×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Heng Cao ×
换一批
01.
arXiv (CS.AI) 2026-06-12

Prism: Cost-Efficient Multi-LLM Serving via GPU Memory Ballooning

arXiv:2505.04021v3 Announce Type: replace-cross Abstract: Inference providers must maintain availability for many LLMs, including low-volume but essential models, making resource efficiency increasingly important as token prices fall. Analysis of production traces reveals a dynamic bursty-group pattern in which sets of models become active together and shift over time; existing space- and time-sharing approaches lack principled mechanisms to adapt to this variability, forcing trade-offs between SLO adherence and efficiency. We observe that elastic memory allocation can unify spatial and temporal sharing. Based on this insight, we have developed Prism, a memory-centric LLM co-serving framework that applies memory ballooning to reclaim memory across models and support both forms of sharing under a single scheme. Prism's balloon driver, referred to as kvcached, has been open-sourced at https://github.com/ovg-project/kvcached, and deployed in production environments across 10K+ GPUs.

02.
arXiv (CS.CV) 2026-06-16

FDIO: Frequency Decomposed Inertial Odometry

Pedestrian inertial odometry (PIO) estimates autonomous pedestrian motion using only acceleration and angular velocity measurements collected by an inertial measurement unit (IMU), making it highly valuable for consumer level localization applications. However, under a dual device acquisition setting, IMU signals collected by a freely carried mobile device are inherently composite signals in which the global motion of the human torso is coupled with perturbations induced by local limb motion. This coupling makes accurate human motion modeling more challenging. To address this issue, this paper proposes frequency decomposed inertial odometry (FDIO). The proposed method first decomposes input IMU signals into low frequency and high frequency components using a Laplacian pyramid. It then adopts a Mamba module to model long range motion information from the low frequency component and uses a multi scale convolution module to extract fine grained local dynamic features from the high frequency component. Experiments on five public PIO datasets show that FDIO achieves an average absolute trajectory error of 3.221~m and an average relative trajectory error of 2.550~m, reducing the errors by 33.3\% and 16.7\% compared with the RoNIN ResNet baseline, respectively. These results validate the effectiveness of the proposed frequency decomposition strategy. To the best of our knowledge, this work is among the first efforts to introduce Mamba and a frequency decomposition architecture into inertial odometry.

03.
arXiv (CS.CL) 2026-06-16

DoubtProbe: Black-Box Jailbreak Defense via Structural Verification and Semantic Auditing

As large language models (LLMs) are increasingly deployed in user-facing systems, black-box jailbreak defense has become an important practical problem. Existing defenses often rely on known-attack coverage, prompt-level semantic judgment, or local runtime control, yet these paths can become unstable under evolving prompt packaging, expression rewriting, and structure manipulation. We observe that many black-box jailbreaks do not remove the harmful goal, but reorganize the information needed to express and execute it, thereby evading safety alignment while remaining recoverable during generation. Motivated by this observation, we propose DoubtProbe, a dual-branch inference-time defense framework that combines structural verification with semantic auditing and formulates black-box jailbreak defense as consistency checking under controlled transformation. The structural branch extracts a structured representation from the original request, reconstructs the request under representation constraints, and detects information-preservation failures between the original and reconstructed requests; the semantic branch audits the original prompt directly. We evaluate DoubtProbe against representative black-box defenses on jailbreak and benign-request benchmarks, and further test backbone transfer from Qwen2.5-72B to Llama-3.1-70B. Results show that DoubtProbe achieves a stronger and more stable defense-utility trade-off: on Qwen2.5-72B, it reduces the JBB attack success rate from 0.293 to 0.100 and the CodeAttack attack success rate from 0.152 to 0.001, while maintaining false positive rates of 0.022 and 0.016 on AlpacaEval and OR-Bench; the same pattern remains stable on Llama-3.1-70B. These findings show that structural inconsistency signals provide a practical and generalizable basis for black-box jailbreak defense, especially when combined with semantic auditing.

