×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Nel ×
Shuffle
01.
arXiv (CS.CV) 2026-06-15

Prompt2Effect: Training-Free Image-to-Video Model Specialization via LoRA Generation

Personalizing Image-to-Video (I2V) diffusion models with specific visual effects is increasingly demanded for high-end video generation. Current practice requires training a separate Low-Rank Adaptation (LoRA) module for each effect, incurring substantial data curation and iterative optimization costs that hinder interactive control. We present Prompt2Effect, a weight-driven hypernetwork that amortizes per-effect training by directly synthesizing effect-specific LoRA weights in a single forward pass. Unlike prior hypernetworks that regress adapter weights purely from semantics, Prompt2Effect is explicitly conditioned on the frozen base model weights, grounding weight prediction in the structural geometry of each layer. Furthermore, instead of predicting raw LoRA matrices, we introduce an SVD-canonicalized parameterization that resolves factorization ambiguity and stabilizes large-scale weight synthesis. Together, these design principles enable accurate and scalable LoRA prediction for high-dimensional I2V diffusion models. Extensive experiments demonstrate that Prompt2Effect achieves on-par or superior video quality and effect alignment compared to conventional LoRA fine-tuning, while reducing the computational cost from 56 GPU training hours to 3.3 seconds of hypernetwork inference. When used as initialization for subsequent fine-tuning, our predicted weights further improve final performance and accelerate optimization by approximately 10x.

02.
arXiv (math.PR) 2026-06-17

Order statistics for edge eigenvectors of Wigner matrices

arXiv:2606.17425v1 Announce Type: new Abstract: In this paper, we establish a general comparison theorem for the order statistics of the edge eigenvectors for generalized Wigner matrices. Consequently, we derive the Gumbel law for the maximal edge eigenvector component and prove the universality of the Gaussian fluctuations of the order statistics in an intermediate regime close to the maximum. In addition, our comparison result also implies a quantitative first order estimate for moderately small order statistics.

03.
arXiv (CS.AI) 2026-06-16

The embrace of open science: An analysis of a decade of AI research and 56 800 conference papers

arXiv:2606.16974v1 Announce Type: new Abstract: The reproducibility crisis has directed the AI research community toward improving documentation practices. Several studies have identified methodological issues, and in response, the most impactful venues in the field have introduced reproducibility checklists. We seek to understand whether documentation practices have changed over time by assessing all published papers at five leading AI conferences over the past decade. Seven reproducibility variables were identified, quality-assured and used to analyse 56 800 publications. Our analysis reveals that in the period 2014 to 2024, documentation practices have improved; papers sharing both code and data increased nearly sixfold, from 11% to 64% Building on empirical reproducibility rates from a prior study, we estimate - inferred from documentation practices, not direct testing - that reproducibility increased from 28% in 2014 to 64% in 2024. Improvements in documentation practices predate the introduction of reproducibility checklists, suggesting these changes reflect a broader movement toward open science rather than a direct response to formal requirements.

04.
arXiv (CS.AI) 2026-06-15

Mask, Sample, Revise: A Revisable CTMC Inference Stack for Guided Discrete Flow Matching Text-to-Speech

arXiv:2606.13989v1 Announce Type: cross Abstract: Recent alignment-free non-autoregressive (NAR) text-to-speech (TTS) models formulate synthesis as a conditional infilling task, bypassing explicit duration predictors and external aligners. When speech is represented with neural codec tokens, the infilling problem becomes discrete, making Discrete Flow Matching (DFM), a Continuous-Time Markov Chain (CTMC) framework for discrete generation, a natural fit. However, inference-time control for stable low-step conditional infilling remains underexplored. We propose Mask, Sample, Revise, an inference-time CTMC stack for alignment-free DFM-TTS. The stack combines predictor-free guidance to strengthen text conditioning, prompt-matched conditional coupling to align the probability path with the acoustic prompt, and SC-ReMask, a schedule-constrained remasking mechanism that introduces token-to-mask transitions so early de-masking decisions can be revised. These components require no post-hoc fine-tuning and operate in a single tau-leaping sampler. Controlled ablations show that this stack improves intelligibility and robustness in the low-NFE prompted setting, outperforming unguided and guidance-only samplers with substantially more steps.

