×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Tao Yang ×
Shuffle
01.
arXiv (CS.AI) 2026-06-12

TimeROME-DLM: Temporal Causal Tracing and Low-Rank Inference-Time Knowledge Editing for Masked Diffusion Language Models

arXiv:2606.12841v1 Announce Type: cross Abstract: Masked diffusion language models (MDLMs) such as LLaDA now rival autoregressive (AR) LLMs, but every existing knowledge-editing and unlearning method (ROME, MEMIT, etc.) targets AR transformers and either makes assumptions that fail under iterative denoising, or requires gradient updates whose backward-pass activations cost tens of GB of extra VRAM and which collapse MDLMs at standard learning rates. We introduce TimeROME-DLM, the first training-free, gradient-free, inference-time knowledge-editing framework for MDLMs. It couples two components: a Temporal Indirect Effect (TIE) causal-tracing protocol that identifies, for each fact, the coordinate whose intervention most strongly drives the object prediction at later denoising steps; and a closed-form, low-rank residual edit memory that aggregates subject keys and target deltas across all forget facts and applies a single ridge-regularised update at that coordinate at every diffusion forward, with sparsification to limit utility spillover. Backbone weights stay frozen; only three hyperparameters (alpha, lambda, q) are tuned on a small validation split. On TOFU forget01 with TOFU-finetuned LLaDA-8B-Base, TimeROME-DLM cuts forget-set log-probability by roughly 83 nats. The same configuration transfers to LLaDA-8B-Instruct, Dream-7B, MMaDA-8B, DiffuLLaMA-7B, and LLaDA-MoE-1.4B. It keeps retain-set log-probability nearly flat (within ~1 nat at the utility-safe operating point) across 50 sequentially inserted facts, delivers a four- to fourteen-fold wall-clock speedup with zero additional VRAM over the strongest converged training-time baseline, and scales sub-linearly to 400 facts. TimeROME-DLM closes the locate-then-edit gap between AR LLMs and MDLMs at a fraction of the computational cost.

02.
arXiv (CS.CL) 2026-06-11

Toward Generalist Autonomous Research via Hypothesis-Tree Refinement

Scientific progress depends on a repeated loop of exploration, experimentation, and abstraction. Researchers test candidate directions, interpret the evidence, and carry the resulting lessons into later attempts. We study how an AI agent can run this loop autonomously over long horizons. We introduce Arbor, a general framework for autonomous research that combines a long-lived coordinator, short-lived executors, and Hypothesis Tree Refinement (HTR), a persistent tree that links hypotheses, artifacts, evidence, and distilled insights across time. The coordinator manages global research strategy over the tree, while executors implement and test individual hypotheses in isolated worktrees. As results return, Arbor updates the tree, propagates reusable lessons, refines the search frontier, and admits verified improvements. This design turns autonomous research from a sequence of local attempts into a cumulative process in which strategy, execution, and evidence are carried across time. We evaluate Arbor under Autonomous Optimization (AO), an operational setting where an agent improves an initial research artifact through iterative experimentation without step-level human supervision. Across six real research tasks in model training, harness engineering, and data synthesis, Arbor achieves the best held-out result on all six tasks, attaining more than 2.5x the average relative held-out gain of Codex and Claude Code under the same task interface and resource budget. On MLE-Bench Lite, Arbor reaches 86.36% Any Medal with GPT-5.5, the strongest result in our comparison.

03.
arXiv (CS.AI) 2026-06-11

Lung-R1: A Knowledge Graph-Guided LLM for Pulmonary Diagnostic Reasoning

arXiv:2606.11675v1 Announce Type: new Abstract: Diagnosing pulmonary diseases requires integrating heterogeneous evidence amid phenotypic variability and cross-disease overlap. Although large language models (LLMs) have shown progress on pulmonary knowledge question answering (QA) and information-processing tasks, reliable pulmonary diagnosis requires patient-specific, relation-aware reasoning over electronic medical record (EMR) evidence rather than isolated knowledge recall. We define this gap between pulmonary knowledge and case-level diagnostic reasoning as the Pulmonary Knowledge-to-Diagnosis Gap. To address it, we introduce LungKG, the first structured pulmonary knowledge graph for diagnostic knowledge organization and record-grounded reasoning. LungKG contains 59,038 nodes and 164,308 edges across 15 entity types and 112 relation types, serving as both a reusable pulmonary knowledge resource and the foundation for LungKG-guided model adaptation. Built on LungKG, we propose Lung-R1, a LungKG-guided pulmonary LLM trained through KG-constrained reasoning-chain construction and KG-guided reinforcement learning. In a 20-system evaluation, Lung-R1-14B achieves state-of-the-art performance across Choice, Pulmonary-QA, and EMR Diagnosis, reaching an EMR Diagnosis score of 4.3583 and surpassing the strongest non-Lung-R1 baseline by 0.1476 points. These results demonstrate the value of LungKG-guided training for EMR-based pulmonary diagnosis.