04.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

05.
arXiv (CS.CL) 2026-06-11

Improving Cross-Format Robustness in Language Models with Multi-Format Training

Large language models often remain sensitive to answer format: a question solved correctly in one form may fail in another semantically equivalent form. To study this gap, we define cross-format robustness as the extent to which a model answers the same underlying question consistently across formats. We then compare full-format training with FormatMix, which expands only a subset of training items into multiple equivalent formats using either random or targeted selection. Across GLM4 and Llama-3.1, multi-format supervision consistently improves both task performance and cross-format robustness, whereas Multiple-choice question (MCQ)-only supervision alone brings little benefit and can even reduce robustness. We further find that expanding only about 30% of the training set into multiple formats often recovers most of the gain from full-format training, and this effect appears across the model families and sizes we study. These results suggest that format diversity, rather than additional supervision alone, is the key driver of robustness. That lightweight multi-format augmentation is a practical way to make LLMs less sensitive to answer format without changing the base model.

06.
arXiv (CS.CL) 2026-06-11

Breaking Entropy Bounds: Accelerating RL Training via MTP with Rejection Sampling

Reinforcement learning (RL) has become a key component in modern large language models, yet the rollout stage remains the key bottleneck in RL training pipelines. Although Multi-Token Prediction (MTP) offers a natural solution to accelerate rollouts through speculative decoding, many studies have observed that MTP acceptance rates degrade significantly during RL training, leading to limited speedup performance. To address this bottleneck, we present Bebop, a systematic study of MTP in LLM post-training, and offer practical recipes to integrate MTP into large-scale RL pipelines. First, we reveal that the MTP acceptance rate is fundamentally bounded by the fluctuation of model entropy, which demonstrates a clear negative linear relationship with the rise of entropy in the RL stage. Second, we show that probabilistic rejection sampling largely alleviates the disturbance introduced by entropy in RL compared to greedy draft sampling. We further identify that the conventional MTP training objectives (cross-entropy or KL) are suboptimal in such settings, and therefore we propose a novel end-to-end TV loss that directly optimizes multi-step rejection sampling acceptance rate, yielding ~10% acceptance rate improvements, achieving up to 95% acceptance rates and up to 25% extra inference throughput gains across mathematical reasoning, code generation, and agentic tasks. Third, we test various online MTP training strategies during RL and show that pre-RL MTP training with e2e TV loss and rejection sampling achieves a consistent acceptance rate and speedup throughout the entire RL, eliminating the need for costly online MTP updating. We provide extensive experiments and analysis that validate our findings. Experimental results show our method achieves up to 1.8x end-to-end acceleration in async RL training of Qwen3.5, Qwen3.6, and Qwen3.7 models.

07.
arXiv (CS.CV) 2026-06-17

Query-Efficient Video Adversarial Attack with Stylized Logo on Service Computing

In service computing, video classification has become fundamental to many intelligent applications. While Deep Neural Networks (DNNs) have demonstrated excellent performance in recognizing video content, recent studies have shown that DNNs are highly vulnerable to adversarial examples. Thus, understanding adversarial attacks can better respond to emergency situations. In order to improve attack performance, many style-transfer-based attacks and patch-based attacks have been proposed. However, the global perturbation of the former will bring unnatural global colors, while the latter is difficult to achieve success in targeted attacks due to the limited perturbation space. Moreover, compared to a plethora of methods targeting image classifiers, video adversarial attacks remain relatively underexplored. Therefore, to generate adversarial examples with a low budget and to provide them with a higher verisimilitude, we propose a novel black-box video attack framework, called Stylized Logo Attack (SLA). SLA is conducted through three stages. The first stage involves building a style reference set for logos, which can not only make the generated examples more natural, but also carry more target class features in targeted attacks. Then, Reinforcement Learning is employed to determine the style reference and position parameters of the logo within the video, which ensures that the stylized logo is placed in the video with optimal attributes. Finally, perturbations are optimized in a step-by-step manner so as to improve the fooling rate. Experimental results indicate that SLA can achieve better performance than state-of-the-art methods and still maintain good deception effects when facing various defense methods. We believe SLA can raise awareness among the security community about the reliability and security of video classification systems and serve as a memorandum of possible attack methods.

