×

Academic Intelligence · Curated Daily

Explore the Frontier of Global Academia

AcademicHub aggregates real-time literature from top journals and preprint platforms. Build your personal research radar and let large language models compile cross-disciplinary analysis briefings automatically.

Authors: Li Zhang ×
Shuffle
01.
arXiv (CS.CV) 2026-06-17

HLS-GPT: A Generative Pretrained Transformer (GPT) for Continental-Scale NASA Harmonized Landsat and Sentinel-2 (HLS) Reflectance Reconstruction Across All Bands on Arbitrary Dates

Recent deep learning methods for Landsat and Sentinel-2 reflectance time series reconstruction remain limited by restricted spectral coverage, limited geographic scalability, or patch-based designs with short temporal contexts. We present HLS-GPT, a large-scale generative pretrained Transformer model for reconstructing NASA Harmonized Landsat Sentinel-2 30 m surface reflectance for all bands, any date, and any pixel location. HLS-GPT uses a hierarchical Transformer architecture to handle the different spectral band configurations of Landsat and Sentinel-2 and operates on single-pixel 12-month time series. To capture geographic and seasonal variability, the model was trained with nine years of HLS time series from more than 0.25 million training pixels across the conterminous United States. A random cropping and masking strategy extracts 12-month periods with varying start dates across epochs, masks 50% of valid observations, and trains the model to reconstruct the masked reflectance values from the remaining observations. Evaluation using more than 62,000 independent test pixels shows robust reconstruction under diverse land surface conditions, including complex crop phenology and sparse, irregular observations. Leave-one-observation-out evaluation achieved reconstruction RMSE below 0.026 for all HLS spectral bands, with relative RMSE below 35% for visible bands and below 13% for other bands. Red-edge band errors were comparable to red and near-infrared errors despite the absence of red-edge bands on Landsat. Sensitivity analyses that randomly masked 10% to 90% of test observations showed only modest degradation when 10% to 50% of observations were masked, with all-band RMSE below 0.028. Image reconstruction over nine independent 109 by 109 km CONUS HLS tiles further demonstrates that HLS-GPT outperforms two conventional methods and the NASA-IBM Prithvi model.

02.
Nature (Science) 2026-06-17

Rock weathering can counteract river CO<sub>2</sub> emissions induced by permafrost thaw

Authors:

Climate-induced permafrost thaw unlocks large stores of organic carbon that are mineralized and emitted as carbon dioxide (CO2) from rivers to the atmosphere1. Concurrently, warming and permafrost thaw can increase mineral weathering rates, thus affecting the release and sequestration of inorganic carbon2–4. Yet how these biological and geological carbon cycles interact and jointly affect CO2 dynamics (emission compared with drawdown) in permafrost rivers remains unknown5. Here we combine CO2 emissions, organic and inorganic solute concentrations, dual carbon isotopes (δ13C–Δ14C) and geochemical modelling to infer how permafrost thaw may affect river biogeochemistry over decades to centuries across the Qinghai–Tibet Plateau. Leveraging a gradient of thermal permafrost degradation, we find that river CO2 emissions decline, whereas solute fluxes from rock weathering increase with decreasing permafrost cover. Across this region, net CO2 drawdown fluxes from rock weathering are about 35% of river CO2 emissions, varying from around 15% in catchments with continuous permafrost to more than 100% in catchments with discontinuous or isolated permafrost. Thus, carbon fluxes from chemical weathering may become increasingly important with ongoing permafrost thaw, potentially even outpacing river CO2 emissions. Our findings disentangle the interplay between biological and geological carbon fluxes that are important for the cryosphere and the global carbon cycle. Permafrost thaw on the Qinghai–Tibet Plateau increases rock-weathering rates while reducing river CO2 emissions, suggesting geological carbon fluxes may eventually outpace thaw-driven emissions.

