×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Ran Hou ×
换一批
01.
arXiv (CS.CV) 2026-06-19

HumanScale: Egocentric Human Video Can Outperform Real-Robot Data for Embodied Pretraining

Embodied foundation models are expected to benefit from data scaling like large language models, but face a much tighter data bottleneck. Teleoperated real-robot trajectories remain the dominant pretraining source due to their precise action supervision and embodiment alignment, yet their scalability is limited by high collection cost, acquisition difficulty, and low behavioral and environmental diversity. These limitations have sparked interest in egocentric human video as a scalable, substantially lower-cost, and more diverse alternative for embodied model pretraining. However, its effectiveness compared to teleoperated real-robot data remains underexplored. To address this question, we conduct a systematic study comparing egocentric human video and teleoperated real-robot trajectories as pretraining data sources for embodied foundation models, under fixed post-training and validation protocols. Surprisingly, we find that egocentric data, when processed through a carefully designed filtering and labeling pipeline, is not merely a viable substitute for model pretraining but can lead to superior performance. With the same amount of pretraining data, models pretrained on egocentric data achieve a 24% lower validation loss on real-robot action prediction, as well as 52.5% and 90% higher success rates on in-distribution and out-of-distribution real-robot task execution, respectively. This finding verifies a scalable paradigm for embodied foundation models: pretrain on egocentric human video to learn diverse world representations, then adapt with a small amount of labeled real-robot data for action-space alignment. We hope this study encourages broader exploration of egocentric data and offers guidance for data quality assessment before costly robot data collection.

02.
arXiv (quant-ph) 2026-06-19

Propagating Collective Spin-valley Modes in Twisted WSe2

arXiv:2507.18770v2 Announce Type: replace-cross Abstract: The emergence of neutral collective modes is a hallmark of correlated quantum phases but is often challenging to probe experimentally. In two-dimensional flatband systems, charge responses have been intensively investigated yet neutral excitations remain largely unexplored. In particular, intervalley coherent state (IVC) features a neutral Goldstone mode due to spontaneously broken valley U(1) symmetry. While IVC state has been proposed as a unifying theme across graphene and semiconductor based systems, its defining feature, the neutral Goldstone mode, remains elusive in experiment. Here we investigate space and time resolved transport of neutral modes in twisted WSe2 moire superlattices through a novel ultrafast imaging technique. We uncover two new propagating collective modes with very different velocities, which emerge near the van Hove singularity (VHS) in both intermediate (3.5 to 4 degree) and large (around 5 degree) angle twisted WSe2. The fast-propagating mode has a large speed of about 3 km/s and is consistent with a Goldstone mode for an IVC state, while the slow-moving mode is likely a gapped amplitude mode. They can be understood as the spin-valley analogues of collective modes of a superfluid, whose propagation is imaged for the first time in a condensed matter system. Our study demonstrates a powerful new approach for probing charge-neutral modes in quantum materials and offers key insights into the interplay between charge and spin-valley physics in moire superlattices.

03.
arXiv (CS.LG) 2026-06-19

A graph neural network surrogate model for mesh-based crashworthiness prediction of vehicle panel components

arXiv:2503.17386v2 Announce Type: replace-cross Abstract: Crashworthiness is a key performance measure in the design of safety-critical vehicle panel components such as B-pillars. Finite element (FE) simulations are widely used to evaluate crash responses but remain computationally expensive for large-scale, nonlinear impact scenarios, particularly when integrated into iterative design and optimisation processes. Although machine learning-based surrogate models have been developed for rapid crashworthiness analysis, they exhibit limitations in detailed representation of complex 3-dimensional components. Graph Neural Networks (GNNs) have emerged as a promising solution for processing data with complex structures. However, existing GNN models often lack sufficient accuracy and computational efficiency to meet industrial demands. This paper proposes Recurrent Graph U-Net (ReGUNet), a graph-based surrogate model for crashworthiness analysis of vehicle panel components. By representing FE meshes in graph form, the model naturally accommodates complex irregular structural geometries. Its hierarchical architecture improves computational efficiency and accuracy, while the introduction of recurrence enhances stability of temporal predictions over multiple time steps. A side-impact case study of hot-stamped steel B-pillars with varying geometries is used to generate training dataset. The trained model demonstrates high accuracy in predicting the dynamic deformation behaviour and crashworthiness indicators of previously unseen component designs. ReGUNet achieves over a 52% reduction in the average deformation prediction error relative to baseline methods, together with markedly improved computational efficiency. ReGUNet provides rapid and reliable crashworthiness assessments, which in turn accelerates the design cycle of vehicle panel components.