05.
arXiv (CS.AI) 2026-06-18

EMORSION: Examining the Impact of Audio Parameters on Emotional Responses and Immersion in Film

arXiv:2606.18266v1 Announce Type: cross Abstract: EMORSION is an exploratory proof-of-concept study examining how film audio design shapes audience emotion and immersion in acinema setting. Four film scenes were selected across the horror (2) and drama (2) genres, balanced between mainstream and independent productions. For each scene, multiple alternative audio mixes were created by systematically manipulating three core aspects of audio design, frequency (pitch), dynamics (loudness), and directionality (spatial placement). Three audience groups viewed the scenes, with each group exposed to one manipulated mix alongside a control mix for each scene. Audience responses were assessed through a triangulated multimodal framework combining self-reported emotion and immersion via a questionnaire, physiological measures including heart rate monitoring, and video-based motion tracking. The protocol successfully captured measurable, interpretable differences across audio conditions, indicating that even subtle changes in audio design can shape emotional perception and immersion. Unconventional mixes tended to produce greater variability in audience interpretation, while conventional immersive mixes were associated with stronger cross-audience agreement. These findings establish the feasibility of the EMORSION protocol and motivate larger-scale studies to characterise the role of specific audio parameters in shaping audience experience.

06.
medRxiv (Medicine) 2026-06-16

Optimal Clinical Trials Platform for Progressive Multiple Sclerosis (OCTOPUS): protocol for an international, multi-arm, multi-stage, platform, randomized controlled, double-blind, phase 3 clinical trial.

Introduction Current treatments for multiple sclerosis (MS) do not address the pathological processes of neurodegeneration and chronic demyelination. This, coupled with the significant challenges of translating promising phase 2 results to phase 3 trial success, highlights the need for more efficient trial designs, such as platform multi-arm multi-stage (MAMS) trial approaches. MAMS trials have demonstrated success in areas such as oncology and infectious diseases. They are typified by a statistically robust core trial design that allows the addition of further treatment arms and utilisation of interim outcome analyses at pre-defined timepoints, to determine whether to terminate a treatment arm early or proceed to the final outcome analysis. To address the challenges in progressive multiple sclerosis (PMS) treatment discovery, the Optimal Clinical Trials Platform for PMS (OCTOPUS) trial was developed. It currently utilises MRI whole-brain atrophy as its interim outcome measure and the clinically relevant composite Expanded Disability Status Scale Plus (EDSS-Plus) as its final outcome measure. A rigorous and systematic drug selection process that assessed preclinical in vitro and animal model evidence, along with additional human data, led to the prioritisation of R/S-alpha lipoic acid (R/S-ALA) and metformin for testing against placebo, targeting pathobiological mechanisms relevant to PMS. All participants will be eligible to receive the current standard of care, including disease-modifying treatments (DMTs). Method and analysis OCTOPUS will be a multi-centre, randomised, placebo-controlled, double-blind, phase 3, MAMS trial of participants aged 25 to 70 years (inclusive) with PMS and an EDSS score of 4.0 to 8.0 (inclusive). Steady progression must be the major cause of increasing disability rather than relapse in the preceding 2 years. In the trial s first candidate drug cycle, participants will be allocated to R/S-ALA, metformin, or placebo in a 1:1:1 ratio. Cycle 1 active treatments will start as R/S-ALA 600 mg once daily, increased after 4 weeks to 600 mg twice daily, or metformin 1 g once daily, increased after 4 weeks to 1 g twice daily. The trial will be multinational, with participation from 28 hospitals across the UK and 10 hospitals in Australia. Clinician-reported measures will include: the EDSS-Plus and the individual components: EDSS, Timed 25 Foot Walk (T25FW); 9 Hole Peg Test (9HPT); Symbol Digit Modalities Test (SDMT); Sloan Low Contrast Visual Acuity (SLCVA); and Relapse assessment. Patient-reported outcomes include MS specific walking, fatigue, pain, and impact scales. We will include a health economic analysis. Analysis stage 1 will require randomisation of 125 participants per arm and utilise MRI percentage brain volume change (PBVC) with the Structural Image Evaluation using Normalisation of Atrophy (SIENA) technique from baseline to 78 weeks. A positive outcome in analysis stage 1 will detect a 0.15% per year whole brain atrophy difference with a one-sided alpha of 0.35 and power of 95%, ensuring a low probability of erroneously rejecting a treatment arm at this stage. Any arms that show a positive effect will proceed to final analysis stage 2. Analysis stage 2 will require 600 participants per arm. Participants included in stage 1 will also be included in the stage 2. Analysis stage 2 will evaluate time to 6-month confirmed disability progression in the EDSS-Plus, in order to detect a 25% hazard ratio reduction with 90% power and an alpha of 0.05. Assuming one treatment arm proceeds to analysis stage 2, the trial will recruit approximately 1,200 participants and last about 6 years. This is approximately two-thirds the size and half the duration of separately conducted two-arm phase 2 and 3 trials. Ethics and dissemination The protocol was approved by the London Hampstead REC (22/LO/0622). This manuscript is based on protocol version 8.0, 28th August 2025. The findings of this trial will be disseminated through peer-reviewed publications and conference presentations. There will be a close communication strategy developed with the UK MS Society (MSS) and full patient and public involvement and engagement (PPIE). Trial registration ISRCTN: 14048364 EudraCT number: 2021-003034-37 CTA 20363/0445 IRAS number: 1003943 Secondary identifying numbers: ND001, CPMS 54274 Strengths and limitations - The OCTOPUS trial will be the first platform multi-arm multi-stage phase 3 trial in PMS, offering the potential to significantly expedite clinical trial processes with advantages in cost- and time-efficiency, focusing specifically on the poorly treated pathobiological processes of chronic neurodegeneration and demyelination - It will begin by assessing two promising drug candidates, immediate-release metformin and R/S-ALA, and will expand over the duration of the trial to include more drug arms under the same trial master protocol - The flexible and statistically robust trial design means that several components of the design (such as the early analysis stage 1 interim outcome) can be updated in line with evolving scientific knowledge - It will ultimately be the largest ever investigator-initiated phase 3 trial in PMS - It will include a range of national and international trial sites, including neuroscience centres and district general hospitals - It will have a high inclusion limit for age (up to 70 years) and disability (up to EDSS 8.0) - Several components (the telephone EDSS and virtual patient-reported outcome measures) will be amenable to remote collection increasing inclusivity and thus addressing public and participant suggestions, while minimising the risk of missing data - The main challenges in this trial design are the statistical and methodological complexity involved in design and implementation, and interpretation of interim trial results. Conclusion The trial launched cycle 1 in January 2023. Analysis stage 1 recruitment of 375 participants was achieved in November 2024, enabling planned interim analysis stage 1 to be conducted by late 2026 (Figure 1). On the 1st of June 2026, in the UK, 24 sites are active with a further 4 in set-up as part of stage 2, and in the Australian extension, Platform Adaptive Trial for Remyelination and Neuroprotection in Multiple Sclerosis (PLATYPUS), 1 site is active, with 9 additional sites in set-up.

