×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Qi Shao ×
Shuffle
01.
arXiv (CS.CL) 2026-06-18

Are LLMs Ready to Assist Physicians? PhysAssistBench for Interactive Doctor-Patient-EHR Assistance

The most plausible near-term role of medical LLMs is to assist rather than replace physicians, yet current evaluations often test isolated capabilities: clinical knowledge, EHR system interaction, or patient communication. Physician assistance instead requires coordinating these capabilities within the same interaction, where physicians issue underspecified requests, patients describe symptoms ambiguously, and EHR systems demand precise tool use. We introduce PhysAssistBench, a benchmark for interactive doctor-patient-EHR assistance. Built from real MIMIC-IV cases, PhysAssistBench uses a scalable pipeline to construct agentic patients: interactive, record-grounded agents that turn static EHR records into multi-turn clinical scenarios while preserving clinical factuality. PhysAssistBench provides a curated bilingual evaluation set of 1,296 manually reviewed and physician-validated turns. Experiments with leading LLMs show that current models remain unreliable in this setting, which exposes a key bottleneck for clinical LLMs: reliable assistance requires coordination across knowledge, communication, and systems, not isolated gains in any of them.

02.
arXiv (quant-ph) 2026-06-24

Doppler-enhanced superheterodyne Rydberg microwave receiver

arXiv:2606.24247v1 Announce Type: cross Abstract: We report the enhanced sensitivity of the Rydberg microwave (MW) receiver by exploiting the Doppler effect in a vapor cell. A two-photon Rydberg ladder scheme is implemented via the co-propagation of probe and coupling lasers, which enhances the Doppler effect. When an MW field is applied, microwave dressing modifies the velocity-dependent resonance condition, enabling stronger contributions from atoms with non-zero velocities and leading to an enhancement of the EIT transmission. Based on this mechanism, we achieve a sensitivity of $35.1\ \mathrm{nV\ cm^{-1}\ Hz^{-1/2}}$ using the heterodyne technique, which is 1.5 times better than that obtained in the counter-propagating configuration. Meanwhile, the required local oscillator (LO) field is reduced by a factor of 17.6 compared with the counter-propagating configuration, which is advantageous for applications requiring minimal radiation and low power consumption. Moreover, the co-propagating configuration is more amenable to integration or portable sensing platforms because multiple laser fields can be delivered through a single optical fiber.

03.
arXiv (CS.CV) 2026-06-25

A welding penetration prediction model for laser welding process based on self-supervised learning using physics-informed neural networks

The laser welding full-penetration is of critical importance, as it constitutes one of the fundamental factors in achieving defect-free welded joints. Accurate prediction of the penetration state is therefore essential for ensuring weld quality. To this end, this paper introduces SimPhysNet, a novel algorithm that achieves high classification accuracy in laser welding penetration prediction using only a limited number of labelled images. This approach effectively overcomes the limitations of supervised learning classification algorithms, which are hindered in industrial applications by their dependence on extensive, high-quality labelled data. The core of SimPhysNet is a unique self-supervised learning paradigm that embeds physical priors into a contrastive learning framework. By incorporating a physics-informed neural network (PINN), the model is guided to extract physically meaningful features of the molten pool and keyhole from a large set of unlabelled data, while three image augmentation tasks further enhance its generalization capabilities. Subsequently, a few-shot learning strategy, based on prototypical networks, enables robust classification by constructing class representations from a minimal set of labelled images. Experimental results demonstrate that SimPhysNet achieves a classification accuracy of 96.06% using only 200 labelled images (approximately 5% of the total labelled dataset), which is comparable to the performance of conventional supervised learning algorithms that utilize the entire labelled dataset. This work presents a new, efficient, and highly accurate method, providing the way for the intelligent automation of laser welding.