08.
arXiv (CS.AI) 2026-06-12

DailyReport: An Open-ended Benchmark for Evaluating Search Agents on Daily Search Tasks

arXiv:2606.12871v1 Announce Type: new Abstract: Search Agents (SAs) typically leverage large language models (LLMs) to support complex information-seeking tasks by autonomously exploring web sources and synthesizing information into comprehensive responses. For SAs evaluation, prior benchmarks mainly focus on specialized tasks that are unlikely to arise in real-world user scenarios. Moreover, their reliance on coarse task-level rubrics often limits evaluation interpretability. To bridge this gap, we introduce DailyReport, an open-ended benchmark to evaluate SA capabilities on daily search tasks. It contains 150 open-ended tasks with 3,546 associated rubrics, capturing widely discussed and timely information demands of real-world users. Each task is decomposed into subtasks and evaluated with cascade rubrics across disentangled dimensions. Through cascade performance attribution and user-centric aggregation, we derive highly interpretable scores for each dimension, along with a user preference score. Our results on 17 agentic systems show that current systems still fall short of users' expectations. To facilitate future research, our dataset and code are made publicly available at https://github.com/AGI-Eval-Official/DailyReport.

09.
arXiv (CS.CV) 2026-06-11

TopoCap: Learning Topology-Agnostic Motion Priors for Monocular Video-to-Animation

The explosion of generative 3D assets has created a massive demand for animation, yet current motion capture methods remain brittle, restricted to species-specific templates (e.g., SMPL) or requiring labor-intensive manual rigging. We introduce TopoCap, the first unified framework capable of extracting motion from monocular video and retargeting it onto characters with arbitrary, unseen skeletal topologies, i.e., from bipeds to hexapods and inanimate objects, without test-time optimization. Our key insight is that while skeletal structures are combinatorial and discrete, the underlying physics of motion occupy a continuous, low-dimensional manifold. We materialize this insight via a two-stage generative pipeline. First, we learn a Universal Motion Manifold using a Graph CVAE that compresses heterogeneous kinematic chains into a shared, fixed-length latent code. By explicitly conditioning the decoder on a structural embedding of the target rig, we disentangle motion dynamics from skeletal topology. Second, we treat video-to-animation as a conditional flow matching problem, predicting these topology-agnostic codes from visual features. To learn this generalized prior, we introduce Mobjaverse, a massive-scale dataset curated from Objaverse-XL. Comprising over 5,000 unique skeletal topologies and 2 million frames, it exceeds the structural diversity of existing datasets by two orders of magnitude. Extensive experiments demonstrate that \MethodMotion outperforms specialist models on human and quadruped benchmarks while enabling zero-shot retargeting for the long tail of 3D creatures. Dataset is publicly available at https://huggingface.co/datasets/duckduckplz/Mobjaverse.

10.
arXiv (CS.LG) 2026-06-17

Public transit gains and spatially uneven travel demand changes after NYC congestion pricing

arXiv:2606.17530v1 Announce Type: cross Abstract: New York City implemented the nation's first cordon-based congestion pricing program in January 2025, providing an opportunity to evaluate how system-wide urban mobility responds to large-scale pricing interventions. Because such policies generate spillovers across modes and locations, credible control groups are difficult to construct. We address this challenge using time series foundation models to generate probabilistic counterfactual demand forecasts with calibrated uncertainty. Applying this framework to bus, subway, and aggregate trip volume data, we find that post-policy bus and subway ridership increased significantly relative to expected no-policy demand, while overall travel demand decreased modestly. The effects are spatially heterogeneous: while reductions in overall travel demand are concentrated within the Congestion Relief Zone, transit gains extend beyond Manhattan's core. Socio-demographic analyses further reveal uneven adaptation across neighborhoods, highlighting spatial equity implications. Our framework provides a scalable approach for the uncertainty-aware evaluation of system-wide urban interventions when clean control groups are unavailable.

