×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Jian Liang ×
换一批
01.
arXiv (quant-ph) 2026-06-16

REGRID-QAOA: A Resource-Efficient Graph-Reduced Hybrid QAOA Framework for Physics-Constrained Power System Islanding

arXiv:2606.15083v1 Announce Type: new Abstract: Quantum computing has rapidly emerged as a powerful paradigm for tackling computationally demanding problems. In particular, quantum optimization shows strong promise for hard combinatorial problems in power systems, where increasing distributed energy penetration heightens the need for intentional islanding to maintain grid reliability and resilience. However, power system islanding is an NP-hard combinatorial optimization problem that becomes computationally prohibitive for classical solvers as network size grows, motivating the use of quantum computing as a promising alternative pipeline. This study develops a resource-efficient hybrid QAOA islanding framework that brings physics-constrained power-system partitioning into the quantum optimization workflow. The framework combines coherency-informed graph reduction, physics-aware constraint modeling, and structured post-processing to efficiently convert shallow-circuit QAOA samples into high-quality feasible islanding decisions without deep circuits or large shot budgets. The proposed framework is validated on the standard IEEE benchmark systems (9-, 14-, 24-, 30-, 39-, and 57-bus), demonstrating that the hybrid workflow achieves Gurobi-optimal solution quality with a clear quantum resource advantage over vanilla QAOA, while the resulting islanding solutions satisfy all physical feasibility requirements after network separation. This study establishes QAOA-based islanding as a viable quantum approach for critical infrastructure, with structured post-processing as the key enabler of quantum resource efficiency.

02.
arXiv (quant-ph) 2026-06-15

Quantum Entanglement of Bethe States

arXiv:2606.14140v1 Announce Type: cross Abstract: We investigate the quantum entanglement of Bethe states across a family of integrable spin chains, including the XXX$_{\frac{1}{2}}$ model, its higher-spin generalizations (XXX$_s$), and the non-compact $SL(2,\mathbb{R})$ chain. For on-shell eigenstates, we perform a comprehensive scan of the bipartite entanglement entropy across the entire spectrum of finite chains with periodic boundary conditions, and identify the Bethe solutions that minimize and maximize the entanglement. These extremal solutions follow systematic, spin-dependent patterns in the Bethe quantum numbers. In the XXX$_{\frac{1}{2}}$ spin chain, for the antiferromagnetic chain, the state with minimal entropy always coincides with the lowest-energy state (the ground state) within a given fixed-magnon sector. For the higher-spin XXX$_s$ model, however, the lowest-entropy state is not always identical to the ground state, and can even be the state of highest energy. By contrast, the Bethe roots that maximize entropy exhibit considerably more intricate structure. Our analysis further reveals how special Bethe root configurations, such as singular and strange solutions, affect entanglement, and it uncovers characteristic entanglement features in the non-compact $SL(2,\mathbb{R})$ chain that are absent from compact spin chains. For off-shell Bethe states, we develop an optimization algorithm that extremizes the entanglement entropy over rapidity distributions, enabling us to explore the maximum entanglement achievable by a Bethe state without imposing the Bethe ansatz equations.

03.
arXiv (CS.CV) 2026-06-25

SyncLoop: A Multimodal Dual-Loop Framework for Self-Improving Mathematical Reasoning

Recent advances in multimodal large language models (MLLMs) have shown impressive reasoning capabilities. However, further enhancing existing MLLMs necessitates high-quality vision-language datasets with carefully curated task complexities, which are both costly and challenging to scale. Although recent self-improving models that iteratively refine themselves offer a feasible solution, they still suffer from two core challenges: (i) most existing methods augment visual or textual data separately, resulting in discrepancies in data complexity (e.g., over-simplified diagrams paired with redundant textual descriptions); and (ii) the evolution of data and models is also separated, leading to scenarios where models are exposed to tasks with mismatched difficulty levels. To address these issues, we propose C2-Evo, an automatic, closed-loop self-improving framework that jointly evolves both training data and model capabilities. Specifically, given a base dataset and a base model, C2-Evo enhances them by a cross-modal data evolution loop and a data-model evolution loop. The former loop expands the base dataset by generating complex multimodal problems that combine structured textual sub-problems with iteratively specified geometric diagrams, while the latter loop adaptively selects the generated problems based on the performance of the base model, to conduct supervised fine-tuning and reinforcement learning alternately. Consequently, our method continuously refines its model and training data, and consistently obtains considerable performance gains across multiple mathematical reasoning benchmarks. Our code, models, and datasets will be released.