04.
arXiv (CS.AI) 2026-06-16

CAP: Towards PPG Universal Representation Learning with Patient-level Supervision

arXiv:2606.15284v1 Announce Type: cross Abstract: Photoplethysmography (PPG) plays a central role in wearable health monitoring and clinical decision support. Yet existing approaches to universal PPG representation learning largely focus on signal-level objectives and often overlook patient-level health context, which limits generalization to complex clinical tasks and heterogeneous cohorts. To address this gap, we construct a large-scale paired PPG-EHR multimodal dataset by distilling fragmented medical histories and clinical records into cohesive, patient-level electronic health records (EHR). Building on this resource, we propose Clinical Anchored Pretraining for PPG (CAP). During pretraining, CAP performs cross-modal contrastive alignment that anchors PPG representations to patient-level clinical semantics, guiding the encoder beyond waveform fitting toward modeling consistency in a patient's overall physiological state. During downstream adaptation, the pretrained PPG encoder provides clinically grounded representations that strengthen inductive bias and improve robustness and transferability. Experiments demonstrate that CAP consistently outperforms strong baselines on four diverse downstream tasks. CAP achieves a particularly large gain on respiratory rate prediction (up to +87.6% relative improvement over the state-of-the-art baseline) and delivers an average relative +26.7% across all tasks. We further enhance the interpretability of our approach through comprehensive analyses, including ablations and multiple complementary visualizations of the learned representations. The code for our experiments is available at: https://github.com/gody123gody/CAP .

05.
arXiv (CS.CL) 2026-06-17

MedicalAgentsBench for Complex Medical Reasoning: Comparing Internalized Reasoning Models versus Externalized Agent-based Frameworks

Complex medical reasoning requires integrating heterogeneous clinical evidence across multiple inference steps. Large language models (LLMs) now approach this through two routes: internalized reasoning and externalized agent scaffolding (frameworks that decompose problems collaboratively amongst multiple LLMs). To determine whether these routes are exclusive or complementary, we introduce MedicalAgentsBench, a filtered benchmark of 862 complex clinical questions drawn from the union of eight medical datasets via difficulty-aware curation and contamination screening. Evaluating three internalized reasoning models (DeepSeek-R1, o1-mini, and o3-mini), seven base models, and nine externalized agent-based methods, we find that internalized and externalized approaches each independently improve performance, and that their benefits compound: the highest accuracy is achieved by layering agent workflows onto an internalized reasoning model (i.e., o3-mini + MDAgents with 35.1%). Pareto analysis shows this combination dominates the cost-performance frontier; moreover, lightweight optimization on inexpensive models offers an entry point for resource-constrained settings. Our benchmark is at https://github.com/gersteinlab/MedicalAgentsBench.

06.
arXiv (CS.CL) 2026-06-18

CoreMem: Riemannian Retrieval and Fisher-Guided Distillation for Long-Term Memory in Dialogue Agents

Personalized dialogue agents require continuous long-term memory to maintain coherent interactions across multiple sessions. However, deploying these capabilities on consumer-grade hardware (e.g., 8 GB VRAM edge devices) introduces severe memory and compute bottlenecks. Existing systems typically rely on isotropic cosine similarity for retrieval and heuristic rules for context compression. These approaches lack a unified theoretical foundation, frequently suffering from the hubness problem in high-dimensional retrieval and syntactic fragmentation during compression. To overcome these limitations, we propose CoreMem, a resource-efficient edge-cloud memory architecture fundamentally unified by information geometry. First, Riemannian retrieval replaces cosine matching with a locally adaptive Fisher-Rao metric, effectively penalizing hub memories via Mahalanobis distance with O(Ndr) Woodbury acceleration for real-time search. Second, Fisher-guided discrete token distillation (FDTD) introduces a hierarchical sentence-to-token compression mechanism. It derives sensitivity scores from Fisher information traces, providing a principled compression-KL tradeoff augmented with explicit structural syntax protection. Evaluated on the LOCOMO and LongMemEval-S benchmarks, CoreMem achieves strong accuracy improvements, yielding substantial gains in Open-domain (+4.51 pp) and Temporal (+4.17 pp) reasoning. Extensive profiling confirms that CoreMem operates seamlessly within a strict 8 GB VRAM budget, successfully bridging the gap between resource-constrained edge devices and the demand for theoretically grounded, lifelong memory agents.

