geometric bias terms determined by the alignment between the signal eigenspaces and the row-wise variance profile.

04.
bioRxiv (Bioinfo) 2026-06-11

HalluDesign-NA: Extending HalluDesign for De Novo Nucleic Acid Design

AlphaFold3 has revolutionized the prediction of biomolecular structures and interactions, including atomic-level modeling of nucleic acids. However, the de novo design of structured and functional nucleic acids remains a significant challenge. Here, we extend our HalluDesign framework to nucleic acid design by integrating NA-MPNN for nucleic acid sequence optimization and design. This new framework, HalluDesign-NA, enables iterative sequence-structure co-optimization, facilitating the de novo design of nucleic acids. Computational benchmarking across ssDNA, ssRNA, and aptamer design tasks demonstrates consistent improvements in confidence scores (pLDDT, ipTM), supporting the feasibility of de novo nucleic acid design under various constraints, such as sequence length, symmetry, and protein structure context. We anticipate that HalluDesign-NA will accelerate the de novo design of functional nucleic acids for applications in biotechnology and medicine. The source code for HalluDesign-NA is available at https://github.com/MinchaoFang/HalluDesign_NA.

05.
arXiv (CS.CV) 2026-06-11

Contactless 3D Human Body Measurement Using Depth Cameras for Smart Health Monitoring

Contactless body measurement technologies are becoming increasingly significant for smart health monitoring, digital health applications, and remote patient assessment. Traditional anthropometric measurements typically necessitate physical contact and trained personnel, which may constrain scalability in remote healthcare settings. In this study, we introduce a depth camera-based framework for estimating human body measurements utilizing 3D point cloud data. An Orbbec Astra 2 depth camera was employed to capture RGB images, depth maps, and 3D point clouds of participants. The captured point cloud was processed using Python-based tools, including Open3D, NumPy, and OpenCV, to segment the human body from the background. Key anthropometric measurements, such as height and arm span, were computed. The measurements were obtained through a combination of spatial filtering and landmark selection on the 3D point cloud, followed by the projection of the computed measurements onto the corresponding RGB image using camera intrinsic parameters. In addition to linear measurements, the approximate body volume and visible surface area were estimated using voxel-based occupancy analysis and mesh-based surface reconstruction methods. The experimental results from a single depth capture demonstrated that accurate body measurements and geometric estimates could be obtained from depth camera data without physical contact. This study provides a foundation for future real-time systems that integrate depth sensing with intelligent health monitoring and generative AI models for smart healthcare applications.

06.
arXiv (CS.CV) 2026-06-19

Timage: A Generative Text-in-Image Paradigm for Fine-Tuning Vision-Language Models

Multimodal Large Language Models (MLLMs) often lose track of the right image regions during fine-grained spatial reasoning, because a textual query rarely carries any explicit geometric anchor into the pixel domain. Prevailing remedies either rewire the model's weights or pad the prompt with verbose instructions, yet neither reliably pins the language to the correct visual coordinates without eroding the backbone's general competence. We introduce Timage, a paradigm that recasts multimodal understanding as an alignment problem solved at the input: the query is drawn, as a typeset overlay, onto the image itself. The placement and appearance of this overlay are produced by a Constrained Schrödinger Bridge (cSB), an entropic optimal-transport sampler that factorizes layout synthesis into two coupled stochastic stages. The first stage, Region Search, transports noise toward query-aligned image zones while obeying a hard occlusion barrier that protects salient foreground content; the second stage, Appearance Shaping, sizes the glyphs through an ``ink-budget'' regularizer so that the rendered text stays legible and visually balanced. The resulting overlay behaves as an explicit attention beacon that channels the model's focus along spatial semantics. On the VMCBench suite, Timage paired with a modest 7B backbone clearly overtakes far larger proprietary systems as well as parameter-tuned baselines. The study positions deliberate input reconstruction as a powerful, architecture-neutral lever for strengthening multimodal reasoning.