03.
arXiv (CS.CV) 2026-06-15

VideoWeave: Unlocking Geometric Consistency in Video Generation via Joint Geometry-Video Modeling

Large-scale video diffusion models often fail to preserve 3D structure over time, causing geometric drift and implausible motion under viewpoint changes. Existing methods usually enforce geometric consistency by using explicit geometry reconstructions, such as depth maps, point clouds, or reconstructed 3D structures, to define conditions, supervision, or reward signals, making the generator sensitive to errors from upstream geometry pipelines. We propose VideoWeave, a latent-space post-training framework that uses implicit geometry-model features to constrain the generative distribution, providing a more flexible and non-rigid form of guidance that mitigates the impact of reconstruction errors from geometry models. Specifically, VideoWeave adapts these features into geometry latents and jointly models them with video latents in a shared denoising space, allowing geometry to shape the generative distribution during training. To support this process, we build GeoVid-80K, an 80K-video dataset with paired appearance and geometry representations. Experiments on text-to-video and image-to-video generation show that VideoWeave improves geometric coherence while preserving strong visual quality. VideoWeave project page at https://videoweave.github.io/

04.
arXiv (CS.LG) 2026-06-18

On the Residual Scaling of Looped Transformers: Stability and Transferability

arXiv:2606.18524v1 Announce Type: new Abstract: Looped (weight-tied) Transformers apply a shared residual block $N$ times ($h \leftarrow h + \varepsilon\,f(h)$, same $f$ at each step), increasing effective depth without adding parameters. Prior depth-scaling analyses prescribe $\varepsilon = 1/\!\sqrt{L}$ for depth-$L$ residual networks. We show that this is insufficient for looped architectures: weight sharing makes residual updates correlated across iterations, requiring the stronger scaling $\varepsilon = 1/N$. For multi-layer blocks ($L$ unique layers looped $N$ times), we derive a factored parameterization $\varepsilon = \lambda/(N\!\sqrt{L})$ that separates the two sources of growth: $1/N$ controls the within-layer loop correlation, and $1/\!\sqrt{L}$ controls the across-layer variance. A key consequence is that the optimal learning rate depends only on the number of unique layers $L$, not on the loop count $N$, enabling direct hyperparameter transfer from small to large $N$ without retuning. Experiments on looped Transformers confirm that $1/N$ scaling improves trainability and yields better loss than $1/\!\sqrt{N}$ scaling across loop counts.

05.
arXiv (CS.CV) 2026-06-19

S-Agent: Spatial Tool-Use Elicits Reasoning for Spatial Intelligence

Real-world spatial intelligence requires reasoning over a continuous and evolving 3D world, yet existing VLMs and tool-augmented agents largely remain tied to static, stateless inference from isolated visual observations. We introduce \textsc{S-Agent}, a spatial tool-use agentic paradigm for understanding and reasoning over continuous multi-view images and videos. By formulating spatial reasoning as spatio-temporal evidence accumulation rather than isolated frame-level prediction, \textsc{S-Agent} reshapes spatial perception into scene-centric understanding beyond frame-centric recognition. Specifically, \textsc{S-Agent} casts the VLM as a semantic planner that decides what evidence is needed, while a hierarchy of spatial tools and experts grounds objects in 2D, lifts them into 3D geometric evidence, and aggregates this evidence into high-level spatial knowledge (e.g., counting, measurement, orientation, and relative position). Additionally, a temporal memory mechanism, including Scene Memory for maintaining the evolving scene state and Agent Memory for accumulating reasoning context, enables evidence integration across frames and reasoning steps. Comprehensive experiments on multi-view and video spatial reasoning benchmarks show that \textsc{S-Agent} consistently improves both open-source and closed-source VLMs in a training-free manner. Beyond inference-time augmentation, supervised fine-tuning (SFT) on \textsc{S-Agent}-generated spatial trajectories \textsc{S-300K} yields \textsc{S-Agent-8B}, a compact spatial agent that significantly surpasses similar-scale baselines (e.g., Qwen3-VL-8B) and performs comparably to advanced closed-source models (e.g., GPT-5.4 and Gemini 3).