07.
arXiv (CS.CV) 2026-06-16

GraphBEV++: Multi-Modal Feature Alignment for Autonomous Driving

Feature misalignment in BEV perception is a critical yet often overlooked challenge in autonomous driving, especially under calibration uncertainties between LiDAR and camera sensors. To address this issue, we propose a robust multi-modal fusion framework, GraphBEV++, which systematically mitigates projection-induced misalignment. The framework consists of two key modules: LocalAlign-v2 and GlobalAlign-v2. LocalAlign-v2 introduces neighborhood-aware depth features via graph matching to correct local misalignment. It supports both LSS-based and query-based BEV representations, making it compatible with BEVFusion and BEVFormer architectures for consistent cross-paradigm alignment. GlobalAlign-v2 encompasses two variants: Deformable and Diffusion. The Deformable variant addresses global misalignment in LSS-based multi-modal BEV by explicitly learning cross-modal feature offsets. In contrast, the Diffusion variant targets implicit misalignment in query-based BEV by injecting noise to simulate misalignment and employing a denoising process to recover aligned features. Experimental results show that GraphBEV++ achieves state-of-the-art performance under misalignment noise on nuScenes and Waymo subset, improves long-range detection on Argoverse2, and generalizes effectively to the 3D occupancy prediction task, consistently improving occupancy estimation accuracy and robustness under both clean and noisy settings. Furthermore, GraphBEV++ effectively alleviates misalignment issues in end-to-end autonomous driving. Compared with five baselines (UniAD, VAD, FusionAD, MomAD, and WoTE), it demonstrates superior performance in both open-loop (nuScenes) and closed-loop (Bench2Drive and NAVSIM) evaluations across perception, prediction, and planning tasks.

08.
arXiv (CS.AI) 2026-06-11

From Uniform to Learned Graph Priors: Diffusion for Structure Discovery

arXiv:2606.11831v1 Announce Type: cross Abstract: Neural relational inference (NRI) methods discover interaction graphs from trajectories through variational reasoning on discrete potential edges. However, these methods typically rely on oversimplified, factorized graph priors. Such priors, typically nearing uniform distributions, treat edges as independent entities. This systemic misalignment does not match the real-world systems and yields diffuse and indecisive edge posteriors limiting the reliability of structural discovery. To address this, we propose Diff-prior, a diffusion-parameterized adaptive prior used to calibrate latent graph distribution rather than generate graphs. Our core insight is to reframe prior integration as a learnable denoising-style calibration that organizes scattered, uncertain edge posteriors into a more reliable overall structure which can be trained by the diffusion model. Diff-prior learns an adaptive structure prior that performs structured calibration on the edge posteriors during inference, guiding it towards a distribution closer to the underlying structure. The diff-prior operates before structural sampling and acts as a denoising calibrator directly on the encoder edge distribution, which provides a generic training paradigm over structured variables. Experiments on standard benchmarks validated our framework, and the results indicate that Diff-prior improves the performance of structure inference and generates more decisive edge posteriors across multiple NRI-family architectures. The code is available on https://github.com/Hardy158118/Diffprior.

09.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

10.
arXiv (CS.CL) 2026-06-16

Understanding, Detecting, and Repairing Real-World In-Context-Learning-Based Text-to-SQL Errors

Large language models (LLMs) have been adopted for text-to-SQL tasks, utilizing their in-context learning (ICL) capability to translate natural language questions into SQL queries. However, such a technique faces correctness problems. In this paper, we conduct the first comprehensive study of text-to-SQL errors of ICL-based techniques. Our study covers four representative ICL-based techniques, five basic repairing methods, two benchmarks, and two LLM settings. We find that text-to-SQL errors are widespread and summarize 27 error types of 7 categories. We also find that existing repairing attempts have limited correctness improvement while having high computational overhead and many mis-repairs. Based on these findings, we propose MapleDoctor, a novel text-to-SQL error detection and repairing framework. The evaluation demonstrates that MapleDoctor outperforms existing solutions by repairing 13.8% more queries with a negligible number of mis-repairs and reducing 67.4% repair latency. The artifact is publicly available at GitHub.

11.
arXiv (CS.AI) 2026-06-12

Benchmarking AI Agents for Addressing Scientific Challenges Across Scales

arXiv:2606.12736v1 Announce Type: new Abstract: AI agents are increasingly being developed to accelerate scientific discovery, yet their practical capabilities in real research settings remain poorly understood. Existing benchmarks for AI agents rarely capture the complexity, heterogeneity, and extended reasoning required by scientific work, whereas benchmarks for scientific tasks often reduce research to static, direct problems and provide limited support for interactive evaluation. Here, we introduce SciAgentArena, a systematic benchmark for evaluating AI agents in real-world scientific research scenarios drawn from emerging needs across multiple domains. SciAgentArena comprises approximately 200 tasks with stepwise verification and an interactive, agent-agnostic environment for assessing diverse AI agents. Using this benchmark, we find that current agents can contribute effectively to well-specified data-analysis workflows, particularly when the task structure and evaluation criteria are clear. However, their performance remains uneven across scientific contexts: agents struggle to generate genuinely novel insights, sustain self-directed exploration, and formulate robust solutions for open-ended research questions. We further characterize common failure modes across agents and identify opportunities for improving their reliability, autonomy, and scientific reasoning. Together, SciAgentArena provides a practical framework for measuring progress in AI agents for science and for guiding the design of future agents capable of addressing complex scientific challenges. Full codes, tasks, and datasets can be accessed via this link: https://sciagentarena.github.io/.

