×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Rim ×
Shuffle
01.
arXiv (CS.AI) 2026-06-11

From Architecture to Output: Structural Origins of Hallucination in Large Language Models and the Amplifying Role of Data

arXiv:2606.07537v1 Announce Type: cross Abstract: Large language models hallucinate–producing fluent, confident, factually wrong outputs–with a consistency that persists across generations and scales. Existing taxonomies classify hallucination by output type, distinguishing intrinsic from extrinsic failures and faithfulness from factuality divergence. These frameworks are descriptively rigorous but do not identify which internal mechanism produced a given instance. This paper analyses hallucination as a structural consequence of three architectural decisions that together form a compound failure system. Self-attention's co-occurrence learning substitutes statistical proximity for semantic meaning and produces entity confusion, fact misattribution, and semantic drift. The maximum likelihood estimation training objective optimises next-token probability without factual constraint, rewarding statistically plausible outputs regardless of their truth value. Autoregressive decoding's permanent left-to-right commitment under exposure bias ensures that a single wrong token cascades forward through the entire output sequence without revision. Dataset pathologies–long-tail deficiencies, training bias, and synthetic pollution–amplify these vulnerabilities but do not independently cause them. We make three contributions. First, we map each mechanism to a specific output category in the Alansari and Luqman taxonomy, locating intrinsic hallucination in self-attention, extrinsic hallucination in MLE, and logical inconsistency in autoregressive decoding. Second, we show that each commonly cited dataset pathology exploits one of these mechanisms rather than originating hallucination independently. Third, we identify the diagnostic limitation of output-type-only classification and contrast it with inference-layer mitigation approaches.

02.
arXiv (CS.CV) 2026-06-16

Robust Spoofed Speech Detection via Temporal Pyramid Modeling

Spoofed speech detection is increasingly challenged by realistic synthesis, voice conversion, and replay attacks, with cross-dataset generalization remaining a major limitation. This work we propose a Temporal Pyramid Adapter that utilize parallel temporal convolutions with varying receptive fields to capture multi-scale spoofing cues, ranging from local artifacts to global prosodic irregularities. We also integrated self-supervised XLS-R representations combined with front-end adapters, including Mel, Sinc, and a Temporal Pyramid design for multi-scale temporal modeling. The proposed model is evaluated cross multiple benchmark including ASVspoof 2017, ASVspoof 2021 (DF/LA), PartialSpoof, DiffSSD, and multilingual HQ-MPSD datasets. Experimental results demonstrate that Temporal Pyramid model obtained AUC of 99.24% and a EER of 3.87% on the PartialSpoof database, which is significantly outperforming the base model and several SOTA baseline such as LCNN-BLSTM (9.87% EER) and TRACE (8.08% EER). Additionally, multilingual evaluations confirm that while spoofing artifact are independent from language. While self-supervised representations improve robustness, performance degrades under domain and language shifts, highlighting the need for better adaptation and calibration strategies.

03.
arXiv (CS.LG) 2026-06-16

Temporal Validation Changes the Apparent Public-Health Utility of Under-Five Mortality Prediction in Bangladesh: A Four-Round DHS Machine-Learning Study

arXiv:2602.03957v2 Announce Type: replace Abstract: Background: Under-five mortality in Bangladesh remains uneven despite national progress. DHS-based prediction models may guide targeted follow-up, but only if validation reflects future use. We examined how validation design changes apparent prediction performance. Methods: Four BDHS rounds (2011-2022; 33,962 children; 1,290 deaths) were analysed with a 26-feature pipeline and three model classes under four validation regimes, including cross-survey temporal validation (train 2011+2014, calibrate 2017, test 2022). A 32-unit ELU multilayer perceptron was selected via genetic-algorithm neural architecture search. AUROC used 2,000 bootstrap resamples; screening utility used sensitivity, PPV, and number needed to screen (NNS) at fixed capacity. Results: Validation regime altered public-health interpretation more than model class. NAS MLP AUROC ranged from 0.669 (2022-only random) to 0.775 (pooled random), with temporal AUROC 0.730. At the top-10% temporal threshold, NAS identified 152/355 deaths in 2022 (sensitivity 42.8%, PPV 13.2%, NNS 7.6). NNS across designs ranged from 5.6 to 11.0. Conclusions: Validation-regime choice changed screening workload and apparent policy value more than architecture. Temporal validation supports defensible estimates of follow-up and referral demand; DHS child-mortality studies should report sensitivity, PPV, and NNS before programmatic use.