06.
arXiv (CS.CL) 2026-06-16

CentroidKV: Efficient Long-Context LLM Inference via KV Cache Clustering

Large language models (LLMs) with extended context windows have become increasingly prevalent for tackling complex tasks. However, the substantial Key-Value (KV) cache required for long-context LLMs poses significant deployment challenges. Existing approaches either discard potentially critical information needed for future generations or offer limited efficiency gains due to high computational overhead. In this paper, we introduce CentroidKV, a simple yet effective framework for online KV cache clustering. Our approach is based on the observation that key states exhibit high similarity along the sequence dimension. To enable efficient clustering, we divide the sequence into chunks and propose Chunked Soft Matching, which employs an alternating partition strategy within each chunk and identifies clusters based on similarity. CentroidKV then merges the KV cache within each cluster into a single centroid. Additionally, we provide a theoretical analysis of the computational complexity and the optimality of the intra-chunk partitioning strategy. Extensive experiments across various models and long-context benchmarks demonstrate that CentroidKV achieves up to 75% reduction in KV cache memory usage while maintaining comparable model performance. Moreover, with minimal computational overhead, CentroidKV accelerates the decoding stage of inference by up to $1.92\times$ and increases the serving throughput by up to $4\times$.

07.
arXiv (CS.CL) 2026-06-15

Retrospective Progress-Aware Self-Refinement for LLM Agent Training

LLM-based agents trained with reinforcement learning optimize step-wise action prediction but lack metacognitive awareness of task progress, inducing a gap that hinders long-horizon scaling. A pilot study reveals that online progress prompting hurts performance while retrospective demonstrations help, yet this capability cannot emerge from outcome-reward training alone. We present RePro, Retrospective Progress-Aware Training, a framework that trains agents to self-generate progress signals via a forward-then-reflect rollout paradigm: the agent executes actions online, then retrospectively reassesses its step-wise progress given the completed trajectory and known outcome. RePro initializes with a Retrospection Warmup that teaches reflection format from minimal external demonstrations, then further trains through RePro-PO with a composite reward that produces self-generated signals without continuous external supervision. Experiments on WebShop, ALFWorld, and Sokoban show that RePro enhances the Qwen family's performance, with up to $12\%$ absolute success rate gains.

08.
arXiv (quant-ph) 2026-06-19

Propagating Collective Spin-valley Modes in Twisted WSe2

arXiv:2507.18770v2 Announce Type: replace-cross Abstract: The emergence of neutral collective modes is a hallmark of correlated quantum phases but is often challenging to probe experimentally. In two-dimensional flatband systems, charge responses have been intensively investigated yet neutral excitations remain largely unexplored. In particular, intervalley coherent state (IVC) features a neutral Goldstone mode due to spontaneously broken valley U(1) symmetry. While IVC state has been proposed as a unifying theme across graphene and semiconductor based systems, its defining feature, the neutral Goldstone mode, remains elusive in experiment. Here we investigate space and time resolved transport of neutral modes in twisted WSe2 moire superlattices through a novel ultrafast imaging technique. We uncover two new propagating collective modes with very different velocities, which emerge near the van Hove singularity (VHS) in both intermediate (3.5 to 4 degree) and large (around 5 degree) angle twisted WSe2. The fast-propagating mode has a large speed of about 3 km/s and is consistent with a Goldstone mode for an IVC state, while the slow-moving mode is likely a gapped amplitude mode. They can be understood as the spin-valley analogues of collective modes of a superfluid, whose propagation is imaged for the first time in a condensed matter system. Our study demonstrates a powerful new approach for probing charge-neutral modes in quantum materials and offers key insights into the interplay between charge and spin-valley physics in moire superlattices.

09.
arXiv (CS.AI) 2026-06-19

Hybrid Diffusion Transformer for Instruction-Guided Audio Editing via Rectified Flow