04.
arXiv (CS.LG) 2026-06-19

Mask-Morph Graph U-Net: A Generalisable Mesh-Based Surrogate for Crashworthiness Field Prediction under Large Geometric Variation

arXiv:2605.15231v2 Announce Type: replace Abstract: Nonlinear finite element crash simulations are accurate but computationally expensive, limiting their use in iterative design optimisation. Machine-learning surrogate models based on graph neural networks (GNNs) offer a faster alternative. Message-passing GNNs are widely used for mesh simulation, and their shared node and edge update functions are relatively generalisable across varying graph structures. By contrast, non-shareable edge-specific aggregation layers can capture nonlinear relationships more accurately but usually require fixed graph connectivity, which limits generalisability. This paper presents Mask-Morph Graph U-Net (MMGUNet), a practical approach to addressing the limitation of hierarchical Graph U-Net architectures that use edge-specific downsampling and upsampling layers. Fixed coarse graph connectivity is required for edge-specific layers. To retain this while improving spatial correspondence, the proposed method morphs the coarsened graph hierarchy to each input mesh using feature-aligned barycentric parameterisation before constructing cross-graph edges. It further applies node masking during supervised pretraining, followed by parameter-efficient fine-tuning in which high-parameter edge-specific layers are frozen. The proposed approach is evaluated in in-distribution, out-of-distribution, and cross-component transfer settings using mean Euclidean distance and maximum intrusion percentage error. Results show that coarse-graph morphing improves test accuracy relative to a fixed-coarse-graph baseline, while masked supervised pretraining reduces the train-test discrepancy and improves data efficiency during transfer. The proposed model also achieves lower prediction error compared with external baselines. These results demonstrate a practical route toward reusable, data-efficient mesh-based surrogate modelling for crashworthiness design exploration.

05.
arXiv (CS.AI) 2026-06-19

The MAMA-MIA Challenge: Advancing Generalizability and Fairness in Breast MRI Tumor Segmentation and Treatment Response Prediction

arXiv:2603.01250v2 Announce Type: replace-cross Abstract: Breast cancer is the most frequently diagnosed malignancy among women worldwide and a leading cause of cancer-related mortality. Dynamic contrast-enhanced magnetic resonance imaging plays a central role in tumor characterization and treatment monitoring, particularly in patients receiving neoadjuvant chemotherapy. However, existing artificial intelligence models for breast magnetic resonance imaging are typically developed and evaluated using heterogeneous datasets, study populations, and assessment protocols, making direct comparison difficult and limiting understanding of model robustness across institutions and clinically relevant patient subgroups. The MAMA-MIA Challenge was designed to address these challenges by providing a standardized benchmark for the joint evaluation of primary tumor segmentation and prediction of pathologic complete response using pre-treatment magnetic resonance imaging only. The training cohort comprised 1,506 patients from multiple institutions in the United States, while evaluation was conducted on an external test set of 574 patients from three independent European centers to assess cross-continental and cross-institutional generalization. A unified scoring framework combined predictive performance with subgroup consistency across age, menopausal status, and breast density. Twenty-six international teams participated in the final evaluation phase. Results demonstrate substantial performance variability under a common external evaluation framework and reveal trade-offs between overall accuracy and subgroup fairness. The challenge provides standardized datasets, evaluation protocols, and public resources to promote the development of robust and equitable artificial intelligence systems for breast cancer imaging.