12.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

13.
arXiv (CS.CV) 2026-06-18

Data-Forcing Distillation: Restoring Diversity and Fidelity in Few-Step Video Generation

Recent progress has shown promise in distilling multi-step video diffusion models into efficient few-step students. Among them, Distribution Matching Distillation (DMD) and its successor DMD2 achieved strong generation quality and fast convergence. However, due to the nature of the reverse Kullback–Leibler (KL) objective, these methods exhibit two persistent failure modes: a substantial drop in sample diversity, and visibly over-saturated outputs that deviate from real-video appearance. In this work, we propose Data-Forcing Distillation (DFD), a simple post-training framework that restores diversity and fidelity in DMD with only a single-line of code change. At its core is the teacher score discrepancy to guide the student toward the real-data distribution, pulling it to missing modes (mitigating mode collapse) and away from problematic modes absent in real data (avoiding over-saturation). We provide an in-depth theoretical analysis of our framework and validate our approach on text-to-video, image-to-video, and autoregressive video generation. With only 100–300 steps of finetuning, DFD effectively restores diversity and fidelity on both Wan2.1-1.3B and Cosmos-Predict2.5-2B model, resolving the over-saturation artifacts with significantly better video dynamics and appearance, and even outperforms the teacher model.

14.
arXiv (CS.AI) 2026-06-11

Architecture-Aware Reinforcement Learning Makes Sliding-Window Attention Competitive in Math Reasoning

arXiv:2606.11634v1 Announce Type: new Abstract: The rapid progress of reasoning and agentic large language models (LLMs) has increased the demand for long-context inference, but self-attention (SA) scales quadratically with context length. To address this, we study SWARR (Sliding-Window Attention with Reinforced Adaptation for Math Reasoning), a practical recipe for adapting SWA models to mathematical reasoning. SWARR has two stages: (1) efficient conversion from a pretrained SA model to SWA with supervised fine-tuning (SFT), which avoids pretraining a new base model, and (2) policy adaptation with reinforcement learning (RL). We find that SWA still underperforms SA after SFT, and we hypothesize that this gap is caused in part by a data-architecture mismatch: most SFT data are prepared for SA models and may contain long-range dependencies that are difficult for SWA to model. Because on-policy RL optimizes self-generated trajectories under the SWA constraint, it can adapt trajectories to better match SWA. Experiments on mathematical reasoning benchmarks show that this recipe substantially narrows the gap between SWA and SA, recovering much of the accuracy lost during SWA conversion while preserving the efficiency benefits of linear-complexity attention. Our central contribution is the empirical finding that RL changes the conclusion one would draw from conversion and SFT alone about SWA's viability for math reasoning.

15.
arXiv (CS.CV) 2026-06-17

MaineCoon: Pursuing A Real-Time Audio-Visual Social World Model

As an increasing majority of global video content is consumed on social platforms for interactive social purposes, video generation models built for social worlds are important but largely overlooked by previous studies. In this work, we define the position of social world models and build a prototype model as the first step towards this goal. While previous world models successfully simulate physical environments or gaming world exploration, they remain fundamentally detached from human-centric social dynamics. To bridge this gap as the first step to social world models, we present MaineCoon, the first real-time audio-visual autoregressive model that has 22B parameters and is capable of real-time streaming generation and sub-second interaction, with a record-breaking frame rate of up to 47.5 FPS, on a single GPU. To the best of our knowledge, MaineCoon is also the first real-time audio-visual generation model specifically optimized for social-interactive applications. To enable efficient and stable training, we introduce several novel techniques into MaineCoon, including self-resampling, cross-modal representation alignment, domain-aware preference optimization, and reinforced online-policy distillation (ROPD). We also design the first agentic streaming inference framework that supports thousand-second-scale or even longer generation while mitigating drift with agentic cache management and prompt planing. These innovations significantly accelerate training while optimizing real-time inference performance. We believe this work not only sets a new state-of-the-art (SOTA) performance benchmark for high-quality, low-latency, and long-horizon audio-visual autoregressive models, but also points out the paradigm shift desired for next-generation AI-native social platforms.