04.
arXiv (CS.CV) 2026-06-12

Point-Wise Geometry-Aware Transformer for Partial-to-Full Point Cloud Registration in Computer-Assisted Surgery

Partial-to-full registration remains challenging due to varying overlap ratios, fluctuating point densities, and the presence of noise. While transformers have shown strong potential for point cloud processing, prior methods typically confine them to global context aggregation, overlooking fine-grained local geometry crucial for accurate correspondence. We propose GAPR-Net, a learning-based point cloud registration framework with a coarse-to-fine architecture that combines convolution and transformer modules, in which local and global information is fused between the partial and full point clouds using a cross-attention mechanism. To achieve this, a transformation-invariant point-wise geometric feature representation is proposed, which can robustly capture relative geometric features for individual points with respect to their neighboring points. To evaluate the effectiveness of the proposed approach, experiments are conducted on four geometrically distinct bones, including the tibia, femur, pelvis, and thoracic cartilage. The overall registration recall reaches 94.2\%, the method results in a low RMSE of 1.992 mm and $R^2$ values of 0.908 and 0.974 for rotation and translation, respectively. The results demonstrate that the proposed method effectively addresses the partial-to-full point cloud registration problem. The proposed method enables highly accurate 3D point cloud registration using partial observation, providing a critical foundation for precise surgical navigation and robotic interventions in computer-assisted surgery. The code will be accessed after the double-blind review process.

05.
arXiv (CS.CV) 2026-06-18

MolmoMotion: Forecasting Point Trajectories in 3D with Language Instruction

Motion forecasting is central to visual intelligence: agents must anticipate how objects will move in order to plan actions, reason about physical interactions, and synthesize realistic futures. We argue that 3D points in world coordinates provide a general representation that is class-agnostic, view-stable, compact, and directly useful for downstream tasks. We formalize the task of goal-conditioned 3D point motion forecasting: given a short visual history, a set of 3D query points on an object of interest, and a language description of the intended goal, the model predicts the future 3D trajectory of each point. We introduce a full stack to study this task at scale: (1) MolmoMotion-1M is a large corpus of action-described, object-grounded 3D point trajectories annotated from 1.16M unconstrained videos; (2) PointMotionBench is a human-verified benchmark spanning 111 object categories and 61 motion types; and (3) MolmoMotion is a general motion forecasting model that supports both autoregressive coordinate prediction and flow-matching-based trajectory generation. MolmoMotion accurately predicts diverse motion patterns with different language instructions, and significantly outperforms existing motion prediction baselines on PointMotionBench. Finally, we show that the learned 3D motion prior transfers well to downstream applications: it improves training efficiency and generalization for robot manipulation, and its predicted trajectories provide effective motion guidance for generative models to synthesize videos with more realistic object motion.

06.
arXiv (CS.AI) 2026-06-16

Early Diagnosis of Wasted Computation in Multi-Agent LLM Systems via Failure-Aware Observability

arXiv:2606.01365v2 Announce Type: replace Abstract: Failure-aware observability diagnoses wasted computation in multi-agent LLM systems before final-answer evaluation can explain what went wrong. We propose a trace-based framework for a three-agent architecture – orchestrator, search agent, and execution agent – that converts structured events into online signals for loops, budget pressure, low information gain, and tool instability, then adds offline semantic grounding metrics and selective LLM-as-judge evaluation. On 165 GAIA validation traces under identical caps, 98 runs produce usable final answers and 67 fail or stop without one. Among warned failed runs, 58.1% of tokens are spent after the first warning on average, indicating substantial opportunity for intervention. A 10-task Level-2 pilot uses warnings to diversify search or require evidence, reducing post-warning token fraction from 0.638 in the baseline to 0.304. The results support a layered design: cheap online signals help the orchestrator redirect or halt redundant behavior, while deeper semantic checks identify whether completed answers are grounded enough to trust.