06.
arXiv (CS.AI) 2026-06-19

ProMUSE: Progressive Multi-modal Uncertainty-guided Staged Evidential Alzheimer Disease Classification

arXiv:2606.19371v1 Announce Type: cross Abstract: Alzheimer's disease (AD) is a fatal disorder that destroys memory and cognitive skills in the elderly population. Most treatments for AD are effective in the early stage, leading to an increasing demand for early AD diagnosis. AD diagnosis increasingly relies on multimodal data such as clinical assessments, structural Magnetic Resonance Imaging (MRI), and Positron Emission Tomography (PET) imaging. However, MRI and PET acquisition remain costly and not universally accessible, making full-modality inference impractical in real-world clinical workflows. We propose ProMUSE, a Progressive Multi-modal Uncertainty Guided Staged Evidential Network that adaptively determines when additional modalities are necessary, helping reduce the overall cost of data acquisition while maintaining accuracy. ProMUSE first performs evidential classification using low-cost clinical data and quantifies uncertainty via a Dirichlet-based subjective logic model. When uncertainty exceeds a learned threshold, ProMUSE progressively incorporates MRI or PET features, fusing modality-wise belief and uncertainty through Dempster-Shafer theory to obtain a calibrated multimodal prediction. This staged acquisition strategy enables accurate diagnosis while minimizing reliance on expensive imaging. Experiments on ADNI, AIBL, and OASIS across CN-AD, CN-MCI, and MCI-AD tasks demonstrate that ProMUSE achieves competitive or superior accuracy compared to full-modality baselines while reducing MRI/PET usage by 50-90%, yielding substantial cost savings. These results highlight ProMUSE as a practical, uncertainty-aware, and resource-efficient solution for real-world AD screening.

07.
arXiv (CS.AI) 2026-06-19

ORAgentBench: Can LLM Agents Solve Challenging Operations Research Tasks End to End?

arXiv:2606.19787v1 Announce Type: new Abstract: Large language models are increasingly deployed as autonomous agents for multi-step tasks in executable environments, yet their ability to perform realistic operations research (OR) work remains unclear. Existing OR evaluations often decouple modeling from solving, rely on pre-formalized or text-only instances, and rarely test the full workflow from operational artifacts to validated decisions. In this work, we introduce ORAgentBench, an execution-grounded benchmark for evaluating autonomous agents on challenging end-to-end operations research tasks. It contains 107 human-reviewed tasks across diverse operational scenarios, each packaged in an isolated environment with a natural-language brief, multi-file data, configuration artifacts, and a required submission schema. Agents must write and run solution code, and their submissions are evaluated by hidden validators for schema validity, hard-constraint feasibility, and normalized objective quality. Experiments with fourteen frontier agent-model configurations show that current agents remain far from reliable OR practice. The best agent passes only 35.51% of all tasks and 20.59% of hard tasks, and many feasible submissions still fall below the required quality threshold. Failure analysis further shows that errors are dominated by strategic weaknesses, including missed operational rules, brittle formulations, weak feasible-solution construction, and insufficient solution improvement. OR-specific procedural skills increase hard-task feasibility, but do not reliably improve solution quality or pass rate. These results suggest that progress in OR agents requires moving beyond plausible optimization code toward dependable, high-quality operational decision-making.

08.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

09.
arXiv (CS.LG) 2026-06-18

A finite-element-inspired bipartite graph learned simulator for manufacturability assessment in large-deformation sheet forming

arXiv:2605.22845v2 Announce Type: replace-cross Abstract: Explicit dynamic finite element (FE) simulations are widely used for large deformation engineering analysis, but repeated simulations remain costly during design space exploration and optimisation. In explicit FE analysis, nodal kinematics and element level deformation measures evolve through coupled node element updates. This motivates graph learned simulators that approximate one step FE state transitions and roll them out autoregressively. However, many mesh based graph surrogates are node centred, which makes element level variables and native nodal elemental exchange less direct to represent. This work proposes CAttBiGNN, a cross attention based bipartite graph neural network for coupled nodal elemental learning. The graph represents FE mesh nodes and elements as distinct entities linked by directed node element edges, enabling nodal displacement increments and element level deformation states to be predicted on their native discretisation domains. An edge aware cross attention processor uses geometric edge embeddings to modulate directional node element message passing. For larger graphs, CAttBiUGNN combines the bipartite processor with graph downsampling and upsampling to improve long-range information propagation. The method is evaluated on dome shaped cold forming and corner shaped hot forming benchmarks. Comparisons with node centred baselines and bipartite and attention ablations show improved accuracy and balance in nodal displacement and elemental thinning prediction during autoregressive rollout. The results indicate that the proposed finite element inspired learned simulator can support manufacturability oriented field prediction and efficient design space exploration in large deformation sheet material forming.

