×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Lim ×
换一批
01.
arXiv (CS.AI) 2026-06-12

Echo2ECG: Enhancing ECG Representations with Cardiac Morphology from Multi-View Echos

arXiv:2603.08505v2 Announce Type: replace-cross Abstract: Electrocardiography (ECG) is a low-cost, widely used modality for diagnosing electrical abnormalities like atrial fibrillation by capturing the heart's electrical activity. However, it cannot directly measure cardiac morphological phenotypes, such as left ventricular ejection fraction (LVEF), which typically require echocardiography (Echo). Predicting these phenotypes from ECG would enable early, accessible health screening. Existing self-supervised methods suffer from a representational mismatch by aligning ECGs to single-view Echos, which only capture local, spatially restricted anatomical snapshots. To address this, we propose Echo2ECG, a multimodal self-supervised learning framework that enriches ECG representations with the heart's morphological structure captured in multi-view Echos. We evaluate Echo2ECG as an ECG feature extractor on two clinically relevant tasks that fundamentally require morphological information: (1) classification of structural cardiac phenotypes across three datasets, and (2) retrieval of Echo studies with similar morphological characteristics using ECG queries. Our extracted ECG representations consistently outperform those of state-of-the-art unimodal and multimodal baselines across both tasks, despite being 18x smaller than the largest baseline. These results demonstrate that Echo2ECG is a robust, powerful ECG feature extractor. Our code is accessible at https://github.com/michelleespranita/Echo2ECG.

02.
arXiv (CS.LG) 2026-06-16

Filtered Conformal Ellipsoids for Graph-Native Time Series

arXiv:2606.17014v1 Announce Type: new Abstract: Joint prediction sets for multivariate time series should control a single event while adapting to cross-coordinate dependence. We study filtered conformal ellipsoids: a frozen state-space filter emits a one-step predictive mean and covariance, and split-conformal calibration is applied to the resulting Mahalanobis scores. The filter is used to choose the ellipsoid shape; conformal calibration chooses the scalar radius, so the construction benefits from a learned predictive covariance without relying on Gaussian tail probabilities for coverage. The main difficulty is that filtered scores are dependent and learned recurrent filters need not contract in their raw hidden state; we therefore analyse contraction in an observable predictive-law quotient that identifies hidden states producing the same future sequence of emitted Gaussian laws. Under a stable Bayes Gaussian-projection filter, covariance bounds, and a finite-horizon observability Fisher condition, small excess Gaussian negative log-likelihood implies contraction of the learned emitted laws. Combined with a threshold-autocovariance envelope this yields a Chebyshev-type approximate coverage bound for filtered split-conformal prediction under dependence; a sharper Bernstein-type bound requires an additional geometric-mixing concentration assumption. Under Gaussian oracle realisability we also obtain a near-oracle log-volume comparison within the class of conditionally valid Gaussian ellipsoid rules. We instantiate the framework with a GCN-GRU filter with diagonal-plus-low-rank covariance. On moderate-size graph-native traffic benchmarks (METRLA-$20$ and PEMSBAY-$50$), the learned filter gives sharper at-target ellipsoids than static-covariance and non-filter baselines; at full-graph scale and on non-graph-native datasets, factor and copula baselines can be stronger.

03.
arXiv (CS.CV) 2026-06-24

Hybrid Event Frame Sensors: Modeling, Calibration, and Simulation

Hybrid event-frame sensors integrate an Event Vision Sensor (EVS) and an Active Pixel Sensor (APS) within a single chip, combining the high dynamic range and low latency of the EVS with the rich spatial intensity information from the APS. While this tight integration offers compact and temporally precise imaging, the complex circuit architecture introduces nontrivial noise patterns that remain poorly understood and unmodeled. In this work, we present the first unified statistics-based imaging noise model that jointly describes the noise behavior of APS and EVS pixels. Our formulation explicitly incorporates photon shot noise, dark current noise, fixed-pattern noise, and quantization noise, and links EVS noise to illumination level and dark current. Based on this formulation, we further develop a calibration pipeline to estimate noise parameters from real data and provide a detailed analysis of both APS and EVS noise behaviors. Finally, we propose H-ESIM, a statistically grounded simulator that generates RAW frames and events under realistic jointly calibrated noise statistics. Experiments on two hybrid sensors validate our model across multiple imaging tasks, including video frame interpolation and deblurring, demonstrating strong transfer from simulation to real data.