07.
arXiv (CS.CL) 2026-06-18

Learning User Simulators with Turing Rewards

Learning to simulate human users in interactive settings could advance the training of agent assistants, evaluation of personalization systems, research in the social sciences, and more. Existing approaches generally do so by training a large language model (LLM) to match a single ground truth response, either by maximizing the log probability or by using a similarity reward. We instead propose {Turing-RL}: a Turing-Test-based reinforcement learning approach for training user simulator models. {Turing-RL} uses a discriminative Turing reward with an LLM judge to score how indistinguishable a generated response is from the real user's given the user's history, and the user simulator LLM learns to produce responses indistinguishable from what the user could have said with such rewards. Across two different domains–conversational chat and Reddit forum discussion–we find that {Turing-RL} consistently outperforms baseline methods on both LLM and human evaluation metrics. Our study suggests that optimizing for indistinguishability, rather than response matching, is effective for learning user simulators.

08.
arXiv (CS.AI) 2026-06-19

Concept Flow Models: Anchoring Concept-Based Reasoning with Hierarchical Bottlenecks

arXiv:2606.19489v1 Announce Type: cross Abstract: Concept Bottleneck Models (CBMs) enhance interpretability by projecting learned features into a human-understandable concept space. Recent approaches leverage vision-language models to generate concept embeddings, reducing the need for manual concept annotations. However, these models suffer from a critical limitation: as the number of concepts approaches the embedding dimension, information leakage increases, enabling the model to exploit spurious or semantically irrelevant correlations and undermining interpretability. In this work, we propose Concept Flow Models (CFMs), which replace the flat bottleneck with a hierarchical, concept-driven decision tree. Each internal node in the hierarchy focuses on a localized subset of discriminative concepts, progressively narrowing the prediction scope. Our framework constructs decision hierarchies from visual embeddings, distributes semantic concepts at each hierarchy level, and trains differentiable concept weights through probabilistic tree traversal. Extensive experiments on diverse benchmarks demonstrate that CFMs match the predictive performance of flat CBMs, while substantially mitigating information leakage by reducing effective concept usage. Furthermore, CFMs yield stepwise decision flows that enable transparent and auditable model reasoning with hierarchical class structures.

09.
arXiv (CS.CL) 2026-06-12

HyperTool: Beyond Step-Wise Tool Calls for Tool-Augmented Agents

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

10.
arXiv (CS.AI) 2026-06-11

Human-Enhanced Loop Modeling (HELM): Agent-Based Finite Element Modeling of Concrete Bridge Barriers

arXiv:2606.12025v1 Announce Type: new Abstract: Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.

11.
arXiv (CS.CV) 2026-06-18

SP-TransientBench: A Real-Captured Single Photon Perception Benchmark

Single-photon LiDAR (SPL) based on single-photon avalanche diode (SPAD) sensing enables time-resolved photon measurements with extreme sensitivity, offering unique potential for active 3D perception in photon-starved scenarios.However, real-world single photon perception remains fundamentally challenging due to unique measurement noise and complex multi-return transient phenomena, which jointly complicate geometric reconstruction and semantic scene understanding. Despite growing interest in SPAD-based sensing, existing studies are largely limited to simulated data or small-scale controlled captures. As a result, systematic evaluation of real-world single photon perception across depth estimation, multi-view reconstruction, and 3D semantic understanding remains underexplored. To bridge this gap, we introduce SP-TransientBench (STB), a real-captured multi-task benchmark for single photon perception. SP-TransientBenc comprises 10 diverse scenes and 10,297 views captured using a solid-state single-photon LiDAR at $256\times192$ resolution. Each view provides full time-of-flight histograms with multi-return behavior,standardized metadata, and calibrated camera poses for multi-view evaluation. We further provide 13-class 3D semantic annotations for selected scenes. By providing dedicated data splits and evaluation protocols for each task, STB enables consistent and reproducible benchmarking of real-world single photon perception across multiple 3D vision problems. The dataset and code will be released upon acceptance.

12.
arXiv (CS.AI) 2026-06-16

FORTIS: Benchmarking Over-Privilege in Agent Skills

arXiv:2605.09163v3 Announce Type: replace Abstract: Large language model agents increasingly operate through an intermediate skill layer that mediates between user intent and concrete task execution. This layer is widely treated as an organizational abstraction, but we argue it is also a privilege boundary that current models routinely exceed. We present FORTIS, a benchmark that evaluates over-privilege in agent skills across two stages: whether a model selects the minimally sufficient skill from a large overlapping library, and whether it executes that skill without expanding into broader tools or actions than the skill permits. Across ten frontier models and three domains, we find that over-privileged behavior is the norm rather than the exception. Models consistently reach for higher-privilege skills and tools than the task requires, failing at both stages at rates that remain high even for the strongest available models. Failure is especially severe under the ordinary conditions of real user interaction: incomplete specification, convenience framing, and proximity to skill boundaries. None of these requires adversarial construction. The results indicate that the skill layer, far from containing agent behavior, is itself a primary source of privilege escalation in current systems.

