×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Tian Jin ×
换一批
01.
arXiv (CS.LG) 2026-06-16

GD$^2$PO: Mitigating Multi-Reward Conflicts via Group-Dynamic reward-Decoupled Policy Optimization

arXiv:2606.16771v1 Announce Type: new Abstract: As LLMs advance, post-training reinforcement learning (RL) increasingly relies on multi-dimensional rewards to cultivate comprehensive capabilities. This shift demands new algorithms capable of optimizing diverse and potentially competing objectives simultaneously. To address this, existing methods such as Group reward-Decoupled Policy Optimization (GDPO) decompose the overall score into independent reward groups, then compute the RL loss separately within each group. However, this strategy still encounters multi-reward conflicts: a single rollout can yield positive advantages on certain reward dimensions but negative ones on others, causing opposing signals to cancel each other out during aggregation, further hindering RL training efficiency. Inspired by Dynamic sAmpling Policy Optimization (DAPO), which improves RL training efficiency by filtering out ineffective rollouts with near-zero advantages, we propose Group-Dynamic reward-Decoupled Policy Optimization (GD$^2$PO). Specifically, GD$^2$PO employs a conflict-aware filtering mechanism to mask out rollouts suffering from severe reward-wise disagreement. By preventing conflicting signals from canceling each other out, this masking strategy preserves and enhances the magnitude of effective RL advantages, thereby significantly accelerating learning efficiency. Furthermore, we introduce query-level reweighting to dynamically adjust the update intensity of each query based on its overall reward consensus. Experiments on various multi-reward scenarios, including tool calling and human preference alignment, demonstrate that GD$^2$PO consistently and significantly outperforms existing baselines. The code is available at https://github.com/Qwen-Applications/GD2PO.

02.
arXiv (quant-ph) 2026-06-17

Experimental Characterization and Modeling of Measurement-Induced State-Transitions in a Fluxonium Superconducting Qubit

arXiv:2606.17866v1 Announce Type: new Abstract: Superconducting qubits are most often measured using dispersive readout, which, ideally, implements a projective quantum non-demolition (QND) measurement. While a larger readout drive can increase the signal and, thus, reduce discrimination errors in the readout, strong microwave drives may also cause non-QND errors by driving the qubit to a state outside the computational subspace. In this work, we experimentally characterize measurement-induced state transitions (MIST) in a fluxonium qubit over its full external flux range. We further numerically calculate the MIST errors, and find that the theory accurately predicts eleven experimentally identified regions with increased MIST. In addition to transitions to higher fluxonium levels, we also find that, at certain flux points, MIST errors are dominated by transitions that include the transmission-line-like array modes of the fluxonium's superinductor. The excellent match between theory and experiment validates that the models accurately predict the occurrence of MIST in these systems, and further highlights the influence of array modes in fluxonium readout.

03.
arXiv (CS.CV) 2026-06-11

P3D-Bench: Benchmarking MLLMs for Parametric 3D Generation and Structural Reasoning

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

04.
arXiv (CS.AI) 2026-06-18

Externalizing Research Synthesis and Validation in AI Scientists through a Research Harness

arXiv:2606.18874v1 Announce Type: new Abstract: AI systems can increasingly automate scientific workflows, but the reasoning that links prior evidence, generated ideas, experiments and final claims often remains implicit inside model inference. Here we introduce Xcientist, a research harness that externalizes research synthesis and experimental validation into inspectable, contract-governed processes. Xcientist organizes literature evidence, idea states, implementation plans, ablation records and repair traces as persistent research artifacts, so that generated mechanisms can be grounded, executed, tested and revised without losing their evidential basis. We identify claim drift as a failure mode of automated research, where runnable artifacts no longer support the mechanism originally claimed. Across training-free memory systems, graph-structured traffic forecasting and multi-scale physics-informed neural networks, Xcientist preserves traceable trajectories from problem formulation to mechanism design, validation and bounded revision. These results suggest that AI scientists should be evaluated not only by their final artifacts, but by whether their synthesis and validation processes remain attributable, inspectable and scientifically accountable.

