×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Kang An ×
换一批
01.
arXiv (CS.AI) 2026-06-16

From Detection to Recovery: Operational Analysis on LLM Pre-training with 504 GPUs

arXiv:2605.09370v5 Announce Type: replace-cross Abstract: Large-scale AI training is fundamentally a distributed systems problem, where hardware failures are routine operating conditions rather than rare exceptions, yet public operational evidence from production training clusters remains limited. This report presents an empirical analysis of a 63-node NVIDIA B200 production cluster (504 GPUs), using 55 days of Prometheus time-series data and 73 days of operational logs covering 224 multi-node training sessions. The environment is cross-organizational: five parties (SKT, Upstage, Lablup, NVIDIA Korea, VAST Data) share a unified monitoring pipeline. This enabled joint diagnosis of a 60-node-scale storage I/O bottleneck absent in 2-4-node tests, a production-scale phenomenon no single team could isolate alone. We perform three quantitative analyses yielding four findings. First, over 751 Prometheus metrics and 10 XID-identified GPU failures, no single metric is consistently dominant across failure types, motivating multi-signal detection. Second, 523 checkpoint events trace the save/load path from GPU VRAM to the NFS server: restart loading reaches 21.5% of maximum read bandwidth (700 GB/s) and save bursts 16.0% of maximum write bandwidth (250 GB/s), with NFS/RPC queueing and transport-layer backlog rising together. Third, across 224 sessions over 73 days, node exclusions concentrate so the top 3 of 63 nodes account for over 50%. Fourth, auto-retry chain analysis shows a 33.3% success rate over 12 chains (73 attempts), 2.7x the 12.5% manual rate, with a median retry interval of 11 minutes (IQR 10-11). All analyses are grounded in production infrastructure providing session-level workload management, GPU-centric scheduling, and unified observability.

02.
arXiv (CS.CV) 2026-06-18

SVHighlights: Towards Extremely Long Sport Video Highlight Detection

While highlight detection for long-form videos is of great practical importance, most existing methods remain limited to short-form content, largely due to the absence of a suitable benchmark. To bridge this gap, we introduce SVHighlights, to the best of our knowledge, the first benchmark for highlight detection in extremely long sports videos, each exceeding one hour in duration, across multiple sports categories. SVHighlights is constructed from pairs of full-length sports videos and their corresponding official highlight videos using a dataset generation pipeline, enabling scalable label generation without conventional per-clip saliency annotation. The benchmark comprises 320 videos with an average duration of 2.00 hours and a total of 640.18 hours, substantially exceeding previous datasets. Existing methods also face fundamental challenges on long videos: models trained on short clips fail to generalize to hour-long content, and their clip-level scoring lacks the broader context needed to identify highlights. To address this and provide a strong baseline, we present TF-SELECTOR, a training-free segment-based approach that divides each video into context-aware segments by merging adjacent shots sharing the same semantic content, and predicts segment-level saliency scores using a large language model with multimodal inputs including visual captions, transcripts, and audio volume. Experiments demonstrate that TF-SELECTOR achieves superior performance across most metrics compared to Video Temporal Grounding (VTG)-tuned baselines, with improvements of +2.50 in HIT@1, +4.04 in HIT@K, and +2.95 in IoU. These results establish SVHighlights as a challenging testbed for long-form highlight detection and demonstrate that a simple segment-based strategy can effectively scale to hour-long videos.

03.
arXiv (CS.AI) 2026-06-12

Learning What to Remember: Observability-Safe Memory Retention via Constrained Optimization for Long-Horizon Language Agents

arXiv:2606.10616v2 Announce Type: replace Abstract: Long-horizon language agents accumulate observations, reasoning traces, and retrieved facts that exceed their finite context windows, making memory retention a fundamental resource-allocation problem. Existing memory systems improve management through heuristic scoring, retrieval optimization, or learned compression, but largely treat retention as a local decision problem and do not explicitly model its long-term consequences under realistic observability constraints. To fill this gap, we formulate memory retention as a constrained stochastic optimization problem with explicit budget feasibility, evidence utility, and delayed costs including miss penalties, reacquisition delays, and stale-information risk. We then propose OSL-MR (Observability-Safe Learning for Memory Retention), a novel framework that enforces a strict separation between online-observable features and offline-available supervision (OAS). OSL-MR combines an evidence learner trained from realized evidence supervision with a Mixed-Score heuristic that serves both as a deployable online-safe baseline and as a structured inductive prior for learning. The resulting policy learns query-conditioned evidence value directly from interaction data while remaining deployable under the same observability constraints. Experiments on LOCOMO and LongMemEval show that OSL-MR consistently outperforms recency-based methods, Generative Agents-style scoring, and other heuristic baselines, particularly under tight memory budgets. The Mixed-Score prior further improves precision while preserving recall, and sensitivity analysis demonstrates robustness across a wide range of cost configurations.