07.
arXiv (CS.AI) 2026-06-15

ChronoID: Infusing Explicit Temporal Signals into Semantic IDs for Generative Recommendation

arXiv:2606.14260v1 Announce Type: cross Abstract: Semantic IDs are crucial in generative recommendation, but with a fundamental limitation: temporal information is not well incorporated into semantic IDs. Instead, time influences recommendation only implicitly (e.g., through session construction heuristics, preference alignment, or sequence order), while existing semantic ID learning remains entirely time-agnostic. This design conflates interactions occurring under distinct temporal contexts into identical semantic representations, implicitly assuming that item semantics and user intent are temporally stationary. Such an assumption is misaligned with real-world recommendation scenarios, where evolving interaction rhythms play a central role. In this work, we investigate where and how the explicit time should be incorporated into semantic ID for generative recommendation. First, we systematically characterize the design space along three orthogonal dimensions of temporal signals and present a unified framework, ChronoID, for time-aware semantic ID learning. Then, by contributing a new time-explicit generation recommendation benchmark, ChronoID answers the questions: what is the effective way of infusing time, how to design the architecture, and where does the gain come from.

08.
arXiv (CS.CV) 2026-06-16

SurroundNEXO: Ego-Centric Metric Bridging for Spatially Consistent Geometry in Autonomous Driving

Modern autonomous driving depends on accurate metric 3D understanding for perception, reconstruction, and planning, which in turn requires reliable multi-camera depth prediction. However, the outward-facing nature of vehicle-mounted surround-view camera rigs inherently limits visual overlap across views, challenging the correspondence-based assumptions that underpin conventional multi-view geometry. To bridge this gap, we present SurroundNEXO, named after the Spanish word nexo for a geometric link, a low-overlap multi-camera metric depth framework that grounds cross-view reasoning in ego-centric geometry rather than dense visual correspondences. Instead of directly enforcing early global fusion, SurroundNEXO first assigns image tokens globally comparable ego-frame viewing directions through Ego-Ray Positional Encoding, then uses sparse LiDAR measurements as metric anchors to propagate absolute scale cues, and finally expands feature interaction progressively from view-local modeling to decomposed spatio-temporal reasoning and global integration. This design enables metric-scale depth prediction with improved spatial consistency across weakly overlapping cameras. Across low-overlap autonomous driving benchmarks, including NuScenes, Waymo and DDAD, SurroundNEXO reduces single-view error by 33.2%, improves cross-view consistency by 10.5%, and enhances metric reconstruction quality by 25.6% compared with SOTA methods. It further remains robust under extremely sparse depth prompts and exhibits strong zero-shot generalization to unseen camera layouts.

09.
arXiv (CS.AI) 2026-06-16

Toward Vibe Medicine: A Self-Evolving Multi-Agent Framework for Clinical Decision Support