10.
arXiv (CS.LG) 2026-06-18

Beyond Prediction: Tail-Aware Scheduling for LLM Inference

arXiv:2606.18431v1 Announce Type: new Abstract: LLM serving exhibits extreme length variability, making size-based scheduling difficult in practice. Recent LLM schedulers approximate SJF/SRPT using predicted decode lengths or ranks and primarily report mean-centric metrics such as TTFT and TBT. We show that these prediction-driven policies can be fragile under distribution shifts, bursty arrivals, and GPU memory pressure, while offering limited control over the tail latency (P90-P99) that dominates user experience, even with perfect decode-length knowledge. We introduce a distribution-aware, prediction-free scheduling framework that replaces explicit length prediction with soft priority boosting driven by lightweight statistical signals. Our design co-optimizes scheduling and cache-aware preemption to account for memory-coupled decode dynamics across workload mixes. Evaluated on production and open-source traces, our method reduces P99 TTLT by up to 35-50% relative to SRPT with perfect length knowledge and reduces TTFT by 34-47% across workloads, including reasoning-heavy and chat-heavy tasks. These results demonstrate a robust alternative for optimizing tail latency in online LLM serving.

11.
arXiv (CS.AI) 2026-06-18

Clin-JEPA: A Multi-Phase Co-Training Framework for Joint-Embedding Predictive Pretraining on EHR Patient Trajectories

arXiv:2605.10840v3 Announce Type: replace-cross Abstract: We present Clin-JEPA, a multi-phase co-training framework for joint-embedding predictive (JEPA) pretraining on EHR patient trajectories. JEPA architectures have enabled latent-space planning in robotics and high-quality representation learning in vision, but extending the paradigm to EHR data – to obtain a single backbone that simultaneously forecasts patient trajectories and serves diverse downstream risk-prediction tasks without per-task fine-tuning – remains an open challenge. Existing JEPA frameworks either discard the predictor after pretraining (I-JEPA, V-JEPA) or train it on a frozen pretrained encoder (V-JEPA 2-AC), leaving the encoder unaware of the rollout signal that the retained predictor must use at inference; co-training the encoder and predictor under a shared JEPA prediction objective would supply this grounding, but naïve co-training is unstable, with representation collapse and online/target drift causing autoregressive rollout to diverge. Clin-JEPA's five-phase pretraining curriculum – predictor warmup, joint refinement, EMA target alignment, hard sync, and predictor finalization – addresses each failure mode by phase, stably co-training a Qwen3-8B-based encoder and a 92M-parameter latent trajectory predictor. On MIMIC-IV ICU data, three independent evaluations support the framework: (1) latent $\ell_1$ rollout drift uniquely converges ($-$15.7%) over 48-hour horizons while baselines and ablations diverge (+3% to +4951%); (2) the encoder learns a clinically discriminative latent geometry (deteriorating-patient cohorts displace 4.83$\times$ further than stable patients in latent space, vs $\leq$2.62$\times$ for baseline encoders); (3) a single backbone outperforms strong tabular and sequence baselines on multi-task downstream evaluation. Clin-JEPA achieves mean AUROC 0.851 on ICareFM EEP and 0.883 on 8 binary risk tasks (+0.038 and +0.041 vs baseline average).

12.
arXiv (CS.CL) 2026-06-18

REVES: REvision and VErification–Augmented Training for Test-Time Scaling

Test-time scaling via sequential revision has emerged as a powerful paradigm for enhancing Large Language Model (LLM) reasoning. However, standard post-training methods primarily optimize single-shot objectives, creating a fundamental misalignment with multi-step inference dynamics. While recent work treats this as multi-turn reinforcement learning (RL), conventional approaches optimize over the multi-step trajectories directly, failing to further exploit the high-quality mistakes in intermediate steps that model can learn from correcting them. We propose a two-stage iterative framework that alternates between online data/prompt augmentation and policy optimization. By converting the intermediate steps (``near-miss'' answers) in the successful recovery trajectories into decoupled revision and verification prompts, our approach concentrates training on both effective answer transformation and error identification. This approach enables efficient off-policy data generation and reduces the computational overhead of long-horizon sampling compared to standard multi-turn RL. On LiveCodeBench, using publicly available test cases as feedback, we observe gains of +6.5 points over the RL baseline and +4.0 points over standard multi-turn training. Beyond coding, our approach matches the previously reported SOTA result on circle packing while using the smallest base model (4B) and far fewer rollouts than the much larger evolutionary search systems. Math results under ground-truth verification further confirm improved correction ability. It also generalizes to out-of-distribution constraint-satisfaction puzzles such as n\_queens and mini\_sudoku, where correctness is defined entirely by problem constraints. Code is available at https://github.com/yxliu02/REVES.git.