04.
arXiv (CS.CL) 2026-06-15

AgentSpec: Understanding Embodied Agent Scaffolds Through Controlled Composition

LLM agents are increasingly built not as single model calls, but as scaffolded systems that combine reasoning, memory, reflection, action execution, and learning. While such scaffolds often improve performance, they are often embedded in tightly coupled pipelines, making it difficult to isolate component contributions, compare alternative designs, or understand how module interactions shape agent behavior. We introduce AgentSpec, a modular specification framework that represents embodied agents as typed compositions of reusable policy components with standardized interfaces. AgentSpec standardizes the interfaces among perception, memory, reasoning, reflection, action, and optional learning, enabling components to be swapped and recombined under controlled conditions. We instantiate this framework across DeliveryBench, ALFRED, MiniGrid, and RoboTHOR, and analyze reasoning, memory, reflection, and reinforcement-learning modules across model backbones. Our results show that agent performance is governed by scaffold compatibility and interaction effects rather than isolated module strength. In particular, structured multi-granularity memory improves long-horizon state tracking, reasoning and memory interact non-uniformly across environments, reflection trades off correction and cost, and RL-trained policies compose best when optimized with deployment-time scaffold structure. AgentSpec provides a controlled foundation for studying, comparing, and designing composable LLM agents. Our code, baselines and interactive playground are publicly available at https://agentspec-embodied.github.io.

05.
arXiv (CS.AI) 2026-06-15

FactoryLLM: A Safe and Open-Source AI Playground for Evaluating LLMs in Smart Factories

arXiv:2606.14119v1 Announce Type: new Abstract: Fault diagnostics and recovery in smart factories is challenging because critical information is dispersed across manuals of multiple machines which are interconnected through the manufacturing process. Large Language Models (LLMs) can provide a promising approach. In this paper, we propose FactoryLLM, a safe and open-source AI playground designed for evaluating different LLM-based retrieval-augmented generation (RAG) models by analysing documents from multiple machines across the manufacturing process. FactoryLLM enables the user to configure the LLM, and assess performance when reasoning over multiple documents, through a dual evaluation setup using both RAGAS and NVIDIA's LLM-as-a-Judge metrics. FactoryLLM is safe because it allows users to run local or open-source LLMs without sharing sensitive industrial data, providing a controlled environment for experimentation. We demonstrate the efficacy of FactoryLLM through a case study which involves an Autonomous Intelligent Vehicle and its Mobile Planner software, evaluating three LLMs across 30 maintenance queries derived from approximately 600 pages of cross-machine documentation. The results suggest that FactoryLLM is effective in cross-machine document reasoning: every model achieved a groundedness score above 0.88. The full code and documentation for community to test FactoryLLM with their manufacturing specific scenarios are publicly available.

06.
arXiv (CS.AI) 2026-06-12

FinSTaR: Towards Financial Reasoning with Time Series Reasoning Models

arXiv:2605.03460v3 Announce Type: replace Abstract: Time series (TS) reasoning models (TSRMs) have shown promising capabilities in general domains, yet they consistently fail in the financial domain, which exhibits unique characteristics. We propose a general 2 x 2 capability taxonomy for TSRMs by crossing 1) single-entity vs. multi-entity analysis with 2) assessment of the current state vs. prediction of future behavior. We instantiate this taxonomy in the financial domain-where the distinction between deterministic assessment and stochastic prediction is particularly critical-as ten financial reasoning tasks, forming the FinTSR-Bench benchmark based on S&P stocks. To this end, we propose FinSTaR (Financial Time Series Thinking and Reasoning), trained on FinTSR-Bench with distinct chain-of-thought (CoT) strategies tailored to each category. For assessment, which is deterministic (i.e., computable from observable data), we employ Compute-in-CoT, a programmatic CoT that enables models to derive answers directly from raw prices. For prediction, which is inherently stochastic (i.e., subject to unobservable factors), we adopt Scenario-Aware CoT, which generates diverse scenarios before making a judgment, mirroring how financial analysts reason under uncertainty. The proposed method achieves 78.9% average accuracy on FinTSR-Bench, substantially outperforming LLM and TSRM baselines. Furthermore, we show that the four capability categories are complementary and mutually reinforcing through joint training, and that Scenario-Aware CoT consistently improves prediction accuracy over standard CoT. Code is available at https://github.com/seunghan96/FinSTaR.