arXiv:2606.15504v1 Announce Type: new Abstract: In recent years, the advances of large language models and autonomous agents have revolutionized the healthcare field, facilitating diagnosis and improving treatment results. However, most existing AI systems rely on pre-trained knowledge and predefined pipelines, which struggle to learn dynamically from the interactive chat session history that contains patient outcomes and past failures. To address this limitation, we propose VIBEMed, a multi-agent framework with a built-in self-evolution mechanism and architecture-level safety sandbox for robust clinical decision support. The system integrates three specialized agents, including a Clinical Diagnostic Agent (CDA) for hypothesis generation, a Therapeutic Execution Agent (TEA) for treatment planning, and a Clinical Evolution Manager Agent (CEMA) that distills longitudinal clinical feedback into reusable knowledge, transforming multimodal patient information into personalized medical decisions. Through self-evolution mechanism, the framework enables iterative updates across memory, model behavior, and decision strategies, allowing the system to improve over time. Experimental results show that VIBEMed demonstrates superior performance through its evolving mechanism in complex clinical cases, particularly in tasks that require integrated decision-making and longitudinal planning. The framework also supports reliable end-to-end decisions in challenging scenarios such as oncology treatment planning, highlighting its feasibility in real-world clinical contexts. Overall, VIBEMed provides a practical path beyond static AI systems toward adaptive, experience-driven clinical decision support, demonstrating the value of combining multi-agent collaboration with continuous evolution for advancing precision medicine.

10.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

11.
arXiv (CS.CL) 2026-06-17

GameCraft-Bench: Can Agents Build Playable Games End-to-End in a Real Game Engine?

Game generation is an emerging application of coding agents, requiring models to transform natural-language specifications into playable interactive systems. Unlike traditional coding tasks, game generation takes place within a game engine, where scripts, scenes, assets, rendering, and runtime interactions must jointly produce coherent gameplay. We formalize end-to-end game generation as the problem of producing a complete game artifact that realizes a specification through observable player-game interaction in a target environment. We argue that evaluating this setting requires three desiderata: Engine Grounding, Artifact Completeness, and Interactive Verification. We propose an interaction-grounded evaluation framework that assesses executable gameplay through replayed demonstrations and rubric-guided multimodal judging. We instantiate this framework as GameCraft-Bench, a benchmark comprising 140 Godot tasks across 15 game families. Evaluations of frontier coding agents show that end-to-end game generation remains highly challenging: the strongest agent achieves only 41.46%, and most agents score below 40%. Further analysis reveals that while agents often implement recognizable mechanics, they struggle to deliver complete games with sufficient content, functional visual feedback, and coherent presentation. See https://tongxuluo.github.io/gamecraft-bench-website for demos, code, and data.

12.
arXiv (CS.AI) 2026-06-16

UXBench: Measuring the Actionability of LLM-Generated UX Critiques

arXiv:2606.16262v1 Announce Type: cross Abstract: Large language models (LLMs) are increasingly deployed as UX judges that inspect interfaces, diagnose usability problems, and propose repairs. Yet no controlled benchmark measures whether the resulting critiques are reliable and actionable across heterogeneous product surfaces. We introduce UXBench, a benchmark for evaluating LLMs as interaction-grounded UX judges. UXBench comprises local-first runnable web fixtures spanning ten product-surface families, paired with coverage-gated browser exploration that forces models to collect interaction evidence before reporting. Each judge model produces a structured UX report over seven rubric dimensions; report quality is measured by whether a fixed downstream repair agent can improve the interface based on the critique. We evaluate eight frontier models under both an automated repair-lift protocol and a blind human validation study. Results show that UX judging is neither saturated nor one dimensional: models differ meaningfully in report actionability, exhibit distinct rubric-level repair signatures, vary in fixture-level reliability, and trade leadership across surface categories

13.
arXiv (CS.LG) 2026-06-12

BrainPro: Towards Large-scale Brain State-aware EEG Representation Learning

arXiv:2509.22050v2 Announce Type: replace Abstract: Electroencephalography (EEG) reflects underlying brain states, whose activities are distributed across brain regions and manifest as spatial patterns on the scalp. Learning these spatially structured, state-related patterns requires consistent spatial representations across datasets. However, existing EEG foundation models are typically based on self-attention, which does not preserve location-specific information and struggles to align signals recorded with different channel configurations. Moreover, brain states contain both shared and state-specific regional activity, suggesting that learning neurophysiologically plausible, state-aware representations can complement the shared representations targeted by current models and improve downstream decoding. To address these limitations, we propose BrainPro, a large EEG model that combines a retrieval-based spatial learning mechanism for cross-layout spatial alignment with a brain state-decoupling module that learns both shared and state-specific representations through parallel encoders and region-aware reconstruction. Pre-trained on a large EEG corpus, BrainPro achieves state-of-the-art performance across nine public BCI datasets spanning emotion, motor, speech, stress, mental disease, and attention tasks. Analyses of spatial filters, channel-drop robustness, and encoder contributions further validate the effectiveness of its spatial alignment and state-aware pathways. These results show that BrainPro achieves improved interpretability of learned spatial patterns and produces representations that benefit diverse EEG decoding tasks.