11.
arXiv (CS.CL) 2026-06-16

Towards Advanced Mathematical Reasoning for LLMs via First-Order Logic Theorem Proving

Large language models (LLMs) have shown promising first-order logic (FOL) reasoning capabilities with applications in various areas. However, their effectiveness in complex mathematical reasoning involving multi-step FOL deductions is still under-researched. While LLMs perform competitively on established mathematical reasoning benchmarks, they struggle with multi-step FOL tasks, as demonstrated by Deepseek-Prover-V2-7B's low accuracy (4.2%) on our proposed theorem proving dataset. This issue arises from the limited exploration of diverse proof strategies and the potential for early reasoning mistakes to undermine entire proofs. To address these issues, we propose DREAM, a self-adaptive solution that enhances the Diversity and REAsonability of LLMs' generation strategies. DREAM incorporates an Axiom-Driven Strategy Diversification mechanism to promote varied strategic outcomes and a Sub-Proposition Error Feedback to help LLMs reflect on and correct their proofs. Our contributions include pioneering advancements in LLMs' mathematical reasoning through FOL theorem proving, introducing a novel inference stage solution that improves performance by 0.6% to 6.4%, and providing a curated dataset of 447 mathematical theorems in Lean 4 format for evaluation.

12.
arXiv (CS.AI) 2026-06-17

FlowRAG: Synergizing Explicit Reasoning via Frequency-Aware Multi-Granularity Graph Flow

arXiv:2606.17856v1 Announce Type: new Abstract: Graph-based retrieval-augmented generation (GraphRAG) is effective for knowledge-intensive and multi-hop query tasks; however, many existing methods primarily seed entity-based graphs and rely on implicit semantic relevance propagation. This often (i) under-retrieves when user queries are abstract and semantically sparse at the entity level, and (ii) suffers from brittle multi-hop reasoning, where noisy activations can derail entity-to-entity transitions and corrupt the inferred relation chain, yielding unreliable conclusions. To this end, we propose \texttt{FlowRAG}, a semantic-aware retrieval framework that improves both semantic recall and explicit reasoning. Specifically, \texttt{FlowRAG} constructs a quad-level heterogeneous graph over passages, summaries, sentences, and entities, where summary nodes serve as a coarse semantic hub. At retrieval time, a dual-granularity activation module combines summary–query alignment with sentence-level matching to activate relevant entities under paraphrase and abstraction robustly. We then introduce a frequency-aware weighted flow module that routes relevance through entity–passage links weighted by within-passage term frequency, pruning noisy connections and extracting high-confidence reasoning paths as an explicit logic skeleton for generation. Extensive experiments show that \texttt{FlowRAG} obtains state-of-the-art performance on complex reasoning benchmarks.

13.
arXiv (CS.CL) 2026-06-16

Retrievable Gradients: Continual Post-Training Without Cumulative Weight Drift

Continual post-training enables models to absorb emerging knowledge after deployment, but repeatedly updating shared parameters can accumulate weight drift, potentially causing catastrophic forgetting and degrading general capabilities. Retrieval-augmented generation avoids such parameter drift, yet often lacks the depth of parametric knowledge integration. In this paper, we propose ReGrad (Retrievable Gradients), a new paradigm that treats gradients as retrievable units of knowledge. ReGrad pre-computes document-specific gradients offline, stores them in an indexed Gradient Bank, and retrieves only query-relevant gradients at inference time for temporary weight adaptation. However, raw language-modeling gradients are optimized for token-level document reconstruction rather than for query-driven knowledge use. We therefore introduce a bi-level meta-learning objective that reshapes document-derived gradients into generalizable adaptation signals for downstream tasks. Experiments across general and domain-specific settings show that \textsc{ReGrad} outperforms CPT and RAG baselines, enabling scalable and reversible parametric knowledge injection without accumulating weight drift.