07.
arXiv (math.PR) 2026-06-16

Cluster sizes in subcritical soft Boolean models

arXiv:2404.13730v2 Announce Type: replace Abstract: We consider the soft Boolean model, a model that interpolates between the Boolean model and long-range percolation, where vertices are given via a stationary Poisson point process. Each vertex carries an independent Pareto-distributed radius and each pair of vertices is assigned another independent Pareto weight with a potentially different tail exponent. Two vertices are now connected if they are within distance of the larger radius multiplied by the edge weight. We determine the tail behaviour of the Euclidean diameter and the number of points of a typical maximally connected component in a subcritical percolation phase. For this, we present a sharp criterion in terms of the tail exponents of the edge-weight and radius distributions that distinguish a regime where the tail behaviour is controlled only by the edge exponent from a regime in which both exponents are relevant. Our proofs rely on fine path-counting arguments identifying the precise order of decay of the probability that far-away vertices are connected.

08.
arXiv (CS.CV) 2026-06-17

NTIRE 2024 Challenge on Image Super-Resolution (x4): Methods and Results

This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge is to obtain designs/solutions with the most advanced SR performance, with no constraints on computational resources (e.g., model size and FLOPs) or training data. The track of this challenge assesses performance with the PSNR metric on the DIV2K testing dataset. The competition attracted 199 registrants, with 20 teams submitting valid entries. This collective endeavour not only pushes the boundaries of performance in single-image SR but also offers a comprehensive overview of current trends in this field.