05.
arXiv (CS.AI) 2026-06-11

Embodied-BenchClaw: An Autonomous Multi-Agent System for Embodied Spatial Intelligence Benchmark Construction

arXiv:2606.11909v1 Announce Type: new Abstract: Benchmarks are essential for evaluating embodied spatial intelligence, yet their construction is labor-intensive, hard to reuse, and difficult to maintain. Existing embodied benchmarks are often static and may quickly become saturated as models improve, limiting their ability to distinguish new capabilities. We propose Embodied-BenchClaw, an autonomous agentic system for constructing embodied spatial intelligence benchmarks. Given a user-specified evaluation intent, Embodied-BenchClaw automatically produces a complete and continually updatable benchmark package through a five-stage pipeline: intent blueprinting, data collection, structuring and cleaning, benchmark synthesis, and evaluation reporting. The pipeline is coordinated by three agents for planning, construction, and evaluation. To improve reusability and reliability, Embodied-BenchClaw introduces an extensible Skill Library and process quality control, enabling benchmark construction to be composable, verifiable, and repairable. We instantiate multiple benchmarks covering indoor spatial reasoning, outdoor spatial reasoning, robotic manipulation, quadruped robot navigation, UAV/aerial-view understanding, and static benchmark enhancement. These benchmarks span diverse embodied carriers, data sources, and spatial capabilities. Experiments with human evaluation, judge-based assessment, consistency checks, cost analysis, and ablations show that Embodied-BenchClaw can construct verifiable, executable, maintainable, and diagnostically useful embodied spatial benchmarks with reduced manual effort.

06.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

07.
arXiv (CS.AI) 2026-06-16

EChO-Agent: Evidence Chain Orchestration Agent for Audio Reasoning

arXiv:2606.15141v1 Announce Type: cross Abstract: While LALMs show promise on audio question answering, they fail to focus on question-relevant segments of audio and provide a clear, checkable reasoning process when dealing with complex audio reasoning. Reinforcement learning and tool-augmented prompting can help models better relate questions to audio but lack a reliable way to understand, integrate, and self-verify audio segments. To address this gap, we present EChO-Agent, a modular agent framework that reformulates complex audio QA as a planning, tool execution, evidence integration, and answer verification workflow. Experiments on MMAR benchmark show EChO-Agent improves both accuracy and rubric scores over baseline and ablation studies show evidence integration is the key factor.

08.
arXiv (CS.CL) 2026-06-12

MaxProof: Scaling Mathematical Proof with Generative-Verifier RL and Population-Level Test-Time Scaling

We present MaxProof, a population-level test-time scaling framework for competition-level mathematical proof in the MiniMax-M3 series. M3 first trains three proof-oriented capabilities – proof generation, proof verification, and critique-conditioned proof repair – using a defense-in-depth generative verifier engineered for low false-positive rate. These capabilities are merged into a single released M3 model. At test time, MaxProof treats the model as a generator, verifier, refiner, and ranker, searches over a population of candidate proofs, and returns one final proof through tournament selection. With MaxProof test-time scaling, the M3 model reaches 35/42 on IMO 2025 and 36/42 on USAMO 2026, exceeding the human gold-medal threshold on both.

09.
arXiv (CS.AI) 2026-06-11

Intelligent Automation for Embodied Benchmark Construction: Pipelines, Embodiments, Simulators, and Trends