14.
arXiv (CS.CV) 2026-06-18

GUMP-Net: An interpretable model-data-driven intelligent algorithm for multi-class pelvic segmentation

Pelvic segmentation is one of the most important and fundamental research problems in precise and intelligent diagnosis and treatment, as well as surgical planning and navigation for pelvic fractures. By combining an improved geodesic active contour model with deep neural networks, we propose GUMP-Net, an interpretable model-data-driven intelligent algorithm for multi-class pelvic segmentation, in which three network modules are designed to constitute the overall segmentation framework together: the object detection module for automatic level set initialization, the edge detector module for learning an anatomy-aware edge detector function and the iteration module for deep level set evolution. Leveraging the advantages of level set representation and deep learning, GUMP-Net shows more accurate, robust and consistent segmentation performance, especially in small training data situation, compared to the state-of-the-art methods. Extensive experiments on pelvic datasets demonstrate the rationality and effectiveness of the proposed algorithm. Further experiments extended to ankle dataset indicate broader applications to other anatomies. The proposed algorithm not only provides an efficient segmentation method for complex fracture reduction, but also gives an interpretable geometric perspective for understanding deep learning segmentation.

15.
arXiv (CS.CL) 2026-06-16

Beyond Retrieval: Learning Compact User Representations for Scalable LLM Personalization

Personalizing large language models requires adapting model behavior to individual users while preserving robustness and deployment-scale efficiency. Existing approaches typically personalize LLMs either at the input level, by retrieving user histories or constructing profile prompts, or at the parameter level, by maintaining user-specific parameter-efficient modules. The former makes personalization sensitive to retrieval quality and prompt design, whereas the latter incurs storage and maintenance costs that grow with the user population. To address these limitations, we propose TAP-PER (Temporal Attentive Prefix for PERsonalization), a prefix-based framework that encodes user preferences as learnable representations, eliminating explicit prompt construction and replacing heavy per-user adapters with lightweight user-state prefix embeddings. Inspired by personalized recommendation systems, TAP-PER decomposes user modeling into user-state and query-conditioned components, and incorporates temporal signals to capture the evolving nature of user interests. Experiments on six LaMP tasks show that TAP-PER consistently outperforms prompt-based and model-based baselines across classification, rating, and generation settings. Moreover, TAP-PER uses 130x fewer per-user parameters than OPPU and roughly half the total parameter footprint of PER-PCS at the 1,000-user scale, demonstrating that scalable LLM personalization can be achieved without explicit prompt construction or heavy per-user adapters.

16.
arXiv (CS.AI) 2026-06-11

Human-Enhanced Loop Modeling (HELM): Agent-Based Finite Element Modeling of Concrete Bridge Barriers

arXiv:2606.12025v1 Announce Type: new Abstract: Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.

17.
arXiv (CS.AI) 2026-06-11

A Survey of Reasoning and Agentic Systems in Time Series with Large Language Models

arXiv:2509.11575v3 Announce Type: replace Abstract: Time series reasoning treats time as a first-class axis and incorporates intermediate evidence directly into the answer. This survey defines the problem and organizes the literature by reasoning topology with three families: direct reasoning in one step, linear chain reasoning with explicit intermediates, and branch-structured reasoning that explores, revises, and aggregates. The topology is crossed with the main objectives of the field, including traditional time series analysis, explanation and understanding, causal inference and decision making, and time series generation, while a compact tag set spans these axes and captures decomposition and verification, ensembling, tool use, knowledge access, multimodality, agent loops, and LLM alignment regimes. Methods and systems are reviewed across domains, showing what each topology enables and where it breaks down in faithfulness or robustness, along with curated datasets, benchmarks, and resources that support study and deployment (https://github.com/blacksnail789521/Time-Series-Reasoning-Survey). Evaluation practices that keep evidence visible and temporally aligned are highlighted, and guidance is distilled on matching topology to uncertainty, grounding with observable artifacts, planning for shift and streaming, and treating cost and latency as design budgets. We emphasize that reasoning structures must balance capacity for grounding and self-correction against computational cost and reproducibility, while future progress will likely depend on benchmarks that tie reasoning quality to utility and on closed-loop testbeds that trade off cost and risk under shift-aware, streaming, and long-horizon settings. Taken together, these directions mark a shift from narrow accuracy toward reliability at scale, enabling systems that not only analyze but also understand, explain, and act on dynamic worlds with traceable evidence and credible outcomes.