04.
arXiv (CS.AI) 2026-06-19

SPOT-E: Test-Time Entropy Shaping with Visual Spotlights for Frozen VLMs

arXiv:2606.20244v1 Announce Type: cross Abstract: Vision-language models (VLMs) often underperform on evidence intensive tasks because decisive visual evidence are small, localized, and easy to overlook, leading to failures in evidence readout even when high-level reasoning is intact. Prior inference-time visual interventions can improve grounding without retraining, but they are largely open-loop and lack a mechanism to verify whether highlighted evidence is actually used. We study answer-span prediction entropy as a model-internal feedback signal and show that naive entropy minimization is ambiguous, since low entropy may arise from evidence-grounded confidence or shortcut collapse. To resolve this ambiguity, we introduce low-entropy anchors and an entropy-shaping objective that reduces answer uncertainty while preserving baseline high-confidence tokens. We instantiate this principle in SPOT-E, a plug-and-play test-time method that produces question-conditioned spotlights, optimized per instance via light-weight tuning based on Group Relative Policy Optimization (GRPO). Across all benchmarks and different VLM families, SPOT-E yields consistent gains and improved robustness under visual corruptions. Code is publicly available at: \url{https://github.com/YinBo0927/SPOT-E}

05.
arXiv (CS.CL) 2026-06-16

Less is More: Improving LLM Reasoning with Minimal Test-Time Intervention

Recent progress in large language models (LLMs) has focused on test-time scaling to improve reasoning via increased inference computation, but often at the cost of efficiency. We revisit test-time behavior and uncover a simple yet underexplored phenomenon: reasoning uncertainty is highly localized-only a small subset of high-entropy tokens dominantly affects output correctness. Motivated by this, we propose Minimal Test-Time Intervention (MTI), a training-free framework that enhances reasoning accuracy and stability with minimal overhead. MTI includes: (i) Selective CFG intervention, applying classifier-free guidance only at uncertain positions; and (ii) Lightweight negative-prompt guidance, reusing the main model's KV cache to approximate unconditional decoding efficiently. MTI yields consistent gains across general, coding, and STEM tasks-e.g., +9.28% average improvement on six benchmarks for DeepSeek-R1-7B and +11.25% on AIME2024 using Ling-mini-2.0-while remaining highly efficient.

06.
arXiv (CS.CV) 2026-06-16

AVA-VLA: Improving Vision-Language-Action models with Active Visual Attention

Vision-Language-Action (VLA) models have shown remarkable progress in embodied tasks recently, but most methods process visual observations independently at each timestep. This history-agnostic design treats robot manipulation as a Markov Decision Process, even though real-world robotic control is inherently partially observable and requires reasoning over past interactions. To address this mismatch, we reformulate VLA policy learning from a Partially Observable Markov Decision Process perspective and propose AVA-VLA, a framework that conditions action generation on a recurrent state that serves as a neural approximation to the agent's belief over task history. Built on this recurrent state, we introduce Active Visual Attention (AVA), which dynamically reweights visual tokens in the current observation to focus on regions most relevant given both the instruction and execution history. Extensive experiments show that AVA-VLA achieves state-of-the-art performance on standard robotic benchmarks, including LIBERO and CALVIN, and transfers effectively to real-world dual-arm manipulation tasks. These results demonstrate the effectiveness of temporally grounded active visual processing for improving VLA performance in robotic sequential decision-making. The project page is available at https://liauto-dsr.github.io/AVA-VLA-Page.

