×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Lin Song ×
换一批
01.
arXiv (CS.AI) 2026-06-12

Muse Spark Safety & Preparedness Report

arXiv:2606.12429v1 Announce Type: cross Abstract: Muse Spark is the latest large language model developed by Meta. In this report, we first present evaluations for catastrophic risk domains under Meta's Advanced AI Scaling Framework, along with the evidence that informed our launch decision. We then discuss additional considerations, such as Muse Spark's broader content safety and behavioral profile, that are relevant to overall safety but fall outside the catastrophic risk domains governed by the Framework. Our preparedness results covering Chemical and Biological, Cybersecurity, and Loss of Control risks assess Muse Spark's deployment within Meta AI as presenting acceptable levels of residual risks under our Advanced AI Scaling Framework. We conducted a broad set of evaluations targeting dual-use and high-risk capabilities across these catastrophic risk domains. Those evaluations identified elevated risks prior to mitigations, with Chemical and Biological capabilities assessed as likely reaching the "high risk" category under the Advanced AI Scaling Framework before safeguards were applied. We have implemented a multi-layered set of mitigations that address the identified risks, and Muse Spark demonstrates state-of-the-art refusal across a range of benchmarks related to hazardous workflows in chemistry and biology. We therefore release Muse Spark as the underlying model of Meta AI.

02.
arXiv (CS.AI) 2026-06-17

Brick-DICL: Dynamic In-Context Learning for Automated Brick Schema Classification

arXiv:2606.17637v1 Announce Type: new Abstract: Building Management Systems (BMS) are essential for optimizing energy efficiency and operational performance in modern buildings. However, the lack of standardization across BMS points from different manufacturers creates significant barriers to integration and data utilization. While the Brick schema offers a standardized ontology for building systems, mapping BMS points to appropriate Brick classes presents three critical challenges: (i) the extensive number of Brick classes (936 in the latest version), (ii) limited domain-specific knowledge in large language models (LLMs), and (iii) substantial manual effort required for verification. To address these challenges, we propose Brick-DICL, a two-stage dynamic in-context learning framework for automated Brick schema classification. Brick-DICL consists of two primary components: metadata-RAG, which retrieves relevant examples to enhance LLMs' domain knowledge, and class-RAG, which narrows down potential Brick classes to address the large classification space. Additionally, we implement a multi-LLM filtering mechanism that compares predictions across multiple models, flagging low-confidence classifications for human review. As a result: (i) General: Brick-DICL is applicable to any building management system regardless of manufacturer or metadata format; (ii) Novel and Powerful: as the first dynamic in-context learning approach for Brick schema classification, Brick-DICL achieves significant classification accuracy improvements on building datasets, outperforming existing methods; (iii) Efficient: our multi-LLM filtering strategy reduces manual verification effort, enabling rapid digital building onboarding. Extensive experiments demonstrate Brick-DICL's effectiveness across diverse building datasets, accelerating the path toward standardized, interoperable building management systems.

03.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

04.
arXiv (CS.AI) 2026-06-15

Generalized Discrete Diffusion with Self-Correction

arXiv:2603.02230v2 Announce Type: replace-cross Abstract: Self-correction is an effective technique for maintaining parallel sampling in discrete diffusion models with minimal performance degradation. Prior work has explored self-correction at inference time or during post-training; however, such approaches often suffer from limited generalization and may impair reasoning performance. GIDD pioneers pretraining-based self-correction via a multi-step BERT-style uniform-absorbing objective. However, GIDD relies on a continuous interpolation-based pipeline with opaque interactions between uniform transitions and absorbing masks, which complicates hyperparameter tuning and hinders practical performance. In this work, we propose a Self-Correcting Discrete Diffusion (SCDD) model to reformulate pretrained self-correction with explicit state transitions and learn directly in discrete time. Our framework also simplifies the training noise schedule, eliminates a redundant remasking step, and relies exclusively on uniform transitions to learn self-correction. Experiments at the GPT-2 scale demonstrate that our method enables more efficient parallel decoding while preserving generation quality.