13.
arXiv (CS.CV) 2026-06-18

Conditional Latent Diffusion Model with Fourier-based Motion Modelling for Virtual Population Synthesis

In-silico trials of medical devices require the generation of virtual populations of anatomies. In cardiovascular applications, virtual anatomy is typically represented as a 3D+t mesh sampled from a generative model. However, most existing mesh generators focus on static anatomy, while sequence models often lack explicit periodicity. To this end, we propose 4D F-MeshLDM, a conditional generative framework comprising a convolutional mesh VAE to encode meshes, a structural latent space that parameterises motion using a truncated Fourier series, and a diffusion prior that learns the latent distribution over Fourier coefficient tokens. By conditioning the diffusion process on clinical covariates via affine modulation, we enable controllable synthesis. Sampling tokens and performing inverse Fourier synthesis yield cycle-consistent latent trajectories, which can be decoded into 3D+t cardiac mesh sequences. Experiments on 5,000 UK Biobank subjects demonstrate that 4D F-MeshLDM outperforms state-of-the-art baselines in anatomical fidelity and achieves near-zero cycle closure error. Furthermore, the generated cohorts accurately preserve clinical functional indices, highlighting the potential of our framework for reliable in-silico cardiac trials.

14.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

15.
arXiv (CS.AI) 2026-06-17

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

arXiv:2606.18023v1 Announce Type: cross Abstract: Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain–cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain–cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

16.
arXiv (CS.AI) 2026-06-17

FinAcumen: Financial Multimodal Reasoning via Self-Evolving Experience Memory Harness

arXiv:2606.17642v1 Announce Type: new Abstract: Financial multimodal reasoning requires agents to coordinate numerical computation, retrieval, visual interpretation, and temporal grounding across heterogeneous evidence sources. Existing tool-augmented agents improve execution fidelity, yet remain largely stateless across episodes, repeatedly rediscovering reasoning strategies and failure patterns. In high-stakes financial settings, this leads to unreliable tool routing, noisy retrieval, and hallucination-prone reasoning. We present FinAcumen, a financial reasoning agent framework centered on selective experience memory for tool-augmented multimodal reasoning. FinAcumen accumulates financially grounded reasoning experience from prior trajectories, distilling successful strategies and failure-derived cautionary rules into a persistent memory bank. During inference, retrieved experiences condition reasoning only when semantic relevance exceeds a calibrated threshold, while irrelevant memory is explicitly suppressed through a fallback mechanism. A deterministic financial tool environment further grounds numerical computation, retrieval, visual decoding, and answer verification.Across four financial multimodal reasoning benchmarks, FinAcumen consistently improves a frozen 8B vision-language model over finance-specialized models and approaches leading proprietary general-purpose models. Further analysis shows that selective experience activation improves reasoning reliability under retrieval uncertainty. Our code is anonymously available at https://anonymous.4open.science/r/FinAcumen

17.
arXiv (CS.CV) 2026-06-17

Looped World Models

Current world models face a fundamental tension: faithful long-horizon simulation demands deep computation, but deeper models are expensive to deploy and prone to compounding errors. We resolve this by introducing Looped World Models (LoopWM), which are the first looped architectures for world modelling. Our method iteratively refines latent environment states through a parameter-shared transformer block. This yield up to 100x parameter efficiency over conventional approaches with adaptive computation that automatically scales depth to match the complexity of each prediction step. Orthogonal to scaling model size and training data, LoopWM establishes iterative latent depth as a new scaling axis for world simulation, which might significantly push the community forward.