07.
arXiv (CS.CL) 2026-06-11

FORT-Searcher: Synthesizing Shortcut-Resistant Search Tasks for Training Deep Search Agents

Training deep search agents requires verifiable questions whose answers remain unavailable until sufficient evidence has been acquired through search. Existing synthesis methods often increase apparent difficulty by enriching graph structures, but structural complexity alone does not guarantee realized search difficulty: the intended search process can collapse through a cheaper identifying route. We formalize this gap with a shortcut-aware difficulty framework and identify four actionable shortcut risks: evidence co-coverage, single-clue selectivity, exposed constants, and prior-knowledge binding. To diagnose their realized effects, we use trajectory signatures including solving cost, answer hit time, and prior-shortcut rate. Guided by this framework, we introduce FORT, a Framework of Shortcut-Resistant Training-Data Synthesis. FORT constructs shortcut-resistant training data by controlling shortcut risks across entity selection, evidence graph construction, question formulation, and adversarial refinement. Experiments show that FORT induces longer pre-answer search and fewer shortcut patterns than existing open-source deep search datasets. Using the resulting trajectories, we train FORT-Searcher with supervised fine-tuning (SFT) only, and it achieves the best overall performance among comparable-size open-source search agents on challenging deep search benchmarks. Relevant resources will be made available at https://github.com/RUCAIBox/FORT-Searcher.

08.
arXiv (CS.CV) 2026-06-15

Hierarchical Consistency Learning for Test-time Adaptation in Camouflage Perception

Camouflaged object detection (COD) aims to localize targets that exhibit minimal perceptual differences from backgrounds through physical attributes. Existing methods, constrained by the static train-then-freeze paradigm, suffer from domain rigidity and annotation dependency, limiting their adaptability to scene variations and unseen camouflage patterns. To overcome these, we propose the hierarchical consistency learning (HCL) framework, which integrates test-time adaptation for dynamic representation recalibration. Specifically, we design the hierarchical representation reconstruction (HRR) to alleviate feature entanglement by synergizing spatial reconstruction with dual-stream frequency-domain decomposition, enhancing robustness against appearance homogenization. The pixel and spectrum inference provide structural and contextual priors. We further introduce task affinity guidance (TAG) to propagate knowledge across branches via channel-wise affinity, aligning local discriminative cues and mitigating semantic drift. To ensure semantic invariance, we formulate the prototype consistency calibration (PCC), which aggregates region features into compact prototypes and establishes prototype-feature similarity. This imposes implicit and hierarchical constraints that bridge task and representation gaps. Extensive experiments across four camouflaged and four underwater object benchmarks, under three degradation settings, demonstrate that our method consistently outperforms state-of-the-art approaches, highlighting its robustness and generalization under distribution shifts.

09.
arXiv (CS.LG) 2026-06-17

RadSEM: A Finding-by-Finding Metric for Clinical Consistency in Radiology Reports

arXiv:2606.17062v1 Announce Type: cross Abstract: Radiology report evaluation must distinguish clinical compatibility from surface similarity, because negation, laterality, or normal-abnormal polarity can reverse a finding. We propose RadSEM (Radiology Sentence-Level Evaluation Metric), a constrained LLM-assisted metric for reference-based evaluation of radiology Findings. RadSEM rewrites reference and generated reports into ordered atomic finding sentences, each expressing one site-finding proposition. It then performs contradiction-constrained many-to-many matching: incompatible pairs such as "effusion" and "no effusion" receive no credit, while compatible granularity differences can receive partial credit. A deterministic stage weights pairs by part-whole and abnormal-detail relationships, counts unmatched findings, and produces an abnormal-focused weighted F1 score. Thus, the LLM supports structured rewriting and local alignment rather than acting as an opaque judge. We evaluate RadSEM with SSREE, a controlled monotonicity stress test built from 2,448 de-identified reports expanded into five graded corruption levels. RadSEM achieves Kendall tau_b of 0.957, all-pairs concordance of 97.8%, adjacent concordance of 95.0%, and strict five-level ordering for 81.9% of reports, outperforming radiology-specific and general text metrics while avoiding the failure in which polarity-inverted reports regain lexical overlap. On the same SSREE set, RadSEM outperforms the Ref-anchored RadSEM-Alt policy, improving adjacent concordance from 90.7% to 95.0% and strict ordering from 67.2% to 81.9%. On a 599-triplet synonym/antonym subset, RadSEM prefers synonyms in 597 cases (99.67%). These results suggest that explicit finding units, contradiction-aware matching, and abnormal-focused deterministic scoring make report scoring more interpretable and sensitive to clinically meaningful errors. Code is available at https://github.com/jdh-algo/RadSEM.