16.
arXiv (CS.CL) 2026-06-24

On the Stability of Prompt Ranking in Large Language Model Evaluation

Prompt-based interaction has become a dominant paradigm for using large language models (LLMs), where multiple candidate prompts are evaluated and the top-ranked one is selected for downstream use. This workflow implicitly assumes that prompt rankings are stable under minor variations in evaluation conditions. In this paper, we systematically study prompt ranking stability under common sources of variability, including random seeds and limited evaluation subsets. Across three open-weight LLMs and two benchmark tasks, we find that while overall rank correlations are often moderate to high, the identity of the top-performing prompt frequently changes, leading to unreliable selection decisions. To address this issue, we propose a simple stability-aware selection strategy based on a lower confidence bound, which accounts for both performance and variance. Our results show that this approach improves robustness in unstable settings while remaining competitive in more stable regimes. These findings highlight the importance of accounting for evaluation uncertainty in prompt selection and LLM benchmarking.

17.
arXiv (CS.LG) 2026-06-25

Towards Robust EEG Decoding Based on Riemannian Self-Attention

arXiv:2606.25456v1 Announce Type: new Abstract: Brain-Computer Interface (BCI) based on electroencephalography (EEG) enables direct interaction between the brain and external environments and has significant applications in assistive technologies, medical rehabilitation, and entertainment. Recently, EEG decoding methods based on Symmetric Positive Definite (SPD) learning have demonstrated superior performance. However, these methods typically employ basic network architectures and do not explicitly capture local relationships between EEG signals. This limitation is problematic for EEG signals due to their inherently low Signal-to-Noise Ratio (SNR). Moreover, most existing Riemannian manifold-based methods are restricted to specific metrics. The most widely used is the Affine-Invariant Metric (AIM). However, it has a quadratic dependency on the SPD matrices and cannot handle ill-conditioned SPD matrices, which hinders the effectiveness of networks. In contrast, the Bures-Wasserstein Metric (BWM) exhibits linear dependence on SPD matrices and demonstrates superior performance for ill conditioning. To overcome these challenges, we propose a Riemannian self-attention network based on the BWM. Additionally, the recently introduced power-deformed generalized Bures-Wasserstein metric reveals a nonlinear relationship between SPD matrices and matrix power deformation. This metric provides a more nuanced representation of the geometric structure of the SPD manifold. Consequently, we extend our model to a learnable version. For simplicity, we refer to it as GBWAtt. Experimental results on three EEG benchmarking datasets validate the robustness and effectiveness of our proposed method. The code is available at https://github.com/jissc/GBWAtt.

18.
arXiv (CS.AI) 2026-06-24

Accelerating Disaggregated RL for Visual Generative LLMs with Diffusion-Based Parallelism and Trainer-Assisted Generation

arXiv:2606.24369v1 Announce Type: new Abstract: Reinforcement learning (RL) has become a dominant post-training paradigm, driving the emergence of high-performance RL systems such as veRL for autoregressive large language models (LLMs). In parallel, diffusion-oriented RL algorithms, e.g., DanceGRPO and FlowGRPO, have rapidly expanded the scope of RL from language reasoning to diffusion-based visual and flow-based generation. However, efficient RL systems for diffusion generative LLMs remain underexplored. Existing implementations, e.g., veRL-Omni, still rely on colocated execution, which simplifies synchronization but couples rollout and training resources, limits heterogeneous deployment, and constrains independent scaling. To this end, we introduce DigenRL, a disaggregated RL framework for diffusion-based generative LLMs that supports flexible resource allocation, accommodates heterogeneous GPUs, and facilitates efficient task scheduling. To maximally reduce the execution bubbles in the disaggregated architecture, we propose: 1) a generation-axis pipeline (GAP) and time-step parallelism (TSP) in the diffusion architecture to enable finer-grained pipelining between rollout and training; 2) an elastic trainer-assisted generation (TAG) approach to enable the trainer GPU resources to dynamically assist in executing rollout generations; and 3) a tightly one-step constrained asynchronous strategy to further utilize the tail bubble in the pipeline. Extensive experiments are conducted on three hardware testbeds with 16-32 GPUs using HunyuanVideo-13B, Wan2.1-14B, FLUX.1-12B, and QwenImage-20B generative models. Experimental results show that DigenRL achieves 1.56-2.10x throughput improvements over state-of-the-art diffusion RL systems, veRL-Omni and GenRL.