arXiv:2606.20101v1 Announce Type: cross Abstract: Audio editing aims to modify specific content in an existing audio clip according to a natural language instruction while preserving the remaining acoustic content. Despite the remarkable progress of diffusion models, existing training-based editing methods mainly rely on the local inductive biases and cross-attention interaction in convolutional U-Net backbones, which often hinder long-range semantic alignment and precise understanding and localization of instructions. In contrast, diffusion transformers provide stronger global modeling and multimodal fusion, but existing editing architectures usually adopt a simple stack of MMDiT and DiT blocks. Applying joint attention over concatenated audio and text tokens in all blocks results in quadratic complexity with respect to token length. To balance editing performance and efficiency, we propose a hybrid two-stage diffusion transformer architecture for instruction-guided audio editing based on rectified flow matching. It performs joint attention over audio and text tokens to establish coarse semantic alignment at low-resolution stage, then switches to alternating joint-attention and cross-attention blocks to refine editing details at high-resolution stage. This coarse-to-fine strategy enables efficient and accurate instruction-guided audio editing. Experiments show that the proposed framework achieves notable performance gains on challenging editing tasks involving overlapping audio events and complex instructions, while substantially improving editing efficiency with a compact model.

10.
arXiv (CS.CV) 2026-06-16

Towards Next-Generation Healthcare: A Survey of Medical Embodied AI for Perception, Decision-Making, and Action

Foundation models have demonstrated impressive performance in enhancing healthcare efficiency across a wide range of medical applications. Nevertheless, their limited ability to perceive, understand, and interact with the physical world significantly constrains their effectiveness in real-world clinical workflows, where safety-critical decision-making and physical execution are tightly coupled. Recently, embodied artificial intelligence (AI) has emerged as a promising physical-interactive paradigm for intelligent healthcare, enabling agents to operate in complex medical environments. As research in this area rapidly expands, understanding how intelligent agents function as integrated, end-to-end systems in clinical environments becomes increasingly critical. However, existing surveys on medical embodied AI largely emphasize individual aspects or functional components, lacking a unified system-level organization of the field. To support and consolidate recent advances, we systematically survey the core components of medical embodied AI, with a particular emphasis on the coordinated integration of perception, decision-making, and action. We further review representative medical applications and relevant datasets, and we analyze the major challenges encountered in real-world clinical practice. Finally, we discuss key directions for future research in this rapidly evolving field. The associated project can be found at https://github.com/VMVLab/Medical_Embodied_AI_Paper_List.

11.
arXiv (CS.CL) 2026-06-15

Deep Dense Exploration for LLM Reinforcement Learning via Pivot-Driven Resampling

Effective exploration is a key challenge in reinforcement learning for large language models: discovering high-quality trajectories within a limited sampling budget from the vast natural language sequence space. Existing methods face notable limitations: GRPO samples exclusively from the root, saturating high-probability trajectories while leaving deep, error-prone states under-explored. Tree-based methods blindly disperse budgets across trivial or unrecoverable states, causing sampling dilution that fails to uncover rare correct suffixes and destabilizes local baselines. To address this, we propose Deep Dense Exploration (DDE), a strategy that focuses exploration on $pivots$-deep, recoverable states within unsuccessful trajectories. We instantiate DDE with DEEP-GRPO, which introduces three key innovations: (1) a lightweight data-driven utility function that automatically balances recoverability and depth bias to identify pivot states; (2) local dense resampling at each pivot to increase the probability of discovering correct subsequent trajectories; and (3) a dual-stream optimization objective that decouples global policy learning from local corrective updates. Experiments on mathematical reasoning benchmarks demonstrate that our method consistently outperforms GRPO, tree-based methods, and other strong baselines. Code is available at https://github.com/AgentCombo/DEEP-GRPO

12.
arXiv (CS.LG) 2026-06-16

Beyond Accuracy: Measuring Bias Acknowledgment in Chain-of-Thought Reasoning for Responsible AI Evaluation

arXiv:2606.15127v1 Announce Type: new Abstract: Reasoning models are increasingly used in settings where the final answer is not the only object of review: educational tools may show students intermediate steps, decision-support systems may require human oversight, and audit workflows may inspect traces for misleading or biased input. In such settings, two responses can receive the same final-answer score while differing in whether the trace explicitly flags injected biasing content. Accuracy-only evaluation collapses these cases. We study this gap as a measurement blind spot for responsible evaluation and introduce a minimal trace-level diagnostic with two axes: susceptibility (whether the bias breaks a previously correct answer) and acknowledgment (whether the trace contains a rubric-defined surface reference to the injected content). Across thousands of biased GSM8K trials, GPT-4o and Claude Sonnet~4 have similar susceptibility rates ($1.3\%$ vs.\ $1.2\%$) but substantially different acknowledgment rates ($13.0\%$ vs.\ $75.0\%$) under the same rubric.