14.
arXiv (CS.AI) 2026-06-15

Dense Coordinate-List Fine-Tuning Induces a Controllable Interference Surface in Vision-Language Models

arXiv:2606.14507v1 Announce Type: new Abstract: Fine-tuning vision-language models to emit dense coordinate lists improves visual grounding but also changes how models serialize, repeat, and terminate structured outputs. We study this behavior as a generation and control surface. In Gemma 4 12B, high-capacity q/k/v/o LoRA raises class-aware F1@0.3 from 0.007 to 0.448 while inducing repeated-tail pressure (duplicate rate 0.080, max repeat 23). A q/v rank sweep keeps max repeat at 21-22 across ranks 4-64, showing capacity persistence. The target signal is separable: object-level repeat-stop removes exact repeated records (duplicate rate 0.000, max repeat 1) while preserving F1 (0.494 to 0.490) and stricter F1@0.5 (0.381 to 0.385). Structure-axis probes localize the effect to bbox-coordinate object lists; dense non-bbox and spatial/count JSON remain repeat-clean, including under high-capacity adapters. Qwen3-VL-8B reproduces a clean controlled endpoint (F1@0.3 0.318, duplicate rate 0.000), and COCO 2017 reproduces acquisition plus duplicate pressure. Dense coordinate-list adaptation therefore creates a structure-bound, cross-family interference surface that can be measured and controlled.

15.
arXiv (CS.CV) 2026-06-25

Yuvion VL: A Multimodal Foundation Model for Adversarial Content and AI Safety

General-purpose models often struggle to reliably identify and understand real-world multimodal risks, largely due to the inherent multimodal adversarial nature of content and AI safety. We present Yuvion VL, a family of multimodal large language models purpose-built for content and AI safety, with both instruction-tuned and reasoning-oriented variants. Yuvion VL addresses this gap by treating safety as an inherently adversarial and multimodal problem and designing the entire pipeline around adversarial robustness. For data construction, we develop an automated pipeline integrating adversarial-aware data synthesis with multi-stage quality control, producing large-scale, high-quality multimodal samples augmented with domain knowledge and reasoning annotations. For training, we adopt a three-stage pipeline that includes continued pretraining for risk-concept cross-modal alignment, instruct post-training for production-grade safety tasks, and reasoning post-training for enhanced interpretability and performance in complex tasks. We further introduce Confuse-then-Contrast Fine-Tuning, a contrastive framework that mines model-specific confusions and constructs multi-image contrastive groups to enforce explicit discrimination of fine-grained visual-semantic elements, enabling the model to distinguish between visually similar cases with different safety implications in adversarial safety tasks. To support rigorous evaluation, we further introduce Yuvion VL RiskEval (YVRE), a collection of benchmarks covering diverse open and internal evaluations, with a focus on content and AI safety, adversarial robustness, and real-world capability requirements. Experiments show that Yuvion VL-32B achieves industry-leading safety performance, surpassing comparably sized open-source models and best closed-source commercial models, while maintaining comparable general capabilities.