13.
bioRxiv (Bioinfo) 2026-06-14

Somatic variant detection in normal tissues from single-cell sequencing data

A crucial advantage of single-cell sequencing (SCS) is its ability to identify somatic variants in individual cells, enabling phylogenetic analysis of cellular populations within bulk tissues. While identifying somatic variants in tumor tissues via SCS has become a common practice, doing so in normal tissues remains challenging due to the rarity of somatic variants in normal cells. To evaluate the feasibility of somatic variant calling from widely available single-nucleus RNA-seq (snRNA-seq) and single-nucleus ATAC-seq (snATAC-seq) data, we profiled a Cell-line mix of six HapMap samples prepared by the SMaHT consortium using 10x Genomics 5' snRNA-seq (12k cells with 36k mean reads per cell) and snATAC-seq (11k cells with 14k median high-quality fragments per cell) for variant calling. PacBio long-read whole genome sequencing (WGS) data (109x) generated from individual cell lines were used as ground truth. Two computational tools, Monopogen and SComatic, were used for somatic variant calling from the SCS data. Monopogen achieved single nucleotide variant (SNV) detection accuracies of 93.30% in the snRNA-seq and 99.64% in the snATAC-seq data, both of which outperformed SComatic (74.35% and 94.29%, respectively). Monopogen also consistently detected somatic SNVs at cellular fractions as low as 0.5% (2.54% in snRNA and 0.81% in snATAC) in individual samples. Notably, snATAC-seq exhibited higher genomic coverage breadth and larger number of variants detected than snRNA-seq. While the SCS data have lower overall genome coverage than that of the bulk WGS, the single-cell level variant resolution allows Monopogen to assign variants to their cells of origin with over 80% accuracy in both RNA and ATAC modalities, thereby facilitating studies of clonal evolution and cell-type-specific mutagenesis. Other benchmarking methods were also evaluated (DeepVariant, Cellsnp-lite and Mutect2) for comparison. In conclusion, our study demonstrated the feasibility of performing reliable single-cell somatic mutation calling in a cell-line mixture and discussed the strengths and limitations of current computational methods when applied to normal tissues.

14.
arXiv (CS.CL) 2026-06-19

When Lower Privileges Suffice: Investigating Over-Privileged Tool Selection in LLM Agents

As LLM agents increasingly select tools autonomously, their choices among tools with different privileges become safety-relevant. However, prior tool-selection studies focus on safety-agnostic metadata preferences, leaving privilege-sensitive choices underexplored. To address this gap, we study over-privileged tool selection, in which an agent selects or escalates to a higher-privilege tool despite a sufficient lower-privilege alternative. We introduce ToolPrivBench to evaluate whether agents choose higher-privilege tools despite sufficient lower-privilege alternatives, measuring both initial selection and escalation after transient tool failures. Across eight domains and five recurring risk patterns, we find that over-privileged tool selection is common among mainstream LLM agents and is further amplified by transient failures. We further find that general safety alignment does not reliably transfer to least-privilege tool choice, while prompt-level controls provide only limited mitigation under transient failures. We therefore introduce a privilege-aware post-training defense that teaches agents to prefer sufficient lower-privilege tools and escalate only when necessary. Our mitigation experiments show that this defense substantially reduces unnecessary high-privilege tool use while preserving general capabilities.