18.
arXiv (CS.CV) 2026-06-17

TerraTransfer: Learning End-to-End Driving Policies Without Expert Demonstrations

End-to-end autonomous driving has achieved state-of-the-art performance on benchmarks and real-world deployments. Its standard training recipe, however, is expensive across all stages: collecting and labeling millions of driving frames is costly, and closed-loop RL on images is bottlenecked by the per-step cost of photorealistic rendering plus a forward pass through a large vision backbone. Self-play in vectorized simulators changes the economics: millions of rollout steps per second, and a state distribution naturally rich in collisions, near-misses, and recoveries that no driving log contains. Our approach exploits this asymmetry by decoupling learning to drive from learning to see. We pretrain a single policy by self-play, then align its latent space with a pretrained vision backbone, through the action KL divergence and a batch-relational low-rank structural loss. The action target comes from the self-play policy, so alignment never supervises against a logged trajectory: a paired dataset of (image, scene-state) frames suffices, with no need for the curated expert demonstrations that imitation pretraining is built on. On photorealistic 3D Gaussian splatting closed-loop scenarios, the resulting end-to-end policy matches or exceeds prior end-to-end methods.

19.
arXiv (CS.LG) 2026-06-16

Unlocking Latent Dimensions: Exploring Representations of Large-Scale X-ray Scattering Data using Variational Autoencoders

arXiv:2606.14999v1 Announce Type: new Abstract: Scientific user facilities generate X-ray scattering data faster than traditional workflows can process them. We address this challenge across two settings, offline dataset exploration and live on-the-fly analysis. We train a domain-specific attention-based Convolutional Variational Autoencoder (C-VAE) on 1.5 million X-ray scattering images to learn low-dimensional representations capturing structural variation across diverse experimental conditions. The learned latent space reveals well-organized clusters and smooth trajectories reflecting experimental progression. It further supports controlled synthetic scattering image generation across diverse structural states. When deployed without retraining, the model organizes time-resolved film formation experiments at two synchrotron facilities into interpretable latent structures. Benchmarking against DINOv3 (ViT-7B), a general-purpose vision foundation model, demonstrates that domain-specific training yields more interpretable latent organization for scattering data. Both workflows are integrated within Latent Space Explorer, a component of the MLExchange platform, supporting interactive structural exploration across archived datasets and live experiments.

20.
arXiv (quant-ph) 2026-06-16

Neural network inverse design of nanophotonic scintillators

arXiv:2606.16309v1 Announce Type: cross Abstract: Scintillators are materials converting high-energy radiation into optical light, essential in a range of technologies such as medical imaging systems and security scanners. Scintillator development and optimization have remained limited by the complexity of their underlying physics, involving stochastic cascades of electron-electron, electron-phonon, and electron-photon interactions. Such processes are typically modeled by non-differentiable Monte Carlo simulations, limiting the applicability of machine learning for scintillator development. Here we present a physics-informed neural network that learns the scintillation cascade process from the incident high-energy particle to photon emission, substantially accelerating scintillator design and optimization. Combining this neural network with photonic simulations enables end-to-end differentiable optimization of the scintillator geometry. This allows us to optimize for arbitrary figures of merit, such as specific target emission patterns.. We demonstrate the concept and characterize it relative to previous approaches by inverse design of nanophotonic scintillators for X-ray imaging.

21.
arXiv (CS.AI) 2026-06-16

RollArt: Disaggregated Multi-Task Agentic RL Training at Scale

arXiv:2512.22560v2 Announce Type: replace-cross Abstract: Agentic Reinforcement Learning (RL) trains LLMs through multi-turn interactions with environments, producing workloads that mix compute-bound prefill, bandwidth-bound decoding, CPU-heavy environment execution, and bursty reward evaluation. Existing systems either colocate all stages on a single GPU cluster or decouple them only at a coarse granularity, overlooking hardware heterogeneity and incurring substantial synchronization overhead across stages. We present ROLLART, a system for multi-task agentic RL on disaggregated infrastructure. ROLLART maps each pipeline stage to best-fit hardware, routing prefill-heavy tasks to compute-optimized GPUs, decode-heavy tasks to bandwidth-optimized GPUs, and environments to CPU clusters. It decouples rollout at the trajectory level, allowing generation, environment interaction, and reward scoring to proceed independently, so that slow or failed environments never block the others. ROLLART offloads stateless reward computation to serverless infrastructure and overlaps rollout with training via staleness-bounded asynchronous weight synchronization. Our results demonstrate that ROLLART effectively improves training throughput and achieves 1.31–2.05 \(\times\) training time reduction compared to various RL systems. We also evaluated ROLLART by training a hundreds-of-billions-parameter MoE model for Qoder product on an Alibaba cluster with above 3,000 GPUs, demonstrating its stability and scalability.

