×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Pan ×
Shuffle
01.
medRxiv (Medicine) 2026-06-22

Deep-Tissue Hemodynamic Sensing: Comparing Impedance and Photoplethysmography for Wearable Blood Pressure Estimation

The pursuit of continuous, cuffless blood pressure (BP) monitoring is constrained by the superficial sensing depth of photoplethysmography (PPG). Impedance plethysmography (IPG) offers deeper tissue penetration, but its comparative value over PPG remains unquantified at scale. In this comparative study of 261 participants (130 hypertensive, 131 non-hypertensive), we utilized a custom dual-modality wearable prototype to capture simultaneous IPG and PPG signals. Over 150,000 cardiac cycles were analyzed using an unsupervised archetype discovery pipeline to quantify beat-to-beat morphological heterogeneity. IPG resolved up to three distinct morphological modes per participant, whereas co-located PPG converged into highly conserved, uniform profiles. IPG captured specific signatures of pathological arterial remodeling and physiological habitus; ventral forearm IPG pulse amplitude exhibited a significant main effect for BP status (p = 0.024), a relationship absent in the co-located PPG signal. Furthermore, increasing body mass index (BMI) significantly attenuated the prevalence of steep-upstroke archetypes in IPG (p = 0.035), quantifying a likely damping effect of adipose tissue. Deep-tissue bioimpedance captures rich, heterogeneous hemodynamic signatures including arterial-dominant morphologies that are invisible to optical sensors. Transitioning from optical pulse wave analysis to bioimpedance-based models may offer a promising pathway for accurate wearable cardiovascular monitoring.

02.
arXiv (CS.AI) 2026-06-17

CyberEvolver: Structured Self-Evolution for Cybersecurity Agents On the Fly

arXiv:2605.26195v2 Announce Type: replace-cross Abstract: LLM-based agents are increasingly used for cybersecurity tasks, but most existing systems rely on fixed, human-designed scaffolds that struggle to adapt across diverse targets and failure modes. We introduce \textsc{CyberEvolver}, a self-evolving cybersecurity agent framework that iteratively revises its own scaffold based on experience from failed execution attempts. Self-evolution in cybersecurity is challenging because the space of possible scaffold changes is largely unstructured, execution feedback is sparse and often obscured by the environment, and low-diversity updates can cause errors to compound over repeated iterations. \textsc{CyberEvolver} addresses these challenges with a four-layer evolvable agent architecture that decomposes scaffold optimization into structured components, a trace-to-diagnosis mechanism that converts noisy execution logs into actionable revision signals, and a population-based beam search strategy that preserves diverse agent variants during evolution. We evaluate \textsc{CyberEvolver} on CTF challenges, vulnerability exploitation, and penetration-testing tasks using four open-source LLMs. Across these settings, \textsc{CyberEvolver} improves the seed agent's success rate by $13.6$\,\% on average, and outperforms six human-designed cybersecurity agents as well as two self-improvement methods adapted from other domains. These results suggest that scaffold self-evolution is a promising direction for building adaptive LLM agents for security testing.

03.
arXiv (CS.CV) 2026-06-16

SceneConductor: 3D Scene Generation from a Single Image with Multi-Agent Orchestration

Generating complete 3D scenes from a single image requires inferring globally consistent geometry, object relationships, and environmental context from inherently ambiguous visual evidence. Despite recent progress in joint layout-and-mesh generation, existing methods often rely on holistic or weakly decomposed pipelines that entangle many factors at once and demand extensive scene-level supervision, limiting their generalization to complex real-world environments. We propose a multi-agent orchestration framework that decomposes single-image 3D scene generation into three structured stages: scene initialization, environment construction, and multi-agent refinement. The initialization stage extracts image-derived object masks, builds object-level 3D representations, and predicts an initial spatial layout to form a coarse 3D scene. The environment-construction stage then leverages this initialization together with point-map geometry to build an environmental scaffold of supporting surfaces, room boundaries, materials, and illumination. Finally, in the refinement stage, a planner agent identifies structural and visual inconsistencies, applies simple corrections directly, and dispatches specialist agents for complex localized revisions that are reintegrated into the global scene. To provide reliable structural initialization while reducing reliance on scene-level annotations, we further introduce a geometry-aware layout predictor supervised by sparse geometric priors derived from point maps. Unlike fully supervised layout generators, the predictor can be trained from segmentation-level data and generalizes robustly to diverse real-world scenes. Extensive experiments on benchmark datasets show that our method consistently outperforms prior approaches in geometric accuracy, spatial consistency, and perceptual realism.