04.
arXiv (CS.AI) 2026-06-15

PRISM: Perception Reasoning Interleaved for Sequential Decision Making

arXiv:2605.05407v2 Announce Type: replace Abstract: Scaling LLM-based embodied agents from text-only environments to complex multimodal settings remains a major challenge. Recent work identifies a perception-reasoning-decision gap in standalone Vision-Language Models (VLMs), which often overlook task-critical information. In this paper, we introduce PRISM, a framework that tightly couples perception (VLM) and decision (LLM) through a dynamic question-answer (DQA) pipeline. Instead of passively accepting the VLM's description, the LLM critiques it, probes the VLM with goal-oriented questions, and synthesizes a compact image description. This closed-loop interaction yields a sharp, task-driven understanding of the scene. We evaluate PRISM on the ALFWorld and Room-to-Room (R2R) benchmarks. We show that: (1) PRISM significantly outperforms state-of-the-art image-based models, (2) our Interactive goal-oriented perception pipeline yields systematic and substantial gains, and (3) PRISM is fully automatic, eliminating the need for handcrafted questions or answers.

05.
arXiv (CS.CV) 2026-06-16

Understanding Cross-Modal Contributions in Continual Vision-Language Models: A Theoretical Perspective

Continual vision-language models are commonly addressed through sequential fine-tuning; however, although this paradigm enables adaptation to new environments (tasks), it inherently emphasizes the contribution of previously learned environments (tasks) at the expense of the stability required to preserve previously acquired knowledge. While existing approaches have adequately studied continual learning and catastrophic forgetting in vision-language models (VLMs), the theoretical understanding of modality-specific contributions across a sequence of environments remains largely unexplored. In this paper, we present a new theoretical perspective to understand the cross-modal (vision-language) contributions to consecutive environments. We empirically evaluate our theoretical findings on large VLMs and demonstrate their effectiveness in capturing environment-level cross-modal contributions. Our analysis provides deeper insights into continual VLMs, highlighting their contribution robustness to varying task orders and inter-task similarities, and their improved generalization performance.

06.
arXiv (CS.CV) 2026-06-16

XPASS-Vis: A Dataset for Cross-Domain Personalized Image Aesthetic Assessment

Personalized image aesthetic assessment (PIAA) seeks to model, at the individual level, the subjective nature of aesthetic judgments toward artworks and photographs. Aesthetic preference is known to be both deeply personal and partially consistent across visual domains. Yet existing PIAA datasets and methods are largely confined to a single domain, or provide too few samples per annotator within each domain to enable personalization across domains. Consequently, the cross-domain generalization of personalized aesthetic preferences remains largely unexplored. To address this gap, we introduce XPASS-Vis, the first dataset explicitly designed for cross-domain PIAA. XPASS-Vis comprises 6,526 stimuli from three visual domains – art, fashion, and landscape – rated by 129 annotators, yielding 87,836 user-stimulus interactions, each annotated with an overall aesthetic score and nine aesthetic-emotion ratings. Notably, each annotator rated more than 200 stimuli per domain, providing sufficient per-domain coverage to support personalization both within and across domains. Moreover, we establish baseline models for cross-domain PIAA under unsupervised domain adaptation (UDA), where a model trained on a labeled source domain is transferred to an unlabeled target domain. A systematic evaluation of representative UDA approaches shows that the best-performing method recovers approximately 60\% (Spearman's $\rho$ = .28) of the supervised upper bound under a fully unsupervised setting. This provides encouraging evidence that personalized aesthetic preferences are, to a meaningful extent, transferable across visual domains. At the same time, a substantial gap remains, highlighting the need for PIAA-specific adaptation strategies. XPASS-Vis and the accompanying baselines provide a foundation for future research on cross-domain PIAA. All datasets and code will be made publicly available upon acceptance.