04.
medRxiv (Medicine) 2026-06-17

Deep learning for interactive and automated inner retinal layer segmentation in OCT images of patients with retinitis pigmentosa using limited training data

Purpose: New therapeutic strategies such as optogenetics have created a need for accurate tracking of inner retina degeneration in Retinitis pigmentosa (RP) patients. We introduce two tailored deep learning models to segment the RNFL (retinal nerve fibre layer), GCIPL (ganglion cell inner plexiform layer), INL (inner nuclear layer), CFT (central foveal thickness) and RPE (retinal pigment epithelium) in RP: The first is based on a Segment Anything Model (SAM), the second on nnU-Net. To our knowledge, SAM has not yet been applied to retinal layers in OCT data. Methods: SD-OCT images of a retrospective cohort of 37 RP patients were included. Data for four training cycles were prepared semi-automatically in MATLAB, then assessed and corrected by three expert graders. 1,700 segmented B-Scans from two open datasets were used for pretraining. For post-processing, semantic retinal boundary detection was developed. The final models, OCT-SAM and nnU-Net, were trained on 228 annotated RP scans. Detected layer thicknesses were validated against manual segmentation at 90 random points in 30 OCT B-Scans. Finally, OCT-SAM was tested on three RP cases with retrospective, longitudinal OCT data. Results: nnU-Net achieved a precision, recall and F-1 score of 0.96 while OCT-SAM performance resulted in slightly lower values of 0.93, 0.8 and 0.85, respectively. OCT-SAM measurements had low bias and good agreement with manual annotations, confirming reliability. Conclusions: OCT-SAM enabled fast data annotation and tool integration, whereas nnU-Net provided the best segmentation performance. OCT-SAM demonstrated longitudinal reproducibility and detected RP-characteristic pathologies and degenerative changes. Future work will extend OCT-SAM to 3D OCT segmentation.

05.
arXiv (CS.CV) 2026-06-19

LaTtE-Flow: Layerwise Timestep-Expert Flow-based Transformer

Recent advances in multimodal foundation models unifying image understanding and generation have opened exciting avenues for tackling a wide range of vision-language tasks within a single framework. Despite progress, existing unified models typically require extensive pretraining and struggle to achieve the same level of performance compared to models dedicated to each task. Additionally, many of these models suffer from slow image generation speeds, limiting their practical deployment in real-time or resource-constrained settings. In this work, we propose Layerwise Timestep-Expert Flow-based Transformer (LaTtE-Flow), a novel and efficient architecture that unifies image understanding and generation within a single multimodal model. LaTtE-Flow builds upon powerful pretrained Vision-Language Models (VLMs) to inherit strong multimodal understanding capabilities, and extends them with a novel Layerwise Timestep Experts flow-based architecture for efficient image generation. LaTtE-Flow distributes the flow-matching process across specialized groups of Transformer layers, each responsible for a distinct subset of timesteps. This design significantly improves sampling efficiency by activating only a small subset of layers at each sampling timestep. To further enhance performance, we propose a Timestep-Conditioned Residual Attention mechanism for efficient information reuse across layers. Experiments demonstrate that LaTtE-Flow achieves strong performance on multimodal understanding tasks, while achieving competitive image generation quality with around 6x faster inference speed compared to recent unified multimodal models.