19.
arXiv (CS.LG) 2026-06-17

Weisfeiler Lehman Test on Combinatorial Complexes: Generalized Expressive Power of Topological Neural Networks

arXiv:2605.00725v2 Announce Type: replace Abstract: Topological neural networks have emerged as effective tools for modeling higher-order relational structures beyond pairwise graphs, including hypergraphs, simplicial complexes, and cell complexes. However, existing Weisfeiler-Leman type expressivity analyses are typically developed on different structural domains and rely on domain-specific neighborhood systems, making their expressive powers difficult to compare within a common formalism. In this paper, we introduce the Combinatorial Complex Weisfeiler-Leman (CCWL) framework, a unified expressive power refinement defined on combinatorial complexes. By exploiting the ability of combinatorial complexes to represent both set-type relations and part-whole hierarchies, CCWL performs topological color refinement through four structural neighborhoods: boundary, co-boundary, lower adjacency, and upper adjacency. We show that, under specified lifting maps, CCWL can simulate several domain-specific WL-type refinements, thereby providing a common theoretical baseline for analyzing topological message passing. We further study the neighborhood sufficiency problem and prove that, under explicit coverage conditions, a reduced refinement using only lower- and upper-adjacent bridge information preserves the distinguishing power of the full four-neighborhood CCWL refinement. Guided by this theoretical result, we instantiate the reduced refinement as the Combinatorial Complex Isomorphism Network (CCIN). Experiments on synthetic and real-world benchmarks demonstrate that CCIN achieves competitive performance against representative graph and topological neural network baselines. Ablation studies and resource-efficiency analyses further support the effectiveness of the proposed lower/upper-neighborhood design.

20.
arXiv (CS.AI) 2026-06-19

Data Standards for Humanoid Robotics: The Missing Infrastructure for Physical AI

arXiv:2606.19769v1 Announce Type: cross Abstract: The scalability of humanoid robots will depend not only on models and hardware, but also on whether physical experience can accumulate across robots, tasks, organizations, and time. Drawing on the authors' work in developing ISO/WD 26264-1, Humanoid robot datasets – Part 1: General requirements, within ISO/TC 299/WG 16, this article argues that data standards are becoming foundational infrastructure for Physical AI. We develop three insights. First, humanoid robot data is embodied interaction data, not a collection of isolated digital samples; a useful dataset must preserve the relationship among robot body, action, task, scene, execution trace, and outcome. Second, its value depends on physical coherence: multimodal streams are reusable only when timing, coordinate frames, calibration, kinematics, units, and synchronization assumptions remain inspectable. Third, the main bottleneck is not only data scarcity, but non-cumulative data caused by high collection costs, data silos, and inconsistent evaluation. We argue that humanoid robot data standards address these bottlenecks by making embodied experience interpretable, shareable, traceable, and reusable. A general standard should provide horizontal infrastructure for lifecycle management, metadata, provenance, quality, versioning, and traceability, while capability-specific parts should define domain grammar for manipulation, locomotion, human-robot interaction, cognition, and future humanoid capabilities. As AI moves from screens into bodies, data standards must evolve from organizing digital information to structuring physical interaction.

21.
arXiv (CS.CL) 2026-06-11

ChartFI: Benchmarking Faithfulness and Insightfulness of Chart Descriptions from Multimodal Large Language Models

Chart descriptions are essential for accessibility, cross-modal retrieval, and assisting readers in extracting insights from complex visualizations. As multimodal large language models (MLLMs) are increasingly adopted for automated chart description generation, a critical question arises: how faithfully and insightfully do these models actually describe charts? Current benchmarks fall short on two fronts: existing datasets consist of simple, homogeneous charts paired with shallow, fact-enumerating descriptions; and prevailing metrics fail to capture the multi-faceted nature of description quality. To address these gaps, we present the Chart Faithfulness and Insightfulness Benchmark (ChartFI-Bench). We first summarize four dimensions that characterize high-quality chart descriptions: factual accuracy, salient feature emphasis, domain-informed guidance, and chart-text complementarity. Guided by these dimensions, we construct a high-quality benchmark comprising 896 chart-description pairs, which feature visually complex charts and semantically rich descriptions. Furthermore, we design four aligned evaluation metrics – Faithfulness, Coverage, Informativeness, and Acuity – to systematically assess the quality of descriptions across these dimensions. Experiments conducted on mainstream MLLMs demonstrate the effectiveness of the proposed framework and reveal common weaknesses among existing models.