04.
medRxiv (Medicine) 2026-06-22

Climatic Drivers of Malaria risk in Children Under Five: A Large-Scale Analysis of individual-level data for 350,000 children in 26 Sub-Saharan African Countries

Background Malaria risk is influenced by climatic conditions, and children under five are particularly vulnerable due to their limited acquired immunity. We investigate the association between climatic factors and malaria risk in 350,000 children aged 5-59 months in sub-Saharan Africa over 18 years. Methods We included children aged 5-59 months with malaria tests from Demographic and Health Surveys (DHS) in 26 sub-Saharan African countries between 2006 and 2023. We linked these data to high-resolution climate exposures: temperature, precipitation, soil moisture, actual evapotranspiration and specific humidity. We fitted a mixed-effect logistic regression model incorporating Distributed Lag Non-linear Models (DLNM) over 1-6 month lag window for each exposure, controlling for seasonality and long-term trends. We examined effect modification by maternal education, household wealth, residential type, water source, sanitation facility, child age and sex, use of insecticide-treated bed nets (ITNs), and the age of the household head. Results Malaria prevalence was 19.5%. Malaria risk was highest at 24 degrees (OR: 1.45, 95% CI: [1.36, 1.54]), followed by a decline at higher temperatures. This elevated risk was mainly driven by short-term exposures (1-2 months). Precipitation increased risk up to 59 ~ 120 mm (1.10, [1.07, 1.12]), after which heavier rainfall reduced risk, particularly at short- to medium-term lags (1-4 months). Soil moisture was associated with increasing risk up to ~80 mm (1.11, [1.08, 1.14]), with a plateau at higher levels. Evapotranspiration showed a strong, near-linear positive association with malaria risk. Higher specific humidity levels (>14 g/kg) presented a lower risk, reaching a 45% reduction at 17 g/kg (0.55, [0.49, 0.61]), with the strongest protective effects at short-term lags (1-2 months). Elevated malaria risk at low and moderate average temperatures was particularly evident among children who did not sleep under an ITN net. Conclusion Malaria risk in children under five is strongly shaped by climatic factors, with complex and delayed associations. The findings provide evidence to guide targeted interventions and early-warning strategies for vulnerable populations.

05.
arXiv (CS.AI) 2026-06-16

The Energy Blind Spot: NVIDIA's Flagship Edge AI Hardware Cannot Support Process-Level Energy Attribution

arXiv:2605.27599v2 Announce Type: replace-cross Abstract: Agentic AI workloads - where a single user goal triggers multi-step orchestration, tool calls, retries, and failure recovery - are being targeted for edge deployment, with NVIDIA, Dell, HP, ASUS, MSI, Acer, and Gigabyte all shipping GB10-based desktop AI systems in 2026. We recently demonstrated that orchestration structure dominates agentic energy cost, with workflows consuming 4.33x more energy per successful goal than linear baselines and OOI reaching 7.63x for multi-step reasoning tasks. Separately, Raj et al. show that CPU-side processing accounts for up to 90.6% of total latency and 44% of total dynamic energy in agentic workloads. We report a systematic energy-observability audit of the ASUS Ascent GX10 (GB10 SoC) and find that the platform exposes no CPU energy counter, no INA power-rail monitor, no IPMI/BMC, and no SCMI powercap protocol through any supported software interface. The only on-device energy telemetry is instantaneous GPU power via NVML. We further discover that the MediaTek firmware already computes per-rail energy internally via an undocumented ACPI interface (SPBM), but NVIDIA states there are "no plans to expose CPU rail information." On-device per-process energy attribution - as performed on x86 via RAPL - is therefore not reproducible on this platform through supported interfaces. We formalize a hardware requirements specification for energy-attributed AI, propose an interim calibration bridge for per-domain energy decomposition - confirmed on the Acer Veriton GN100 where CPU energy accumulators are live - and identify a standards-track path via SCMI powercap. Our findings motivate the low-carbon computing community to demand energy observability as a first-class hardware requirement.