07.
arXiv (CS.AI) 2026-06-16

ATOM-Bench: A Real-World Benchmark for Atomic Skills and Compositional Generalization in Manipulation Policies

arXiv:2606.16826v1 Announce Type: cross Abstract: Generalist manipulation policies are increasingly presented as foundation models for robotic control, but their real-world generalization remains difficult to diagnose. A policy may succeed on demonstrated tasks while still failing to execute fine-grained atomic skills or recombine learned skills in new task structures. We introduce ATOM-Bench, a real-world benchmark for evaluating both atomic skills and compositional generalization in manipulation policies. ATOM-Bench factorizes tabletop manipulation into motor atoms and instruction atoms, and contains 30 atomic tasks and 24 held-out compositional tasks across paired single-arm and dual-arm robot tracks. We collect 3,000 human demonstrations for atomic fine-tuning and release both the demonstration data and evaluation rollout data to support reproducible real-world evaluation. Policies are fine-tuned on atomic tasks and evaluated on both atomic skill acquisition and held-out compositional tasks. We further introduce Atomic Score (AS) and Compositional Failure Share (CFS) to distinguish failures caused by weak atomic skills from failures caused by limited compositional reuse. Through 2,700 physical rollouts on five representative manipulation policies, we find that current policies can acquire simple instruction-grounding skills, but still struggle with fine-grained motor atoms, counting, and logical filtering. More importantly, strong atomic performance does not reliably transfer to held-out compositional tasks. ATOM-Bench provides a diagnostic testbed for studying whether failures arise from weak motor execution, poor instruction grounding, or limited compositional reuse.

08.
arXiv (CS.LG) 2026-06-12

LongSpike: Fractional Order Spiking State Space Models for Efficient Long Sequence Learning

arXiv:2606.12895v1 Announce Type: new Abstract: Spiking Neural Networks (SNNs) are well-regarded for their biological plausibility and energy efficiency in processing sequential data. However, dominant SNN architectures typically rely on first-order Ordinary Differential Equations (ODEs) to govern neuronal state transitions. This first-order assumption imposes a "memoryless" bottleneck, limiting the model's capacity to capture the complex, long-range dependencies inherent in long-sequence tasks. In this work, we propose LongSpike, a novel SNN framework that integrates fractional-order State-Space Modeling, or f-SSM, from control theory into the spiking domain. By extending traditional integer-order SSMs to the fractional-calculus regime, LongSpike enables the hierarchical integration of neuronal dynamics with long-memory kernels. To mitigate the computational overhead and parallelization challenges typically associated with fractional operators, we leverage a state-space formulation that supports efficient, parallel training. Empirical evaluations on challenging benchmarks, including Long Range Arena (LRA), large-scale WikiText-103, and Speech Commands, demonstrate that LongSpike outperforms state-of-the-art SNNs in accuracy while preserving sparse synaptic computation. The code is available at https://github.com/xinruihe389-commits/LongSpike.

09.
arXiv (CS.CV) 2026-06-19

One-Shot Novel View and Pose Human Image Synthesis via 3D Prior Guided Diffusion Model

This paper addresses the challenge of one-shot novel view and pose human image synthesis. The existing methods transfer the reference human image to a target pose using a set of 2D pose keypoints or synthesize human images based on generalizable human NeRF which uses human model priors to extract point-wise features. However, pose transfer based methods can not handle complex human pose using ambiguous 2D pose as the condition, while generalizable human NeRFs may be inaccurate to recover occluded/invisiable human parts without extracted reliable features. To solve these problems, we propose a novel approach for novel view and pose synthesis from a singe human image via conditional denoising diffusion model. Our diffusion model divides the novel view and pose synthesis problem into a sequence of conditional denoising steps. Specifically, to generate humans with complex and arbitrary poses, we introduce 3D human priors, i.e., 3D normal map and color prompt, as geometry and color conditions into the generation process. By transferring the reference human into the target human with a series of diffusion steps, our diffusion model enables high-quality synthesis including the occluded/invisible parts. Further, we propose a self-reconstruction based customized refinement to enhance fine details when tested on novel persons.Experimental results on different public datasets demonstrate that our approach significantly outperforms previous methods and also shows better generalization ability across datasets. The code will be made publicly available at https://github.com/Yankeegsj/3DPGDM.

