×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Hang Yang ×
换一批
01.
arXiv (CS.CV) 2026-06-16

Qwen-RobotWorld Technical Report: Unifying Embodied World Modeling through Language-Conditioned Video Generation

We introduce Qwen-RobotWorld, a language-conditioned video world model for embodied intelligence. With natural language as a unified action interface, it predicts physically grounded future visual trajectories from current observations across robotic manipulation, autonomous driving, indoor navigation, and human-to-robot transfer. This unified formulation provides three promising application directions: synthetic data generation for policy training augmentation, scalable virtual environments for policy evaluation, and language-guided planning signals for downstream robot control. This is achieved through a three-part design: a) Double-Stream MMDiT with MLLM Action Encoding, where a 60-layer double-stream diffusion transformer couples frozen Qwen2.5-VL semantics with video-VAE latents through layer-wise joint attention; b) Embodied World Knowledge (EWK), an 8.6M video-text corpus (200M+ frames) with action-language mapping over 20+ embodiments and 500+ action categories; and c) General+Expert Progressive Curriculum, a two-stage training strategy that first learns general visual priors and then injects embodied specialization under a shared language interface. Extensive results show strong competitiveness: ranks 1st overall on EWMBench and DreamGen Bench, outperforms all open-source models on WorldModelBench and PBench. Additional zero-shot analyses on RoboTwin-IF benchmark further support robust generalization and multi-view consistency.

02.
arXiv (CS.AI) 2026-06-16

CIWI-CKT: Chaos-Informed Wave Interference Feature Fusion and Cross-City Knowledge Transfer for Traffic Flow Forecasting

arXiv:2606.15642v1 Announce Type: cross Abstract: Accurate traffic flow prediction remains challenging in cross-city, data-scarce scenarios where limited historical data hinders model generalisation. The chaotic nature of traffic dynamics, complex spatio-temporal dependencies, and heterogeneous urban networks complicate few-shot learning across cities. Existing deep learning approaches either treat traffic as purely deterministic or lack mechanisms to model wave-like interference patterns essential for cross-regime traffic dynamics. To address these limitations, this paper proposes CIWI-CKT, a novel Chaos-Informed Wave Interference Feature Fusion framework with Cross-City Knowledge Transfer. Our framework introduces three core innovations: chaos-informed wave generation that extracts measurable chaos invariants and models traffic as adaptive wave components; meta-interference processing that captures wave interactions between support and query regimes while producing a predictability score for confidence estimation; and chaos-aware meta-learning that enables efficient cross-city knowledge transfer while preserving chaotic characteristics. We establish theoretical guarantees including chaos-to-wave stability, wave-induced dimension reduction, and meta-learning generalisation bounds. Extensive experiments on four real-world traffic datasets demonstrate that CIWI-CKT significantly outperforms state-of-the-art spatio-temporal graph learning, transfer learning, prompt-based, and few-shot methods, improving prediction accuracy while substantially reducing required training data.

03.
arXiv (CS.CV) 2026-06-16

CoIRL-AD: Collaborative-Competitive Imitation-Reinforcement Learning in Latent World Models for Autonomous Driving

End-to-end autonomous driving models trained with imitation learning (IL) often generalize poorly, particularly in long-tail scenarios where expert demonstrations are sparse. Reinforcement learning (RL) can provide complementary task-level supervision, but applying RL to real-world autonomous driving is challenging in offline settings without interactive simulators, where datasets are dominated by expert actions and provide limited behavioral diversity. We propose CoIRL-AD, a competitive dual-policy framework that integrates IL and RL under a unified offline training regime. CoIRL-AD decouples imitation and reward optimization into separate actors to alleviate objective conflicts, uses imagined future rollouts for long-horizon reward estimation, and introduces a competition mechanism that selectively transfers beneficial behaviors while keeping RL anchored to expert-like driving. Experiments on the nuScenes benchmark show that CoIRL-AD consistently improves robustness over strong IL-based baselines, with especially large gains in cross-city generalization and long-tail scenarios. Code is available at: https://github.com/SEU-zxj/CoIRL-AD.