07.
bioRxiv (Bioinfo) 2026-06-23

Comorbidity structure as an inductive bias: Comparing output-head designs for multi-label prediction of diabetes and myocardial infarction complications

Background: Clinical complications are often predicted with separate sigmoid outputs, even when the target labels arise from related pathophysiological processes. This paper asks whether output-layer choice should reflect both predictive convenience and the biological structure assumed among complications. The central premise is that label-dependence mechanisms are explicit hypotheses about comorbidity, not generic modelling additions. Methods: Output-head assumptions were compared across two clinically distinct multi-label prediction tasks. In Type 2 diabetes (T2D), six heads were evaluated for nephropathy, neuropathy, and retinopathy: independent baseline, linear additive, multiplicative, symmetric conditional random field (CRF), residual multilayer perceptron (MLP), and combined additive-multiplicative. In myocardial infarction (MI), four heads were evaluated for ventricular tachycardia, ventricular fibrillation, and atrioventricular block: independent baseline, linear additive, multiplicative, and symmetric CRF. All experiments used five training data fractions and seven independent seeds, with the same shared-backbone protocol within each disease setting. Results: In T2D, the symmetric CRF gave the most consistent improvement pattern, ranking highest at full data and at the two lowest data fractions while adding only three interaction parameters. At 20% training data, it was the only interaction head whose aggregate mean exceeded the independent baseline. The residual MLP, despite 123 interaction parameters, remained below the baseline across all T2D fractions. In MI, rankings changed across fractions: the multiplicative head led at 80% and 60%, the CRF led at 100% and 20%, and the baseline led at 40%. The combined additive-multiplicative head did not improve robustness in T2D and showed the largest negative baseline-relative deviations at lower fractions. Conclusions: The findings support a biology-guided view of output-layer design. A small constrained mechanism was most useful when its symmetry matched the shared microvascular structure of T2D, whereas the heterogeneous electrophysiology of MI produced no stable winner. Output-layer choice should therefore be reported and defended as an assumption about disease structure instead of a routine hyperparameter decision.

08.
arXiv (CS.CL) 2026-06-16

daVinci-kernel: Co-Evolving Skill Selection, Summarization, and Utilization via RL for GPU Kernel Optimization

GPU kernel optimization represents a paradigm where functional correctness is assumed and execution efficiency is the objective. We present daVinci-kernel, a reinforcement learning framework that couples skill discovery with skill exploitation through a dynamically evolving skill library. daVinci-kernel jointly trains three agents sharing one LLM backbone: a Skill Selection Agent that retrieves relevant techniques via BM25 and LLM reranking, a Policy Agent that generates multi-turn CUDA/Triton kernels conditioned on selected skills, and a Skill Summary Agent that distills successful rollouts into reusable skills. Candidate skills are added only after execution-based verification confirms reproducible speedups. All three agents share a single LLM backbone, are initialized via a structured SFT cold start on diversity-filtered data, and are then jointly optimized end-to-end with multi-turn REINFORCE and per-agent advantage estimation. On KernelBench, daVinci-kernel-14B achieves 37.2%, 70.6%, and 32.2% on Level 1, Level 2, and Level 3 under the Fast$_1$ threshold, outperforming the strongest prior RL-trained model, Dr.Kernel-14B.

09.
arXiv (CS.CV) 2026-06-11

Plan-and-Verify Video Reward Reasoning with Spatio-Temporal Scene Graph Grounding

Reward models for text-to-video (T2V) generation guide post-training but often fail at fine-grained semantic alignment. We trace this to two structural weaknesses in existing reasoning-based reward models: they do not systematically verify every condition described in the prompt, and the visual evidence supporting each judgment remains implicit in their free-form reasoning. We propose SG-PVR, a video reward model that addresses these limitations through plan-and-verify reasoning grounded in spatio-temporal scene graphs. The verification plan decomposes the prompt into atomic claims, ensuring every requirement is checked. The spatio-temporal scene graph, encoding entities, attributes, and temporally-grounded relations, is extracted from the video and maintained as a persistent structured visual reference throughout reasoning. Each claim is verified against both the video and the scene graph, anchoring judgments in explicit visual evidence. SG-PVR achieves strong performance on semantic alignment, including fine-grained temporal semantics. As a test-time reranker, it further enhances compositional alignment in T2V generation.

10.
arXiv (math.PR) 2026-06-24

Sub-Poisson distributions: Concentration inequalities, optimal variance proxies, and closure properties

arXiv:2508.12103v2 Announce Type: replace Abstract: We introduce a nonasymptotic framework for sub-Poisson distributions with moment generating function dominated by that of a Poisson distribution. At its core is a new notion of optimal sub-Poisson variance proxy, analogous to the variance parameter in the sub-Gaussian setting. This framework allows us to derive a Bennett-type concentration inequality without boundedness assumptions and to show that the sub-Poisson property is closed under key operations including independent sums and convex combinations, but not under all linear operations such as scalar multiplication. We derive bounds relating the sub-Poisson variance proxy to sub-Gaussian and sub-exponential Orlicz norms. Taken together, these results unify the treatment of Bernoulli and Poisson random variables and their signed versions in their natural tail regime.