15.
arXiv (CS.CV) 2026-06-16

DenseControl: Instance-Level Controllable Synthesis of Dense Crowd Image

In this paper, we introduce DenseControl, a novel pipeline for generating dense crowd images. Specifically, DenseControl meticulously positions and sizes each generated instance to align precisely with the predefined coordinates and scales. Based on this, we further allow for control over the background, style, and attributes of instances. The motivation behind DenseControl stems from the observation of two main challenges in synthesizing crowd images: controlling signal embedding and maintaining topological integrity when imparting instance scale guidance. To address these, we first introduce the Isolated Object Embedding (IOE) map, a novel representation that facilitates spatial location control while mitigating the difficulties associated with learning projections for model. Secondly, we propose an Implicit Scale Embedding (ISE) strategy that seamlessly integrates with the IOE map to encode precise scale information. To further enhance the efficacy of combining ISE with the IOE map, we incorporate a Position Shortcut mechanism that enhances cross-attention to alleviate projection challenges. We evaluate DenseControl through two lenses: synthesis quality and applicability in latent applications. Experiments across different control conditions demonstrate DenseControl achieves state-of-the-art results in dense crowd image synthesis. Furthermore, we showcase applications in augmenting crowd analysis under data scarcity, transfer learning, and weather generalization scenes, to highlight the practical utility of DenseControl. The codebase will be released.

16.
arXiv (CS.CV) 2026-06-12

GAE: Unleashing Physical Potential of VLM with Generalizable Action Expert

Vision-language models demonstrate strong reasoning and planning abilities, yet grounding these predictions into precise robot actions remains a central challenge. Existing Vision-Language-Action methods typically entangle reasoning and action generation, leading to limited generalization. We propose Generalizable Action Expert (GAE), a task-agnostic model that converts sparse geometric plans into dense robot actions. Our approach introduces a sparse geometric interface: the VLM predicts sparse 3D waypoints representing high-level intention, while GAE maps these waypoints together with real-time point cloud observations to continuous action trajectories. GAE is pretrained on a large-scale pointcloud-trajectory dataset comprising 150k trajectories from both simulation and real-world robots. To further improve efficiency and generalization, we introduce an Action Pre-training, Pointcloud Fine-tuning (APPF) scheme that decouples learning action dynamics from geometry grounding. After pretraining, GAE is frozen and reused across downstream tasks, requiring only lightweight fine-tuning of the VLM to produce the sparse interface. Experiments show that our method achieves strong performance and generalization across diverse visual domains, camera viewpoints, and natural language instructions.

17.
arXiv (quant-ph) 2026-06-11

Circulators Based on Coupled Quantum Anomalous Hall Insulators and Resonators

arXiv:2505.07770v2 Announce Type: replace Abstract: Integrated plasmonics is advancing rapidly, enabling a wide range of functionalities to be incorporated onto a single chip. Applications span information processing, computation, quantum sensing, and dark-matter detection. This progress has driven the development of integrated non-reciprocal devices, which are essential for preventing unwanted feedback that can degrade system performance. While non-reciprocal devices have been realized in edge magnetoplasmon materials via classical interference effects, their operation is often limited by the input power range. Here, we demonstrate that topological circulators utilizing asymmetric coupling offer improved input power range, isolation, and insertion loss. In this configuration, we demonstrate the coupling between a chiral edge magnetoplasmonic resonator and a pair of LC resonators is well described by an effective non-Hermitian two-site Hatano-Nelson model with asymmetric directional couplings, resulting in nonreciprocal behavior. The coherent photon-plasmon interaction enables a circulator with up to 50 dB of isolation across a broad range of excitation power. These results suggest that magnetic topological insulators provide a promising platform for realizing asymmetric non-Hermitian couplings at radio frequencies and for exploring regimes of strong directional suppression and possible exceptional-point physics. More broadly, they highlight the potential of topological-material-based microwave devices for future integration with superconducting quantum information platforms.

18.
arXiv (CS.LG) 2026-06-15

Efficient On-Device Diffusion LLM Inference with Mobile NPU

arXiv:2606.13740v1 Announce Type: new Abstract: Diffusion large language models (dLLMs) accelerate generation by denoising multiple tokens in parallel, making them attractive for latency-sensitive mobile inference. However, repeated denoising introduces substantial computation on smartphones. Mobile neural processing units (NPUs) offer high-throughput dense matrix computation, but efficiently exploiting them remains challenging: token commitment shrinks per-block effective workloads, token revision complicates KV cache reuse, and limited NPU-visible address space incurs costly remapping and data transfer overheads. In this paper, we propose llada.cpp, the first NPU-aware inference framework for accelerating dLLMs on smartphones. llada.cpp aligns block-wise dLLM inference with the execution characteristics of mobile NPUs through three techniques. (1) Multi-Block Speculative Decoding fills the shrinking workload in late-stage current-block decoding with speculative future-block tokens. (2) Dual-Path Progressive Revision keeps committed tokens revisable until stable and refreshes unstable tokens through a CPU-side path without stalling dense NPU execution. (3) Swap-Optimized Memory Runtime compacts NPU-visible address layouts and overlaps data staging with NPU computation to reduce remapping and transfer overheads. We implement llada.cpp as an end-to-end framework and evaluate it across diverse hardware platforms and dLLM workloads. llada.cpp reduces LLaDA-8B generation latency by 17x-42x over the CPU baseline with prefix KV cache reuse, while preserving generation quality.