22.
arXiv (CS.AI) 2026-06-16

SkillsBench: Benchmarking How Well Agent Skills Work Across Diverse Tasks

arXiv:2602.12670v4 Announce Type: replace Abstract: Agent Skills are structured packages of procedural knowledge that augment large language model (LLM) agents at inference time. Despite rapid adoption, there is no standard way to measure whether they actually help. We present SkillsBench, a benchmark whose current inventory contains 87 tasks across 8 domains paired with curated Skills and deterministic verifiers. Our latest aggregate evaluation runs the 87-task benchmark under matched no-Skills and curated-Skills conditions for 18 model-harness configurations. Curated Skills raise the average pass rate from 33.9% to 50.5% (+16.6 percentage points; 25.5% normalized gain), with configuration-level gains ranging from +4.1 to +25.7 pp. Focused Skills with at most three modules outperform larger or exhaustive bundles, and smaller models with Skills can match larger models without them. SkillsBench establishes paired evaluation as the foundation for rigorous measurement of Skill efficacy on agentic, expertise-heavy work.

23.
arXiv (CS.AI) 2026-06-16

A comparative and critical study of EEGNet for fNIRS-driven cognitive load classification

arXiv:2606.16160v1 Announce Type: cross Abstract: Accurately classifying cognitive load from functional near-infrared spectroscopy (fNIRS) signals remains a significant challenge due to temporal variability, inter-subject differences, and sensitivity to preprocessing choices. This study provides a comprehensive evaluation of EEGNet for fNIRS-based cognitive load classification by systematically examining the effects of temporal segmentation strategies (overlapping vs. non-overlapping), window lengths (10s, 20s, 30s), feature extraction methods (Analysis of Variance (ANOVA), Principal Component Analysis (PCA), Fast Independent Component Analysis (FastICA)), learning rate configurations (fixed and adaptive), and evaluation protocols (random split vs. subject-independent (SI)). Results from random-split experiments show that overlapping segmentation, combined with smaller fixed learning rates (0.01-0.001), yields the highest accuracies, due to temporal redundancy and dense sampling of hemodynamic transitions. However, SI evaluation reveals a substantial drop in accuracy, demonstrating limited generalization to unseen participants. Under SI evaluation, non-overlapping segmentation outperformed overlapping windows, with the best accuracy of 56.11% achieved using PCA features with a 20-second window and a 0.1 learning rate. These findings indicate that eliminating temporal redundancy helps the model learn more robust and generalizable representations of cognitive load across individuals. Although adaptive learning rate strategy improved training stability, it did not surpass the performance of optimally selected fixed learning rates. The study highlights the critical role of segmentation strategy and learning rate selection in improving model generalization and identifies methodological considerations essential for developing reliable, real-time, and SI cognitive load classification systems using fNIRS.

24.
arXiv (CS.AI) 2026-06-16

StarOR: Synergizing Tree Search and Test-Time Reinforcement Learning for Optimization Modeling

arXiv:2606.15197v1 Announce Type: cross Abstract: Optimization modeling is inherently hierarchical, requiring a precise sequence of symbolic commitments. Traditional learning-based automated optimization modeling methods improve modeling policies through large-scale annotated or curated training data, but are costly to adapt to new problem distributions. Meanwhile, one-shot generation remains brittle in hierarchical modeling, where early symbolic errors can propagate into invalid formulations. Test-time scaling offers a promising alternative by enabling structural exploration with additional instance-level computation; however, existing search-based methods typically rely on a fixed policy, causing repeated rollouts to inherit similar modeling biases and providing limited credit assignment for intermediate decisions. To address these limitations, we propose StarOR, a synergistic search-and-adaptation framework that couples MCTS with Test-Time Reinforcement Learning for optimization modeling. StarOR decomposes the modeling process into four stages and updates a transient LoRA adapter via GRPO at each non-terminal node. By using MCTS-generated siblings as local comparison sets, StarOR transforms search-time exploration into instance-specific policy refinement. Moreover, an unsupervised multi-faceted reward system provides fine-grained feedback for intermediate formulation decisions without ground-truth labels. Experiments across five optimization benchmarks show that StarOR achieves state-of-the-art performance even with a 4B backbone, outperforming existing methods and the frontier LLMs.

25.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.