06.
arXiv (CS.LG) 2026-06-16

Leveraging Physiological Signals to Predict Exam Outcomes with Machine Learning

arXiv:2606.14960v1 Announce Type: new Abstract: This study investigates the application of machine learning models to predict exam outcomes using physiological data collected during examination sessions. Physiological stress indicators, including electrodermal activity, heart rate, and skin temperature, were analyzed to uncover their association with academic performance. A variety of machine learning approaches were employed, ranging from standard models like logistic regression, random forest, and support vector machines to more advanced architectures, including transformers, long short-term memory (LSTM), and gated recurrent unit (GRU) models. This diversity aimed to capture the complex interactions within the data effectively. A key focus was assessing the adaptability of transformers in processing numerical data and evaluating their performance in this novel context. Standard performance metrics, such as accuracy, precision, recall, and F1-score, were used to compare model efficacy. The experimental results demonstrate that while deep learning models generally excel at capturing complex relationships in physiological data, simpler models like random forests can sometimes achieve superior performance while offering computational efficiency and interpretability. Furthermore, transformers demonstrated notable versatility, showcasing performances comparable to those of the LSTM and GRU models. This research underscores the importance of experimenting with a broad class of models that align with the objectives of the problem at hand, balancing precision, efficiency, and interpretability. By elucidating the relationships between physiological signals and academic performance, this study contributes to understanding stressors affecting students' mental health. It further promotes leveraging physiological data to enhance student well-being and academic outcomes.

07.
arXiv (CS.CV) 2026-06-11

Adv-TGD: Adversarial Text-Guided Diffusion for Face Recognition Impersonation Attacks

The widespread adoption of face recognition (FR) technologies raises serious privacy concerns, as facial data can be exploited without consent. To address this challenge, we propose Adv-TGD, a generative adversarial attack framework that synthesizes photorealistic faces capable of impersonating target identities and deceiving face recognition systems. Built upon Stable Diffusion, Adv-TGD performs per-sample LoRA fine-tuning conditioned on concise textual prompts to generate natural yet adversarially manipulated identities. Unlike conventional identity-attack approaches, our method optimizes lightweight cross-attention adapters for each source-target pair within a single-step denoising process. Latent blending is constrained by a face-local heatmap mask to ensure spatially precise identity manipulation while preserving non-sensitive regions. We introduce a composite objective that integrates masked epsilon-MSE reconstruction, thresholded identity divergence in FR embedding space, directional feature alignment, and source-similarity suppression to balance adversarial attack and visual realism. Optionally, LLaVA-generated attribute prompts enhance fine-grained semantic details without reintroducing identity cues. Under the black-box evaluation protocol, Adv-TGD attains an average attack success rate (ASR) of 85.90% across IR152, IRSE50, MobileFace, and FaceNet, surpassing the semantic SOTA baseline Adv-CPG by +6.25 points, diffusion-based makeup method DiffAIM by +3 points, and noise-based P3-Mask by +16 points. Despite its strong attack efficacy, Adv-TGD preserves high visual fidelity (PSNR = 27.15 dB, SSIM = 0.981). Furthermore, we demonstrate the flexibility of our framework by successfully extending it to in-the-wild datasets (LADN), general object classification (ImageNet), and transformer-based diffusion models (FLUX.1).

08.
arXiv (CS.LG) 2026-06-18

A physical adaptive material motor unit neural network: a hygromorph composite material machine

arXiv:2606.18275v1 Announce Type: cross Abstract: Advances in novel materials science enable structures to function as intelligent machines by embedding memory and learning capabilities directly into materials. Our work introduces a physical adaptive material motor unit neural network,leveraging a new generation of controllable actuators composed of wood- and carbon black-based composites, sensitive to temperature and relative humidity. These material actuators are assembled into a motor unit-like structure inspired by muscle contraction trigger, forming an intelligent machine capable of dynamic shading control that can be used, for example, in buildings. The machine is governed by a neural network trained on over 350 experimental data points collected under diverse environmental conditions. By establishing a new data-aware backpropagation training, we show that the machine predicts shading responses and learns to predict appropriate behaviour incrementally as the database expands. We also demonstrate the ability of the machine to optimise configurations to achieve similar shading outputs under two distinct conditions.

09.
arXiv (quant-ph) 2026-06-24

Cornell Interaction in the Two-body Pauli-Schrödinger-type Equation Framework: The Symplectic Quantum Mechanics Formalism

arXiv:2507.20045v3 Announce Type: replace Abstract: We investigate the quantum behavior of a quark-antiquark bound system under the influence of a magnetic field within the symplectic formulation of quantum mechanics. Employing a perturbative approach, we obtain the ground and first excited states of the system described by the Cornell potential, which incorporates both confining and non-confining interactions. After performing a Levi-Civita mapping in phase space, we solve the time-independent symplectic Pauli-Schrödinger-type equation and determine the corresponding Wigner function. Special attention is given to the observation of the confinement of the quark-antiquark, that is revealed in the phase space structure. Due to the presence of spin in the Hamiltonian, the results reveal that the magnetic field enhances the non-classicality of the Wigner function, signaling stronger quantum interference and a departure from classical behavior. The experimental mass spectra is used to estimate the intensity of the external field, leading to a value that is in order of the transiet magnetic field measured in non-central heavy-ion collisions at RHIC and LHC.