11.
arXiv (CS.AI) 2026-06-17

Cluster-Aware Dual-Level Test Specification Generation for Large-Scale Automotive Software Requirements

arXiv:2606.17197v1 Announce Type: cross Abstract: Generating test specifications that satisfy Automotive SPICE SWE.6 requirements becomes increasingly challenging and time-consuming as projects scale to thousands of requirements. Because this manual process often consumes weeks of engineering effort, automation becomes a critical necessity. However, standard Large Language Model (LLM) approaches struggle at scale: processing requirements individually discards vital inter-requirement dependencies, while feeding entire corpora at once exceeds context-window limits, leading to incomplete integration coverage and redundant test cases. This paper presents a novel "Cluster-then-Summarize" pipeline that addresses these limitations through three-stages. Requirements are embedded using sentence transformers and grouped using UMAP dimensionality reduction followed by HDBSCAN density-based clustering. This grouping utilizes an automatic minimum cluster size selection driven by a quality criterion combining normalized Silhouette and Calinski-Harabasz scores. A multi-level map-reduce summarization algorithm then distills each cluster into concise, domain-conformant descriptions while preserving quantitative thresholds and safety integrity levels. The pipeline exploits the derived cluster topology to generate test specifications at two levels: individual requirement verification and cluster-level integration tests that verify cross-requirement feature behavior. A nearby-cluster context mechanism provides bounded cross-feature awareness during each LLM call, and Retrieval-Augmented Generation grounds all outputs in ISO 26262 and ASPICE standards. Evaluation on automotive requirement datasets of varying scale demonstrates that the cluster-aware approach improves integration test coverage and maintains summarization fidelity compared to baseline methods while scaling efficiently to thousands of requirements.

12.
arXiv (CS.CV) 2026-06-16

UniDDT: Unifying Multimodal Understanding and Generation with Decoupled Diffusion Transformer

Unified Multimodal Models (UMMs) have emerged as a critical direction for general-purpose multimodal intelligence, integrating understanding and generation into a single framework. However, existing UMMs face prominent challenges: (1) the inherent learning conflicts between visual understanding and generation tasks, leading to suboptimal modeling in both tasks; (2) different understanding and generation visual spaces impeding scalability; (3) over-reliance on task-specific data that neglects the duality of text-image understanding and generation. To address these challenges, we propose UniDDT, which leverages a Noisy ViT encoder along with an LLM to unify semantic encoding for visual generation and understanding tasks, while employing a separate diffusion decoder to decouple diffusion decoding from text decoding. With this Noisy ViT encoder, UniDDT is able to leverage the latent space as a unified visual representation, enabling seamless compatibility between understanding and generation tasks. Thus, the scalability within the generation tasks and the semantic expressiveness within understanding tasks can be balanced. Also, we construct dual data structures from the same image-text pairs, fostering interdependence between the generation and understanding data to exploit their inherent duality. Extensive experiments demonstrate that UniDDT achieves effective unification of multimodal understanding and generation with enhanced semantic consistency and scalability. For visual generation tasks, our UniDDT achieves 0.87 GenEval score and 86.9 DPG overall score. For multimodal understanding tasks, our UniDDT achieves 1699.5 score on MME benchmark and 76.5 overall score on SEEDbench.

13.
arXiv (quant-ph) 2026-06-16

Boson Sampling as a Probe of Chaotic and Integrable Quantum Dynamics in a Photonic Chip

arXiv:2605.25398v2 Announce Type: replace Abstract: Quantum chaos plays a key role in understanding complex quantum dynamics, while integrated photonics offers unique advantages for quantum applications, including high-speed operation, scalability, and programmable unitary transformations. However, integrated photonic approaches to probing quantum chaos remain largely unexplored, owing to the absence of a clear connection between programmable photonic dynamics and established chaos diagnostics. In this work, we establish Fock-state boson sampling as a practical probe of quantum chaos by exploiting the sensitivity of multiphoton interference to the random-matrix properties of underlying single-particle unitary dynamics. More importantly, we design and fabricate a programmable quantum photonic chip to experimentally implement this framework, achieving the first integrated-photonic demonstration of quantum-chaos probes based on boson sampling. Experimental results show that the three complementary probes proposed in this work, namely the distance to Porter–Thomas statistics, Shannon entropy, and Out-of-Time-Ordered-Correlator-equivalent observables, exhibit close agreement with theoretical predictions and consistently distinguish chaotic and integrable dynamics. Our work provides a scalable route for investigating complex quantum dynamics on programmable photonic platforms while leveraging the intrinsic advantages of boson sampling through multiphoton interference and complex output statistics.