19.
arXiv (CS.AI) 2026-06-19

AutoPass: Evidence-Guided LLM Agents for Compiler Performance Tuning

arXiv:2606.20373v1 Announce Type: cross Abstract: Large Language Models (LLMs) show promise for code compilation tasks, but applying them to runtime performance tuning is difficult due to complex microarchitectural effects and noisy runtime measurements. We present AutoPass, a multi-agent framework for compiler performance tuning that uses compiler and runtime evidence to guide LLM-generated optimization decisions. Rather than treating the compiler as a black box like prior auto-tuning schemes, AutoPass opens up the compiler to the LLM, enabling it to query compiler-internal optimization states and analyze the intermediate representation to orchestrate compiler options. The search process iteratively refines optimization configurations using measured runtime feedback to diagnose regressions and guide latency-improving edits. AutoPass operates in an inference-only, training-free setting and requires no offline training or task-specific fine-tuning, making it readily applicable to new benchmarks and platforms. We implement AutoPass on the LLVM compiler and evaluate it on server-grade x86-64 and embedded ARM64 systems. AutoPass outperforms expert-tuned heuristics and classical autotuning methods, achieving geometric-mean speedups of 1.043x and 1.117x over LLVM -O3 on x86-64 and ARM64, respectively.

20.
arXiv (CS.AI) 2026-06-15

FreoStream:Enhancing Stream Guardrails via Future-Aware Reasoning and Safety-Aligned Optimization

arXiv:2606.13737v1 Announce Type: cross Abstract: Stream guardrails enable token-level safety detection before full responses are generated. However, they often make overly conservative judgements and block those sensitive but safe tokens, which is known as over-refusal. Due to lack of full context, they also fail to detect implicitly harmful content from jailbreaking. To address these challenges, we propose FreoStream, a novel streaming guardrail framework. Specifically, FreoStream fine-tunes a LoRA module to perform Future-Aware Reasoning when the base guardrail detects unsafe tokens. The reasoning process follows a Future-Reason-Judge paradigm: predict the future, reason about the full context and give the final judgement. This design can effectively reduce over-refusal by incorporating the future information. Moreover, we introduce the Safety-Aligned Optimization module that extracts the safety-aligned component from the reasoning gradients to update the base guardrail model, thereby enhancing streaming safety detection. Extensive experiments on various safety benchmarks demonstrate that FreoStream achieves lower over-refusal rates and better jailbreak defense compared to existing streaming guardrails.

21.
arXiv (CS.LG) 2026-06-16

How Post-Training Shapes Biological Reasoning Models

arXiv:2606.16517v1 Announce Type: new Abstract: Scientific reasoning models for biology combine language models with foundation models trained on multimodal biological data, including DNA, RNA, and proteins. These models are built through post-training, yet how each stage shapes reasoning and generalization remains poorly understood. We study when post-training improves performance and when it induces over-specialization. Across genomics, transcriptomics, and proteins, we train and evaluate more than 100 biological reasoning models under controlled variation in backbone, continued pre-training (CPT), supervised fine-tuning (SFT), and reinforcement learning (RL), measuring both in-domain (ID) and out-of-domain (OOD) performance. We find that each post-training stage reshapes generalization in a distinct way rather than contributing uniform gains. CPT improves downstream performance by aligning models with biological language. SFT consistently increases ID performance but causes OOD performance to peak early and decline as models fit the training distribution. RL, when applied to strong SFT checkpoints with aligned rewards, improves OOD performance and partially recovers generalization. These results show that biological reasoning does not improve monotonically with additional supervision or compute. Instead, performance depends on how training stages are composed. Under fixed post-training budgets, the strongest ID-OOD trade-off comes from brief SFT, larger RL allocations, and asymmetric adaptation capacity across stages.