arXiv:2606.12207v1 Announce Type: cross Abstract: Embodied intelligence now spans navigation, household assistance, manipulation, autonomous driving, aerial agents, and multimodal large-model control. This expansion has made benchmark construction a central bottleneck for reliable evaluation. Unlike static datasets, embodied benchmarks combine task specifications, environments, robot data, demonstrations, annotations, metrics, evaluation scripts, and release policies into a single evaluation system. This survey reviews the literature through a five-stage construction pipeline: requirement and task construction, data acquisition, data cleaning and annotation, benchmark suite generation and metric definition, and evaluation execution with diagnostic feedback. For each stage, the survey analyzes the transition from manual curation to traditional automation, foundation-model assistance, and agentic closed-loop workflows. It also compares qualitative construction costs across human labor, data and asset acquisition, compute and simulation, validation and debugging, governance and maintenance, and rework risk. The main conclusion is that automation does not simply reduce benchmark cost. Instead, it often shifts cost toward validation, auditability, version control, and long-term governance. Progress in embodied evaluation will therefore depend not only on larger benchmark suites, but also on construction pipelines that are diagnosable, auditable, and responsibly refreshable.

10.
arXiv (CS.CV) 2026-06-16

FairGen: Preference-Aligned Diffusion for Demographically Equitable Medical Image Synthesis

Medical imaging is central to modern diagnostics, and artificial intelligence (AI) systems are increasingly used to support image-based analysis by improving efficiency, accuracy, and access to care. However, inequities in healthcare access and differential disease prevalence create severe demographic imbalances in clinical image data. Such imbalances are compounded by the fact that diseases can manifest with distinct features across demographic groups, rendering certain phenotypic presentations naturally rare. AI models trained on such imbalanced data risk perpetuating diagnostic bias and widening healthcare disparities. Here we introduce FairGen, a fairness-aware diffusion framework that synthesizes demographically balanced medical images while preserving pathology-relevant visual features. By embedding physician-aligned preferences into the generation process, FairGen improves subgroup coverage during synthesis and downstream classification. Applied to dermatology, radiology, and neuroimaging benchmark tasks, FairGen achieves fairness improvements of 95.9% for skin images, 80.0% for chest radiography, and 35.2% for brain MRI, while maintaining competitive diagnostic accuracy relative to models trained on original clinical data. Clinician-facing expert review and external validation on independent cohorts further support that these gains extend beyond standard fidelity metrics and are not confined to the original in-distribution datasets.

11.
arXiv (CS.CV) 2026-06-17

R1-SyntheticVL: Is Synthetic Data from Generative Models Ready for Multimodal Large Language Model?

In this work, we aim to develop effective data synthesis techniques that autonomously synthesize multimodal training data for enhancing MLLMs in solving complex real-world tasks. To this end, we propose Collective Adversarial Data Synthesis (CADS), a novel and general approach to synthesize high-quality, diverse and challenging multimodal data for MLLMs. The core idea of CADS is to leverage collective intelligence to ensure high-quality and diverse generation, while exploring adversarial learning to synthesize challenging samples for effectively driving model improvement. Specifically, CADS operates with two cyclic phases, i.e., Collective Adversarial Data Generation (CAD-Generate) and Collective Adversarial Data Judgment (CAD-Judge). CAD-Generate leverages collective knowledge to jointly generate new and diverse multimodal data, while CAD-Judge collaboratively assesses the quality of synthesized data. In addition, CADS introduces an Adversarial Context Optimization mechanism to optimize the generation context to encourage challenging and high-value data generation. With CADS, we construct MMSynthetic-20K and train our model R1-SyntheticVL, which demonstrates superior performance on various benchmarks.