10.
arXiv (CS.CV) 2026-06-15

A Pragmatic VLA Foundation Model

Offering great potential in robotic manipulation, a capable Vision-Language-Action (VLA) foundation model is expected to faithfully generalize across tasks and platforms while ensuring cost efficiency (e.g., data and GPU hours required for adaptation). To this end, we develop LingBot-VLA with around 20,000 hours of real-world data from 9 popular dual-arm robot configurations. Through a systematic assessment on 3 robotic platforms, each completing 100 tasks with 130 post-training episodes per task, our model achieves clear superiority over competitors, showcasing its strong performance and broad generalizability. We have also built an efficient codebase, which delivers a throughput of 261 samples per second with an 8-GPU training setup, representing a 1.5~2.8$\times$ (depending on the relied VLM base model) speedup over existing VLA-oriented codebases. The above features ensure that our model is well-suited for real-world deployment. To advance the field of robot learning, we provide open access to the code, base model, and benchmark data, with a focus on enabling more challenging tasks and promoting sound evaluation standards.

11.
arXiv (CS.CL) 2026-06-16

Evaluating the Robustness of Proof Autoformalization in Lean 4

Proof autoformalization aims to translate a mathematical informal proof written in natural language into a formal proof in a formal language such as Lean~4. Several works have developed LLM-based models for proof autoformalization. However, existing evaluations have typically focused on translating well-formed informal proofs from curated datasets. We argue that a robust proof autoformalizer must remain faithful even for informal proofs that diverge from these idealized ones, and we present the first study on the robustness of proof autoformalization models. We formulate two categories of perturbations and evaluate robustness under each: a global perturbation paraphrases the informal proof in a different style, under which the formalization should remain consistent; a local perturbation alters a value, symbol, or proof step, possibly in a counterfactual way, and a robust formalization should faithfully reflect the perturbation rather than reverting to the original one or inferring a different one on its own. We build a benchmark with both perturbations on miniF2F and MATH-500, and automatically measure how stable a proof autoformalization's correctness is under global perturbations and how faithfully its output reflects local perturbations. We evaluate seven recent models, all of which are sensitive to global perturbations and mostly fail to remain faithful under local perturbations. Code and data are available via https://github.com/ucr-rai/robust-proof-autoformalization.

12.
arXiv (quant-ph) 2026-06-16

3D Ising criticality with Platonic lattice superconducting qubits

arXiv:2606.16854v1 Announce Type: new Abstract: The three-dimensional (3D) Ising model is a foundational model in statistical physics and critical phenomena, yet its analytical intractability has long impeded the precise determination of universal critical exponents. While high-precision estimates have been obtained through classical numerical methods and conformal bootstrap techniques, a direct quantum simulation of the 3D Ising criticality remains challenging, requiring nontrivial connectivity, sufficient system size, and high spectral resolution. In this work, assisted by the state-operator correspondence of conformal field theory, we perform a digital quantum simulation of the 3D Ising critical exponents using a multiply-connected 9-qubit superconducting quantum processor with a Platonic lattice geometry. Employing an extended variational quantum eigensolver equipped with a phase-based loss function, we variationally prepare the low-energy eigenstates of the transverse-field Ising model on a cubic Platonic lattice encoded in an 8-qubit register. The four lowest eigenenergies are extracted via Fourier-transform analysis and high-precision numerical fitting, agreeing with the exact diagonalization values up to +/- 0.001. The resulting scaling dimension Delta_epsilon = 1.5850 and critical exponent nu = 0.7067 match well with theory.

13.
arXiv (CS.CV) 2026-06-11

DrivingAgent: Design and Scheduling Agents for Autonomous Driving Systems

Many autonomous driving systems are increasingly incorporating foundation models to improve generalization and handle long-tail scenarios. However, this trend introduces two key challenges: (i) the manual and labor-intensive process of designing and integrating new models, and (ii) the lack of intelligent, dynamic scheduling mechanisms to meet strict real-time constraints. While Large Language Model (LLM)-based agents offer a promising avenue for automation, existing frameworks are ill-suited for autonomous driving. Specifically, they fail to distinguish between the fundamentally different requirements of system design and real-time scheduling, treat modules as opaque black boxes, and are not designed for continuous operation. To address these limitations, we propose DrivingAgent, a novel agent framework tailored to the dual challenges of autonomous driving system design and scheduling. In the design phase, DrivingAgent automates module development by interpreting system architecture, generating code, and validating modules via super-network training. In the scheduling phase, it employs a lightweight LLM trained with reinforcement learning to dynamically orchestrate system modules in real time, supported by a structured memory that integrates long-term storage with timestamped short-term context. Experimental results demonstrate that DrivingAgent achieves a superior speed–accuracy trade-off on both the nuScenes and Bench2Drive benchmarks.