04.
arXiv (CS.CV) 2026-06-16

Structure-aware Knowledge-guided Heterogeneous Mamba for Zygomaticomaxillary Suture Assessment

The Zygomaticomaxillary Suture is a key circummaxillary structure that connects the zygomatic bone and the maxilla, which serves as a primary site of resistance during maxillary advancement, and its maturation status directly influences the timing and efficacy of orthopedic interventions. However, accurate staging of ZMS maturation remains challenging due to subtle high-frequency transitions in suture lines and the global semantic ambiguity between adjacent stages. To address this, we present the first public ZMS dataset, comprising 3,790 ZMS images covering the entire age range from 4 to 24 years. Based on this dataset, we propose SKMamba, a Structure-aware and Knowledge-guided Mamba-based multi-modal framework for automated ZMS maturation assessment. SKMamba adopts a decoupled dual-path architecture that mimics the hierarchical diagnostic process used by experienced orthodontists. We first introduce an Implicit Edge Extractor (IEE), which leverages structural pre-training to reduce trabecular noise and accentuate sutural boundaries. Complementarily, a Cross-Modal Semantic Alignment (CSA) module is designed to incorporate anatomical descriptions from a large language model (LLM). This module helps align local morphological cues with global semantic descriptions while ensuring that objective morphological evidence remains the primary basis for decisions. Extensive experiments on our ZMS dataset demonstrate that SKMamba achieves state-of-the-art performance compared to existing methods. Code is available at https://github.com/galaxygxq1116/SKMamba.

05.
arXiv (quant-ph) 2026-06-17

Probing PbTe-Pb nanowire devices with radio-frequency reflectometry

arXiv:2606.04544v2 Announce Type: replace-cross Abstract: We report the implementation of radio-frequency (rf) reflectometry on selective-area-grown PbTe-Pb nanowire devices on a CdTe substrate. These nanowires are predicted to host Majorana zero modes. We demonstrate the compatibility of the rf technique, including both resistive and capacitive sensing, with these nanowires. The effect of dielectric loss from the CdTe substrate is quantitatively characterized. Furthermore, the feasibility of rf reflectometry is verified under finite magnetic fields where zero-energy modes can emerge. Our results establish the fast control of PbTe quantum devices, paving the way for their applications in topological quantum computation.

06.
arXiv (CS.CV) 2026-06-16

Sinkhorn-CPD: Robust point cloud registration via unbalanced entropic optimal transport

Coherent Point Drift (CPD) is widely used for rigid point cloud registration because of its soft correspondences and closed-form parameter updates. However, CPD's target-side marginal constraint forces every observation, including outliers, to receive exactly unit probability mass. This assumption degrades registration accuracy under heavy outliers and partial overlap. Optimal transport (OT) methods can handle missing mass through unbalanced formulations, but require hand-tuned annealing schedules. In this paper, we propose Sinkhorn-CPD, which replaces CPD's target-side marginal constraint with dual Kullback-Leibler penalties, allowing the algorithm to discard outliers on both sides. The resulting formulation is a fully unbalanced entropic optimal transport problem, which can be efficiently solved by generalized Sinkhorn iterations. Moreover, Sinkhorn-CPD preserves the closed-form Procrustes and variance updates of CPD. In our method, the variance sigma^2 plays the role of the entropic regularization parameter, which induces an automatic annealing schedule from diffuse to sharp correspondences without manual temperature tuning. Experiments on synthetic, cross-category, and scan-to-CAD benchmarks show that Sinkhorn-CPD achieves state-of-the-art accuracy, with strong robustness to outliers and partial overlap.

07.
arXiv (CS.LG) 2026-06-11

Machine-learning-based multipoint optimization of fluidic injection parameters for improving nozzle performance

arXiv:2409.12707v2 Announce Type: replace-cross Abstract: Fluidic injection offers a promising solution to improve the performance of the overexpanded single expansion ramp nozzles (SERNs) during vehicle acceleration. However, determining the injection parameters that yield the best overall performance across multiple nozzle operating conditions remains a challenge. The gradient-based optimization method requires gradients of injection parameters at each design point, which can lead to high computational costs when using computational fluid dynamics (CFD) simulations. This paper uses a pretrained neural network to replace CFD during optimization, enabling quick calculation of the nozzle flow field at multiple design points. Considering the physical characteristics of the nozzle flow field, a prior-based prediction strategy is adopted to enhance the model's accuracy. In addition, the neural network's back-propagation algorithm computes gradients quickly by running the computation only once, thereby greatly reducing gradient computation time compared to the finite difference method. As a test case, the average nozzle thrust coefficient of an SERN at seven design points is optimized, resulting in a 1.14\% improvement. The time cost is greatly reduced compared with traditional optimization methods, even when the time required to establish the training database is included.