10.
PLOS Computational Biology 2026-06-22

Ten simple rules for making the supplement increase your paper’s impact

Authors:

by Volker Grimm, Uta Berger, Stefano Mammola Have you ever lost hours navigating supplementary materials—clicking between the main text and dozens of auxiliary files only to encounter broken links, illegible figures, and undefined variables and acronyms? If so, you’re not alone. What should support scientific communication has instead become an obstacle: supplementary information (SI) increasingly suffers from inconsistent formatting, poor accessibility, and fragmented organization that impedes rather than advances understanding. This is disheartening since the SI, if used effectively, has the power to enhance transparency, credibility, and reproducibility of research. Therefore, we propose 10 simple rules to help authors design SI that genuinely increase the impact of their research. The rules emphasize treating SI with the same care as the main text, using it strategically to support the scientific narrative while preserving clarity and focus. Key recommendations include creating a single, well-structured, self-contained SI master document; ensuring explicit cross-referencing between the main text and SI; making SI machine-readable; and avoiding the misuse of SI as a substitute for proper data repositories. We also highlight the importance of creativity in choosing appropriate formats and strict adherence to journal-specific guidelines. Finally, when available, we advocate the use of standardized templates to improve consistency, readability, and reuse across studies. By following these rules, authors can substantially increase the scientific impact of their work while at the same time contributing to more sustainable research practices.

11.
arXiv (CS.CV) 2026-06-11

Feature extraction for plant growth estimation

Precision agriculture requires the estimation of plant growth stages in real-time. When the plant growth stage is known, the wastage of resources in cultivation, such as nutrients and water, is reduced as only the required resources need to be supplied. Plants at different growth stages, however, have similar morphological features, which can make autonomous growth stage estimation difficult. This paper presents two feature extraction methods for growth stage estimation: one that uses a bank of Gabor filters and morphological operations, and the other that uses pre-trained convolutional neural networks (CNNs) and transfer learning. We test these methods on a publicly available plant growth stage dataset (``bccr-segset``) for two species, canola and radish, grown and captured under indoor conditions. The two proposed feature extraction methods are compared, using support vector machines and boosted trees as classifiers. We find that both methods are suitable for real-time applications, and that CNN features outperform the hand-crafted features, both with regard to speed and accuracy. The best system (VGG-19 features, classified with a radial basis function support vector machine) obtained an accuracy of 98.4% for both species, processing an image in 0.08 seconds.

12.
arXiv (CS.CV) 2026-06-16

A Multi-Center Benchmark for Abdominal Disease Diagnosis and Report Generation from Non-Contrast CT

Multiphasic contrast-enhanced CT (CECT) is widely used for abdominal lesion characterization, yet it carries inherent risks of contrast-induced nephropathy, escalates acquisition burden, and heavily contributes to radiologist workload. To address these challenges, we introduce a novel multi-center benchmark for multi-organ abdominal disease diagnosis and automated radiology report generation, which learns to synthesize contrast-enhanced findings from single-phase non-contrast CT (NCCT). To support this, we curated a large-scale dataset of paired NCCT-CECT studies and their corresponding contrast-enhanced radiology reports from two centers, partitioned into internal sets and an external validation cohort. Under a unified evaluation protocol, we benchmarked five contemporary deep learning architectures encompassing chest-specific, abdomen-specific, and general-purpose multimodal domains. Extensive experiments demonstrate that NCCT retains diagnostic signals, achieving an average multi-organ AUC of 69.1% on the internal cohort and 63.1% on the external cohort, respectively. By releasing this dataset and standardized benchmark publicly, this study aims to catalyze future research into safer, resource-efficient, and globally accessible contrast-free abdominal imaging workflows. Code is available at: https://github.com/xmed-lab/TriALS-Report.