22.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

23.
arXiv (CS.CV) 2026-06-16

EmoZone-Talker: Regional Semantic Control of Audio-Driven 3DGS Talking Heads via Facial Action Units

3D Gaussian Splatting (3DGS) has shown strong potential for high-fidelity talking head synthesis. However, enabling fine-grained, interpretable, and editable facial expression control remains fundamentally challenging due to intrinsic conflicts between speech-driven facial dynamics and explicit expression signals. Existing methods rely on implicit multimodal fusion, leading to spatial entanglement and temporal instability. We present EmoZone-Talker, a novel framework that reformulates audio-driven facial animation as a structured spatial-temporal coordination problem under cross-modal conflicts. Our approach introduces an explicit spatial disentanglement and temporal dynamics modeling of facial motion. Specifically, we propose Synergy Zones with Prioritized Attention Bias (SZ-PAB) to explicitly decouple modality contributions via region-wise constraints guided by anatomical priors, and a Channel-Independent Temporal AU Encoder (CIT-AE) to model temporally coherent AU dynamics. By integrating these representations into 3D Gaussian deformation, EmoZone-Talker enables precise and interpretable control over facial expressions. Extensive experiments demonstrate that our method improves expression controllability and realism, with notable gains in upper-face accuracy and temporal coherence, while preserving high rendering quality and accurate lip synchronization. Code will be publicly released to facilitate reproducibility and further research.

24.
arXiv (CS.AI) 2026-06-25

RWGBench: Evaluating Scholarly Positioning in Related Work Generation

arXiv:2606.24894v1 Announce Type: cross Abstract: Large language models have shown strong fluency in scientific writing, yet the evaluation of related work generation (RWG) remains limited. Existing RWG evaluations largely inherit summarization-oriented metrics, using lexical or semantic similarity to reference sections as proxies for quality. However, related work writing is fundamentally a citation-level scholarly positioning task: it requires selecting, organizing, and framing prior work to clarify how a target paper relates to, differs from, and contributes beyond existing research.As a result, models may generate coherent and semantically-relevant text while exhibiting academically critical failures, such as inappropriate citation selection or misplaced references, that conventional metrics do not capture.To this end, we introduce RWGBench, a benchmark that evaluates RWG from the perspective of citation decision-making rather than text similarity. RWGBench is constructed from a large-scale collection of 40,108 computer science papers and a retrieval corpus of 1.09 million documents, with a carefully curated test set comprising 100 papers and their corresponding published related work sections.We propose a multi-dimensional evaluation framework that assesses citation selection, contextual appropriateness, organization, and discourse structure.Experiments reveal systematic limitations in current systems that are obscured by standard evaluations, while Oracle studies further disentangle retrieval-level and generation-level bottlenecks. Human evaluation further shows that our citation-centric metrics align substantially better with expert judgment than surface-level text metrics. RWGBench offers a citation-centric testbed for developing and evaluating related work generation systems that are better aligned with scholarly writing practices.

25.
arXiv (CS.CV) 2026-06-16

GraphWorld: Long-Horizon Planning with World Models for End-to-End Autonomous Driving

End-to-end autonomous driving has made significant progress by unifying perception, prediction, and planning within a single learning framework, achieving strong performance in short-horizon decision making. However, most existing E2E-AD methods remain confined to short-horizon planning and lack the ability to model long-term temporal dependencies, which severely limits their generalization and security in complex and highly interactive driving scenarios. In this work, we propose GraphWorld, an E2E-AD framework that explicitly enhances long-horizon planning through latent world modeling. We introduce an Ego-Centric Interaction Graph, which adaptively models critical neighboring agents based on spatial proximity, and propagates relational context to planning queries via cross-node cross-attention. We present a World-State-Conditioned Planning that learns ego-centric latent world representations by modeling interactions between an ego vehicle and surrounding agents. This latent world state captures key interaction dynamics and safety-relevant semantics, and serves as a conditioning signal to guide long-horizon, safety-aware trajectory planning. Extensive experiments on Bench2Drive, NAVSIMv1/2, and nuScenes demonstrate that GraphWorld significantly reduces collision rates and improves long-horizon planning performance, validating its effectiveness in complex driving environments.