12.
arXiv (CS.AI) 2026-06-12

Benchmarking AI Agents for Addressing Scientific Challenges Across Scales

arXiv:2606.12736v1 Announce Type: new Abstract: AI agents are increasingly being developed to accelerate scientific discovery, yet their practical capabilities in real research settings remain poorly understood. Existing benchmarks for AI agents rarely capture the complexity, heterogeneity, and extended reasoning required by scientific work, whereas benchmarks for scientific tasks often reduce research to static, direct problems and provide limited support for interactive evaluation. Here, we introduce SciAgentArena, a systematic benchmark for evaluating AI agents in real-world scientific research scenarios drawn from emerging needs across multiple domains. SciAgentArena comprises approximately 200 tasks with stepwise verification and an interactive, agent-agnostic environment for assessing diverse AI agents. Using this benchmark, we find that current agents can contribute effectively to well-specified data-analysis workflows, particularly when the task structure and evaluation criteria are clear. However, their performance remains uneven across scientific contexts: agents struggle to generate genuinely novel insights, sustain self-directed exploration, and formulate robust solutions for open-ended research questions. We further characterize common failure modes across agents and identify opportunities for improving their reliability, autonomy, and scientific reasoning. Together, SciAgentArena provides a practical framework for measuring progress in AI agents for science and for guiding the design of future agents capable of addressing complex scientific challenges. Full codes, tasks, and datasets can be accessed via this link: https://sciagentarena.github.io/.

13.
arXiv (CS.CL) 2026-06-15

MASLab: A Unified and Comprehensive Codebase for LLM-based Multi-Agent Systems

LLM-based multi-agent systems (MAS) have demonstrated significant potential in enhancing single LLMs to address complex and diverse tasks in practical applications. Despite considerable advancements, the field lacks a unified codebase that consolidates existing methods, resulting in redundant re-implementation efforts, unfair comparisons, and high entry barriers for researchers. To address these challenges, we introduce MASLab, a unified, comprehensive, and research-friendly codebase for LLM-based MAS. (1) MASLab integrates over 20 established methods across multiple domains, each rigorously validated by comparing step-by-step outputs with its official implementation. (2) MASLab provides a unified environment with various benchmarks for fair comparisons among methods, ensuring consistent inputs and standardized evaluation protocols. (3) MASLab implements methods within a shared streamlined structure, lowering the barriers for understanding and extension. Building on MASLab, we conduct extensive experiments covering 10+ benchmarks and 8 models, offering researchers a clear and comprehensive view of the current landscape of MAS methods. MASLab will continue to evolve, tracking the latest developments in the field, and invite contributions from the broader open-source community.

14.
arXiv (CS.CL) 2026-06-11

Agentic Environment Engineering for Large Language Models: A Survey of Environment Modeling, Synthesis, Evaluation, and Application

Environments serve as interactive systems for large language model (LLM) based agents across diverse scenarios and play a crucial role in driving the continual evolution of model capabilities. Despite this importance, existing work lacks a systematic categorization and deep analysis. This paper systematically studies current researches on agentic environments from the perspective of the environment engineering lifecycle, covering their modeling, synthesis, evaluation and application. Specifically, the paper first introduces representative environments from the perspectives of eight attributes and eight domains, providing detailed analyses of their development paths and highlighting their core capabilities. Second, for automated environment synthesis, two paradigms are introduced, such as symbolic synthesis and neural synthesis. This paper also shows different environment evaluation methods in each paradigm. Thirdly, the corresponding environment applications from the perspective of agent-environment co-evolution are discussed. In specific, the paper characterizes the primary pathways for agent evolution in dynamic environments from four complementary perspectives: memory-centric experience evolution, orchestration-centric workflow evolution, trajectory-centric offline evolution, and exploration-centric online evolution. And three paradigms of environment evolution are identified, namely neural-driven, difficulty-driven, and scaling-driven approaches. At last, several promising future directions are discussed, including Environment-as-a-Service, Multi-agent Environments, and Neural-Symbolic Environments.