14.
arXiv (CS.CV) 2026-06-24

Predicting brain tumour enhancement from non-contrast MR imaging with artificial intelligence: a multi-cohort retrospective diagnostic accuracy study

Brain tumour MRI typically requires both pre- and post-contrast imaging, but gadolinium is not always desirable (frequent follow-up, renal impairment, allergy, paediatric patients). We developed and validated a deep learning model to predict tumour contrast enhancement from non-contrast MRI alone. We assembled 11,089 brain MRI studies (2006-2024) from 10 datasets across four countries and three continents, spanning adult and paediatric populations with glioma, meningioma, metastases, and post-resection appearances. Three architectures were trained to detect and segment enhancing tumour from T1w, T2w and FLAIR alone. Performance was assessed in a 1,109-study held-out test set (primary endpoint: patient-level enhancement detection; secondary: voxel-level Dice). Eleven expert radiologists attempted the same task on a 564-case subset (100 cases each), blinded to history, prior imaging, and referral. The best model, nnU-Net, achieved 83.0% balanced accuracy (95% CI 79.1-87.2; sensitivity 91.5%, specificity 74.4%) for detection, with R2 = 0.859 for enhancement volume. Of enhancing cases, 76.8% reached Dice >= 0.3, 67.5% >= 0.5, and 50.2% >= 0.7. Under blinded conditions, radiologists' majority vote was lower (71.7% balanced accuracy; sensitivity 77.6%, specificity 65.8%). The proportion reaching Dice >= 0.3 varied by pathology (meningioma 93%, presurgical glioma 76%, metastases 74%, postoperative glioma 74%) and was lowest for paediatric cases (45%). Deep learning can identify contrast-enhancing brain tumours from non-contrast MRI. These models show promise as a triage or decision-support adjunct, such as in flagging studies likely to enhance so that contrast can be added to a non-contrast protocol, and may reduce gadolinium dependence in neuro-oncology imaging. Future work should optimise these models with radiologists.

15.
arXiv (CS.AI) 2026-06-18

MIDS: Detecting Stealthy Masquerade and Tampering Attacks on CAN Bus via Bidirectional Mamba

arXiv:2606.18599v1 Announce Type: cross Abstract: The Controller Area Network (CAN) protocol is the primary communication standard for Electronic Control Units (ECUs) in modern vehicles, but its lack of encryption and authentication exposes it to a range of security threats. Existing intrusion detection systems are largely tuned to fabrication-style attacks (DoS, fuzzing, ID spoofing realised by frame injection), in which detection signals such as per-ID inter-arrival statistics are readily available. We instead address the harder masquerade setting[b37], in which an internal adversary substitutes a legitimate frame in-situ at its original transmission slot, preserving traffic periodicity and rendering traffic-statistic defences ineffective. We propose the Mamba Intrusion Detection System (MIDS), an innovative dual-stream framework that processes CAN identifiers and payloads in parallel and reconstructs their joint temporal semantics through bidirectional selective state-space modelling. To evaluate MIDS, we collected over 100 million CAN frames from a physical Tesla Model 3 across three driving regimes and synthesised 54 masquerade attack variants spanning ID-only, data-only, and combined modifications. MIDS attains an F1 of 96.94\% on this dataset, exceeding the strongest reproducible baseline by more than 8 percentage points, while sustaining a 1.147~ms single-window inference latency – ample headroom for real-time onboard deployment. To verify generalisation, we further evaluate MIDS on four public benchmarks (ROAD, CrySyS, OTIDS, CT\&T) covering both masquerade and injection scenarios; MIDS attains F1 from 93.70\% to 99.61\%, outperforming the strongest of eight reproduced baselines by up to 13.94 percentage points under a unified 5-fold protocol.