10.
arXiv (CS.CV) 2026-06-17

SCC-Loc: A Unified Semantic Cascade Consensus Framework for UAV Thermal Geo-Localization

Cross-modal Thermal Geo-localization (TG) provides a robust, all-weather solution for Unmanned Aerial Vehicles (UAVs) in Global Navigation Satellite System (GNSS)-denied environments. However, profound thermal-visible modality gaps introduce severe feature ambiguity, systematically corrupting conventional coarse-to-fine registration. To dismantle this bottleneck, we propose SCC-Loc, a unified Semantic-Cascade-Consensus localization framework. By sharing a single DINOv2 backbone across global retrieval and MINIMA$_{RoMa}$ matching, it minimizes memory footprint and achieves zero-shot, highly accurate absolute position estimation. Specifically, we tackle modality ambiguity by introducing three cohesive components. First, we design the Semantic-Guided Viewport Alignment (SGVA) module to adaptively optimize satellite crop regions, effectively correcting initial spatial deviations. Second, we develop the Cascaded Spatial-Adaptive Texture-Structure Filtering (C-SATSF) mechanism to explicitly enforce geometric consistency, thereby eradicating dense cross-modal outliers. Finally, we propose the Consensus-Driven Reliability-Aware Position Selection (CD-RAPS) strategy to derive the optimal solution through a synergy of physically constrained pose optimization. To address data scarcity, we construct Thermal-UAV, a comprehensive dataset providing 11,890 diverse thermal queries referenced against a large-scale satellite ortho-photo and corresponding spatially aligned Digital Surface Model (DSM). Extensive experiments demonstrate that SCC-Loc establishes a new state-of-the-art, suppressing the mean localization error to 9.37 m and providing a 7.6-fold accuracy improvement within a strict 5-m threshold over the strongest baseline. Code and dataset are available at https://github.com/FloralHercules/SCC-Loc.

11.
bioRxiv (Bioinfo) 2026-06-12

Deciphering cross-omics complexity of tissues via diagonal integration of unpaired spatial multi-omics data

Recent spatial multi-omics technologies enable the simultaneous in situ profiling of multiple omics modalities on the same tissue section; however, they face challenges in experimental complexity and high costs. This technical limitation can be circumvented by diagonal integration methods, which integrate omics data from different modalities. However, existing single-cell diagonal integration approaches overlook spatial information, causing unreliable anchoring across omics layers. Here, we introduce STAMO, a graph attention neural network model for spatially aware integration of unpaired spatial slices from different omics. Systematic benchmarking on spatial epigenome-transcriptome slices proves that STAMO outperforms the state-of-the-art methods in generating aligned embeddings and identifying consensus spatial domains across omics. We apply STAMO to integrate unpaired data from diverse spatial omics types (transcripts, epigenetics, DNA, and proteins), including slices from spatial RNA and four different epigenomic modalities, spatial ATAC and RNA slices across embryonic stages, spatial protein and RNA slices, and spatial DNA and RNA slices. In addition, the integration capability of STAMO can be further used to achieve cross-omics generation, offering a solution for exploring spatial region-specific gene regulatory mechanisms.

12.
arXiv (CS.AI) 2026-06-15

CoRe-MoE: Contrastive Reweighted Mixture of Experts for Multi-Terrain Humanoid Locomotion with Gait Adaptation

arXiv:2606.04718v3 Announce Type: replace-cross Abstract: Humans primarily rely on walking and running to traverse complex terrains. Similarly, humanoid robots should be able to smoothly transition between walking and running while maintaining natural and stable locomotion. However, unifying gait transition and multi-terrain adaptation within a single policy remains challenging due to gradient interference between tasks and the distribution shift caused by terrain variations. Although Mixture-of-Experts (MoE) architectures can mitigate multi-skill interference, direct joint training often fails to achieve clear expert specialization. To address these challenges, we propose CoRe-MoE, a two-stage reinforcement learning framework that decouples gait generation from terrain adaptation. In the first stage, a stable locomotion policy is learned to produce natural walking and running behaviors with smooth transitions. In the second stage, a terrain-aware MoE branch is introduced, and the gating network is trained with a contrastive objective to learn structured terrain representations and promote expert specialization. The final action is obtained through weighted fusion of the base gait policy and the terrain-aware branch, enabling the policy to preserve stable locomotion while adapting to complex terrains. Extensive simulation results demonstrate that the proposed method outperforms baseline approaches in terms of success rate, locomotion stability, and multi-terrain adaptability. Furthermore, zero-shot deployment on a Unitree G1 humanoid robot validates the effectiveness of our framework, achieving robust walking and running across stairs, slopes, steps, obstacles, and unstructured outdoor terrains while maintaining accurate foothold control and dynamic stability.