05.
arXiv (CS.CV) 2026-06-11

TopoHR: Hierarchical Centerline Representation for Cyclic Topology Reasoning in Driving Scenes with Point-to-Instance Relations

Topology reasoning is crucial for autonomous driving. Current methods primarily focus on instance-level learning for centerline detection, followed by a sequential module for topology reasoning that relies on simplified MLP layers. Moreover, they often neglect the importance of point-to-instance (P2I) relationships in topology reasoning. To address these limitations, we present TopoHR (Topological Hierarchical Representation), a novel end-to-end framework that establishes cyclic interaction between centerline detection and topology reasoning, allowing them to iteratively enhance each other. Specifically, we introduce a hierarchical centerline representation including point queries, instance queries, and semantic representations. These multi-level features are seamlessly integrated and fused within a hierarchical centerline decoder. Furthermore, we design a hierarchical topology reasoning module that captures both fine-grained P2I relationships and global instance-to-instance (I2I) connections within a unified architecture. With these novel components, TopoHR ensures accurate and robust topology reasoning. On the OpenLane-V2 benchmark, TopoHR refreshes state-of-the-art performance with significant improvements. Notably, compared with previous best results, TopoHR achieves +3.8 in $\mathrm{DET}_{l}$, +5.4 in $\mathrm{TOP}_{ll}$ on $subset_A$ and +11.0 in $\mathrm{DET}_{l}$, +7.9 in $\mathrm{TOP}_{ll}$ on $subset_B$, validating the effectiveness of the proposed components. The code will be shared publicly at https://github.com/Yifeng-Bai/TopoHR.git.

06.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

07.
arXiv (CS.CL) 2026-06-11

Redesign Mixture-of-Experts Routers with Manifold Power Iteration

Router is the cornerstone component to the Mixture-of-Experts models. Serving as expert proxies, the rows of the router matrix compute their similarity to the MoE inputs to determine which subset of experts is activated. Ideally, each router row is designed to encode the expert matrix into this representative vector, such that its dot-product with token can better reflect token-expert affinity. However, there exists no design principles to enforce this condensation. In this paper, we propose to align each router row with the principal singular direction of the associated expert, as this direction provides the most expressive mathematical description of a matrix. Based on this principle, we propose a router redesign with Manifold Power Iteration (MPI). Specifically, it introduces a "Power-then-Retract" paradigm, where a power iteration step is performed on the router weights, followed by a retraction to impose a norm constraint to ensure both efficiency and stability. Theoretically, we show that MPI drives router rows to converge toward the principal singular directions of associated experts. Empirically, we pretrain MoE model across scales from 1B to 11B parameters to confirm that this alignment facilitates more effective MoE models.

08.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

09.
arXiv (CS.CV) 2026-06-11

ReMoT: Reinforcement Learning with Motion Contrast Triplets

We present ReMoT, a unified training paradigm to systematically address the fundamental shortcomings of VLMs in spatio-temporal consistency – a critical failure point in navigation, robotics, and autonomous driving. ReMoT integrates two core components: (1) A rule-based automatic framework that generates ReMoT-16K, a large-scale (16.5K triplets) motion-contrast dataset derived from video meta-annotations, surpassing costly manual or model-based generation. (2) Group Relative Policy Optimization, which we empirically validate yields optimal performance and data efficiency for learning this contrastive reasoning, far exceeding standard Supervised Fine-Tuning. We also construct the first benchmark for fine-grained motion contrast triplets to measure a VLM's discrimination of subtle motion attributes (e.g., opposing directions). The resulting model achieves state-of-the-art performance on our new benchmark and multiple standard VLM benchmarks, culminating in a remarkable 25.1% performance leap on spatio-temporal reasoning tasks.