06.
arXiv (CS.LG) 2026-06-18

Diffusion-Proof: Recipe for Formal Theorem Proving Beyond Auto-Regressive Generation

arXiv:2606.19315v1 Announce Type: new Abstract: Enhancing the formal math reasoning capabilities of Large Language Models (LLMs) has become a key focus in both mathematical and computer science communities in recent years. While significant progress has been made in using state-of-the-art Auto-Regressive (AR) LLMs for formal theorem proving, these models suffer from inherent limitations. Their next-token prediction generation methods may yield suboptimal performance due to the challenges of long-range coherence and the compounding of errors over long sequences. Recent advancements in diffusion LLMs (dLLMs), which generate text through iterative denoising of a multi-token block, offer a promising alternative. However, the application of dLLMs to formal mathematics, where maintaining long-range coherence is critical, remains largely understudied. To address the challenges above, we propose **Diffusion-Proof**, to the best of our knowledge, the first framework to train and apply dLLMs for formal theorem proving. Our frameworks contain training and inference methods for two models. The first one is *dLLM-Prover-7B*, which performs whole-proof writing with long-range coherent tactic usage. The second one is *dLLM-Corrector-7B*, which is a novel large block diffusion-based correction model. It leverages the in-filling capabilities of dLLMs to perform local proof correction using bi-directional information. Extensive experiments demonstrate that **Diffusion-Proof** relatively significantly outperforms the AR LLM baseline trained under the same dataset. **Diffusion-Proof** achieves an absolute improvement of **1.61%** on ProofNet-Test and **6.14%** on MiniF2F-Test benchmarks compare to the baseline. Notably, **Diffusion-Proof** successfully resolves one IMO problem that more advanced thinking model DeepSeek-Prover-V2-7B could not solve, showcasing the unique advantage of dLLMs in formal theorem proving.

07.
arXiv (CS.LG) 2026-06-11

Trajectory Geometry of Transformer Representations Across Layers

arXiv:2606.09287v2 Announce Type: replace Abstract: Understanding how transformer representations evolve across layers, not merely what they encode, remains an open problem in mechanistic interpretability. We recast the transformer forward pass as a discrete population trajectory through a high-dimensional representation manifold, drawing on geometric tools from computational neuroscience. Rather than probing for pre-specified features, we characterize trajectory geometry using five metrics computed directly in the ambient space: trajectory length, curvature, a semantic convergence index, layerwise cosine similarity, and representational stability. Across three model families (GPT-2, TinyLlama, Qwen2.5) and five controlled prompt families, we report four findings. First, semantically related prompts converge significantly in middle-to-late layers (peak CI 0.41–0.58, p

08.
bioRxiv (Bioinfo) 2026-06-14

Cellfm-datasets: A Unified Data Infrastructure for Single-Cell and Spatial Transcriptomics Foundation Model Pretraining

Large-scale cell foundation models are increasingly limited not only by model architecture, but also by the data infrastructure required to repeatedly sample sparse transcriptomic profiles from out-of-core cohorts. AnnData/H5AD has become a standard exchange format for single-cell and spatial omics analysis, yet its HDF5-backed layout is not designed for high-frequency random mini-batch loading under multi-worker and distributed pretraining. We present Cellfm-datasets, a data infrastructure artifact that converts H5AD cohorts into a self-describing compressed sparse row (CSR) memmap layout and exposes the resulting corpus through Hugging Face Dataset and IterableDataset interfaces. The artifact stores a shared gene vocabulary, per-sample metadata, optional spatial coordinates, observation metadata, manifests, and checksums, and reconstructs sparse cell or group records at runtime without dense expansion. A unified sampling abstraction supports random-cell groups, manifest-defined biological regions, and coordinate-based spatial blocks, with deterministic sharding across distributed ranks and data-loader workers. Spatial demonstrations on P14 mouse brain transcriptomics sections illustrate region- and block-level sampling over real anatomical structures. In controlled benchmarks on a public heterogeneous ModelScope scRNA-seq subset, Cellfm-datasets reached 60,571 +/- 1,734 samples/s in single-core random loading, scaled to approximately 160,000 samples/s with eight workers, and maintained near-constant process-private memory while reading up to one million cells. By moving sparse single-cell and spatial corpora from model-specific loader code into reusable, validated, and framework-native dataset artifacts, this design may reduce the engineering burden of reproducible cell foundation model pretraining and make repeated training runs, model comparisons, and mixed-modality data reuse easier to standardize.