16.
arXiv (CS.CV) 2026-06-24

DiffusionBench: On Holistic Evaluation of Diffusion Transformers

Diffusion transformer (DiT) research on image generation has converged to a single evaluation setup: class-conditional generation on ImageNet. While methods improve the FID and related metrics, it is increasingly unclear whether they reflect real progress in generative modeling. The natural alternative, i.e., text-to-image (T2I) generation, is perceived as too costly or inconvenient to train and evaluate and is often skipped. We argue that this perception no longer holds. We introduce NanoGen, a unified DiT training and evaluation framework. NanoGen matches state-of-the-art DiT baselines on ImageNet and, with 12 lines of configuration change, also trains competitive text-to-image models. It currently supports RAE, VAE, pixel-space, and MeanFlow diffusion methods under both ImageNet and T2I setups. Under NanoGen, training T2I requires comparable compute to ImageNet. After training 21 latent diffusion models with NanoGen, we observe that method ranking shows no strong correlation between ImageNet and T2I generation: Pearson correlation is between -0.377 and -0.580 across three metrics. This suggests that a method which improves class-conditional ImageNet FID may show no corresponding improvement on T2I, clearly indicating the necessity of evaluating DiTs on both tasks. To this end, we summarize ImageNet and text-to-image results, which yields DiffusionBench, a holistic benchmark for DiT research. We recommend reporting DiffusionBench in place of ImageNet alone: methods that improve DiffusionBench are more likely to reflect broader progress.

17.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

18.
arXiv (CS.CV) 2026-06-16

VisualClaw: A Real-Time, Personalized Agent for the Physical World

Vision language models are serving as general-purpose interfaces for complex multimodal tasks. However, deployment still faces three gaps: VLMs typically incur high latency and cost when processing dense video frames and long prompts, the agent scaffold remains static after deployment, and standard video-QA benchmarks do not test whether agents can use visual evidence inside tool-using workspaces. We present VisualClaw, a self-evolving multimodal agent built around two principles. First, hybrid encoding reduces deployment cost by filtering less informative streaming frames with a cascaded gate and compressing the text skill bank through hot/cold top-k injection. Second, skill evolution lets the agent learn from failures: retrieved memories condition an evolver as direct concatenated context or as guided evidence, producing skill-bank updates that help future questions. Across 4 video-QA benchmarks with 2 VLMs, VisualClaw cuts per-question API cost by an average -98% versus full-frame upload and by -25.9% over the offline uniform 8 frame baseline, while boosting accuracy in most settings, e.g., an average +3.85% and a peak +15.80% on EgoSchema with Gemini 3 Flash. To address the gap, we curate VisualClawArena, a 200-scenario multimodal agentic benchmark built through a strict five-stage pipeline; models must use video evidence, documents, dynamic updates, and executable checks inside a workspace. On VisualClawArena, the same framework with computer-use agent backends improves macro accuracy by +2.9% for Codex (GPT-5.5) and +3.2% for Claude Code (Sonnet 4.6) over no-evolution baselines, with a -9.5% cost reduction compared to the uniform-sampled baseline. These properties make VisualClaw a natural fit for edge applications, where the cascade reduces a 1-hour streaming session from ~3,600 API uploads down to only 5-20 calls and the self-evolution makes it a perfect personalized assistant.

19.
arXiv (CS.LG) 2026-06-18

Learning to Annotate Delayed and False AEB Events: A Practical System for Extreme Class Imbalance and Asymmetric Label Noise

arXiv:2606.19186v1 Announce Type: cross Abstract: Autonomous Emergency Braking (AEB) optimization relies on accurately annotated real-world trigger events, particularly rare but critical delayed and false AEB triggers that expose system deficiencies. However, these minority samples comprise less than 5% of thousands of daily triggers, making manual annotation prohibitively expensive at scale. We present the first automated AEB annotation framework to address this problem. During development, we identified two fundamental challenges that severely impair delayed/false trigger annotation accuracy: (1) Extreme class imbalance where delayed/false triggers are overwhelmed by true triggers; (2) Asymmetric label noise where mislabeled majority samples (true triggers) suppress minority samples (delayed/false triggers) learning. To overcome these challenges, we propose two key innovations: (1) Specific data augmentation that synthesizes realistic samples by manipulating focal target attributes, transplanting ego-vehicle dynamics, and masking non-focal agents; (2) noise suppression using stable hardness estimation and probe-guided adaptive threshold to clean mislabeled true trigger samples. Crucially, we deploy our model as a practical annotation system with full-stack architecture, efficiently identifying critical delayed/false triggers from thousands of daily AEB events. Production results demonstrate 80% improvement in recall of delayed/false triggers and 50% reduction in manual workload. Beyond immediate gains, the system enables continuous self-improvement through accumulated high-quality annotations, establishing a necessary data foundation for on-vehicle AEB system optimization