10.
arXiv (CS.CV) 2026-06-16

GRACE: Boosting Video MLLMs with Grounded Action-Centric Evidence for Viewer Sentiment Prediction

Viewer sentiment prediction in video advertisements aims to infer the latent affective response evoked in the audience. To bridge the gap between what is shown and what is felt, models must deduce hidden viewer emotions from explicit visual narratives, concrete character-object interactions, and visible textual cues. However, standard Multimodal Large Language Models (MLLMs) typically rely on holistic frame representations, which leave these fine-grained, affect-relevant events implicit and complicate precise emotional reasoning. To address this, we propose a grounded action-centric evidence augmentation framework that enhances video MLLMs' clue extraction and comprehension by introducing explicit event structure and localized visual evidence. Our method extracts temporally ordered subject-verb-object (SVO) triplets and auxiliary visible textual cues from action-centric video descriptions, grounds subject and object entities as visual entity crops, and then enables the MLLM to perform clue-enhanced emotional reasoning based on these extracted structured clues. In this way, action triplets specify "what happens", while grounded visual entity crops anchor "who or what participates in each event" to concrete visual evidence. Experiments on the Pitts dataset show consistent improvements over Qwen2.5-VL and Qwen3-VL baselines. Ablation studies, cross-dataset evaluation on AdsQA, and transfer experiments on an emotion-focused TVQA subset further support the effectiveness and generalization of our approach.

11.
arXiv (CS.CL) 2026-06-15

An Empirical Study of Automating Agent Evaluation

Agent evaluation requires assessing complex multi-step behaviors involving tool use and intermediate reasoning, making it costly and expertise-intensive. A natural question arises: can frontier coding assistants reliably automate this evaluation process? Our study shows that simply prompting coding assistants is insufficient for this task. Without domain-specific evaluation knowledge, frontier coding assistants achieve only a 30% execution success rate and produce over-engineered evaluations averaging 12+ metrics per agent, indicating that strong coding ability does not automatically translate to reliable agent evaluation. We introduce EvalAgent, an AI assistant that automates the end-to-end agent evaluation pipeline. EvalAgent encodes evaluation domain expertise as evaluation skills (procedural instructions, reusable code and templates, and dynamically retrieved API documentation) that compose into a trace-based pipeline producing complete evaluation artifacts including metrics, executable code, and reports. To systematically assess generated evaluations, we introduce a meta-evaluation framework alongside AgentEvalBench, a benchmark comprising 20 agents, each paired with evaluation requirements and test scenarios. We further propose the Eval@1 metric to measure whether generated evaluation code both executes and yields meaningful results on the first run. Our experiments show that EvalAgent produces focused evaluations, improving Eval@1 from 17.5% to 65%, and achieving 79.5% human expert preference over baseline approaches. Further ablation studies show that evaluation skills are critical for handling complex evaluation: removing them causes Eval@1 to drop significantly from 65% to 30%.

12.
arXiv (CS.CV) 2026-06-19

HEad and neCK TumOR (HECKTOR) 2025: Benchmark of Segmentation, Diagnosis, and Prognosis in Multimodal PET/CT

Head and neck cancers (HNC) represent a significant global health burden, with accurate tumor delineation being essential for effective radiotherapy planning. The complexity of the oropharyngeal anatomy, combined with the heterogeneous appearance of tumors on imaging, makes manual segmentation time-intensive and subject to inter-observer variability. Beyond segmentation, predicting long-term clinical outcomes, such as recurrence-free survival (RFS), and determining human papillomavirus (HPV) status from noninvasive imaging, remain challenging yet clinically valuable goals. The HECKTOR 2025 challenge addresses these needs by establishing a comprehensive benchmark for automated HNC analysis using multimodal PET/CT imaging and electronic health records. Building on previous editions (2020-2022), this challenge features an expanded multi-institutional dataset comprising over 1,100 patients from 10 centers worldwide. Participants were tasked with three complementary objectives: (1) segmenting primary gross tumor volumes (GTVp) and metastatic lymph nodes (GTVn), (2) predicting recurrence-free survival, and (3) classifying HPV status. The challenge attracted 35 registered teams, with 15 final submissions evaluated on a held-out test set. Top-performing algorithms achieved a mean Dice similarity coefficient of 0.75 for segmentation, a concordance index of 0.66 for survival prediction, and a balanced accuracy of 0.56 for HPV classification. This paper presents a comprehensive analysis of the submitted methodologies, evaluates their performance across different lesion characteristics, and discusses their implications for clinical translation in automated oncology workflows and decision support systems.