09.
arXiv (CS.CV) 2026-06-25

Cross-Modality Structural Guidance in 3D Latent Diffusion for Robust FLAIR Super-Resolution

High-resolution (HR) MRI acquisition is often hampered by scan time constraints, resulting in anisotropic or low-resolution scans (e.g., thick-slice FLAIR) that limit diagnostic accuracy. While deep learning-based super-resolution (SR) methods show promise, they often hallucinate anatomical details, which can compromise brain structural integrity. To mitigate this limitation, we introduce MR-DiffuSR, a Multi-Resolution Diffusion-based Super-Resolution framework that incorporates HR T1w structural image priors to guide the restoration of thick-slice FLAIR scans and operates in the 3D latent space. Our architecture introduces cross-modality structural swin-attention, which derives structural attention maps from the HR T1w and applies them to the low-resolution FLAIR latent features. This design disentangles anatomical structure from modality-specific contrast, effectively preventing hallucinations. Furthermore, we employ a mixed-scale degradation strategy, training the model on a continuum of downsampling factors to ensure robustness to varying slice thicknesses, while optimizing with a DINOv3-based perceptual loss to preserve high-frequency semantic details. Evaluated on the ADNI-4 dataset, MR-DiffuSR surpasses both CNN and 2D diffusion approaches, achieving an average PSNR of 32.46dB, SSIM of 0.97, and LPIPS of 0.07 across all downsampling factors. In downstream white matter hyperintensity segmentation, our model demonstrates exceptional robustness. While baseline performance collapses at 10x down-sampling (Dice: 0.51), MR-DiffuSR maintains a Dice score of 0.63, preserving utility even at 7mm equivalent slice thickness.

10.
arXiv (CS.CL) 2026-06-16

ACCORD: Action-Conditioned Contextual Grounding for Language Agents

User instructions are often underspecified because humans rely on implicit assumptions about the surrounding environment. For large language model (LLM) agents operating in information-rich digital and physical environments, these assumptions cannot be inferred from the instruction alone; they must be recovered from the current state of tools, data, interfaces, and observations. Effective execution therefore requires agents to identify missing context, ground it in observed evidence, and carry it forward into subsequent actions. We show that current agents often fail to do so. They act from assumed rather than observed specifics, overlook information they could have gathered, and fail to incorporate evidence that has already been returned. Building on this insight, we propose ACCORD (Action-Conditioned Contextual Grounding), a simple and effective agent framework for adaptive grounding. Before each action, ACCORD actively probes the environment for missing information and integrates relevant context from the agent's trajectory that would otherwise be overlooked. Requiring no additional training or task-success signals, ACCORD improves task-goal completion on AppWorld by up to +20.6 points with GPT-5-mini, from 42.0% to 62.6%, compared to strong baselines. These gains persist with a substantially stronger base model (+10.8 with Claude-4.5-sonnet), an open-weight model (+10.1 with Qwen3.5-27B-FP8), and on the embodied AlfWorld benchmark (+7.4 success rate with GPT-5-mini).

11.
arXiv (CS.LG) 2026-06-24

Scalable Physics-Inspired Transformers for Spin Glasses

arXiv:2606.22984v2 Announce Type: replace-cross Abstract: Efficient sampling of the Boltzmann distribution in frustrated spin glasses is central to statistical mechanics and combinatorial optimization. Despite advances in machine-learning-based approaches, two issues persist: limited understanding of why variational models fail to benefit from increased scale, unlike the monotonic scaling law of large language models; and high computational cost on large systems that negates advantages over classical sampling methods. Here, we develop a physics-inspired transformer with interpretable sparse attention and spin-tailored positional embeddings to address these challenges. By further leveraging FlashAttention for parallel ancestral sampling, it achieves up to two orders of magnitude speedup over vanilla variational autoregressive networks, enabling neural-network simulations of spin-glass systems to unprecedented sizes on a single GPU. It can resolve full probability distributions, free energies, and overlap statistics across temperatures, for Sherrington-Kirkpatrick and 2D or 3D Edwards-Anderson models, where existing machine-learning methods encounter limitations at certain temperatures. This framework thus establishes a scalable paradigm for frustrated spin-glass systems.

12.
Nature (Science) 2026-06-17

Optical fibre gripper for high-performance 3D micromanipulation

Authors:

Optical tweezers offer precise, non-contact control, but operate in a limited force regime and impose strict requirements on the characteristics of the targets as well as the environmental conditions1–4. Millimetre-scale mechanical tweezers can offer higher gripping force but are not suitable for precise manipulations5–11. Integrating microgrippers directly at the optical fibres provides a new approach for precise micromanipulation. However, existing fibre-integrated tweezers still face challenges in achieving high-performance manipulation of micro-objects (for example, single cells) within narrow spaces, mainly due to simplified architectures, constrained designs and millimetre-scale footprints12–14. Here we report a three-dimensional (3D) optical fibre gripper (OFG), which is fabricated by two-step, two-photon polymerization. The OFG consists of rigid photoresist microclaws and soft thermoresponsive hydrogel muscle doped with silver nanoparticles, and its size is only 38 × 38 × 61 μm3. The OFG exhibits a force-to-mass ratio of about 340 μN mg−1, outperforming previously reported fibre-integrated tweezers by one to two orders of magnitude. The OFG can manipulate opaque particles, irregular micromechanical components and diverse single-cell types. We further demonstrated its potential in 3D microassembly of complex microdevices (bearings, shafts and gearboxes) and biomimetic sampling in the narrow environment (<300 μm). These results position the OFG as a compact fibre-tip manipulator for 3D micromanipulation, offering reversible and tunable gripping in an intermediate force regime between optical field trapping and millimetre-scale mechanical tweezers. A miniature three-dimensional optical fibre gripper enables powerful, precise micromanipulation of particles and single cells in confined spaces, bridging the gap between optical and mechanical tweezers.

13.
arXiv (CS.AI) 2026-06-25

PVF:Understanding AI Vulnerability Against SDCs

arXiv:2405.01741v4 Announce Type: replace-cross Abstract: Reliability of AI systems is a fundamental concern for the successful deployment and widespread adoption of AI technologies. Unfortunately, the escalating complexity and heterogeneity of AI hardware systems make them increasingly susceptible to hardware faults, e.g., silent data corruptions (SDC), that can potentially corrupt model parameters. When this occurs during AI inference/servicing, it can potentially lead to incorrect or degraded model output for users, ultimately affecting the quality and reliability of AI services. In light of the escalating threat, it is crucial to address key questions: How vulnerable are AI models to parameter corruptions, and how do different components (such as modules, layers) of the models exhibit varying vulnerabilities to parameter corruptions? To systematically address this question, we propose a novel quantitative metric, Parameter Vulnerability Factor (PVF), inspired by architectural vulnerability factor (AVF) in computer architecture community, aiming to standardize the quantification of AI model vulnerability against parameter corruptions. We define a model parameter's PVF as the probability that a corruption in that particular model parameter will result in an incorrect output. In this paper, we present several use cases on applying PVF to three types of tasks/models during inference – recommendation (DLRM), vision classification (CNN), and text classification (BERT), while presenting an in-depth vulnerability analysis on DLRM. PVF has been a critical metric used for making key error management design decisions in productionizing Meta's in-house AI chip - MTIA.

14.
arXiv (CS.CV) 2026-06-16

Trusting Right Predictions for Wrong Reasons: A LIME Based Analysis of Deep Learning Interpretability in Lung Cancer Diagnosis

Lung cancer is the leading cause of cancer-related mortality, with approximately 2.5 million new cases and 1.8 million deaths annually, making reliable diagnosis a clinical priority. Although deep learning models have achieved strong performance in lung cancer classification, evaluation has largely focused on predictive accuracy, leaving their decision-making processes insufficiently examined. This study compares three architecturally distinct models: a Convolutional Neural Network (CNN), a pretrained ResNet50, and a Vision Transformer (ViT), trained on the IQ-OTH/NCCD lung cancer CT dataset. Local Interpretable Model-Agnostic Explanations (LIME) were applied to investigate model reasoning. In addition to standard performance metrics, a dual-correlation framework was introduced to measure both prediction agreement and explanation agreement across model pairs. All three models achieved strong classification performance, with ResNet50 attaining 98.61% accuracy, CNN 97.91%, and ViT 93.75%, while all achieved ROC-AUC scores of 0.99. Prediction correlations exceeded 0.99 across all model pairs, indicating highly consistent outputs. However, LIME explanation correlations remained below 0.26, revealing substantial differences in the image regions used to reach those predictions. Analysis of misclassified samples further identified a consistent spatial pattern: incorrect predictions were associated with attention outside the lung parenchyma, whereas correct predictions focused primarily within lung regions. These findings demonstrate that prediction agreement is a poor proxy for reasoning consistency, and that interpretability evaluation must be treated as an independent validation criterion alongside predictive performance in clinical AI systems.