08.
arXiv (CS.LG) 2026-06-18

Learning from Your Own Mistakes: Constructing Learnable Micro-Reflective Trajectories for Self-Distillation

arXiv:2606.18844v1 Announce Type: new Abstract: Self-distillation improves reasoning in large language models by using the model's own rollouts as training signal, typically through implicit logit-level alignment that minimizes KL divergence toward a privileged target distribution. However, because this supervision is generated via uncontrolled sampling, it provides no diagnostic insight into the model's specific errors or corrective guidance for its individual failure patterns. Consequently, the model learns to imitate a privileged distribution rather than receiving fine-grained corrections that pinpoint where and why its reasoning fails. In this paper, we propose Trajectory-Augmented Policy Optimization (TAPO), which advances self-distillation from implicit distributional alignment to explicit trajectory construction. During RL training, the model produces both correct and incorrect rollouts to the same query, and TAPO leverages this contrastive structure to construct micro-reflective corrections, new training trajectories that retain the model's erroneous reasoning up to the point of failure, then insert a natural-language diagnosis and corrected reasoning guided by a correct reference from the same sampling group. Since each trajectory is anchored in the learner's own prefix and solutions, the corrective signal preserves the model's on-policy distribution to a greater extent than the position-wise alignment imposed by KL-based methods. To integrate these trajectories, TAPO introduces difficulty-aware candidate selection at the model's capability boundary and decoupled advantage estimation to prevent gradient contamination. Experiments on AIME 2024, AIME 2025, and HMMT 2025 show that TAPO achieves consistent improvements over GRPO under the same number of training steps. Further analysis demonstrates that TAPO strengthens both first-pass reasoning and error-correction effectiveness.

09.
arXiv (CS.LG) 2026-06-16

Conflict-Aware Federated Fine-Tuning of Large Language Models with Mixture-of-Experts

arXiv:2606.15625v1 Announce Type: new Abstract: The continuous scaling of large language models (LLMs) incurs prohibitive computational costs, making Mixture-of-Experts (MoE) a scalable alternative for efficient fine-tuning via sparse activation. While federated learning (FL) emerges as the paradigm for privacy-preserving collaborative optimization, integrating MoE into FL under data heterogeneity may trigger conflicting expert optimizations. Client-specific data distributions force same-indexed experts to optimize under inconsistent or even conflicting feature-label correlations. This mismatch induces destructive interference during aggregation, thus destabilizing the optimization trajectory and degrading model performance. To address this issue, we propose FC-MoE, a federated conflict-aware framework for MoE fine-tuning. It employs an importance aware weighting scheme to prioritize reliable local updates and utilizes gradient consensus projection to suppress conflicting updates, ensuring a stable global optimization path. Moreover, a local knowledge retention mechanism further preserves specialized client expertise by re-anchoring domain-specific residuals. Extensive experiments demonstrate that FC-MoE accelerates convergence and enhances both global and local model performance in non-IID federated environments.

10.
arXiv (CS.CL) 2026-06-16

SING: Synthetic Intention Graph for Scalable Active Tool Discovery in LLM Agents

Large language model (LLM) agents increasingly rely on agent harnesses that manage context, tools, and multi-turn execution, making tools a central interface for acting in realistic digital environments. As harness-connected tool ecosystems expand to hundreds or thousands of APIs, services, and task-specific skills, exhaustive tool schema injection becomes costly and imposes a closed-world assumption that limits agents to a predefined static inventory. Retrieval-augmented tool selection offers a natural alternative, but existing one-shot retrieval methods often fail to align isolated tool descriptions with the agent's true task intention, especially in long-horizon tasks where required capabilities emerge through decomposition, observations, and newly induced subgoals. We propose SING, an intention-aware active tool discovery framework that builds an intention-tool graph linking user intentions, tool capabilities, and tool collaboration patterns, and dynamically retrieves tools according to evolving task states. Using a unified corpus of 7,471 tools, we evaluate SING on three real-world tool-use benchmarks. SING improves Global Recall@5 by up to 59.8% and downstream success rate by up to 28.9% over baselines, while reducing full-corpus tool-schema exposure by 99.8%, demonstrating that intention-aware graph structure enables more accurate and context-efficient tool discovery in large-scale agentic ecosystems.