13.
arXiv (CS.CV) 2026-06-17

Phys4D: Fine-Grained Physics-Consistent 4D Modeling from Video Diffusion

Recent video diffusion models have achieved impressive capabilities as large-scale generative world models. However, these models often struggle with fine-grained physical consistency, exhibiting physically implausible dynamics over time. In this work, we present Phys4D, a pipeline for learning physics-consistent 4D world representations from video diffusion models. Phys4D adopts a three-stage training paradigm that progressively lifts appearance-driven video diffusion models into physics-consistent 4D world representations. We first bootstrap robust geometry and motion representations through large-scale pseudo-supervised pretraining, establishing a foundation for 4D scene modeling. We then perform physics-grounded supervised fine-tuning using simulation-generated data, enforcing temporally consistent 4D dynamics. Finally, we apply simulation-grounded reinforcement learning to correct residual physical violations that are difficult to capture through explicit supervision. To evaluate fine-grained physical consistency beyond appearance-based metrics, we introduce a set of 4D world consistency evaluation that probe geometric coherence, motion stability, and long-horizon physical plausibility. Experimental results demonstrate that Phys4D substantially improves fine-grained spatiotemporal and physical consistency compared to appearance-driven baselines, while maintaining strong generative performance. Our project page is available at https://sensational-brioche-7657e7.netlify.app/

14.
arXiv (CS.CL) 2026-06-12

MaxProof: Scaling Mathematical Proof with Generative-Verifier RL and Population-Level Test-Time Scaling

We present MaxProof, a population-level test-time scaling framework for competition-level mathematical proof in the MiniMax-M3 series. M3 first trains three proof-oriented capabilities – proof generation, proof verification, and critique-conditioned proof repair – using a defense-in-depth generative verifier engineered for low false-positive rate. These capabilities are merged into a single released M3 model. At test time, MaxProof treats the model as a generator, verifier, refiner, and ranker, searches over a population of candidate proofs, and returns one final proof through tournament selection. With MaxProof test-time scaling, the M3 model reaches 35/42 on IMO 2025 and 36/42 on USAMO 2026, exceeding the human gold-medal threshold on both.

15.
arXiv (CS.CL) 2026-06-12

Unsafer in Many Turns: Benchmarking and Defending Multi-Turn Safety Risks in Tool-Using Agents

LLM-based agents are becoming increasingly capable, yet their safety lags behind. This creates a gap between what agents can do and should do. This gap widens as agents engage in multi-turn interactions and employ diverse tools, introducing new risks overlooked by existing benchmarks. To systematically scale safety testing into multi-turn, tool-realistic settings, we propose a principled taxonomy that transforms single-turn harmful tasks into multi-turn attack sequences. Using this taxonomy, we construct MT-AgentRisk (Multi-Turn Agent Risk Benchmark), the first benchmark to evaluate multi-turn tool-using agent safety. Our experiments reveal substantial safety degradation: the Attack Success Rate (ASR) increases by 16% on average across open and closed models in multi-turn settings. To close this gap, we propose ToolShield, a training-free, tool-agnostic, self-exploration defense: when encountering a new tool, the agent autonomously generates test cases, executes them to observe downstream effects, and distills safety experiences for deployment. Experiments show that ToolShield effectively reduces ASR by 30% on average in multi-turn interactions. Our code is available at https://github.com/CHATS-lab/ToolShield.