09.
arXiv (quant-ph) 2026-06-17

Active Quantum Reservoir Engineering: Using a Qubit to Manipulate its Environment

arXiv:2505.16898v4 Announce Type: replace Abstract: Quantum reservoir engineering leverages dissipative processes to achieve desired behavior, with applications ranging from entanglement generation to quantum error correction. Therein, a structured environment acts as an entropy sink for the system and no time-dependent control over the system is required. We develop a theoretical framework for active reservoir engineering, where time-dependent control over a quantum system is used to manipulate its environment. In this case, the system may act as an entropy sink for the environment. Our framwork captures the dynamical interplay between system and environment, and provides an intuitive picture of how finite-size effects and system-environment correlations allow for manipulating the environment by repeated initialization of the quantum system. We illustrate our results with two examples: a superconducting qubit coupled to an environment of two-level systems and a semiconducting quantum dot coupled to nuclear spins. In both scenarios, we find qualitative agreement with previous experimental results, illustrating how active control can unlock new functionalities in open quantum systems.

10.
arXiv (CS.AI) 2026-06-19

Review of Machine Learning Models for Solar Energetic Particle Prediction

arXiv:2606.19539v1 Announce Type: cross Abstract: Solar energetic particle (SEP) events have attracted increasing attention due to their significant radiation hazards for aviation, spacecraft electronics, and human missions beyond Earth's magnetosphere. From a scientific perspective, SEP events are intriguing because they arise from a set of physical processes extending from the solar surface and corona through the heliosphere, offering insight into particle acceleration and transport mechanisms that are widely applicable across astrophysics. Therefore, advancing our ability to understand and predict SEP events is essential both for deepening our knowledge of such mechanisms and for safeguarding space technologies and exploration. Traditionally, researchers have modeled SEPs using physics-based simulations and empirical methods. More recently, machine learning (ML) has emerged as a new tool for understanding and predicting SEP events. The purpose of this manuscript is to review the currently available ML models for SEP prediction, identify the datasets used for training, compare their architectures, inputs, and outputs, and, based on these insights, outline good practices and recommendations for future research.

11.
arXiv (CS.CL) 2026-06-16

Generative causal testing to bridge data-driven models and scientific theories in language neuroscience

Representations from large language models are highly effective at predicting BOLD fMRI responses to language stimuli. However, these representations are largely opaque: it is unclear what features of the language stimulus drive the response in each brain area. We present generative causal testing (GCT), a framework for generating concise explanations of language selectivity in the brain from predictive models and then testing those explanations in follow-up experiments using LLM-generated stimuli.This approach is successful at explaining selectivity both in individual voxels and cortical regions of interest (ROIs), including newly identified microROIs in prefrontal cortex. We show that explanatory accuracy is closely related to the predictive power and stability of the underlying predictive models. Finally, we show that GCT can dissect fine-grained differences between brain areas with similar functional selectivity. These results demonstrate that LLMs can be used to bridge the widening gap between data-driven models and formal scientific theories.

12.
arXiv (CS.CL) 2026-06-12

MiniPIC: Flexible Position-Independent Caching in <100LOC

Retrieval-augmented and agentic workloads repeatedly prefill recurring predictable structured inputs (which we call "spans") such as documents and code files. Yet, prefix caching in engines such as vLLM cannot reuse their KV entries unless they share identical prefixes with another request, while Position-Independent Caching (PIC) implementations within production-grade inference servers typically either require substantial server code changes or keep KV state outside the server, incurring host-to-device transfer overhead. We present Minimalistic PIC (MiniPIC): a minimal, flexible and fast vLLM design built from two ingredients: positional-encoding-free KV cache and user-controlled cache-reuse primitives. MiniPIC stores unrotated K vectors in the KV cache, applies RoPE to K tiles inside attention using per-request logical positions, and exposes three user-facing and token-level primitives: block-aligned padding, span separator (SSep), and prompt depend (PDep), that modify hashing behavior and effective block-level causal attention structure. With fewer than 100 lines of core-engine changes plus a custom attention backend, these primitives are sufficient to realize multiple PIC methods, including Block-Attention, EPIC, and Prompt Cache, within the same running vLLM instance, while natively integrating with KV cache CPU offload implementations. On 2WikiMultihopQA, MiniPIC with interleaved scheduling improves prefill throughput by 49% over baseline vLLM, reduces cached-span time-to-first-token by up to two orders of magnitude, preserves the linear prefill scaling of uncached spans, and incurs only 5.7% worst-case overhead.