15.
arXiv (CS.AI) 2026-06-16

Mind-Studio: Executable World Models with Lookahead Evaluation for Partially Observable Games

arXiv:2606.16070v1 Announce Type: new Abstract: World-model synthesis aims to turn interaction experience into an internal model of environment dynamics. Existing symbolic approaches often fit observed transitions or mixtures of local rules, but they do not produce a complete executable program that can run independently of the real environment. We present Mind-Studio, a framework that synthesizes executable pygame-style world models from state-action-next-state trajectories using large language models. Mind-Studio combines entropy-selected traces with a lightweight game skill file containing object, action, and static scene information extracted from screenshots. We evaluate synthesis quality with a K-step lookahead fidelity protocol that compares generated world-model rollouts against Real-ALE rollouts from the same state. On Montezuma's Revenge, Mind-Studio improves chosen-action next-state prediction from 0.3% for PoE-World to 48.7% while verifying 5 of 8 subgoals; across Alien, Assault, and Skiing, it achieves stronger branch-level fidelity than prior learned lookahead sources.

16.
arXiv (CS.CL) 2026-06-12

HyperTool: Beyond Step-Wise Tool Calls for Tool-Augmented Agents

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

17.
arXiv (CS.LG) 2026-06-15

How Task Structure Limits Multi-Agent Success: An Information-Theoretic Analysis

arXiv:2606.13733v1 Announce Type: cross Abstract: Multi-agent systems (MAS) were expected to overcome the limitation of single-agent systems (SAS) through collaboration. However, under typicality conditions on the task's constraint graph and bounded inter-agent communication, we prove that the success probability of a MAS is closely tied to the connectivity of task constraints, where each agent has limited information-processing capacity. Specifically, the success probability decays exponentially with an information bottleneck that emerges from partitioning the task's constraint graph among agents. We define this quantity as the minimum cut cost $C_{\min}$ of the potential constraint graph of each task. This information-theoretic bound applies to both open systems with external feedback and closed systems without. We validate our theory on both synthetic experiments and real-world empirical data from SWE-bench submissions. From our framework, effective MAS design should incorporate task-inherent constraints alongside engineering optimization, and when $\Cmin$ is high, practitioners should restructure tasks rather than simply scaling agents or communication.

18.
arXiv (CS.AI) 2026-06-18

RankGraph-2: Lifecycle Co-Design for Billion-Node Graph Learning in Recommendation

arXiv:2606.18379v1 Announce Type: cross Abstract: Graph-based retrieval at billion-node scale requires jointly solving three tightly coupled problems – graph construction, representation learning, and real-time serving – yet existing work addresses each in isolation. We present RankGraph-2, a framework deployed at Meta that co-designs all three lifecycle stages for similarity-based retrieval (U2U2I and U2I2I), where each stage's requirements shape the others. Serving requires a co-learned cluster index to avoid expensive online KNN – this pushes index co-training into the training objective. Training benefits from the observation that similarity-based retrieval tolerates pre-computed neighborhoods, eliminating online graph infrastructure – this requires construction to produce self-contained data. Construction must also support hour-level refresh for item coverage. Acting on these cascading requirements, RankGraph-2 reduces hundreds of trillions of edges to hundreds of billions via subsampling with popularity bias correction, pre-computes multi-hop neighborhoods via personalized PageRank, and co-learns a residual-quantization cluster index that reduces serving computational cost by 83%. This lifecycle co-design enables a simple architecture to achieve 3.8 x higher recall than a GAT + Deep Graph Infomax model on a bipartite graph and 2.1 x higher than PyTorch-BigGraph on item retrieval. RankGraph-2 delivers up to +0.96% CTR and +2.75% CVR, and has powered 20+ retrieval launches across major surfaces.

19.
arXiv (CS.AI) 2026-06-12

Benchmarking AI Agents for Addressing Scientific Challenges Across Scales

arXiv:2606.12736v1 Announce Type: new Abstract: AI agents are increasingly being developed to accelerate scientific discovery, yet their practical capabilities in real research settings remain poorly understood. Existing benchmarks for AI agents rarely capture the complexity, heterogeneity, and extended reasoning required by scientific work, whereas benchmarks for scientific tasks often reduce research to static, direct problems and provide limited support for interactive evaluation. Here, we introduce SciAgentArena, a systematic benchmark for evaluating AI agents in real-world scientific research scenarios drawn from emerging needs across multiple domains. SciAgentArena comprises approximately 200 tasks with stepwise verification and an interactive, agent-agnostic environment for assessing diverse AI agents. Using this benchmark, we find that current agents can contribute effectively to well-specified data-analysis workflows, particularly when the task structure and evaluation criteria are clear. However, their performance remains uneven across scientific contexts: agents struggle to generate genuinely novel insights, sustain self-directed exploration, and formulate robust solutions for open-ended research questions. We further characterize common failure modes across agents and identify opportunities for improving their reliability, autonomy, and scientific reasoning. Together, SciAgentArena provides a practical framework for measuring progress in AI agents for science and for guiding the design of future agents capable of addressing complex scientific challenges. Full codes, tasks, and datasets can be accessed via this link: https://sciagentarena.github.io/.