13.
arXiv (quant-ph) 2026-06-17

SPICE-Q and Large-Scale Quantum Chip Production

arXiv:2606.17907v1 Announce Type: new Abstract: We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.

14.
arXiv (math.PR) 2026-06-17

On Injectivity of Phase Retrieval

Authors:

arXiv:2606.17922v1 Announce Type: cross Abstract: In this short note, we prove that if $A \in \mathbb C^{N \times M}$ with $N=4M-5$ has i.i.d.\ standard complex Gaussian entries, then the probability that the phase retrieval map generated by $A$ is not injective is positive. This proves Part (1) of a conjecture of Cynthia Vinzant, which was later restated by Afonso S. Bandeira in [BDL+26]. The main result of this paper was obtained using generative AI, in particular the Rethlas system.

15.
arXiv (CS.AI) 2026-06-16

Medical world models: representing medical states, modelling clinical dynamics and guiding intervention policies

arXiv:2606.16721v1 Announce Type: new Abstract: Medical diagnosis and treatment are dynamic processes in which patient states evolve over time and clinical interventions alter future outcomes. Although current medical AI can detect disease, estimate risk and generate reports, many systems still return static labels or scores, offering limited insight into how illness may progress or how alternative interventions may reshape its trajectory. Medical world models adapt the world-model idea from artificial intelligence to healthcare by learning internal simulators of patient-state dynamics. Their long-term goal is to help clinicians anticipate deterioration, compare treatment-conditioned futures and tailor care to individual patients. Yet relevant work remains scattered across foundation models, longitudinal modelling, disease simulation, treatment-effect estimation, reinforcement learning and digital twins. To bridge this gap, this review outlines a roadmap for advancing medical AI from isolated diagnosis and prediction toward medical world models that simulate disease evolution and support intervention decisions. This roadmap is organized around three coupled capabilities: patient-state construction, clinical dynamics modelling and intervention decision support. Across representative systems, the comparison highlights what each capability contributes and how partial components can be integrated into more mature perception–dynamics–planning systems. Finally, we identify the challenges involved in turning plausible rollouts into clinically useful simulators. Related literature is available at https://github.com/1999kevin/awesome_medical_world_models.

16.
arXiv (CS.CL) 2026-06-19

NIM4-ASR: Towards Efficient, Robust, and Customizable Real-Time LLM-Based ASR

Integrating large language models (LLMs) into automatic speech recognition (ASR) has become a mainstream paradigm in recent years. Although existing LLM-based ASR models demonstrate impressive performance on public benchmarks, their training remains predominantly data-driven, leaving key practical challenges insufficiently addressed – particularly limited downward scalability in resource-constrained deployments and hallucinations under acoustically challenging conditions. To address these issues, we present NIM4-ASR, a production-oriented LLM-based ASR framework optimized for both efficiency and robustness. Grounded in a principled delineation of functional roles between the encoder and the LLM, we redesign the multi-stage training paradigm to align each module with its intended capability boundary. Specifically, we reformulate the pre-training architecture and objective to mitigate the modality gap and improve parameter efficiency; introduce an iterative asynchronous SFT stage to preserve acoustic fidelity and constrain representation drift; and design an ASR-specialized reinforcement learning stage to further enhance recognition quality and robustness. We additionally incorporate a suite of production-oriented optimizations, including robustness under noisy and silent conditions, real-time streaming inference, and hotword customization via retrieval-augmented generation (RAG). Experiments show that NIM4-ASR achieves state-of-the-art performance on multiple public benchmarks with merely 2.3B parameters, while substantially outperforming larger-scale competitors on internal benchmarks – particularly in entity-intensive real-world scenarios. NIM4-ASR further supports million-scale hotword customization via RAG with sub-millisecond retrieval latency, enabling efficient adaptation to emerging entities and personalized user requirements.