16.
arXiv (CS.CL) 2026-06-16

Dual-Uncertainty Guided Policy Learning for Multimodal Reasoning

Reinforcement learning with verifiable rewards (RLVR) has advanced reasoning capabilities in multimodal large language models. However, existing methods typically treat visual inputs as deterministic, overlooking the perceptual ambiguity inherent to the visual modality. Consequently, they fail to distinguish whether a model's uncertainty stems from complex reasoning or ambiguous perception, preventing the targeted allocation of exploration or learning signals. To address this gap, we introduce DUPL, a dual-uncertainty guided policy learning approach for multimodal RLVR that quantifies and leverages both perceptual uncertainty (via symmetric KL divergence) and output uncertainty (via policy entropy) to guide policy updates. By establishing an uncertainty-driven feedback loop and employing a dynamic branch prioritization mechanism, DUPL recalibrates the policy advantage to focus learning on states with high perceptual or decisional ambiguity, enabling effective targeted exploration beyond passive data augmentation. Evaluated on diverse multimodal reasoning benchmarks spanning mathematical and general domains, DUPL achieves solid gains. It improves Qwen2.5-VL accuracy by up to $12.3%$ (3B) and $7.9%$ (7B), and Qwen3-VL-Instruct by up to $10.7%$ (4B) and $12.4%$ (8B), consistently outperforming GRPO, while seamlessly generalizing to alternative algorithms (DAPO, $+6.5%$ avg) and architectures (LLaVA-OneVision-1.5, $+4.7%$ avg). These results demonstrate that DUPL is an effective and generalizable approach for multimodal RLVR.

17.
arXiv (CS.CV) 2026-06-18

APT: Atomic Physical Transitions for Causal Video-Language Understanding

Physical events are not understood by their names alone, but by the causal state changes that compose them. A clip-level label such as "bounce" can be correct while hiding the process that makes the event physically valid, from support loss and contact onset to rebound and settling. To make this hidden process explicit, we introduce Atomic Physical Transitions (APTs): minimal, temporally localized state changes that bind a visible cue to an active physical mechanism and before/after dynamical regimes. An APT chain represents a video as an ordered causal transition sequence rather than a single aggregate event label: event labels tell what happened; APT chains explain why it happened. To make APTs learnable by VLMs, we construct mixed-source APT data from human annotations and simulator ground truth, covering 14 transition types across contact, gravity, friction, and rotation/stability, with 27,303 timed instances over 1,246 trials. Using this data, we find that current VLMs miss transition-level physics, with zero-shot recall at most 14% and errors dominated by missed transitions. Direct fine-tuning on APT chains improves transition detection but causes event-level forgetting, indicating that the model learns a specialized answer format rather than a reusable physical representation. We therefore propose APT-Tune, a parameter-efficient recipe that teaches VLMs to use causal transitions without forgetting how to answer video questions. It combines image-pad-aware supervision, format-conditional co-training, and mechanism-conditioned domain-to-type decoding to make APT learning format-robust and physically grounded. With only 11 M LoRA parameters on Qwen3-VL-2B, APT-Tune substantially improves APT recall while also improving event-level video transfer. These results show that APTs are not a new answer format, but a human-aligned causal supervision signal for physical video understanding.

18.
arXiv (CS.AI) 2026-06-16

RetailBench: Benchmarking long horizon reasoning and coherent decision making of LLM agents in realistic retail environments

arXiv:2606.15862v1 Announce Type: new Abstract: Large language model (LLM) agents have made rapid progress on short-horizon, well-scoped tasks, yet their ability to sustain coherent decisions in dynamic long-horizon environments remains uncertain. We introduce RetailBench, a data-grounded simulation benchmark for evaluating tool-using LLM agents in single-store supermarket operation. RetailBench models retail management as a partially observable decision process and is designed to support thousand-day-scale simulations. In this environment, agents must manage pricing, replenishment, supplier selection, shelf assortment, inventory aging, customer feedback, external events, and cash-flow constraints. We evaluate seven contemporary LLMs under representative agent frameworks over a 180-day evaluation horizon and compare them with a privileged oracle policy. Results show substantial variation across models: only a small subset survives the full evaluation horizon, and even the strongest LLM runs remain substantially behind the oracle policy in final net worth and sales outcomes. Behavioral analysis attributes these gaps to incomplete evidence acquisition, surface-level decision making, and the lack of a consistent long-horizon policy. RetailBench provides a controlled testbed for studying reliable autonomy in economically grounded long-horizon decision-making.