13.
arXiv (CS.LG) 2026-06-16

CADO: From Imitation to Cost Minimization for Heatmap-based Solvers in Combinatorial Optimization

arXiv:2602.08210v2 Announce Type: replace Abstract: Heatmap-based solvers have emerged as a promising paradigm for Combinatorial Optimization (CO). However, we argue that the dominant Supervised Learning (SL) training paradigm suffers from a fundamental objective mismatch: minimizing imitation loss (e.g., cross-entropy) does not guarantee solution cost minimization. We dissect this mismatch into two deficiencies: Decoder-Blindness (being oblivious to the non-differentiable decoding process) and Cost-Blindness (prioritizing structural imitation over solution quality). We empirically demonstrate that these intrinsic flaws impose a hard performance ceiling. To overcome this limitation, we propose CADO (Cost-Aware Diffusion models for Optimization), a streamlined Reinforcement Learning fine-tuning framework that formulates the diffusion denoising process as an MDP to directly optimize the post-decoded solution cost. We introduce Label-Centered Reward, which repurposes ground-truth labels as unbiased baselines rather than imitation targets, and Hybrid Fine-Tuning for parameter-efficient adaptation. CADO achieves state-of-the-art performance across diverse benchmarks, validating that objective alignment is essential for unlocking the full potential of heatmap-based solvers.

14.
arXiv (CS.CV) 2026-06-18

Moebius: 0.2B Lightweight Image Inpainting Framework with 10B-Level Performance

While 10B-level industrial foundation models have pushed the boundaries of image inpainting, their prohibitive computational costs severely hinder practical deployment. Constructing a highly optimized task-specific specialist offers a promising solution; however, extreme structural compression inevitably triggers a severe representation bottleneck. To conquer this, we propose Moebius, a highly efficient lightweight inpainting framework. We systematically reconstruct the diffusion backbone by introducing the Local-$\lambda$ Mix Interaction ($L\lambda MI$) block. Comprising Local-$\lambda$ and Interactive-$\lambda$ modules, it elegantly summarizes spatial contexts and global semantic priors into fixed-size linear matrices, preserving complex latent interactions while drastically shedding parameters. Furthermore, to unlock the full representational capacity of this highly compact architecture, we synergistically pair it with an adaptive multi-granularity distillation strategy. Operating strictly within the latent space to avoid expensive pixel-space decoding, this strategy dynamically balances multiple gradient-based losses to achieve high-fidelity alignment. Extensive experiments across natural and portrait benchmarks demonstrate that this optimal synergy enables Moebius to rival or even surpass the generation quality of the 10B-level industrial generalist FLUX.1-Fill-Dev. Remarkably, Moebius achieves this using less than 2\% of the parameters (0.22B vs. 11.9B) while delivering a $>15\times$ acceleration in total inference time, setting a new efficiency standard for high-fidelity inpainting. Project page at https://hustvl.github.io/Moebius.

15.
arXiv (CS.AI) 2026-06-16

Knowledge-Based Zero-Replay Debugging of Multi-Agent LLM Traces

arXiv:2606.14805v1 Announce Type: cross Abstract: Reliable operation of multi-agent large language model (LLM) systems depends on debugging long execution traces, where the few causally decisive events are buried in unstructured logs of messages, routes, memory writes, and tool calls. The standard tool is counterfactual replay (rewind, edit, and re-run the trajectory to measure each event's effect), but its cost grows linearly with the number of candidate events, making exhaustive replay infeasible at scale. We frame trace debugging as a knowledge-based decision-support problem. Each trace is compiled into a structured event knowledge graph over routing, memory, tool-use, uncertainty, and latent evidence, and a calibrated predictor decides where a scarce replay budget should be spent. We do not propose a new replay oracle; we propose a method to predict its results without paying the replay cost. We formulate zero-replay counterfactual-effect prediction: given a trace under a fixed budget, predict which events the oracle would mark high-effect before any replay is performed. BranchPoint-Latent is a lightweight predictor over observable, structural, uncertainty, and latent features of the knowledge graph. Calibrated against a deterministic replay oracle across 37 trace families, a single learning-to-rank gradient-boosted predictor raises per-trace localization (Branch Recall@5) from 0.73 to 0.93 on held-out families at zero oracle-replay cost. Rather than claiming universal dominance, we characterize when cheap graph centrality suffices and when learned evidence is necessary. The result is an auditable, cost-efficient decision-support system for AI-reliability debugging, positioned explicitly on the cost-accuracy frontier with reproducible artifacts.