13.
arXiv (CS.AI) 2026-06-12

Deployment-Centered Evaluation: Predicting Query-Level Rejection Risk in a Clinical LLM System

arXiv:2606.12702v1 Announce Type: new Abstract: Large language models (LLMs) are increasingly integrated into clinical systems, making it essential to evaluate the real-world utility of these systems. However, static benchmarks tend to measure correctness rather than user acceptance, aggregate performance across queries, and require densely annotated datasets – leading to major blind spots for evaluating clinical systems. In this work, we perform a deployment-centered evaluation of an LLM system embedded within electronic health records at an academic medical center, where user feedback is sparse but closely reflects the deployment conditions. Specifically, we train a pre-response classifier that estimates the risk that a future interaction will result in the user rejecting the LLM response, based on query content and deployment-specific context available before generation. We conduct a prospective analysis of our model over 4.5 months of user feedback, finding that our prediction model achieves an AUROC of 0.719. Further, we estimate the benefit of such predictions in two downstream use cases (guardrail triggering and abstention). Our key conceptual insight is that making use of deployment-specific context (i.e., the provider type, department name, language model used for response), as opposed to only query content, improves the ability to predict whether the user will reject the system output. Altogether, our empirical case study demonstrates the feasibility of predicting user rejection using deployment-specific context, opening the door to targeted guardrails.

14.
arXiv (CS.LG) 2026-06-19

The Representational Limit of Scalar Interactions: An Interventional Decomposition

arXiv:2606.19410v1 Announce Type: cross Abstract: Signed pairwise interaction scores fundamentally conflate uniqueness (U), redundancy (R), and synergy (S). We prove this on a minimal 3-way XOR structural causal model: faithful indices such as Shapley-Taylor return zero per pair, whereas projective indices such as Shapley Interaction spread the third-order effect into pair scalars that conflate the three mechanisms. We introduce Stochastic Hi-Fi, a post-hoc, retraining-free predictability decomposition that estimates per-feature U/R/S profiles by interventional masked inference. The estimator provides exact interventional semantics, finite-sample Monte Carlo bounds, strict variance reduction from coupled diamond sampling, and uniform finite-vocabulary convergence. Across tabular SCMs, Stochastic Hi-Fi recovers structure missed by scalar baselines (up to 411x larger interaction-magnitude recovery ratios). It also separates redundant and synergistic heads in the GPT-2 IOI circuit. On NIH ChestX-ray14, Stochastic Hi-Fi matches GradCAM on Pointing Game and improves substantially on Deletion AUC.

15.
arXiv (CS.CV) 2026-06-19

InfantFace: Detecting infant faces in neonatal clinical environments

Reliable localisation of the neonatal face is the first step for several video-camera based non-contact assessments such as pain and distress related facial expression analysis, pain scoring, cardiorespiratory signal extraction and cessation of breathing alerts. However, major challenges persist in neonatal clinical environments. Cluttered backgrounds, illumination changes and poor lighting conditions can reduce the accuracy of face detection models. Clinical interventions, monitoring equipment and, in some cases, medical devices can obstruct the face, making visual assessment difficult. We propose a one-stage YOLOv11m-based model tailored for face detection of infants in neonatal clinical environments. We combined multiple publicly available datasets (VGGFace2, CelebA, FDDB, WIDER FACE) to train and evaluate our proposed model. We then fine-tuned our model on a neonatal research dataset involving 228 videos from 114 recording sessions of 113 independent infants. Before fine-tuning, our model achieved an AP50 of 0.87, surpassing the performance of three state-of-the-art general face detectors. Performance improved further to an AP50 of 0.96 after clinical-domain adaptation. Evaluating face detection performance across different datasets remains a challenge due to the lack of publicly available neonatal datasets. Prioritising the creation of such datasets, while upholding appropriate privacy safeguards and ethical standards in their creation and use, would greatly support further progress in this field.