13.
bioRxiv (Bioinfo) 2026-06-11

EditorForge: An Active-Site-Aware Framework for Inverse-Folding-Based Protein Redesign

Inverse-folding models can rapidly generate protein sequences compatible with a supplied backbone, but unconstrained redesign is poorly suited to enzyme and genome-editor-associated domains, where catalytic, substrate-proximal, and conserved structural regions must remain protected. In this paper, we present EditorForge, a modular constraint-and-audit suite for editor-domain protein redesign that wraps fixed-backbone inverse folding with explicit design masks, fixed-position enforcement, active-site-proximity auditing, active-site-shielded regeneration, and downstream structural quality control. Using full-length Moloney murine leukemia virus reverse transcriptase structure 4MH8 (MMLV RT 4MH8) as a demonstration target, EditorForge first restricted redesign to a bounded 25-position envelope while fixing 428 residues. An initial audit detected active-site-proximal failure modes despite fixed-position integrity. Later, the Active Site Shield module then removed five unsafe design positions, replaced them with lower-contact alternatives, and regenerated candidates under stricter constraints. Post Shield Audit evaluated 24 regenerated candidates, all of which satisfied the hard sequence/mask and active-site-shield constraints. For the eight candidates that were selected or returned for structure-prediction/refolding quality control. Enhanced RefoldQC found that all 8 evaluated predicted structures passed the computational structure-QC screen. That said, the selected 8 candidates passed the computational structure-QC screen, with global C RMSD values of 1.2061–1.5555~[A], active-site C RMSD values of 0.4098–1.8397~[A], mutation-neighborhood C RMSD values of 1.3155-1.6848~[A], and average pLDDT-like confidence values of 94.87-95.11. In short, EditorForge provides a reproducible triage layer that converts general inverse-folding output into constrained and editor-specific candidate sets for downstream structural and biological review on top of existing structural prediction tools.

14.
arXiv (CS.CV) 2026-06-17

A geometric and deep learning reproducible pipeline for monitoring floating anthropogenic debris in urban rivers using in situ cameras

The proliferation of floating anthropogenic debris in rivers has emerged as a pressing environmental concern, exerting a detrimental influence on biodiversity, water quality, and human activities such as navigation and recreation. The present study proposes a novel methodological framework for the monitoring the aforementioned waste, utilising fixed, in-situ cameras. This study provides two key contributions: (i) the continuous quantification and monitoring of floating debris using deep learning and (ii) the identification of the most suitable deep learning model in terms of accuracy and inference speed under complex environmental conditions. These models are tested in a range of environmental conditions and learning configurations, including experiments on biases related to data leakage. Furthermore, a geometric model is implemented to estimate the actual size of detected objects from a 2D image. This model takes advantage of both intrinsic and extrinsic characteristics of the camera. The findings of this study underscore the significance of the dataset constitution protocol, particularly with respect to the integration of negative images and the consideration of temporal leakage. In conclusion, the feasibility of metric object estimation using projective geometry coupled with regression corrections is demonstrated. This approach paves the way for the development of robust, low-cost, automated monitoring systems for urban aquatic environments.

15.
arXiv (CS.LG) 2026-06-11

REACH: Interpretability-Driven Feature Identification and Architecture Compression for Multi-Channel Vehicular Channel Estimation

arXiv:2606.11857v1 Announce Type: cross Abstract: Multi-channel mixed-SNR training improves out-of-distribution (OOD) generalisation of deep learning channel estimators for IEEE 802.11p vehicular communications, yet the internal mechanism responsible for this remains unexplained. This work presents REACH (Relevance-based Explanation and Architectural Compression for cHannel estimators), a gradient-based interpretability framework that operates at two levels. Input-level attribution identifies a subset of time-frequency features consistently relevant across all evaluated channel conditions, enabling input dimensionality reduction with minimal performance loss. Filter-level attribution reveals a near-universal internal representation, providing a representational account of the observed OOD generalisation. Guided by the resulting filter taxonomy, relevance-guided architecture compression substantially reduces both the number of parameters and the number of floating-point operations (FLOPs) with sub-1 dB normalised mean square error (NMSE) degradation, and OOD generalisation degrades more slowly than within-distribution accuracy under increasing compression.