16.
arXiv (CS.CV) 2026-06-12

HairPort: In-context 3D-aware Hair Import and Transfer for Images

Transferring hairstyles between images is an important but challenging task in computer graphics, computer vision, and visual effects. It enables users to explore new looks without physically altering their hair, with applications in virtual try-on systems, augmented reality, and entertainment. Most prior works operate best under small pose gaps, and they fall short under large viewpoint and scale differences, where missing hair content must be synthesized rather than transferred. We propose HairPort, a 3D-aware hairstyle transfer framework that attempts to solve these issues by explicitly separating hair removal from transfer and enforcing geometric consistency before synthesis. We introduce a Bald Converter, which produces realistic bald versions of faces through LoRA-based in-context adaptation of FLUX.1 Kontext. To train our Bald Converter, we introduce a new dataset, Baldy, containing 6,000 paired bald and original images across diverse identities and conditions. We also use a 3D-Aware Transfer Pipeline that reconstructs and re-renders the reference hairstyle from the target viewpoint before compositing it onto the source image. Being 3D aware, our method supports large pose and scale discrepancies between the source and target. Finally, a conditional flow-matching generator synthesizes the transferred result from the bald source and geometry-aligned reference guidance. Together, our method enables accurate, pose-consistent, and identity-preserving hairstyle transfer, outperforming existing methods both qualitatively and quantitatively.

17.
arXiv (CS.CV) 2026-06-18

Investigation of Neural Network Methods for Reconstruction and Classification of Texture Images Under Conditions of Incomplete Information

The automated analysis of heterogeneous natural textures is frequently hindered by physical damage and data loss, presenting a significant challenge to computer vision. While deep learning has shown success in controlled environments, its application to complex geological materials under conditions of incomplete information remains underexplored. This study presents an integrated framework for the inpainting and classification of high-resolution core sample images. We propose an end-to-end pipeline that utilizes object detection for sample segmentation, followed by image inpainting using Generative Adversarial Networks (GANs) with Contextual Residual Aggregation (CRA) to reconstruct missing high-frequency details. Subsequently, we evaluate the performance of modern Transformer-based (Swin, ViT) and CNN architectures on the reconstructed data. Our experiments revealed a critical divergence between reconstruction quality and downstream utility: despite high structural fidelity (PSNR 28.7~dB, FID 74.01), classification accuracy plateaued at 53\%. To improve minority-class detection, we propose a confidence-based hybrid ensemble that raises MCA from 48\% to 58\%. These results highlight the limitations of current state-of-the-art generative models, which may produce visually plausible but semantically ambiguous features ("hallucinations") that confound classifiers. This work provides insights into the dependencies between image reconstruction quality and classification performance, offering a reproducible baseline for future research in non-destructive testing and material science. Given that cross-well accuracy remains in the 49–53\% range, we position the resulting system as a decision-support and screening tool for lithofacies interpretation rather than as a fully autonomous classifier. The code is available at https://github.com/GalymzhanAbdimanap/Lithology_recognition

18.
arXiv (CS.CL) 2026-06-16

Building Customer Support AI Agents at 100M-User Scale: An Evaluation-Driven Framework

The rapid rise in LLM capabilities has made AI agents increasingly viable across a broad range of tasks. Among the most promising applications is building production-ready customer-facing agents, a challenge that demands coordinated excellence in evaluation methodology, context engineering, training, and online measurement. Yet these critical pillars are typically developed in isolation, creating blind spots that only surface after deployment. In this paper, we present a unified framework that bridges offline development with online impact for customer support AI agents at Nubank, a company with 100M+ users. Our approach integrates several key components: (1) structured context engineering tailored to customer support agents, (2) systematic human-in-the-loop prompt iteration, (3) rigorous LLM judge evaluation with measured inter-rater agreement and GEPA optimization for consistency, and (4) ideation-to-production validation. A central insight is that evaluation-pipeline quality directly determines iteration velocity. We present results from five production deployments spanning distinct domains: card delivery, debt management, credit-limit support, card management, and product explanation. These deployments deliver consistent customer-satisfaction gains while substantially accelerating iteration. In our card-delivery deployment, large-scale A/B testing yields a 37 percentage-point improvement in AI transactional Net Promoter Score and a 29 percentage-point gain in self-service rate over prior agent variants, alongside a strong correlation between offline simulation metrics and online outcomes, demonstrating that eval-driven development reliably predicts production impact. On most use cases, AI satisfaction reaches within a few percentage points of expert human agents.