16.
arXiv (CS.LG) 2026-06-16

GPT-Based Fast Simulation of CLAS12 Detector Hits via Conditional Autoregressive Generation

arXiv:2606.16035v1 Announce Type: cross Abstract: Modern particles physics experiments have demonstrated an increasing need for fast, high-fidelity detector simulation as detector components have improved and subsequent computational requirements approach the limits of available resources. Recently, deep generative models have emerged as a promising alternative to traditional Monte-Carlo methods, with recent works drawing inspiration from large language models (LLMs) and self-supervised next-token prediction methods. In this work, we present an application of a GPT-style autoregressive transformer as a fast surrogate model for the calorimeter inside the CLAS12 experiment at the Thomas Jefferson National Accelerator Facility. The model is conditioned on incident momentum and generates realistic detector hits autoregressively across all nine calorimeter layers as sequences of strip, ADC, and TDC tokens. We demonstrate that the model faithfully reproduces hit multiplicity, spatial distributions, energy deposits, and the energy-momentum response of the electromagnetic calorimeter. The generator achieves inference rates exceeding 700 events per second on a single GPU, providing a substantial speedup over traditional Geant4-based simulations while maintaining physics fidelity essential for high-luminosity experimental programs.

17.
arXiv (CS.CV) 2026-06-18

Beyond the Linear Separability Ceiling: Aligning Representations in VLMs

A challenge in advancing Visual-Language Models (VLMs) is determining whether their failures on abstract reasoning tasks, such as Bongard problems, stem from flawed perception or faulty top-down reasoning. To disentangle these factors, we introduce a diagnostic framework centered on the Linear Separability Ceiling (LSC), the performance achievable by a linear classifier on a VLM's raw visual embeddings. Applying this framework to state-of-the-art VLMs, we uncover a pervasive ''alignment gap'', where most models fail to generatively outperform the linear separability of their representations. We find that the few models surpassing this ceiling do so via two mechanisms: by further refining visual representations into a more linearly separable format or by executing non-linear decision logic. We demonstrate that this bottleneck is not a fundamental limitation but a solvable visual alignment issue. Our method augments standard next-token prediction with a contrastive objective to restructure the visual manifold into a more one-dimensionally linear geometry, improving image-to-image comparison and enabling models to significantly surpass the LSC on abstract compositional reasoning tasks.

18.
bioRxiv (Bioinfo) 2026-06-11

DModE: An end-to-end framework for Differential Modification and Expression Analysis of Nanopore direct RNA sequencing data

Summary: Nanopore direct RNA sequencing (DRS) enables simultaneous quantification of transcript abundance and RNA modifications from native RNA molecules, providing a unique opportunity to study transcriptional and epitranscriptomic regulation within a single experiment. However, comprehensive analysis of DRS data remains challenging, as existing workflows typically focus on individual processing steps and often require manual integration of multiple software packages for expression analysis, modification detection, statistical testing, and visualization. Furthermore, integrated differential expression and differential RNA modification analysis at both gene and isoform resolution remains poorly supported by current workflows. Here, we present DModE (Differential Modification and Expression Analysis), an end-to-end framework for integrated analysis of Nanopore DRS data. DModE combines an Epi2ME-compatible Nextflow preprocessing workflow with a dedicated Python package for downstream statistical analysis, visualization, and reporting. The framework supports differential gene and isoform expression analysis, differential RNA modification analysis at genome and transcript level, metagene profiling, exploratory epitranscriptomic analyses, and integrated assessment of relationships between expression and modification dynamics. Results are automatically summarized in interactive HTML reports, facilitating reproducible and accessible data interpretation. By integrating transcriptomic and epitranscriptomic analyses within a single framework, DModE substantially simplifies comprehensive DRS data analysis and lowers the barrier for studying RNA modification biology using Nanopore sequencing.

19.
arXiv (CS.CV) 2026-06-11

Right Regions, Wrong Labels: Semantic Label Flips in Segmentation under Correlation Shift

The robustness of machine learning models can be compromised by spurious correlations between non-causal features in the input data and target labels. A common way to test for such correlations is to train on data where the label is strongly tied to some non-causal cue, then evaluate on examples where that tie no longer holds. This idea is well established for classification tasks, but for semantic segmentation the specific failure modes are not well understood. We show that a model may achieve reasonable overlap while assigning the wrong semantic label, swapping one plausible foreground class for another, even when object boundaries are largely correct. We focus on this semantic label-flip behaviour and quantify it with a simple diagnostic (Flip) that counts how often ground truth foreground pixels are assigned the wrong foreground identity while remaining predicted as foreground. In a setting where category and scene are correlated during training, increasing the correlation consistently widens the gap between common and rare test conditions and increases these within-object label swaps on counterfactual groups. Overall, our results motivate assessing segmentation robustness under distribution shift beyond overlap by decomposing foreground errors into correct pixels, flipped-identity pixels, and missed-to-background pixels. We also propose an entropy-based, ground truth label-free `flip-risk' score, which is computed from foreground identity uncertainty, and show that it can flag flip-prone cases at inference time. Code is available at https://github.com/acharaakshit/label-flips.