16.
arXiv (CS.CV) 2026-06-12

Radar-Guided Polynomial Fitting for Metric Depth Estimation

We propose POLAR, a novel radar-guided depth estimation method that introduces polynomial fitting to efficiently transform scaleless depth predictions from pretrained monocular depth estimation (MDE) models into metric depth maps. Unlike existing approaches that rely on complex architectures or expensive sensors, our method is grounded in a fundamental insight: although MDE models often infer reasonable local depth structure within each object or local region, they may misalign these regions relative to one another, making a linear scale and shift (affine) transformation insufficient given three or more of these regions. To address this limitation, we use polynomial coefficients predicted from cheap, ubiquitous radar data to adaptively adjust predictions non-uniformly across depth ranges. In this way, POLAR generalizes beyond affine transformations and is able to correct such misalignments by introducing inflection points. Importantly, our polynomial fitting framework preserves structural consistency through a novel training objective that enforces local monotonicity via first-derivative regularization. POLAR achieves state-of-the-art performance across three datasets, outperforming existing methods by an average of 24.9% in MAE and 33.2% in RMSE, while also achieving state-of-the-art efficiency in terms of latency and computational cost.

17.
arXiv (CS.LG) 2026-06-11

Probabilistic Contrastive Pretraining for Multi-task ADME Property Prediction

arXiv:2606.11508v1 Announce Type: new Abstract: Accurate prediction of absorption, distribution, metabolism, and excretion (ADME) properties is critical to drug discovery, but remains challenging because ADME endpoints are noisy, interdependent, and often data-limited. We propose a molecular graph-transformer pretraining framework that combines chemistry-specific self-supervision with contrastive mutual information machine learning (cMIM). Our method encodes molecular graphs into latent variables, reconstructs SMILES strings from the graph-derived latent codes, and augments the contrastive objective with domain-specific self-supervised chemistry tasks. Rather than treating these tasks as auxiliary regularizers with separately tuned loss weights, we formulate reconstruction, contrastive discrimination, and chemistry-specific supervision as unit-weighted log-probability factors in a single probabilistic latent-variable objective. For fine-tuning, we propose a multi-task GNN readout architecture with task-specific multilayer perceptron heads, preserving shared representation learning while mitigating negative transfer and improving the modeling of heterogeneous, nonlinear task relationships. Across Biogen, ExpansionRX, and ChEMBL-MT, the resulting Contrastive KERMT pretraining improves over the KERMT baseline by 7.6%, 9.9%, and 9.5% respectively (averaged over significantly-improved endpoints). Adding ADME-adjacent molecules to the pretraining corpus further improves transfer, and the contrastive component sharpens chemically meaningful latent neighborhoods.

18.
arXiv (quant-ph) 2026-06-12

QuBE/Qubex: an integrated hardware-software system for superconducting qubit experiments with broadband control

arXiv:2606.13010v1 Announce Type: new Abstract: Achieving high-fidelity operation in large-scale superconducting qubit systems requires not only control hardware with broad frequency coverage, low crosstalk, and tight synchronization but also software that coordinates system configuration, experiment execution, and data analysis. Here we present an integrated qubit-control system that combines broadband microwave hardware with a pulse-level software stack for scalable superconducting qubit experiments. The hardware provides broadband microwave coverage, including an instantaneous span of up to 1.6 GHz from a control output, while the software reduces setup and calibration overhead through automated configuration and built-in experiment workflows. We validate the system on a 64-qubit fixed-frequency transmon chip through full-chip frequency identification and representative demonstrations, including multi-unit far-detuned cross-resonance calibration and benchmarking that yields a measured two-qubit gate fidelity of 98.34%, and multilevel readout beyond the computational subspace. By disclosing the hardware architecture and releasing the software stack as open source, this work provides an inspectable hardware-software foundation for scalable superconducting qubit control experiments.