19.
arXiv (CS.CV) 2026-06-12

LaME: Learning to Think in Latent Space for Multimodal Embedding via Information Bottleneck

Reasoning-driven universal multimodal embedding has advanced rapidly by introducing Chain-of-Thought (CoT) reasoning into the embedding pipeline. Despite the strong performance across both general and complex tasks, this paradigm suffers from two core limitations: (i) autoregressive CoT reasoning incurs high computational cost, making it impractical for low-latency retrieval; and (ii) embedding performance is heavily coupled with CoT annotation quality, making large-scale training unreliable. These raise fundamental questions: Is textual CoT the optimal form of reasoning for embedding, and can effective embedding reasoning be accomplished in latent space? To this end, we propose LaME (Latent Reasoning Multimodal Embedding), which formulates embedding-oriented latent reasoning as a weakly supervised information bottleneck. LaME employs K learnable reason tokens as a fixed-capacity bottleneck, completing all reasoning within a single forward pass. The two weak supervision signals structurally decouple contrastive from autoregressive objectives and eliminate dependence on CoT annotations, while a two-stage training pipeline ensures stable convergence. Experiments on MMEB-v2 and MRMR show that LaME achieves competitive performance, surpassing some explicit CoT-based models, while delivering 60x faster inference than explicit CoT methods and 2x faster than latent baselines with throughput comparable to discriminative embedding models. Code will be released.

20.
arXiv (CS.AI) 2026-06-17

Temporal Motif-aware Graph Test-time Adaptation for OOD Blockchain Anomaly Detection

arXiv:2605.29526v2 Announce Type: replace-cross Abstract: Ever-evolving transaction patterns have significantly hindered anomaly detection on emerging cryptocurrency blockchains due to the vast number of addresses and diverse anomalous behaviors. Recently, advanced Graph Anomaly Detection (GAD) approaches applied to blockchains have faced two critical challenges: adversarial pattern evolution by malicious actors and the out-of-distribution (OOD) problem caused by varied transaction semantics on blockchains. To address these challenges, we propose a novel framework termed TEmporal Motif-aware Graph Test-Time Adaptation (TEMG-TTA). First, we comprehensively capture the 3-node temporal motif distribution of each active address using an efficient computational mechanism, enabling downstream temporal motif-aware graph learning. Second, we design a simple yet effective test-time adaptation strategy to facilitate the sharing of common patterns between training and testing graphs. Extensive experiments on 5 real-world datasets demonstrate that our proposed TEMG-TTA outperforms state-of-the-art GAD approaches by an average of 54.88\%. A further case study on interpretable motif patterns reveals that TEMG-TTA explicitly characterizes the complex transaction patterns of anomalous addresses, thereby verifying the effectiveness of our technical designs. Our code is publicly available at https://github.com/LuoXishuang0712/TEMG-TTA/.

21.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

22.
arXiv (CS.CL) 2026-06-16

Depth-Attention: Cross-Layer Value Mixing for Language Models

Self-attention selects information freely across the sequence, but across depth, Transformers merely add each layer's output to the residual stream, so later layers cannot selectively reuse earlier-layer representations. Recent cross-layer methods improve this flow but operate on hidden states outside attention, adding state beyond the key-value cache at inference–a cost that becomes increasingly salient as modern LLMs compress the cache with grouped-query and multi-head latent attention. We introduce Depth-Attention, which performs this selection inside the attention module itself: before a layer attends over the sequence, its query attends over the keys of earlier layers at the same token position and mixes their values into the value that self-attention then reads. Because Depth-Attention reuses the standard attention queries, keys, and value-cache slots, storing depth-mixed values in place of the original values, it adds no parameters and introduces no persistent inference state beyond the standard key-value cache–the same cache size as a vanilla decoder and less than hidden-state-based cross-layer methods. On Qwen3-style decoders at 1.5B and 3B parameters, Depth-Attention attains the lowest perplexity and the highest average downstream accuracy, improving over the vanilla Transformer by up to 2.3 accuracy points and surpassing strong cross-layer baselines in perplexity and average accuracy, while adding under 0.01% extra arithmetic FLOPs and no additional persistent inference state. The gains hold from 360M to 3B parameters and extend to looped Transformers.