17.
arXiv (CS.CV) 2026-06-18

Multi-Modal Hyper-Graph Fusion for Low-Light Crowd Counting

Crowd counting is a fundamental task in computer vision. However, crowd counting in low-light environments remains largely underexplored, despite its practical importance in the real world. Existing methods mainly focus on well-lit scenes or rely on single-modality Red-Green-Blue (RGB) representations, which often become unreliable under extreme darkness and complex non-uniform illumination. To handle this problem, we construct three new low-light crowd counting benchmarks, which consist of two synthetic datasets, SHA\_Dark and SHB\_Dark, and a real-world benchmark LC-Crowd (Low-light Crowd Dataset). Inspired by Retinex-based physical modeling, we introduce depth and Canny edge cues as complementary geometric and structural priors to enhance the intrinsic reflectance representation under low-light conditions. We propose a Multi-Modal Hyper-Graph Fusion module, which formulates RGB appearance, depth geometry, and edge structure cues as nodes in a unified hyper-graph and explicitly captures their high-order complementary relationships via dynamic hyperedge construction and message passing. Furthermore, to adaptively allocate computation in dense prediction, we propose a Deformable Rectangular Sparse Attention (DRSA) module, which concentrates computation on informative regions through anchor-aware estimation and adaptive rectangular window modeling. Based on these designs, we develop a unified Low-Light Counting Network (LCNet) for robust low-light crowd counting. Extensive experiments on three benchmarks demonstrate that the proposed method achieves the best overall performance against existing state-of-the-art (SOTA) methods. The code is in the supplementary material. The datasets will be made public upon acceptance.

18.
arXiv (CS.CV) 2026-06-12

Edit the Bits, Diff the Codes: Bitwise Residual Editing for Visual Autoregressive Models

Text-guided image editing with visual autoregressive (VAR) generators requires controlling both what the model samples and where the sampled change is written back into the image code. Existing VAR editors mainly operate on token streams, features, or flat next-token logits, leaving two native structures of bitwise-residual VAR models underused: the per-bit Bernoulli prediction head and the additive multi-scale residual code field from which the image is assembled. We propose BitResEdit, a training-free editor for bitwise-residual VAR generators such as Infinity. BitEdit performs source-negative guidance by tilting the post-CFG per-bit log-odds along a source–target contrast computed on a shared edited prefix, then projects each update into a closed-form Bernoulli-KL trust region around the clean CFG sampler. ResEdit converts the sampled bits into per-scale continuous-code residuals, gates them with a localization mask, and re-injects them through the generator's native sum-of-scales. Together they couple decision-time bit guidance with combination-time code composition, so masked-out latent features are preserved exactly by code arithmetic while localized, scale-aware edits are applied inside the target region. On PIE-Bench with Infinity-2B, BitResEdit attains the strongest text alignment among same-backbone VAR editors, improving CLIP on the edited region by +1.07 over the strongest prior editor while keeping background preservation competitive with it. Ablations show BitEdit and ResEdit play complementary roles in target alignment and background preservation.

19.
arXiv (CS.CV) 2026-06-11

Physics-Driven Spatiotemporal Modeling for AI-Generated Video Detection

AI-generated videos have achieved near-perfect visual realism (e.g., Sora), urgently necessitating reliable detection mechanisms. However, detecting such videos faces significant challenges in modeling high-dimensional spatiotemporal dynamics and identifying subtle anomalies that violate physical laws. In this paper, we propose the first physics-driven AI-generated video detection paradigm based on probability flow conservation principles. Specifically, we propose a statistic called Normalized Spatiotemporal Gradient (NSG), which quantifies the ratio of spatial probability gradients to temporal density changes, explicitly capturing deviations from natural video dynamics. Leveraging pre-trained diffusion models, we develop an NSG estimator through spatial gradients approximation and motion-aware temporal modeling without complex motion decomposition while preserving physical constraints. Building on this, we propose an NSG-based video detection method (NSG-VD) that computes the Maximum Mean Discrepancy (MMD) between NSG features of the test and real videos as a detection metric. Last, we derive an upper bound of NSG feature distances between real and generated videos, proving that generated videos exhibit amplified discrepancies due to distributional shifts. Extensive experiments confirm that NSG-VD outperforms state-of-the-art baselines by 16.00% in Recall and 10.75% in F1-Score, validating the superior performance of NSG-VD. The source code is available at https://github.com/ZSHsh98/NSG-VD.