19.
arXiv (CS.LG) 2026-06-15

Neural ARFIMA model for forecasting BRIC exchange rates with long memory

arXiv:2509.06697v3 Announce Type: replace-cross Abstract: Exchange rate forecasting remains a challenging problem, particularly for emerging economies, where the observed time series exhibit pronounced long-memory dependence, nonlinear dynamics, and sensitivity to macro-financial drivers. Classical models such as ARFIMA capture long-range persistence but fail to adequately represent nonlinear relationships, while modern machine learning approaches often neglect the underlying long-memory structure in macroeconomic series. To address this gap, we propose a Neural AutoRegressive Fractionally Integrated Moving Average (NARFIMA) model that integrates ARFIMA-based long-memory modeling with neural networks for nonlinear function approximation, while incorporating exogenous macroeconomic and uncertainty indicators. The framework provides a unified approach for capturing persistence, nonlinear dynamics, and external shocks. We establish asymptotic stationarity of the NARFIMA process and develop conformal prediction intervals for distribution-free uncertainty quantification. Empirical results for BRIC exchange rates show that NARFIMA consistently outperforms a broad range of forecasting benchmarks across multiple horizons, underscoring the importance of explicitly modeling long-memory dependence in exchange rate dynamics. The `narfima' R package provides an implementation of our approach.

20.
arXiv (CS.AI) 2026-06-16

RecourseBench: A Modular Framework for Reproducible Algorithmic Recourse Evaluation

arXiv:2606.16113v1 Announce Type: new Abstract: Algorithmic recourse methods provide counterfactual explanations that inform individuals of the actions required to overturn an unfavorable model decision. Despite rapid methodological progress, principled comparison remains elusive; existing frameworks are often difficult to extend and lack both interoperability and systematic verification that integrated methods faithfully reproduce their originally reported results. We introduce RecourseBench, a unified evaluation framework built around three commitments namely, modularity, reproducibility, and interactivity. The framework decomposes the pipeline into five fully decoupled layers – Data, Preprocessing, Model, Recourse Method, and Evaluation – governed by abstract interfaces and a dynamic registry. To address the reproducibility gap in prior benchmarks, we introduce a four-tier classification system in which every integrated method is validated by an automated test suite against its originally reported results. We further provide an interactive web interface for flexible, configuration-driven comparison across methods, datasets, and model architectures. Our framework currently integrates 28 state-of-the-art recourse methods and, to our knowledge, constitutes the first recourse benchmark to explicitly enforce method-level reproducibility through automated, quantitative testing.

21.
arXiv (CS.CV) 2026-06-15

How do Self-Supervised Remote Sensing Vision Models Transfer to Downstream Tasks?

Self-supervised geospatial foundation models (GeoFMs) learn transferable representations from remote sensing data, but their downstream behavior is difficult to characterize. We study six representative GeoFMs spanning joint-embedding, reconstruction, and multimodal pretraining families, and evaluate transfer across classification, regression, and segmentation benchmarks under different label availability and downstream pipelines. We find that model rankings change across tasks and adaptation settings. Layerwise probing shows that, in most cases, task-relevant information is more accessible in intermediate transformer blocks compared to final-layer embeddings, and that GeoFMs exhibit distinct depthwise profiles. In segmentation case studies on PASTIS and Sen1Floods11, downstream adaptation settings such as decoder design and fine-tuning can be as impactful as the choice of GeoFM, and standard dense-prediction heads may be poorly aligned with how GeoFMs organize information over depth. Finally, CKA analysis on case studies shows that fine-tuning does not rewrite GeoFMs uniformly across depth, and the strongest changes are localized to the first linear layer of the MLP in ViT blocks. These results help explain why GeoFM rankings shift across benchmarks and motivate more representation-aware evaluation and adaptation strategies.

22.
arXiv (quant-ph) 2026-06-12

Explicit Quantum Circuit Simulation of Nonlinear 1-Dimensional Fluid with Carleman-linearized Boltzmann Method

arXiv:2606.12770v1 Announce Type: new Abstract: Quantum computation of fluid dynamics has attracted growing attention as a key application of fault-tolerant quantum computers anticipated in the coming decade, with lattice Boltzmann methods emerging as a particularly promising approach. Explicit and efficient elementary-gate-level circuit simulations, however, have so far been demonstrated only in the linear case. Here we include the leading nonlinearity through second-order Carleman linearization of the one-dimensional Boltzmann equation, and demonstrate, via explicit quantum-circuit simulation, the preparation of the final-time state using a Taylor-expansion-based ODE solver based on the quantum singular value transformation. With this construction, we analyze the gate and qubit complexities, which scale logarithmically with the grid size, the nonlinearity captured by the higher-order Carleman linearization, and the practical utility of higher-order expansions in the Taylor ODE solver. The construction provides a concrete baseline for computational cost reduction and further developments such as extensions to higher dimensions, complex geometries, and the extraction of physical quantities, towards industrially useful quantum CFD.