19.
arXiv (CS.AI) 2026-06-17

Rethinking Multimodal Fusion for Time Series: Text Modalities Need Constrained Fusion

arXiv:2603.22372v2 Announce Type: replace-cross Abstract: Recent advances in multimodal learning have motivated the integration of auxiliary modalities such as text or vision into time series (TS) forecasting. However, most existing methods provide limited gains, often improving performance only in specific datasets or relying on architecture-specific designs that limit generalization. In this paper, we show that multimodal models with naive fusion strategies (e.g., simple addition or concatenation) often underperform unimodal TS models, which we attribute to the uncontrolled integration of auxiliary modalities which may introduce irrelevant information. Motivated by this observation, we explore various constrained fusion methods designed to control such integration and find that they consistently outperform naive fusion methods. Furthermore, we propose Controlled Fusion Adapter (CFA), a simple plug-in method that enables controlled cross-modal interactions without modifying the TS backbone, integrating only relevant textual information aligned with TS dynamics. CFA employs low rank adapters to filter irrelevant textual information before fusing it into temporal representations. We conduct over 20K experiments across various datasets and TS/text models, demonstrating the effectiveness of the constrained fusion methods. Code is available at: https://github.com/seunghan96/cfa.

20.
arXiv (CS.AI) 2026-06-17

SketchXplain: Intuitive Visual Explanations of Image Classifiers with Sketches

arXiv:2606.17646v1 Announce Type: cross Abstract: Saliency map visualizations explain image-based AI predictions by pointing to regions, but these are often unintuitive and semantically unclear, leaving an interpretability gap. We argue that AI explanations should be intuitive – coherent to user knowledge, yet simple and selective to accelerate interpretation. Inspired by artistic drawings, we propose SketchXplain to generate sketch-based visual explanations for intuitive image-based explainable AI (XAI). Combining techniques in saliency maps, concept-bottleneck models, and sketch optimization, SketchXplain integrates saliency to select coherent observation artifacts, concepts for knowledge coherence, cues to represent them, and abstraction for simplicity. Evaluating on face expression recognition, modeling and user studies showed that SketchXplain supported quicker interpretation with more aligned visualizations than saliency maps or simple drawings. Further evaluation on skin lesion diagnosis found that SketchXplain more coherently visualized disease symptoms, better supporting lay diagnosis. Thus, this work illustrates the value of sketches for intuitive, simple, coherent, and quick image-based XAI visualizations.

21.
arXiv (CS.CV) 2026-06-17

ActWorld: From Explorable to Interactive World Model via Action-Aware Memory

Interactive world models aim to simulate environment dynamics under real-time user actions. However, their action vocabulary is largely confined to navigation: most actions correspond to motion (e.g., walk, turn, look around), while interaction with objects in the scene (e.g., pick up plates, open doors, or trigger physical responses) is either absent, restricted to game domains, or relegated to prompt-to-full-video scenarios. The resulting worlds are visually explorable but not truly actionable. In this work, we present ActWorld, an interactive world model that extends prior navigation-centric generators to support mid-rollout object interaction within a chunk-autoregressive framework. We argue that the navigation-interaction gap stems from two bottlenecks. First, a data bottleneck: the lack of human-object interaction data with accurate, dense labels. Second, a memory bottleneck: recency-biased history compression in existing world models discards the event-transition frames that causally determine subsequent object states, leading to an action-forgetting pathology. On the data side, we construct a 100K interaction video dataset, each annotated with per-chunk captions via chain-of-thought reasoning. On the model side, we introduce a hierarchical action-aware memory design that routes history compression by interaction importance, complemented by a persistent memory bank that maintains event-update and object-identity tokens across long rollouts. Experiments show that ActWorld supports both flexible navigation and rich object interaction within a single model, substantially improving interaction fidelity over navigation-only baselines without sacrificing viewpoint control. Project page is available at https://interactwm.github.io/ActWorld.

22.
arXiv (CS.AI) 2026-06-18

ASTRA: A Scalable Next-Generation ATCO Training Simulator with Autonomous Simpilots