20.
arXiv (CS.CV) 2026-06-25

2K Retrofit: Entropy-Guided Efficient Sparse Refinement for High-Resolution 3D Geometry Prediction

High-resolution geometric prediction is essential for robust perception in autonomous driving, robotics, and AR/MR, but current foundation models are fundamentally limited by their scalability to real-world, high-resolution scenarios. Direct inference on 2K images with these models incurs prohibitive computational and memory demands, making practical deployment challenging. To tackle the issue, we present 2K Retrofit, a novel framework that enables efficient 2K-resolution inference for any geometric foundation model, without modifying or retraining the backbone. Our approach leverages fast coarse predictions and an entropy-based sparse refinement to selectively enhance high-uncertainty regions, achieving precise and high-fidelity 2K outputs with minimal overhead. Extensive experiments on widely used benchmark demonstrate that 2K Retrofit consistently achieves state-of-the-art accuracy and speed, bridging the gap between research advances and scalable deployment in high-resolution 3D vision applications. Code will be released upon acceptance.

21.
arXiv (CS.CV) 2026-06-25

CoGeoAD: Hierarchical Color-Geometric Fusion with Multi-View Attention for Zero-Shot 3D Anomaly Detection

Zero-shot 3D anomaly detection is essential for industrial quality inspection, where labeled anomaly samples are scarce. Meanwhile, existing methods lack an effective mechanism to fuse complementary 2D color images with 3D geometric structures, limiting their ability to detect both surface and structural defects in a unified framework. To address these issues, we propose CoGeoAD, a unified CLIP-based framework that fuses color and geometric features by constructing pixel-aligned paired multi-view images. The framework introduces a Data-Driven Multi-View Attention (MVA) mechanism to adaptively aggregate 3D features and a Multi-Stage Color-Geometric Fusion (MS-CGF) module to hierarchically integrate multi-level features from both modalities. Extensive experiments on the MVTec3D-AD and Eyecandies benchmarks demonstrate that CoGeoAD achieves state-of-the-art performance, effectively capturing both structural and textural anomalies in complex industrial scenarios. our source code is available at https://github.com/kingdomShu/CoGeoAD.

22.
arXiv (CS.CV) 2026-06-17

FUSER: Feed-Forward MUltiview 3D Registration Transformer and SE(3)$^N$ Diffusion Refinement

Registration of multiview point clouds conventionally relies on extensive pairwise matching to build a pose graph for global synchronization, which is computationally expensive and inherently ill-posed without holistic geometric constraints. This paper proposes FUSER, the first feed-forward multiview registration transformer that jointly processes all scans in a unified, compact latent space to directly predict global poses without any pairwise estimation. To maintain tractability, FUSER encodes each scan into low-resolution superpoint features via a sparse 3D CNN that preserves absolute translation cues, and performs efficient intra- and inter-scan reasoning through a Geometric Alternating Attention module. Particularly, we transfer 2D attention priors from off-the-shelf foundation models to enhance 3D feature interaction and geometric consistency. Building upon FUSER, we further introduce FUSER-DF, an SE(3)$^N$ diffusion refinement framework to correct FUSER's estimates via denoising in the joint SE(3)$^N$ space. FUSER acts as a surrogate multiview registration model to construct the denoiser, and a prior-conditioned SE(3)$^N$ variational lower bound is derived for denoising supervision. Extensive experiments on 3DMatch, ScanNet and ArkitScenes demonstrate that our approach achieves the superior registration accuracy and outstanding computational efficiency.