23.
Nature (Science) 2026-06-24

Role of methanesulfonic acid in atmospheric particle nucleation and growth

Authors:

Dimethylsulfide (DMS; CH3SCH3) from marine phytoplankton is a major source of atmospheric sulfur 1. Its oxidation products include sulfuric acid (SA; H2SO4) and methanesulfonic acid (MSA; CH3SO3H), which has a higher yield than SA below 10 °C 2. Whereas SA is known to drive the formation of new particles 3, which may subsequently grow and act as cloud condensation nuclei (CCN), the role of MSA remains unclear 4. Here, in experiments performed under atmospheric conditions at the CERN CLOUD (Cosmics Leaving OUtdoor Droplets) chamber, we show that MSA nucleates together with ammonia (NH3) below −10 °C, at rates comparable to SA-NH3. Moreover, MSA and SA nucleate synergistically below −10 °C, forming multi-acid molecular clusters with NH3. Even at ultra-low NH3 levels, MSA drives particle growth at or near the kinetic limit below 9 °C and above 40 % relative humidity (RH). Since MSA and SA generally coexist at similar concentrations in cool marine regions, our findings indicate that nucleation rates may be accelerated up to tenfold and growth rates up to twofold compared with SA-NH3 alone. Our global model simulations indicate that MSA can enhance CCN concentrations, especially in polar regions. We propose that MSA might be an important driver of biogenic particles in cool, pristine marine regions of both the present-day and pre-industrial atmospheres, and yet is unaccounted for in global climate models 5.

24.
arXiv (quant-ph) 2026-06-24

Ground-State Energy Solutions of the Lithium Atom: Zeroth-, First-, and Second-Order Perturbation Theory and the Variational Method

arXiv:2606.24238v1 Announce Type: new Abstract: In this work, the ground-state energy of the lithium atom is systematically investigated using both time-independent perturbation theory and the variational method to provide a comprehensive pedagogical analysis of many-body atomic systems. The unperturbed Hamiltonian is initially constructed by neglecting electron-electron interactions, treating the system as three independent hydrogen-like electrons to yield a zeroth-order energy baseline of -275.51 eV. The antisymmetric fermionic nature of the exact wave function is rigorously enforced through the Slater determinant formalism. First-order perturbation theory is applied to evaluate static inter-electronic repulsion using exact Coulomb and exchange integrals, refining the energy state to -192.01 eV. To account for dynamical electronic correlation, second-order perturbation theory is computed numerically for virtual single-electron s-orbital transitions, leading to a total perturbative energy of -196.36 eV. A brief discussion of two-electron excitations is also included to encapsulate further physical realism within the framework. Furthermore, a non-orthogonal two-parameter variational approach is employed to model the shell-specific shielding effect. By optimizing the effective nuclear charges, the variational method establishes a superior upper bound energy of -201.187 eV. The results of both methods are comprehensively contrasted against each other and the reference baseline to provide critical insights into the nature of electron correlation and screening in multi-electron atoms.

25.
arXiv (quant-ph) 2026-06-16

Bright Emission from Dark Sources in Hyperbolic Media

arXiv:2606.16071v1 Announce Type: cross Abstract: Hyperbolic media enable ultra-strong light-matter interactions through their extreme field localization and small mode volumes, but low-loss realizations are fundamentally limited to the mid-infrared, owing to the long lifetimes of optical phonons in high-quality crystals. Here we show that bright emitters operating at visible or near-infrared frequencies can be used to generate radiation in this regime by inducing mid-infrared population dynamics, thereby creating a source in the hyperbolic frequency band without a corresponding dipole transition. We demonstrate that even a source with vanishing dipole and higher multipole moments - strictly non-radiating in any isotropic medium - becomes radiatively active in a hyperbolic environment. This enables visible and near-infrared control of light-matter interactions in polaritonic hyperbolic materials, establishing a new low-loss solid-state quantum optics platform.