15.
arXiv (CS.CL) 2026-06-19

PerceptionDLM: Parallel Region Perception with Multimodal Diffusion Language Models

Multimodal large language models (MLLMs) have achieved remarkable progress in visual understanding tasks. However, most existing MLLMs rely on autoregressive generation, which limits their efficiency for perception tasks that require captioning multiple regions. In this work, we propose PerceptionDLM, a multimodal diffusion language model optimized for efficient parallel region perception. Built upon PerceptionDLM-Base, a strong foundational baseline that achieves state-of-the-art performance among open-source diffusion MLLMs, our architecture fully leverages the parallel decoding nature of DLMs. Specifically, we introduce efficient prompting and structured attention masking to enable simultaneous perception of multiple masked regions, allowing the model to generate region descriptions in parallel at both the sequence and token levels. This design significantly improves inference efficiency compared with existing approaches that process regions sequentially. To systematically evaluate the parallelism property of visual perception capability for DLMs, we construct a new Parallel Detailed Localized Captioning Benchmark (ParaDLC-Bench) by scaling the DLC-Bench to include multiple region masks per image, enabling joint evaluation of both caption quality and inference efficiency. Experiments demonstrate that PerceptionDLM maintains competitive performance in region captioning while achieving substantial speed improvements for multi-region perception tasks. Our results highlight the potential of multimodal diffusion language models for efficient, parallel visual perception. To the best of our knowledge, we are the first to achieve parallel region caption and perception by leveraging the advantages of diffusion language models. Code, models, and datasets are released.

16.
arXiv (CS.CV) 2026-06-17

4DSloMo: 4D Reconstruction for High Speed Scene with Asynchronous Capture

Reconstructing fast-dynamic scenes from multi-view videos is crucial for high-speed motion analysis and realistic 4D reconstruction. However, the majority of 4D capture systems are limited to frame rates below 30 FPS (frames per second), and a direct 4D reconstruction of high-speed motion from low FPS input may lead to undesirable results. In this work, we propose a high-speed 4D capturing system only using low FPS cameras, through novel capturing and processing modules. On the capturing side, we propose an asynchronous capture scheme that increases the effective frame rate by staggering the start times of cameras. By grouping cameras and leveraging a base frame rate of 25 FPS, our method achieves an equivalent frame rate of 100-200 FPS without requiring specialized high-speed cameras. On processing side, we also propose a novel generative model to fix artifacts caused by 4D sparse-view reconstruction, as asynchrony reduces the number of viewpoints at each timestamp. Specifically, we propose to train a video-diffusion-based artifact-fix model for sparse 4D reconstruction, which refines missing details, maintains temporal consistency, and improves overall reconstruction quality. Experimental results demonstrate that our method significantly enhances high-speed 4D reconstruction compared to synchronous capture.

17.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

18.
arXiv (CS.CL) 2026-06-16

Progressive Knowledge-Guided Large Language Model Framework for Bearing Fault Diagnosis

Vibration-based bearing fault diagnosis requires resolving three interrelated measurement challenges, including the trade-off between global statistical feature efficiency and local transient signal fidelity, insufficient traceability of measurement features to underlying fault physics, and ineffective multi-source measurement information fusion across diagnostic scales. This paper presents a progressive physics-guided multi-scale vibration signal processing framework that addresses all three challenges within a unified diagnostic pipeline. An 81-dimensional measurement descriptor, derived from bearing kinematic theory and characteristic defect frequencies, establishes a physically traceable feature space enabling real-time fault screening at approximately 20 ms per sample. A fault-adaptive signal segmentation mechanism then directs analytical attention toward fault-relevant waveform regions guided by physics-based priors, without manual feature engineering. Structured fault mechanism knowledge is further encoded implicitly in model parameters during training, enabling autonomous multi-scale measurement fusion without external knowledge dependencies at inference. Validated on four public benchmark datasets under diverse operating conditions, the framework achieves 98.49% diagnostic accuracy with a 12.6-fold reduction in computational cost relative to signal-level baselines. Interpretability analysis confirms that diagnostic feature activations align with established bearing fault mechanics, supporting measurement traceability in safety-critical industrial systems.