18.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

19.
arXiv (CS.CV) 2026-06-17

Looped World Models

Current world models face a fundamental tension: faithful long-horizon simulation demands deep computation, but deeper models are expensive to deploy and prone to compounding errors. We resolve this by introducing Looped World Models (LoopWM), which are the first looped architectures for world modelling. Our method iteratively refines latent environment states through a parameter-shared transformer block. This yield up to 100x parameter efficiency over conventional approaches with adaptive computation that automatically scales depth to match the complexity of each prediction step. Orthogonal to scaling model size and training data, LoopWM establishes iterative latent depth as a new scaling axis for world simulation, which might significantly push the community forward.

20.
arXiv (CS.CV) 2026-06-19

EventVLA: Event-Driven Visual Evidence Memory for Long-Horizon Vision-Language-Action Policies

Memory remains a critical bottleneck for long-horizon robotic manipulation, as standard Vision-Language-Action (VLA) policies often fail when task-relevant cues become occluded or unobservable over time. While existing memory-augmented methods utilize historical context, they either suffer from severe information bottlenecks, incur high latency via decoupled dual systems, or rely on unselective buffers that accumulate massive visual redundancies. To address these limitations, we introduce EventVLA, an end-to-end framework founded on the concept of sparse visual evidence memory that comprises two core components: foundational visual anchors to retain initial and short-term contexts, and a dynamic Keyframe Evidence Memory (KEM) module. Specifically, KEM directly predicts future keyframe probabilities from the VLA's latent embeddings to autonomously capture and store sparse, task-critical visual events. This foresight-driven mechanism empowers the policy to dynamically evaluate the future causal utility of current observations, preserving transient visual evidence before it becomes unobservable. Furthermore, we propose RoboTwin-MeM, a diagnostic benchmark specifically designed to evaluate non-Markovian manipulation tasks with interactive visual evidence. Extensive evaluations show that across 17 memory-requiring simulation tasks and 4 real-world bimanual tasks, EventVLA achieves an average success rate improvement of +40% over state-of-the-art memory-augmented VLAs.

21.
arXiv (CS.LG) 2026-06-12

Towards One-for-All Anomaly Detection for Tabular Data

arXiv:2603.14407v2 Announce Type: replace Abstract: Tabular anomaly detection (TAD) aims to identify samples that deviate from the majority in tabular data and is critical in many real-world applications. However, existing methods follow a ``one model for one dataset (OFO)'' paradigm, which relies on dataset-specific training and thus incurs high computational cost and yields limited generalization to unseen domains. To address these limitations, we propose OFA-TAD, a generalist one-for-all (OFA) TAD framework that only requires one-time training on multiple source datasets and can generalize to unseen datasets from diverse domains on-the-fly. To realize one-for-all tabular anomaly detection, OFA-TAD extracts neighbor-distance patterns as transferable cues, and introduces multi-view neighbor-distance representations from multiple transformation-induced metric spaces to mitigate the transformation sensitivity of distance profiles. To adaptively combine multi-view distance evidence, a Mixture-of-Experts (MoE) scoring network is employed for view-specific anomaly scoring and entropy-regularized gated fusion, with a multi-strategy anomaly synthesis mechanism to support training under the one-class constraint. Extensive experiments on 34 datasets from 14 domains demonstrate that OFA-TAD achieves superior anomaly detection performance and strong cross-domain generalizability under the strict OFA setting. The source code is available at https://github.com/Shiy-Li/OFA-TAD.