20.
arXiv (CS.AI) 2026-06-15

CoRe-MoE: Contrastive Reweighted Mixture of Experts for Multi-Terrain Humanoid Locomotion with Gait Adaptation

arXiv:2606.04718v3 Announce Type: replace-cross Abstract: Humans primarily rely on walking and running to traverse complex terrains. Similarly, humanoid robots should be able to smoothly transition between walking and running while maintaining natural and stable locomotion. However, unifying gait transition and multi-terrain adaptation within a single policy remains challenging due to gradient interference between tasks and the distribution shift caused by terrain variations. Although Mixture-of-Experts (MoE) architectures can mitigate multi-skill interference, direct joint training often fails to achieve clear expert specialization. To address these challenges, we propose CoRe-MoE, a two-stage reinforcement learning framework that decouples gait generation from terrain adaptation. In the first stage, a stable locomotion policy is learned to produce natural walking and running behaviors with smooth transitions. In the second stage, a terrain-aware MoE branch is introduced, and the gating network is trained with a contrastive objective to learn structured terrain representations and promote expert specialization. The final action is obtained through weighted fusion of the base gait policy and the terrain-aware branch, enabling the policy to preserve stable locomotion while adapting to complex terrains. Extensive simulation results demonstrate that the proposed method outperforms baseline approaches in terms of success rate, locomotion stability, and multi-terrain adaptability. Furthermore, zero-shot deployment on a Unitree G1 humanoid robot validates the effectiveness of our framework, achieving robust walking and running across stairs, slopes, steps, obstacles, and unstructured outdoor terrains while maintaining accurate foothold control and dynamic stability.

21.
arXiv (CS.AI) 2026-06-24

FlowR2A: Learning Reward-to-Action Distribution for Multimodal Driving Planning

arXiv:2606.24231v1 Announce Type: new Abstract: Multimodal driving planning faces a long-standing tension between two paradigms: scoring-based methods benefit from dense reward supervision but are confined to a fixed action vocabulary, while anchor-based methods generate proposals dynamically yet suffer from sparse supervision constrained to a single ground-truth trajectory. In this work, we propose FlowR2A, which resolves this tension by reframing simulation-based rewards from discriminative targets into generative conditions. By learning the reward-conditioned action distribution from dense trajectory-reward pairs with a flow-matching decoder, FlowR2A unifies the dense supervision of scoring-based methods with the proposal generation of anchor-based methods in a single generative model, forcing the model to internalize the correlation between an action and its outcomes in safety, progress, comfort, and rule compliance. To balance hard safety constraints against soft progress objectives, we introduce fine-grained per-timestep reward conditioning and reward noise augmentation. The generative formulation naturally supports controllable test-time sampling via reward guidance and anchored sampling, producing high-quality proposals. FlowR2A achieves state-of-the-art results on the NAVSIM v1 and v2 benchmarks, with multimodal proposals of substantially higher quality than prior methods.

22.
arXiv (CS.LG) 2026-06-18

Towards Anomaly Detection on Relational Data

arXiv:2606.18621v1 Announce Type: new Abstract: Relational databases are widely used for managing structured data in real-world systems. Detecting anomalies from such relational data is crucial for identifying fraud, risks, and abnormal behaviors, yet remains under-explored. The key challenges lie in the intrinsic complexity of relational data: multi-table attributes are high-dimensional and heterogeneous, making sparse abnormal clues easy to overwhelm by normal or irrelevant information; and anomalies may further manifest as abnormal connection patterns across different foreign-key relations, which existing tabular and graph anomaly detection methods are ill-suited to capture. To address them, we propose RelAD, a reconstruction-based framework that captures anomalies from both attribute and relational edge reconstruction. RelAD contains two core modules: conditional sparse-gated attribute reconstruction, which suppresses redundant multi-table attributes and emphasizes abnormal semantic blocks, and dual-view multi-relational edge reconstruction, which detects relation-specific abnormal connections from both intrinsic and behavioral entity profiles. The resulting attribute and relational signals are integrated through a lightweight fusion module to produce the final anomaly score. We further construct 6 benchmark datasets with systematic anomalies, on which extensive experiments show that RelAD consistently outperforms other baselines while achieving competitive efficiency.