20.
arXiv (CS.CV) 2026-06-17

Phys4D: Fine-Grained Physics-Consistent 4D Modeling from Video Diffusion

Recent video diffusion models have achieved impressive capabilities as large-scale generative world models. However, these models often struggle with fine-grained physical consistency, exhibiting physically implausible dynamics over time. In this work, we present Phys4D, a pipeline for learning physics-consistent 4D world representations from video diffusion models. Phys4D adopts a three-stage training paradigm that progressively lifts appearance-driven video diffusion models into physics-consistent 4D world representations. We first bootstrap robust geometry and motion representations through large-scale pseudo-supervised pretraining, establishing a foundation for 4D scene modeling. We then perform physics-grounded supervised fine-tuning using simulation-generated data, enforcing temporally consistent 4D dynamics. Finally, we apply simulation-grounded reinforcement learning to correct residual physical violations that are difficult to capture through explicit supervision. To evaluate fine-grained physical consistency beyond appearance-based metrics, we introduce a set of 4D world consistency evaluation that probe geometric coherence, motion stability, and long-horizon physical plausibility. Experimental results demonstrate that Phys4D substantially improves fine-grained spatiotemporal and physical consistency compared to appearance-driven baselines, while maintaining strong generative performance. Our project page is available at https://sensational-brioche-7657e7.netlify.app/

21.
arXiv (CS.CL) 2026-06-11

Adaptive Multi-Resolution Procedural Knowledge Compression for Large Language Models

Large language models (LLMs) are widely used to tackle complex tasks with autonomous workflows. Recently, reusable natural language skills have emerged as a popular paradigm to inject procedural knowledge into LLM applications. Since popular skills are often invoked repeatedly, placing their full text in every context significantly increases prefill cost and latency. While text compression techniques have the potential to solve this problem, most existing methods are designed to compress factual knowledge in documents instead of procedural knowledge, making them insufficient for skill compression. In this paper, we argue that an effective skill compression method should: 1) preserve logical dependencies among workflows and tool protocols, 2) enable lightweight, offline compression for frequently updated community skills, and 3) be adaptable to varying complexities across skills. To address this, we present SKIM (SKIll coMpression), an adaptive multi-resolution soft token compression framework for procedural skills. Depending on the complexity of each skill, SKIM creates different numbers of soft tokens that not only improve the efficiency of LLM inference, but also preserve the effectiveness of skill usage. Experiments indicate that SKIM compresses skills to 30 to 60 percent of their original token length while preserving task performance better than existing compression methods.We have released our code at https://github.com/bebr2/SKIM .

22.
arXiv (CS.CV) 2026-06-12

MaskWAM: Unifying Mask Prompting and Prediction for World-Action Models

World Action Models (WAMs) present a promising paradigm for robotic control via video prediction. However, current WAMs suffer from fundamental spatial bottlenecks: standard text inputs introduce referential ambiguity in cluttered scenes, while unstructured RGB predictions lack semantic grounding and remain biased by task-irrelevant backgrounds. To overcome these limitations, we introduce MaskWAM, an object-centric world-action model. By jointly integrating masks as both explicit inputs and predictions via a unified Mixture of Transformers (MoT), MaskWAM unlocks robust policy generalization. This design provides two key benefits: (1) predicting future masks yields object-centric semantic supervision that suppresses visual noise, significantly enhancing even standard text-conditioned WAMs; and (2) coupling this predictive supervision with first-frame visual prompts, such as target object masks, establishes a precise spatial anchor that substantially reduces language ambiguity. Crucially, as WAMs are inherently vision-driven architectures, direct mask conditioning yields substantially stronger guidance than text alone, establishing a precise and robust paradigm for manipulating unseen objects. Evaluations on LIBERO, RoboTwin, and real-world tasks demonstrate that MaskWAM significantly outperforms baselines in both language-clear and language-ambiguous tasks.