16.
arXiv (CS.CL) 2026-06-15

TA-RAG: Tone-Aware Retrieval-Augmented Generation for Peer-Support Health Communication

Retrieval-augmented generation (RAG) successfully grounds large language model (LLM) outputs in trusted documents, but factual grounding alone is insufficient for sensitive peer-support health communication. In domains such as HIV peer support, responses must also be accessible, stigma-free, empathetic, and tailored to the recipient. This paper presents TA-RAG, a lightweight, prompt-based tone-aware RAG framework that embeds explicit tone control into a RAG pipeline without requiring model fine-tuning. We operationalise tone across four core components: stigma-free rewriting, readability adjustment, recipient adaptation, and empathy rephrasing. We evaluate TA-RAG through component-level tests using questions derived from HIV Online Learning Australia (HOLA), UNAIDS terminology guidance, readability metrics, peer-support standards from National Association of People with HIV Australia (NAPWHA), and a public empathy dataset. Results show that the TA-RAG's components improve their targeted communication quality while preserving key content. These findings emphasise that prompt-based tone control is a potential direction for making RAG outputs suitable for sensitive peer-support health communication.

17.
arXiv (CS.CV) 2026-06-15

HiLo-Token: Input-Adaptive High-Low Frequency Token Compression for Efficient Image Editing

Creative image editing tools, such as Photoshop's Remove or Generative Fill buttons, are central to everyday customer use and account for a major share of traffic in Photoshop and Lightroom. However, current generative AI models face significant latency challenges, which become even more pronounced when transitioning from convolution-based U-Nets to Diffusion Transformers (DiTs). In our evaluation on hundreds of representative image editing samples spanning a wide range of mask ratios, the DiT module alone accounts for an average of 73% of the total model latency, even after being distilled from 50 timesteps down to 8 timesteps. To tackle this challenge, we propose $HiLo-Token$, an input-adaptive token compression framework that allocates more token budget to high-frequency, rich-context regions while assigning fewer tokens to low-frequency areas. Specifically, for the editing region specified by the user mask, we retain all tokens within a dilated mask to preserve strong locality and contextual relevance. Outside the editing region, we introduce a simple yet effective high-frequency token selection strategy based on spatial frequency to capture important local details, while using tokens from a 16x downsampled image to represent low-frequency components and preserve the blurry but global structure. Extensive experiments on production-level evaluation data validate the effectiveness of the proposed method, achieving 3.13x, 2.59x, and 1.67x DiT speedups on A100-80GB for image editing tasks across small, medium, and large mask ratio categories with average ratios of 6.38%, 15.92%, and 35.36%, respectively, without any regression in generation quality.

18.
arXiv (CS.CV) 2026-06-11

P3D-Bench: Benchmarking MLLMs for Parametric 3D Generation and Structural Reasoning

Multimodal large language models can write code to produce complex programs as well as use programs to do 3D modeling, which opens up a new avenue for 3D generation powered by their priors, world knowledge and reasoning. Yet existing benchmarks rarely evaluate 3D modeling through code. Such modeling demands more than runnable code: from a text or visual specification, a model must generate a parametric 3D program that is geometrically precise, semantically aligned and assembly-consistent. We introduce P3D-Bench, a benchmark for parametric 3D generation. Unlike a 3D mesh, a parametric 3D program exposes explicit dimensions, construction operations and part relations, revealing whether a model recovers a design's structure, not just its appearance. Under a unified protocol, P3D-Bench covers three task families (Text-to-3D, Image-to-3D and Assembly-3D) and scores each output for executability, geometric fidelity, topology, text-grounded constraints, multiview semantic alignment and part-level structure. We evaluate frontier MLLMs and text-only LLMs on 400 text cases, 400 image cases and 203 annotated assemblies, with domain-specific models as reference points. Our extensive evaluation yields three findings. First, assemblies are the hardest setting, where models still fail to compose multiple parts into a coherent structure. Second, models can often recover the global shape and semantic identity of the target object, yet fail to reproduce the precise parametric geometry specified by the input. Third, part-level modeling remains weak on assemblies, where models recover neither the geometry of each part nor the right number of parts. These results position P3D-Bench as a benchmark for evaluating precise parametric geometry and part-level structure in parametric 3D generation.