14.
arXiv (CS.CL) 2026-06-12

Agents' Last Exam

Recent AI systems have achieved strong results on a wide range of benchmarks, yet these gains have not translated into economically meaningful deployment across many professional domains. We argue that this gap is largely an evaluation problem: widely used benchmarks lack sustained performance measurement on real and economically valuable workflows. This paper introduces Agents' Last Exam (ALE), a benchmark designed to evaluate AI agents on long horizon, economically valuable, real world tasks with verifiable outcomes. Developed in collaboration with 250+ industry experts, ALE covers non-physical industries defined with reference to O*NET / SOC 2018 (the U.S. federal occupational taxonomy). It is organized around a task taxonomy with 55 sub fields grouped into 13 industry clusters covering 1K+ tasks. Current results show that the hardest tier remains far from saturated: across mainstream harness and backbone configurations, the average full pass rate is below 1%. ALE is designed as a living benchmark: its task pool grows continuously as new workflows and industries are onboarded. More broadly, ALE is intended not merely as another leaderboard, but as an instrument for closing the gap between benchmark success and GDP relevant impact.

15.
arXiv (CS.CV) 2026-06-12

PaLMR: Towards Faithful Visual Reasoning via Multimodal Process Alignment

Reinforcement learning has recently improved the reasoning ability of Large Language Models and Multimodal LLMs, yet prevailing reward designs emphasise final-answer correctness and consequently tolerate process hallucinations–cases where models reach the right answer while misperceiving visual evidence. We address this process-level misalignment with PaLMR, a framework that aligns not only outcomes but also the reasoning process itself. PaLMR comprises two complementary components: a perception-aligned data layer that constructs process-aware reasoning data with structured pseudo-ground-truths and verifiable visual facts, and a process-aligned optimisation layer that constructs a hierarchical reward fusion scheme with a process-aware scoring function to encourage visually faithful chains-of-thought and improve training stability. Experiments on Qwen2.5-VL-7B show that our approach substantially reduces reasoning hallucinations and improves visual reasoning fidelity, achieving state-of-the-art results on HallusionBench while maintaining strong performance on MMMU, MathVista, and MathVerse. These findings indicate that PaLMR offers a principled and practical route to process-aligned multimodal reasoning, advancing the reliability and interpretability of MLLMs.

16.
arXiv (CS.AI) 2026-06-16

Co-Scraper: query-aware DOM Pruning and Reusable Scraper Synthesis for Lightweight Web Data Extraction

arXiv:2606.14821v1 Announce Type: cross Abstract: The abundant and heterogeneous nature of web content necessitates automated information extraction, and generating scrapers that can be reused across similar web pages offers an effective solution for scalable data extraction. In this work, we propose Co-Scraper, a two-stage framework capable of handling the hierarchical complexity of long HTML documents. By integrating a query-aware DOM pruning mechanism with stable extraction strategy induction, Co-Scraper can effectively transforms web content into executable programmatic wrappers using a fine-tuned Qwen3-8B model. On the test set of SWDE, Co-Scraper achieves state-of-the-art performance with an F1 score of 94.78% and a reuse success rate of 90.39%. This framework significantly enhances the accuracy and resilience of data extraction, providing a highly efficient approach for web data acquisition tasks.

17.
arXiv (CS.AI) 2026-06-16

FOUNDv2: Learning Unified User Quantized Tokenizers for User Representation

arXiv:2508.00956v3 Announce Type: replace-cross Abstract: User representation learning serves as a fundamental pillar for personalized services on large-scale web platforms. Despite its importance, conventional continuous embedding methods face significant challenges, including the lack of a unified paradigm for multi-source data integration, prohibitive storage overhead due to low information density, and the lack of multi-scale modeling granularity. To overcome these limitations, we introduce FOUNDv2, a comprehensive user representation scheme centered on the Unified User Quantized Tokenizer U2QT) framework. FOUNDv2 transforms heterogeneous user data into a standardized discrete token space through a robust two-stage architecture. Specifically, the framework first extracts compact feature representations and subsequently employs a multi-view RQ-VAE to discretize them into storage-efficient tokens using shared and source-specific codebooks. To empower these representations with predictive intelligence, we further design multi-scale alignment objectives to capture both fine-grained behavioral dependencies and macro-temporal periodicity. Extensive experiments on various benchmarks demonstrate that FOUNDv2 consistently outperforms task-specific baselines while achieving substantial reductions in storage and computational costs. Finally, the large-scale deployment of FOUNDv2 on Alipay validates its practical scalability and efficiency across diverse industrial scenarios. The main code is available at: https://github.com/chuanhe1999/FOUNDv2.