23.
arXiv (CS.CL) 2026-06-16

The Art of Mixology: Mixup-based Obfuscation for Privacy-Preserving Split Learning in Large Language Models

Split learning provides a practical paradigm for resource-constrained users to train Large Language Models (LLMs) by offloading computation-intensive layers to a server while keeping raw data local. However, existing privacy-preserving split learning methods still face a difficult trade-off among utility, privacy, efficiency, and stability. Specifically, these methods often suffer from substantial utility degradation, remain vulnerable to advanced data reconstruction attacks, incur prohibitive computational and communication overhead, or exhibit unstable performance across different tasks. In this paper, we propose MIXGUARD, a novel mixup-based privacy-preserving split learning framework for LLMs. MIXGUARD introduces token-level obfuscation, representation-level obfuscation, and adaptive gradient perturbation mechanisms, which operate jointly to preserve useful learning signals while preventing privacy leakage to the server. Technically, MIXGUARD first constructs a lightweight calibration model on a public dataset to refine the approximated target representation, and then applies this model during privacy-preserving fine-tuning on private data. We conduct extensive experiments on four classification tasks and four text generation tasks across multiple LLM families, model sizes, architectures, and fine-tuning strategies. The results show that MIXGUARD preserves model utility comparable to non-split training baselines, consistently achieves stronger privacy protection than existing split learning defense methods against state-of-the-art data reconstruction attacks, and remains robust under adaptive attack settings.

24.
arXiv (CS.CL) 2026-06-11

External Experience Serving in Production LLM Systems: A Deployment-Oriented Study of Quality-Cost Trade-offs

Production LLM systems accumulate reusable operational experience, but the practical deployment issue is not merely whether such experience can help. It is how different serving strategies trade off quality against online cost under realistic constraints. Injecting external experience can improve task quality, yet it also increases prompt burden, latency, and serving pressure. We study external experience serving as a deployment-oriented quality-cost trade-off problem. We evaluate this question in a real production moderation setting, with tool-use and GPQA as supporting contrast tasks that expose different output-cost regimes. We compare no-experience baselines, random experience controls, global prompt injection, and retrieval-based selective injection, and analyze both task quality and serving cost. The results show that, once experience becomes case-dependent, selective retrieval provides a stronger operating point than unconditional global injection. They further show that retrieval quality matters more than simply increasing Top-$K$, and that the same serving policy can exhibit substantially different cost-benefit profiles across short-output and decode-heavy regimes. These findings suggest that external experience is best treated as a selective, cost-aware serving decision rather than as a universal add-on. Overall, in the settings studied here, external experience pays off only when both the serving interface and the task-specific cost structure make its quality gains worth the online cost.

25.
arXiv (CS.AI) 2026-06-17

From Brewing to Resolution: Tracing the Internal Lifecycle of Code Reasoning in LLMs

arXiv:2606.17648v1 Announce Type: new Abstract: Standard accuracy metrics cannot explain why LLMs handle variable tracking but fail on semantically equivalent loops. We study an internal lifecycle of code reasoning in which models first brew the answer, making it linearly recoverable many layers before it becomes self-decodable, and then diverge into one of four resolution outcomes: Resolved, Overprocessed, Misresolved, or Unresolved. Understanding this lifecycle matters because similar task accuracies can mask fundamentally different failure modes that surface-level evaluation cannot detect. We introduce a dual diagnostic framework pairing layer-wise linear probing with Context-Stripped Decoding (CSD) and apply it to six code-reasoning task families across 16 models spanning Qwen, Llama, and DeepSeek architectures. All four outcomes carry substantial mass in every task family: overall Resolved is only 41.5%, with multiple tasks below 30%. Controlled sweeps over structure, depth, and operators expose task-specific failure bottlenecks: Function Call Resolved plunges from 61.1% to 2.5% as call depth increases from one to three. Across architectures and scales, the brewing scaffold remains stable, with normalized brewing duration 24-42% across all 16 models, while resolution success varies with capability. This indicates that the scaffold is a stable empirical regularity across the tested decoder-only Transformer families, whereas resolution success covaries with capability, scale, and training. Code: https://github.com/euyis1019/llm-brewing