19.
arXiv (CS.CV) 2026-06-16

X-Tokenizer: A Multimodal Action Tokenizer for Vision-Language-Action Pretraining

Modern Vision-Language-Action (VLA) models must bridge pretrained vision-language reasoning and precise continuous robot control. Existing action tokenizers discretize actions primarily for reconstruction, producing codes that preserve motion geometry but provide only weak semantic supervision to the backbone. We therefore formulate action tokenization not as mere compression, but as semantic interface learning between multimodal reasoning and executable control. To this end, we introduce X-Tokenizer, a lightweight encoder-Semantic Residual Quantization (SRQ)-decoder architecture that provides a shared action interface across diverse robotic arm embodiments. Its key component, SRQ, imposes an asymmetric structure on residual vector quantization: the first level is trained with Masked Action Modeling (MAM) to form a discrete action language that captures coarse motion intent, while deeper levels remain reconstruction-oriented residuals that preserve fine-grained details. To further align action tokens with multimodal semantics, X-Tokenizer is pretrained with contrastive alignment to the representation space of a pretrained foundation model and with next-frame vision-language feature prediction. Pretrained on 2.4M trajectories (2.0B action frames), a single frozen X-Tokenizer plugs into a mixed discrete-continuous VLA as a representation-shaping supervision signal. X-Tokenizer achieves top real-world aggregate and strong RoboTwin 2.0 simulation results. Outperforming FAST in multimodal grounding (+13.5%) and long-horizon tasks (+8.25), it shows that action tokenizers serve as semantic interfaces for VLA pretraining beyond mere action compression.

20.
arXiv (CS.LG) 2026-06-12

Generative Modeling of Bach-Style Symbolic Music: A Comparative Study of Autoregressive, Latent-Variable, and Adversarial Approaches

arXiv:2606.13626v1 Announce Type: cross Abstract: We study generative modeling of Bach-style symbolic piano music using a shared MIDI corpus and three model families: autoregressive LSTMs with attention, latent-variable models including recurrent VAEs and vector-quantized VAEs, and generative adversarial networks. We compare their ability to model polyphonic note sequences, learn useful latent representations, and generate stylistically coherent compositions. Our experiments show that the autoregressive LSTM with attention produces the most musically coherent samples, while vector quantization helps mitigate posterior collapse and yields more structured outputs than conventional recurrent VAEs. The adversarial approach captures local pitch patterns but remains difficult to train and generalizes less reliably to Bach's style. These results highlight the relative strengths and failure modes of autoregressive, latent-variable, and adversarial approaches for symbolic music generation.

21.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

22.
arXiv (CS.CV) 2026-06-18

SAMA: Semantic Anchor-aligned Augmentation for Unified Low-Resource Multimodal Information Extraction

Multimodal Information Extraction (MIE)-covering tasks such as Multimodal Named Entity Recognition (MNER), Relation Extraction (MRE), and Event Extraction (MEE)-is essential for understanding multimedia content but remains constrained by severe data scarcity. Although data augmentation is a promising remedy, existing approaches are impeded by coarse cross-modal alignment and fragmented, task-specific designs that fail to exploit shared semantic knowledge. To overcome these limitations, we introduce Semantic Anchor-aligned Multimodal Augmentation (SAMA), a unified framework for generating high-fidelity, task-aware synthetic data. SAMA constructs structured semantic anchors from ground-truth labels to guide a Collaborative Multi-Experts Multimodal Large Language Model (CME-MLLM), which integrates a Universal Adapter for shared semantics with Task-Specific Adapters to produce diverse yet constraint-compliant textual samples. For image synthesis, SAMA employs an Anchor-Preserving Diffusion mechanism that uses anchor-weighted prompts and latent conditioning to maintain critical semantic anchors while diversifying visual contexts. To eliminate the need for manual verification, SAMA further introduces a Dual-Constraint Filtering module that selects synthetic samples based on both cross-modal consistency and anchor fidelity. Extensive experiments across benchmark datasets for MNER, MRE, and MEE demonstrate that SAMA consistently outperforms state-of-the-art augmentation baselines under both fully supervised and low-resource settings, underscoring its versatility, robustness, and effectiveness.