19.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

20.
arXiv (CS.CL) 2026-06-16

CHILLGuard: Towards Fine-Grained Chinese LLM Safety Guardrail with Scalable Data Construction and Model-aware Preference Alignment

Malicious content generated from large language models (LLMs) could pose severe safety risks and ethical concerns. While existing LLM safety guardrails excel in English or multilingual settings, they lack adaptation to Chinese-specific regulatory policies, cultural context and linguistic nuances, failing to support fine-grained risk classification for diverse deployment needs. In this paper, we introduce a 5-macro, 31-micro category fine-grained risk taxonomy for Chinese scenarios, and build CHILLGuard: a dedicated Chinese LLM content safety guardrail. To address the critical scarcity of high-quality annotated Chinese safety data, we propose a scalable multi-stage data construction pipeline: we expand multi-source corpus via retrieval-augmented generation, generate implicit harmful samples through prompt engineering rewriting, and refine high-quality data via multi-model voting-based label calibration. Based on this, we build CHILLGuardTrain, a large-scale training set with 405,007 samples, and CHILLGuardTest, a rigorously curated annotated test set with 51,745 samples. We then train CHILLGuard on CHILLGuardTrain under a generator-classifier collaborative framework via Model-aware Direct Preference Optimization. Extensive experiments under multiple settings demonstrate the state-of-the-art performance of CHILLGuard, e.g., a 15.92% improvement of F1 score over Qwen3Guard-8B-Strict on our benchmark. We will release our resources at https://github.com/cswbyu/CHILLGuard.

21.
arXiv (CS.CV) 2026-06-16

OmniOPSD: Rationale-Privileged On-Policy Self-Distillation for Affective Computing

Reinforcement learning for multimodal large language models (MLLMs) is often hindered by severe reward sparsity in complex reasoning tasks. This challenge is particularly pronounced in human-centered scenarios involving states, emotions, intentions, and behaviors, where heterogeneous multimodal signals and subjective human factors make high-quality chain-of-thought (CoT) annotations expensive and difficult to obtain. Although many multimodal datasets provide expert-annotated ground-truth labels, directly using these labels for supervised fine-tuning may encourage shortcut learning in multimodal perception and provides limited transparency for safety-critical human–AI interaction. To address these limitations, we propose OmniOPSD, a Rationale-Privileged On-Policy Self-Distillation framework that uses frontier-generated rationales as teacher-side privileged evidence rather than student imitation targets. OmniOPSD uses frontier-generated evidence-aware rationales only as training-time privileged evidence context for a local teacher. The student samples its own rollout from the original multimodal input, while the rationale-privileged teacher scores the same tokens and provides dense token-level supervision. Thus, the student learns on its own trajectory distribution without directly imitating frontier-model completions, and inference requires no labels, rationales, CoT annotations, or closed-source model access. Experiments on MER-UniBench show that OmniOPSD achieves state-of-the-art performance with an average score of $84.19$, and ablations further support the value of rationale-privileged teacher guidance.

22.
arXiv (CS.CV) 2026-06-19

Cinematic Compositing Using Character-Environment-Harmonized Video Generation Models

Cinematic compositing aims to integrate green-screen characters into novel environments while maintaining physical and photometric realism. Previous methods often fail to capture the complex bidirectional interactions between characters and their surroundings, which we characterize as Character-to-Environment (C2E) physical interaction and Environment-to-Character (E2C) lighting harmonization. To address this, we propose an end-to-end video diffusion framework that jointly models C2E and E2C interactions, specifically handling the challenges of interactive props. Our approach introduces a tri-mask-guided architecture with RGB-D joint denoising to ensure physically consistent interactions among the character, props, and environment. We further develop an efficient prior-driven data curation pipeline to construct high-quality relighting pairs without expensive rendering. Finally, a reference-conditioned mechanism enables controllable environment synthesis and precise prop replacement. Extensive experiments demonstrate that our framework significantly outperforms existing methods in cinematic-quality dynamic video compositing.