23.
arXiv (CS.CL) 2026-06-18

Efficient Hallucination Detection for LLMs Using Uncertainty-Aware Attention Heads

While large language models (LLMs) have become highly capable, they remain prone to factual inaccuracies, commonly referred to as "hallucinations." Uncertainty quantification (UQ) offers a promising way to mitigate this issue, but most existing methods are computationally intensive and/or require supervision. In this work, we propose Recurrent Attention-based Uncertainty Quantification (RAUQ), an unsupervised and efficient framework for identifying hallucinations. The method leverages an observation about transformer attention behavior: when incorrect information is generated, certain "uncertainty-aware" attention heads tend to reduce their focus on preceding tokens. RAUQ automatically detects these attention heads and combines their activation patterns with token-level confidence measures in a recurrent scheme, producing a sequence-level uncertainty estimate in just a single forward pass. Through experiments on twelve datasets spanning question answering, summarization, and translation across nine different LLMs, we show that RAUQ consistently outperforms state-of-the-art UQ baselines. Importantly, it incurs minimal overhead, requiring less than 1\% additional computation. Since it requires neither labeled data nor extensive parameter tuning, RAUQ serves as a lightweight, plug-and-play solution for real-time hallucination detection in white-box LLMs.

24.
arXiv (CS.AI) 2026-06-16

UrbanWell: Benchmarking Multimodal Large Language Models for Spatio-Temporal Urban Wellbeing Analytics

arXiv:2606.15890v1 Announce Type: new Abstract: Understanding urban wellbeing from multimodal data requires integrating heterogeneous spatial and temporal signals, posing significant challenges for current multimodal large language models (MLLMs). We introduce UrbanWell, a large-scale benchmark designed to systematically evaluate the spatio-temporal reasoning capabilities of MLLMs for urban wellbeing analytics through joint modeling of satellite and street view imagery. UrbanWell spans 38 cities across multiple years and includes diverse indicators covering (1) environmental conditions (CO$_2$, NO$_2$, PM${2.5}$, and Normalized Difference Vegetation Index), (2) spatial accessibility (minimum distance to supermarkets and restaurants), (3) urban form (road length, road density, and land use), (4) urban vitality (population, economic activity diversity, and land use diversity), and (5) subjective perception attributes (e.g., safety, beauty, liveliness, wealth, and quietness). All indicators are aligned at grid level to enable standardized evaluation. Beyond static prediction, UrbanWell defines temporal reasoning tasks, including future value forecasting from historical observations and temporal trend classification. We benchmark 15 state-of-the-art representative MLLMs in a zero-shot setting, providing a comprehensive comparative evaluation across spatial and temporal dimensions. Experimental results indicate that while MLLMs capture salient spatial and perceptual cues, their performance varies substantially across heterogeneous urban indicators spanning environment and subjective perception. UrbanWell serves as a unified benchmark for evaluating multimodal spatial and temporal reasoning in urban wellbeing analytics, offering a standardized testbed for systematic assessment and future research on multimodal urban intelligence. Our codes and datasets are accessible via https://github.com/axin1301/UrbanWell-Benchmark.

25.
arXiv (CS.CL) 2026-06-16

Exploring Extrinsic and Intrinsic Properties for Effective Reasoning with Code Interpreter

Reasoning with a Code Interpreter (CI) has emerged as an effective paradigm for enhancing the reasoning capabilities of large language models (LLMs) through executable computation and iterative verification. Despite its growing adoption, the behavioral properties underlying effective code reasoning remain largely underexplored. In this work, we investigate code reasoning from two distinct perspectives inspired by prior studies of natural language reasoning: extrinsic properties, represented by crucial tokens, and intrinsic properties, represented by code-specific cognitive behaviors. Across multiple LLMs, we find that stronger CI reasoning models consistently exhibit a higher prevalence of crucial tokens and cognitive behaviors, particularly verification, backtracking, and backward chaining. Building on these observations, we examine how these properties can be leveraged during both inference and training. At inference time, appending code-specific crucial tokens improves performance on several reasoning capabilities, including mathematical, ordering, and optimization, while yielding limited benefits elsewhere. At training time, augmenting a state-of-the-art framework with code-specific cognitive behaviors improves supervised fine-tuning and reinforcement learning performance in two of three evaluated models. Further analysis shows that these behaviors reduce overthinking in incorrect responses and improve token efficiency, while also revealing factors that limit gains in a certain model. Our findings provide the first systematic characterization of effective reasoning with CI and demonstrate both the potential and limitations of leveraging key properties to improve CI-based reasoning.