23.
arXiv (CS.AI) 2026-06-16

SDFLoRA: Selective Decoupled Federated LoRA for Privacy-preserving Fine-tuning with Heterogeneous Clients

arXiv:2601.11219v3 Announce Type: replace-cross Abstract: Federated learning (FL) for large language models (LLMs) has attracted increasing attention as a privacy-preserving approach for adapting models over distributed data, where parameter-efficient methods such as Low-Rank Adaptation (LoRA) are widely adopted to reduce communication and memory costs. However, practical deployments often exhibit rank and data heterogeneity: clients operate under different low-rank budgets and data distributions, making direct aggregation of LoRA updates biased and unstable. Existing approaches either enforce a unified rank or align heterogeneous updates into a single shared subspace, which tends to mix transferable and client-specific directions and consequently undermines personalization. Moreover, under differential privacy (DP), perturbing such structurally mixed updates injects noise into directions that should remain purely local, leading to unnecessary utility degradation. To address these issues, we propose Selective Decoupled Federated LoRA (SDFLoRA), a structure-aware LoRA framework that decouples each client update into a shared component for aggregation and a private component that preserves client-specific semantics. Only the shared component participates in subspace alignment, while the private component remains local and uncommunicated, making the training DP-compatible and stabilizing aggregation under rank heterogeneity. By injecting noise only into the aggregated shareable update, this approach avoids perturbations to local directions and improves the utility-privacy trade-off. Experiments on multiple benchmarks demonstrate that SDFLoRA outperforms federated LoRA baselines and achieves a strong utility-privacy trade-off.

24.
arXiv (CS.CV) 2026-06-19

FUSE: Frequency-domain Unification and Spectral Energy Alignment for Multi-modal Object Re-Identification

Despite significant progress in multi-modal Re-Identification (ReID), existing methods tend to emphasize low-frequency cues. Consequently, they focus on attributes such as color, illumination, and coarse appearance, while overlooking mid and high-frequency structures that encode geometric, textural, and identity-discriminative details. This imbalance leads to incomplete spectral representations and unstable cross-modal alignment. To overcome these limitations, we introduce FUSE, a frequency-domain framework that reformulates multi-modal ReID as a two-stage process of spectral disentanglement and energy alignment. The proposed Spectral Decomposition Module (SDM) adaptively partitions features into low, mid, and high-frequency subspaces, enabling hierarchical spectral modeling. The Cross-Modal Alignment Module (CAM) further enforces energy alignment and subspace complementarity across modalities via frequency-consistency regularization. In addition, FUSE incorporates learnable frequency modulation to enhance robustness under varying illumination and heterogeneous sensor conditions. Extensive experiments on RGBNT201, RGBNT100, and MSVR310 show that FUSE achieves 9.1\% mAP and 9.5\% Rank-1 improvements, establishing an interpretable frequency-domain paradigm for multi-modal representation learning.

25.
arXiv (CS.CV) 2026-06-18

Pre-Deployment Robustness Stress Testing for CT Segmentation Systems Using Clinically Motivated Multi-Corruption Augmentation

Deep learning-based CT segmentation systems often achieve high accuracy on clean benchmark images, but their performance may degrade under heterogeneous clinical imaging conditions such as noise, resolution loss, contrast variation, intensity shift, and artifacts. This instability can limit reliable deployment in real-world medical imaging workflows. We propose Robustness via Augmented Multi-corruption Pipeline (RAMP), a robustness-oriented augmentation framework for CT segmentation. RAMP combines anatomically constrained spatial perturbations, CT intensity transformations, and stochastic multi-corruption composition to expose models to clinically plausible image degradation during training. Across two CT segmentation evaluation settings, RAMP achieved the strongest corrupted-image performance and the smallest clean-to-corrupted robustness gap. In the five-organ noisy evaluation benchmark, RAMP improved mean corrupted Dice from 0.610 to 0.753 and reduced the robustness gap from 0.264 to 0.064 compared with the nnU-Net baseline. In Abdomen1K, RAMP improved mean corrupted Dice from 0.633 to 0.789 and reduced the robustness gap from 0.290 to 0.070. Although RAMP did not achieve the highest clean-image Dice, it substantially mitigated worst-case segmentation collapse under severe image degradation. These results suggest that multi-corruption augmentation can serve as a practical pre-deployment strategy for improving the reliability of CT segmentation systems in heterogeneous clinical environments.