22.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

23.
arXiv (CS.AI) 2026-06-12

Benchmarking AI Agents for Addressing Scientific Challenges Across Scales

arXiv:2606.12736v1 Announce Type: new Abstract: AI agents are increasingly being developed to accelerate scientific discovery, yet their practical capabilities in real research settings remain poorly understood. Existing benchmarks for AI agents rarely capture the complexity, heterogeneity, and extended reasoning required by scientific work, whereas benchmarks for scientific tasks often reduce research to static, direct problems and provide limited support for interactive evaluation. Here, we introduce SciAgentArena, a systematic benchmark for evaluating AI agents in real-world scientific research scenarios drawn from emerging needs across multiple domains. SciAgentArena comprises approximately 200 tasks with stepwise verification and an interactive, agent-agnostic environment for assessing diverse AI agents. Using this benchmark, we find that current agents can contribute effectively to well-specified data-analysis workflows, particularly when the task structure and evaluation criteria are clear. However, their performance remains uneven across scientific contexts: agents struggle to generate genuinely novel insights, sustain self-directed exploration, and formulate robust solutions for open-ended research questions. We further characterize common failure modes across agents and identify opportunities for improving their reliability, autonomy, and scientific reasoning. Together, SciAgentArena provides a practical framework for measuring progress in AI agents for science and for guiding the design of future agents capable of addressing complex scientific challenges. Full codes, tasks, and datasets can be accessed via this link: https://sciagentarena.github.io/.

24.
arXiv (CS.AI) 2026-06-12

Agents-K1: Towards Agent-native Knowledge Orchestration

arXiv:2606.13669v1 Announce Type: new Abstract: Current LLM-based research agents have advanced through agent orchestration, yet largely overlook scientific knowledge orchestration. Existing works often reduce papers to abstracts, surface mentions, and flat \texttt{cites} edges, omitting key entities, claims, evidence, mechanisms, and method lineages essential for scientific reasoning. To this end, we introduce Agents-K1, an end-to-end knowledge orchestration pipeline that converts raw documents into agent-native scientific knowledge graphs. Agents-K1 integrates three components under a unifying theoretical foundation: a multimodal parser whose five-module schema captures entities, multimodal evidence, citations, and typed inter-entity relations across the full paper rather than abstracts alone; a 4B information-extraction backbone trained with GRPO under a rule-based reward; and a graphanything CLI, a tri-source agent interface that unifies web search, multimodal graph retrieval, and cross-document traversal. On top of this, we process 2.46 million scientific papers across six subjects to produce Scholar-KG, of which we release a one-million-paper subset, and the full Scholar-KG is accessible via the SCP link below. The same pipeline can be extended to general-domain corpora and to schema-conformant data synthesis. Extensive experiments demonstrate that Agents-K1 achieves superior performance in scientific information extraction, knowledge graph construction, and multi-hop scientific reasoning.

25.
arXiv (CS.LG) 2026-06-16

BRICKS-WM: Building Reusability via Interface Composition Kinetics for Structured World Models

arXiv:2606.16489v1 Announce Type: new Abstract: Model-based Reinforcement Learning (MBRL) has achieved remarkable success in continuous control by leveraging latent world models. However, prevailing approaches typically rely on monolithic latent dynamics, entangling environment dynamics into a coupled process. This coupling severely limits reusability: altering the agent necessitates retraining the entire world from scratch, even if the environment remains constant. To address this, we introduce BRICKS-WM (Building Reusability via Interface Composition Kinetics for Structured World Models), a framework for the modular assembly of structured world models. Driven by the insight that the physical world is composed of independent entities, we posit that global dynamics can be modeled as a composition of distinct dynamical modules interacting via latent interfaces. As a minimal instantiation, we factorize the latent state space into an actuated Agent module and an external Background module, bridged by a learned latent interface. Unlike prior object-centric methods that prioritize visual segmentation, BRICKS-WM enforces a functional separation in transition dynamics, ensuring that background dynamics remains agnostic to the agent's dynamics. Empirically, BRICKS-WM achieves control performance comparable to strong monolithic baselines when trained from scratch, and enables the reuse of frozen background dynamics across agents.