23.
arXiv (CS.AI) 2026-06-11

Workflow-GYM: Towards Long-Horizon Evaluation of Computer-use Agentic tasks in Real-World Professional Fields

arXiv:2606.11042v2 Announce Type: replace Abstract: Recent years have witnessed the rapid evolution of AI agents toward handling increasingly complex, real-world tasks. However, existing benchmarks rarely evaluate whether agents can operate graphical user interfaces to complete long-horizon, high-value professional workflows across diverse domains. Current GUI benchmarks still predominantly focus on general-purpose software, relatively simple applications, and short-horizon tasks, leaving it largely unknown whether modern agents can follow user instructions to autonomously operate domain-specific professional software and accomplish economically valuable work in an end-to-end manner. To bridge this gap, we introduce Workflow-GYM, a benchmark for long-horizon GUI tasks centered on professional domains and specialized software environments. Through extensive experiments on state-of-the-art models, we find that even the strongest models achieve only slightly above 30% success rates, highlighting that professional long-horizon GUI workflows remain highly challenging for current GUI agents. Further analysis reveals that current agents struggle to maintain long-horizon workflow consistency, frequently exhibiting workflow stage omission, error propagation, objective drift, and insufficient understanding of professional software environments. Our findings provide important insights into the limitations of current agent systems and suggest key directions for the next generation of GUI-agent research.

24.
arXiv (CS.LG) 2026-06-16

Best Arm Identification with Minimal Regret

arXiv:2409.18909v2 Announce Type: replace Abstract: Motivated by real-world applications that necessitate responsible experimentation, we introduce the problem of best arm identification (BAI) with minimal regret. This variant of the multi-armed bandit problem elegantly amalgamates two of its most ubiquitous objectives: regret minimization and BAI. More precisely, the agent's goal is to identify the best arm with a prescribed confidence level $\delta$, while minimizing the cumulative regret up to the stopping time. Focusing on single-parameter exponential families of distributions, we leverage information-theoretic techniques to establish an instance-dependent lower bound on the expected cumulative regret. Moreover, we present an impossibility result that underscores the tension between cumulative regret and sample complexity in fixed-confidence BAI. Complementarily, we design and analyze the Double KL-UCB algorithm, which achieves asymptotic optimality as the confidence level tends to zero. Notably, this algorithm employs two distinct confidence bounds to guide arm selection in a randomized manner. Our findings elucidate a fresh perspective on the inherent connections between regret minimization and BAI.

25.
arXiv (CS.AI) 2026-06-18

ThinkDeception: A Progressive Reinforcement Learning Framework for Interpretable Multimodal Deception Detection

arXiv:2606.18988v1 Announce Type: new Abstract: Multimodal deception detection is critical for identifying fraudulent intentions, yet existing approaches predominantly rely on end to end black–box paradigms. These methods suffer from a severe lack of interpretability failing to provide transparent reasoning trajectories and struggling to explicitly capture the subtle, cross modal inconsistencies inherent in deceptive behaviors. To transcend these limitations, we propose ThinkDeception, a novel and interpretable multimodal deception detection framework. As a pioneering effort, it introduces Multimodal Large Language Models (MLLMs) into this domain, transforming deception detection from a traditional binary classification task into an explicit cognitive reasoning process. Facilitated by the first meticulously annotated step–by–step multimodal Chain of Thought (CoT) dataset, we develop a foundational model, ThinkDeception Base, empirically validating the critical role of modal inconsistency in decoding deception. Building upon this foundation, our core innovation lies in proposing Visual-Audio Consistency Group Relative Policy Optimization(VAC–GRPO) equipped with a progressive training strategy. Distinct from standard GRPO, we stratify the training data into four progressive difficulty tiers, guiding the model through a psychologically grounded easy–to–hard cognitive transition. By innovatively coupling this dynamic curriculum scheduler with a multi dimensional, process aware reward mechanism and a reflective learning paradigm, we significantly elevate the model's overall reasoning quality. Extensive experiments on mainstream benchmarks demonstrate that ThinkDeception establishes a new SOTA, significantly outperforming existing methods in both detection accuracy and rationale quality. Ultimately, this work successfully drives the field of deception detection toward interpretable, multimodal cognitive reasoning.