20.
medRxiv (Medicine) 2026-06-17

Identifying anaphylaxis using weakly-supervised prediction models and natural language processing

Objectives Scalable computable phenotyping algorithms are critical for conducting high-throughput disease-outcome research in large, distributed-data electronic health record (EHR) and claims data settings. We developed and evaluated a claims- and EHR-based computable phenotyping algorithm for anaphylaxis, a rare acute condition that is challenging to accurately identify using claims data alone. Materials and Methods Potential anaphylaxis events came from two healthcare systems (Kaiser Permanente Washington [KPWA] and Vanderbilt University Medical Center [VUMC]). We engineered features from clinical text using automated natural language processing (NLP) methods. We then developed a phenotyping algorithm using four NLP- and diagnosis code-based silver labels (proxies for the gold-standard labels). Gold-standard abstracted outcomes were used to evaluate algorithm performance. Results The largest area under the receiver operating characteristic curve (AUC) was 0.931 for an NLP-based silver-label model at KPWA. Depending on the model and healthcare system site, positive predictive value (PPV) and sensitivity at the threshold of predicted probability that maximized F1 score ranged from 0.52 to 0.77 (PPV) and 0.78 to 1 (sensitivity). Discussion NLP-based silver-label models had large AUC at KPWA but not at VUMC. This may be because clinical text at KPWA is only available for outpatient encounters and secure messaging. High sensitivity for identifying anaphylaxis can be obtained using our best-performing models. Conclusion The best-performing models had better PPV and sensitivity tradeoffs than prior bespoke anaphylaxis models with costly, manually curated features. The simplicity of the approach compared to traditional phenotyping methods allows it to be deployed easily at multiple health care systems.

21.
arXiv (CS.LG) 2026-06-16

Machine learning enables roughness-driven inverse design of milling processes

arXiv:2606.16032v1 Announce Type: cross Abstract: Interest in applying data-driven approaches in manufacturing has grown significantly, particularly for mapping complex, high-dimensional relationships. The milling process is one area where predictive models can link influential parameters to surface roughness metrics prior to in situ operations. While this approach offers clear advantages, it faces challenges due to limited datasets and robustness issues in inverse design paradigms. To address these challenges, this paper proposes a machine learning (ML)-based framework for the inverse design of the surface milling process, with a focus on surface roughness as the design objective. The framework employs forward training of two ML models, a deep neural network (DNN) and a random forest (RF) ensemble, both developed using a high-fidelity synthetic dataset generated from a computational simulation framework. These trained models are integrated into a Bayesian optimization (BO) procedure to overcome the multiplicity problem arising from the many-to-one mapping inherent in the dataset. The approach identifies top-performing milling process configurations, considering both process and tool parameters, and presents them from the full solution space. The models achieve average relative errors below 5% when compared to reference results, thereby demonstrating the robustness and reliability of the proposed methodology.

22.
arXiv (CS.LG) 2026-06-16

Generative Molecular Design with Steerable and Granular Synthesizability Control

arXiv:2505.08774v2 Announce Type: replace-cross Abstract: Designing molecules that are both property-optimal and readily synthesizable is a central challenge in drug discovery. Existing works that do consider synthesizability can jointly output predicted synthesis routes for generated molecules. However, there has been minimal attention in addressing the ease of synthesis and with flexibility to incorporate desired reaction constraints. On the other hand, virtual screening searches for commercially available compounds, but imposes challenges when scaling to ultra-large (billion-size and beyond) chemical spaces. Here, we propose a generative design framework that unifies synthesis-constrained molecular design and ultra-large-scale virtual screening through steerable and granular synthesizability control. Generated molecules satisfy arbitrary multi-parameter optimization objectives with predicted synthesis routes satisfying mix-and-match constraints: including or avoiding certain reactions, incorporating specific building blocks, and minimizing synthesis route length. In an end-to-end in-house campaign targeting BRD4, we designed molecules synthesizable with specific selected reactions and building blocks, synthesized all six selected compounds, and identified two micromolar binders. We further demonstrate that reaction control enables efficient navigation of ultra-large make-on-demand chemical spaces to identify property-optimal candidates. By applying our framework to Chemspace's Freedom 4.0 make-on-demand space (142 billion molecules), we generated ~320k molecules (0.00023% of the library) on a single consumer-grade GPU (with only 8 GB GPU memory) and identified a micromolar Wee1 binder amongst 60 synthesized candidates. The single unified framework thus enables generating novel synthesizable molecules and retrieving catalogue-ready candidates, offering a flexible solution to mitigating the synthesizability bottleneck.