22.
arXiv (CS.CV) 2026-06-15

LiAuto-GeoX: Efficient Grounded Driving Transformer

Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present LiAuto-GeoX, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that LiAuto-GeoX runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.

23.
arXiv (quant-ph) 2026-06-19

Unleashing Emergent Fermions with Rydberg Atom Simulators

arXiv:2606.19444v1 Announce Type: cross Abstract: Rydberg atom simulators, in both analog and digital modes, have attracted significant recent interest due to their versatile geometric reconfigurability. In this work, leveraging this feature, we propose two complementary approaches, one for each mode, to characterize emergent fermions in critical quantum many-body systems. In the analog mode, we assemble the Rydberg atoms in a "developable" (namely, preserving local couplings) Möbius band geometry to realize antiperiodic boundary conditions, where fermionic states reside. Spectroscopic measurement in this sector then reveals universal energy ratios of the bosonic and fermionic states. In the digital mode, we carry out a fermionic version of Kibble-Zurek ramping with a quantum circuit, directly addressing the fermionic scaling form. Reconfigurability allows an exponential speed-up of this task, with an $O(\log L\log\log L)$ circuit-depth overhead. Our work establishes the Rydberg atom simulator as a uniquely powerful platform to attack the notoriously difficult issue of experimentally probing emergent fermions that are nonlocally defined in a bosonic system.

24.
bioRxiv (Bioinfo) 2026-06-19

Geometric Deep Learning Reveals Ligandable and Cryptic RNA Binding Small Molecule Pockets (SMARTPocket)

RNAs are important therapeutic targets, however identifying ligandable small-molecule binding pockets remains a major barrier to RNA-targeted drug discovery. Here, SMARTPocket, an atomic-level geometric deep learning framework for predicting RNA-small molecule binding pockets directly from three-dimensional structure is introduced. SMARTPocket represents RNA as full-atom point clouds and uses transfer learning from more than 110,000 protein binding interface structures to overcome the limited number of experimentally elucidated RNA-ligand complexes. Across four established single-chain benchmarks and three broader curated benchmarks, SMARTPocket consistently outperforms existing RNA pocket predictors and general biomolecular modeling approaches. The model generalizes to apo RNA structures when conformational changes are modest, identifies cryptic ligandable pockets, and recapitulates experimentally validated binding sites in the SARS-CoV-2 frameshifting element and an RNA aptamer evolved to bind small molecules. SMARTPocket-guided docking further improves near-native RNA-ligand pose recovery and computational efficiency compared with blind docking. These results establish SMARTPocket as a generalizable framework for structure-based identification of ligandable RNA pockets and for accelerating discovery of RNA-targeted small molecules.

25.
arXiv (CS.CV) 2026-06-16

JoyAI-VL-Interaction: Real-Time Vision-Language Interaction Intelligence

Many moments in the real world do not wait for a user to ask. A fire starts on a security monitor, an expression flickers across a video call, or a product a viewer wants flashes by in a livestream. Yet today's large models remain mostly turn-based by design: they answer only when addressed, and even video-call apps that appear interactive still operate as question-answer systems, reacting only when polled or prompted. We argue for a different paradigm: a model that is present in the world like a person. It continuously watches what is happening now, decides on its own whether to speak or stay silent, interacts in real time, and delegates to a background model when the problem is hard. To advance interaction models and their adoption across domains, we make two fully open-sourced contributions. First, we release JoyAI-VL-Interaction, an 8B-scale, vision-first VL-interaction model. The model makes the response decision internally, choosing each second to stay silent, respond, or delegate to a background model, and it excels at vision-triggered responsiveness and time awareness. We pair it with a transferable training recipe, from which capabilities we never trained for emerge, such as guiding a shopper through changing app screens or improvising a lecture from a slide deck. Second, we release a complete, deployable system built around that model. The system streams any ongoing video into the model, making it genuinely present in the world. All other components are pluggable, including ASR/TTS modules, memory, visualization UI, and a background brain that can connect to any API or agent. Across six real-world scenarios, human raters prefer JoyAI-VL-Interaction over the in-app video-call assistants of Doubao and Gemini by a wide margin. To our knowledge, this is the first open, vision-driven interaction model released together with its training recipe, data, and complete deployable system.