23.
arXiv (CS.LG) 2026-06-11

TacCoRL: Integrating Tactile Feedback into VLA via Simulation

arXiv:2606.11743v1 Announce Type: cross Abstract: Vision-language-action (VLA) models provide strong visual, language, and action priors for robot manipulation, but visual observations alone often miss the local contact state required for contact-rich tasks. We present TacCoRL, a scalable framework that injects Tactile feedback into VLA policies and improves them through sim-real Co-training and simulation-based reinforcement learning (RL), without requiring large-scale tactile pretraining or extensive real-world contact exploration. The key idea is not only adding touch as an input, but learning how contact readings should modulate action responses in near-failure states that are rare in demonstrations and risky to collect on hardware. We use a real-aligned simulator as a closed-loop training environment for contact interaction. Mixed simulated and real trajectories first warm-start tactile-conditioned actions in the pretrained policy. Reinforcement learning with verifiable task rewards then optimizes the policy using simulated contact rollouts. It reinforces tactile-conditioned actions that lead to task completion, while a supervised objective on real trajectories keeps the refined policy anchored to deployment visual, tactile, and action distributions. The resulting policy transfers directly to the real robot without privileged simulation state or online real-world RL. Across four bimanual contact-rich tasks, the final visuo-tactile policy achieves an average success rate of 72.5%, compared to baseline of 50.0%. Result videos and more details are available at https://tac-corl.github.io/

24.
arXiv (quant-ph) 2026-06-11

Experimental Tabletop Petz recovery of a photonic qubit

arXiv:2606.12020v1 Announce Type: new Abstract: The quantum information lost in open evolutions cannot be fully recovered, but partial recovery is possible. The Petz recovery map guarantees almost optimal recovery, notably if the chosen reference state is close to the real one. This map has been widely used in theoretical studies, but has been the object of only a handful of experimental realisations, typically under a single fixed noise model. In this work, we describe and implement the Petz recovery map for a versatile class of qubit channels with tunable decoherence and dissipation. The setup we realize is also the first experimental example of ``tabletop reversibility'': for a good range of choices of the reference state, the Petz recovery map can be implemented with the same devices as the forward dissipative evolution, whose effect it is partially undoing. Our results demonstrate that the Petz recovery map can be resource-efficiently realized without requiring complex ancillary resources, providing a feasible pathway for mitigating information loss in quantum systems.

25.
arXiv (CS.AI) 2026-06-25

Distribution Preference Optimization: A Fine-grained Perspective for LLM Unlearning

arXiv:2510.04773v2 Announce Type: replace-cross Abstract: As Large Language Models (LLMs) demonstrate remarkable capabilities learned from vast corpora, concerns regarding data privacy and safety are receiving increasing attention. LLM unlearning, which aims to remove the influence of specific data while preserving overall model utility, is becoming an important research area. One of the mainstream unlearning classes is optimization-based methods, which achieve forgetting directly through fine-tuning, exemplified by Negative Preference Optimization (NPO). However, NPO's effectiveness is limited by its inherent lack of explicit positive preference signals. Attempts to introduce such signals by constructing preferred responses often necessitate domain-specific knowledge or well-designed prompts, fundamentally restricting their generalizability. In this paper, we shift the focus to the distribution-level, directly targeting the next-token probability distribution instead of entire responses, and derive a novel unlearning algorithm termed Distribution Preference Optimization (DiPO). We show that the requisite preference distribution pairs for DiPO, which are distributions over the model's output tokens, can be constructed by selectively amplifying or suppressing the model's high-confidence output logits, thereby effectively overcoming NPO's limitations. We theoretically prove the consistency of DiPO's loss function with the desired unlearning direction. Extensive experiments demonstrate that DiPO achieves a strong trade-off between model utility and forget quality. Notably, DiPO attains the highest forget quality on the TOFU benchmark, and maintains leading scalability and sustainability in utility preservation on the MUSE benchmark.