23.
arXiv (CS.AI) 2026-06-19

TerraMind: Large-Scale Generative Multimodality for Earth Observation

arXiv:2504.11171v5 Announce Type: replace-cross Abstract: We present TerraMind, the first any-to-any generative, multimodal foundation model for Earth observation (EO). Unlike other multimodal models, TerraMind is pretrained on dual-scale representations combining both token-level and pixel-level data across modalities. On a token level, TerraMind encodes high-level contextual information to learn cross-modal relationships, while on a pixel level, TerraMind leverages fine-grained representations to capture critical spatial nuances. We pretrained TerraMind on nine geospatial modalities of a global, large-scale dataset. In this paper, we demonstrate that (i) TerraMind's dual-scale early fusion approach unlocks a range of zero-shot and few-shot applications for Earth observation, (ii) TerraMind introduces "Thinking-in-Modalities" (TiM) – the capability of generating additional artificial data during finetuning and inference to improve the model output – and (iii) TerraMind achieves beyond state-of-the-art performance in community-standard benchmarks for EO like PANGAEA. The pretraining dataset, the model weights, and our code are open-sourced under a permissive license.

24.
arXiv (CS.AI) 2026-06-11

Bimanual Robot Manipulation via Multi-Agent In-Context Learning

arXiv:2604.20348v2 Announce Type: replace-cross Abstract: Language Models (LLMs) have emerged as powerful reasoning engines for embodied control. In particular, In-Context Learning (ICL) enables off-the-shelf, text-only LLMs to predict robot actions without any task-specific training while preserving their generalization capabilities. Applying ICL to bimanual manipulation remains challenging as the high-dimensional joint action space and tight inter-arm coordination constraints rapidly overwhelm standard context windows. To address this, we introduce BiCICLe (Bimanual Coordinated In-Context Learning), the first framework that enables standard LLMs to perform few-shot bimanual manipulation without fine-tuning. BiCICLe frames bimanual control as a multi-agent leader-follower problem, decoupling the action space into sequential, conditioned single-arm predictions. Evaluated on 13 tasks from the TWIN benchmark, BiCICLe achieves 70.5% average success rate, outperforming the best training-free baseline by 6.1 percentage points and surpassing most supervised methods. We also demonstrate superior real-world performance on 3 tasks without hardware-specific retraining.

25.
arXiv (CS.AI) 2026-06-16

Can Artificial Intelligence Accelerate Technological Progress? Researchers' Perspectives on AI in Manufacturing and Materials Science

arXiv:2511.14007v3 Announce Type: replace-cross Abstract: Artificial intelligence (AI) raises expectations of substantial increases in rates of technological progress, but such anticipations are often not connected to detailed ground-level studies of AI use in innovation processes. Accordingly, it remains unclear how and to what extent AI can accelerate innovation. To help to fill this gap, we explore and assess results from 32 interviews with U.S.-based academic manufacturing and materials sciences researchers experienced with AI and machine learning (ML) techniques. We found that AI was primarily used for modeling of materials and manufacturing processes, facilitating cheaper and more rapid search of design spaces for materials and manufacturing processes alike. Benefits included cost, time, and computation savings in technology development. However, AI/ML tools were unreliable outside design spaces for which dense data were already available; they required skilled and judicious application in tandem with older research techniques; and concerns were raised about the potential to detrimentally circumvent opportunities for disruptive theoretical advancement. Based on these results, we suggest there is reason for optimism about acceleration in sustaining innovations through the use of AI/ML; but that support for conventional empirical, computational, and theoretical research is required to maintain the likelihood of further disruptive advances in manufacturing and materials.