18.
arXiv (CS.CV) 2026-06-19

SurgVista: Long-Horizon Surgical World Modeling with Plausible Instrument-Tissue Dynamics

Scaling robot policy learning for autonomous surgery is challenging, as expert demonstrations are expensive and in vivo exploration poses substantial safety risks. Surgical world models address this by generating realistic, action-conditioned future frames from an initial observation, but existing methods exhibit two persistent failure modes: spatial interaction incoherence, where visible instrument contact fails to induce spatially consistent tissue deformation, and temporal fidelity collapse, where prediction errors compound across autoregressive rollouts and progressively corrupt visual quality. We present SurgVista, a surgical world model that mitigates both failures through two training recipes. Deformation Consistency Regularization extracts scene-point trajectories from training videos and enforces cross-frame coherence through latent contrastive learning, strengthening physically consistent instrument-tissue dynamics. Drift Adaptation Training mitigates long-horizon drift by perturbing conditioning frames with online prediction residuals and photometric augmentations calibrated to long-horizon drift statistics, sustaining visual fidelity over extended rollouts. To enable rigorous evaluation, we further introduce SurgWorld-Bench, featuring diverse procedure types, long-range rollouts, and decoupled metrics for instrument-motion accuracy and tissue-response fidelity. Extensive experiments show that SurgVista consistently outperforms state-of-the-art methods across visual quality, temporal consistency, and interaction fidelity, with gains widening as the prediction horizon grows.

19.
arXiv (CS.CL) 2026-06-17

Atlas: Orchestrating Heterogeneous Models and Tools for Multi-Domain Complex Reasoning

The integration of large language models (LLMs) with external tools has significantly expanded the capabilities of AI agents. However, as the diversity of both LLMs and tools increases, selecting the optimal model-tool combination becomes a high-dimensional optimization challenge. Existing approaches often rely on a single model or fixed tool-calling logic, failing to exploit the performance variations across heterogeneous model-tool pairs. In this paper, we present ATLAS (Adaptive Tool-LLM Alignment and Synergistic Invocation), a dual-path framework for dynamic tool usage in cross-domain complex reasoning. ATLAS operates via a dual-path approach: (1) training-free cluster-based routing that exploits empirical priors for domain-specific alignment, and (2) RL-based multi-step routing that explores autonomous trajectories for out-of-distribution generalization. Extensive experiments across 15 benchmarks demonstrate that our method outperforms closed-source models like GPT-4o, surpassing existing routing methods on both in-distribution (+10.1%) and out-of-distribution (+13.1%) tasks. Furthermore, our framework shows significant gains in visual reasoning by orchestrating specialized multi-modal tools.

20.
arXiv (CS.CV) 2026-06-12

ComAct: Reframing Professional Software Manipulation via COM-as-Action Paradigm

Existing computer-use agents remain fundamentally limited in professional software manipulation: GUI-based agents suffer from fragile visual grounding and long-horizon error accumulation, while API-basedapproaches struggle with heterogeneous protocols and inaccessible commercial interfaces. In this work,we identify the Component Object Model (COM) as a unified executable abstraction, proposing COM-as-Action: a new paradigm that reframes professional software interaction as deterministic program synthesisrather than sequential visual control. To validate this paradigm in the most demanding environments, weintroduce ComCADBench, the first benchmark for agents operating real industrial CAD software. Ourexperiments reveal a substantial paradigm gap: frontier proprietary models achieve near-zero successunder GUI-based interaction, whereas COM-based execution yields substantial immediate gains. Tobridge the remaining gap between syntactic correctness and geometric accuracy, we develop ComActor, aself-correcting agent trained through a progressive three-stage framework, alongside ComForge, a scalableplatform for large-scale training in Windows containers. Extensive experiments show that ComActorachieves state-of-the-art performance on ComCADBench, with strong resilience in long-horizon taskswhere baselines collapse, and generalizes to external CAD benchmark.