arXiv:2606.18319v1 Announce Type: cross Abstract: Air Traffic Control Operators (ATCOs) are vital in ensuring the safe, orderly, and efficient flow of air traffic, yet training capacity is constrained by reliance on specialized human trainers known as simpilots, who must role-play both pilots and ATCOs in a simulated airspace. Existing automated solutions rely on Western-centric speech models that perform poorly in Singaporean operational contexts, with off-the-shelf systems exhibiting Word Error Rates (WER) of up to 107.80% on Singaporean-accented aviation speech. We introduce ASTRA, an end-to-end training simulator that automates these simpilot roles through a pipeline that transcribes ATCO speech, interprets instructions, and generates appropriate pilot and ATCO responses using locally adapted voice models. Our fine-tuned Automatic Speech Recognition (ASR) pipeline reduces WER to 23.45%, substantially outperforming existing approaches in this domain. Beyond traffic simulation, ASTRA incorporates an AI-assisted performance evaluation framework that assesses trainee radiotelephony communications across accuracy, brevity, and completeness, achieving post-optimization scores of 91.7%, 88.2%, and 86.9%, respectively. Built on open-source foundations such as DSPy and Unsloth, this approach enables scalable, standardized ATCO assessment while reducing instructor workload.

23.
arXiv (quant-ph) 2026-06-11

Multipartite reference-frame-independent quantum cryptographic communication

arXiv:2606.12284v1 Announce Type: new Abstract: Reference frame mismatch among communication parties introduces errors in quantum cryptographic protocols. As the number of participants increases, aligning reference frames becomes increasingly difficult, complicating multipartite quantum cryptographic implementations. Here, we theoretically and experimentally investigate multipartite reference-frame-independent (RFI) quantum cryptographic communication using Greenberger-Horne-Zeilinger (GHZ) states. We generalize the bipartite RFI security parameter $C$ to an $N$-party parameter $C_N$ and derive the asymptotic secret key rate expressed solely in terms of experimentally accessible quantities. We analyze the key rate under global and local depolarizing noise models and find that increasing the number of parties $N$ enhances robustness against global depolarizing noise while increasing vulnerability to local channel noise. We also present a proof-of-principle experimental demonstration of four-party RFI quantum cryptographic communication using four-photon GHZ states, confirming the reference-frame invariance of both the $C_4$ parameter and the secret key rate under various reference frame rotations.

24.
arXiv (CS.LG) 2026-06-19

Pseudo-Formalization for Automatic Proof Verification

arXiv:2605.20531v2 Announce Type: replace-cross Abstract: Reliable verification of proofs remains a bottleneck for training and evaluating AI systems on hard mathematical reasoning. Fully formal proofs, in languages like Lean, are easy to verify because they are unambiguous and modular. Most proofs, particularly those written by AI systems, have neither property, and translating them into formal languages remains challenging in many frontier math settings. We propose Pseudo-Formalization (PF), a proof format that captures the modularity and precision of formal proofs while retaining the flexibility of natural language. A Pseudo-Formal proof is decomposed into self-contained modules, each stating its premises, conclusion, and proof in natural language. To verify the correctness of a regular natural language proof, an LLM translates it to Pseudo-Formal and then verifies each module independently, an algorithm we call Block Verification (BV). We evaluate PF+BV on two benchmarks spanning olympiad and research-level mathematics, where it pareto-dominates LLM-as-judge baselines on error-finding precision and recall. To support future work, we release our research-level proof verification benchmark ArxivMathGradingBench.

25.
arXiv (CS.CL) 2026-06-16

Weaving Multi-Source Evidence for Biomedical Reasoning: The BioMedHop Benchmark and BioWeave Framework

Biomedical question answering (QA) increasingly requires reasoning over interacting entities, where supporting evidence is scattered across biomedical knowledge graphs, literature documents, and web-accessible resources. However, existing biomedical QA benchmarks mainly focus on exam-style knowledge, literature comprehension, or short-range multi-hop inference, leaving source-conditioned graph reasoning and evidence topology construction underexplored. To fill this gap, we introduce BioMedHop, a multi-source graph-grounded benchmark for evaluating biomedical reasoning over structured evidence topologies. BioMedHop contains 10,045 instances across KG, document, web, and hybrid evidence settings, covering shared-neighbor matching, intersection reasoning, path-based reasoning, and counting, with option-based, open-ended, and numeric count renderings. To support this benchmark, we further propose BioWeave, a source-aware reasoning framework that retrieves biomedical KG paths, gathers supporting clues from documents and web sources, assembles them into a unified evidence graph, and verifies answers through entity-level evidence support. Comprehensive experiments show that BioWeave achieves the best overall performance among compared methods on BioMedHop, outperforming the strong hybrid baseline ToG-2 by 10.5% in the overall average. Moreover, BioWeave consistently improves different LLM backbones and enables smaller models, such as Qwen3-4B, to achieve reasoning performance comparable to GPT-4-Turbo.