23.
arXiv (CS.CL) 2026-06-19

When Lower Privileges Suffice: Investigating Over-Privileged Tool Selection in LLM Agents

As LLM agents increasingly select tools autonomously, their choices among tools with different privileges become safety-relevant. However, prior tool-selection studies focus on safety-agnostic metadata preferences, leaving privilege-sensitive choices underexplored. To address this gap, we study over-privileged tool selection, in which an agent selects or escalates to a higher-privilege tool despite a sufficient lower-privilege alternative. We introduce ToolPrivBench to evaluate whether agents choose higher-privilege tools despite sufficient lower-privilege alternatives, measuring both initial selection and escalation after transient tool failures. Across eight domains and five recurring risk patterns, we find that over-privileged tool selection is common among mainstream LLM agents and is further amplified by transient failures. We further find that general safety alignment does not reliably transfer to least-privilege tool choice, while prompt-level controls provide only limited mitigation under transient failures. We therefore introduce a privilege-aware post-training defense that teaches agents to prefer sufficient lower-privilege tools and escalate only when necessary. Our mitigation experiments show that this defense substantially reduces unnecessary high-privilege tool use while preserving general capabilities.

24.
arXiv (CS.AI) 2026-06-16

RIDGECUT: Learning Graph Partitioning with Rings and Wedges

arXiv:2505.13986v4 Announce Type: replace-cross Abstract: Reinforcement learning (RL) has shown promise for combinatorial optimization problems on graphs by learning heuristics that generalize across instances. However, effectively incorporating domain knowledge into RL frameworks for graph partitioning remains challenging, as existing approaches typically rely on unconstrained node-level actions that lead to large action spaces and inefficient exploration. In this paper, we propose RidgeCut, an RL framework that constrains the action space to enforce structure-aware partitioning in the Normalized Cut problem. Using transportation networks as a motivating example, we introduce a novel concept that leverages domain knowledge about urban road topology – where natural partitions often take the form of concentric rings and radial wedges. By transforming the graph into linear or circular representations, our method enables the use of transformer-based policies and efficient learning via Proximal Policy Optimization. The resulting partitions from RidgeCut are not only aligned with expected spatial layouts but also achieve lower normalized cuts compared to existing methods. Experimental results on synthetic and real-world traffic graphs demonstrate that RidgeCut consistently outperforms existing methods while exhibiting strong inductive generalization across graph sizes. Although motivated by road networks, RidgeCut provides a general mechanism for embedding structural priors into RL frameworks for graph partitioning.

25.
arXiv (CS.CL) 2026-06-18

DreamReasoner-8B: Block-Size Curriculum Learning for Diffusion Reasoning Models

Block diffusion language models accelerate decoding through parallel block-wise denoising, yet whether they can be reliably scaled for long chain-of-thought (CoT) reasoning remains unresolved. To this end, we develop DreamReasoner-8B, an open-source block diffusion reasoning model, and conduct a systematic study of how training and inference block sizes affect long-CoT reasoning. Our analysis reveals a stark performance disparity: training with large block sizes yields remarkably poor reasoning, whereas small block sizes preserve effective reasoning. To bridge this granularity gap, we propose block-size curriculum learning, which gradually transitions training from fine-grained to coarse-grained block sizes, thereby overcoming this limitation and enabling strong reasoning performance that generalizes across diverse inference block sizes. On mathematical and code reasoning benchmarks, DreamReasoner-8B achieves results competitive with leading open autoregressive models such as Qwen3-8B. This work establishes a practical foundation for efficient, reasoning-capable diffusion language models. We release our model at https://github.com/DreamLM/DreamReasoner.