21.
arXiv (CS.CV) 2026-06-15

LiAuto-GeoX: Efficient Grounded Driving Transformer

Dense 3D reconstruction has demonstrated immense potential for spatial understanding, yet its viability as a real-time, onboard representation for autonomous driving remains an open challenge. Existing large-scale visual geometry models typically require substantial computational resources and lack the long-range geometric fidelity, surround-view consistency, and real-time efficiency demanded by dynamic driving environments. To bridge this gap, we present LiAuto-GeoX, an efficient grounded driving transformer designed for deployable, ego-centric 3D scene understanding. Our approach begins by learning a high-capacity driving geometry model from large-scale surround-view data, utilizing sparse LiDAR priors to provide robust geometric grounding in distant, ambiguous, or structure-sparse regions. We then instantiate this capability into a highly compact 155M-parameter onboard model through a novel geometry-preserving distillation framework. This framework employs mask-guided depth-aware distillation to retain fine-grained metric structures by emphasizing geometrically informative regions, and relative-pose relational distillation to enforce cross-view spatial consistency through pose-induced geometric relations. Extensive evaluations reveal that LiAuto-GeoX runs at 220 FPS on KITTI while maintaining high-fidelity dense reconstruction, enabling real-time deployment. The learned geometry transfers seamlessly to downstream autonomy tasks, achieving 90.6 PDMS in trajectory prediction, 24.63 mIoU in occupancy prediction, and 47.67 IoU in future-frame prediction. These all demonstrate that efficient dense 3D reconstruction can transcend its traditional role as a perception target to serve as a scalable, foundational geometric representation for next-generation autonomous driving.

22.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

23.
arXiv (CS.CV) 2026-06-11

UI2Code^N: UI-to-Code Generation as Interactive Visual Optimization

UI-to-code aims to translate UI screenshots into executable front-end code. Despite progress with vision-language models (VLMs), most existing methods formulate UI-to-code as a single-pass generation, which mismatches real-world UI development that is inherently iterative and feedback-driven. We reformulate UI-to-code as an interactive visual optimization problem, where code generation is embedded in a closed-loop process of execution, visual inspection, and iterative refinement driven by rendered visual feedback. To address the non-differentiability of visual objectives and the noise of absolute visual evaluators, we propose Relative Visual Policy Optimization (RVPO), a preference-based reinforcement learning method that optimizes relative visual rankings among rendered candidates under execution feedback. We instantiate this paradigm in UI2Code^N, an open-source 9B model trained via continual pre-training, supervised fine-tuning, and reinforcement learning. Experiments demonstrate state-of-the-art performance on UI drafting, UI polishing, and UI editing benchmarks, even outperforming larger models, with performance consistently improving through iterative visual optimization. Our code and models are available at https://github.com/zai-org/UI2Code_N.

24.
arXiv (CS.CV) 2026-06-18

Clinically Aligned Geometry Constraints for Robust IVUS Vessel Boundary Segmentation

Intravascular ultrasound (IVUS) lumen and external elastic membrane (EEM) segmentation is important for quantitative coronary plaque burden assessment. Errors in lumen or EEM delineation directly propagate to plaque area, plaque burden and geometric measurements. However, standard methods prioritising overlap scores often suffer from boundary drift and topology errors, leading to inaccurate clinical measurements. We present GeoCat, a geometry-consistent network that processes 5-frame IVUS clips using dual Cartesian-polar encoders with cross-domain attention and temporal fusion. A differentiable geometry consistency loss directly supervises clinically relevant descriptors including diameters, orientations, and cross-sectional areas. The model is trained on 12,242 annotated frames from 146 patients acquired with two commercial IVUS systems. We evaluate performance using both segmentation accuracy and plaque-relevant clinical metrics, including Dice/IoU, boundary measures(95HD (mm), ASSD), topology violation rate, and clinical geometry errors (dmax/dmin, angles, and areas). On our dataset, GeoCat achieves a Dice of 0.93, reduces 95HD to 0.14 mm, and lowers topology violations to 1.0%. Importantly, it significantly improves geometric fidelity, yielding diameter errors of 0.13-0.16 mm and angular errors of ~8 degrees, supporting reliable plaque burden quantification.

25.
arXiv (CS.CV) 2026-06-16

Kairos: A Native World Model Stack for Physical AI

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.