11.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

12.
arXiv (CS.CV) 2026-06-16

Rotational Symmetry based Object Pose Estimation from Point Clouds in the Absence of Known 3D Models

Object pose estimation is crucial to many industrial applications, with one example being automated spray painting using a robot. However, confidentiality concerns often limit access to high-quality 3D models, posing a significant challenge for point-cloud-based pose estimation. In such scenarios, rotational symmetry, a readily accessible characteristic of many industrial objects, can provide valuable prior information to facilitate pose estimation.In this paper, we propose a method that leverages the rotational symmetry commonly found in industrial objects to address the challenge caused by the absence of 3D models. The object pose is jointly estimated with point cloud refinement through an iterative optimization process. This optimization relies on a rotational symmetry constraint loss. To construct this loss, each 3D point is rotated according to the currently estimated pose, and multiple correspondences are identified using nearest-neighbor search by exploiting the rotational symmetry property. These correspondences are then used to compute the rotational symmetry constraint loss, which iteratively refines both the pose and the point cloud.By explicitly incorporating rotational symmetry into the optimization process, the proposed method achieves robust pose estimation and generalizes well across diverse object types. The proposed method is evaluated on a dataset specifically created for point clouds without known 3D models, consisting of four categories of synthetic objects and one real wheel hub collected from a production line. Experimental results demonstrate that the proposed method achieves performance comparable to methods that rely on known 3D models.

13.
arXiv (CS.AI) 2026-06-11

Embodied-R1.5: Evolving Physical Intelligence via Embodied Foundation Models

arXiv:2606.11324v1 Announce Type: cross Abstract: We introduce Embodied-R1.5, a unified Embodied Foundation Model (EFM) that integrates comprehensive embodied reasoning capabilities, spanning embodied cognition, task planning, correction, and pointing, within a single architecture toward general physical intelligence. Leveraging three automated data construction pipelines to significantly expand the data coverage of critical capabilities, we build a large-scale data system of over 15B tokens, and design a multi-task balanced RL recipe to alleviate heterogeneous task conflicts. We further introduce a Planner-Grounder-Corrector (PGC) closed-loop framework that enables a single model to autonomously execute and self-correct over long-horizon tasks. With only 8B parameters, Embodied-R1.5 achieves SOTA on 16 out of 24 embodied VLM benchmarks, surpassing leading models like Gemini-Robotics-ER-1.5 and GPT-5.4. Benefiting from the internalized embodied capabilities, Embodied-R1.5 can be fine-tuned into a VLA with only a small amount of data, outperforming leading VLA models like $\pi_{0.5}$ across 4 popular manipulation benchmark suites. We further conduct extensive zero-shot real-robot experiments, validating performance in instruction following, affordance grounding, articulated object manipulation, and long-horizon complex tasks, demonstrating strong generalization to the physical world. We open-source model weights, datasets, training code, and EmbodiedEvalKit, an evaluation framework tailored for embodied tasks, to facilitate future research in EFMs.

14.
arXiv (CS.CL) 2026-06-11

GrowLoop: Self-Evolving Conversation Evaluation Seeded by Human

With the rapid advancement of large language models, evaluating human-likeness in open-ended conversation has become increasingly important. However, human-likeness is a form of tacit knowledge that humans perceive intuitively, yet the underlying criteria resist explicit formulation. Human judgments vary widely, with strong agreement on some cases and legitimate disagreement on others. Meanwhile, the criteria behind human judgments remain implicit, leaving no clear basis for constructing cases. Further, what counts as human-likeness is not static, but evolving with model capability and human expectations. Despite progress in evaluation methods such as expert-authored benchmarks, Reward Models, and self-evolving benchmarks, none addresses all three challenges simultaneously. Therefore, we propose GrowLoop, a self-evolving conversation evaluation system that continuously adapts as models advance and scenarios shift. Starting from minimal human seed annotations, LLM agents iteratively extract and refine evaluation rubrics through Heuristic Learning. Human-AI agreement is required where annotators converge, while only plausibility is expected where they diverge. Moreover, the Rubric-Case co-evolution mechanism enables continuous evolution. When the evaluation target shifts, new human seeds expand the system's coverage accordingly. When applied to human-likeness evaluation in open-ended conversation, the AI judge guided by these rubrics not only substantially outperforms existing methods in alignment with human judgments, but also uncovers issues that annotators overlook. The resulting benchmark effectively discriminates models across capability tiers and reveals where they fall short, while generalizing to new scenarios and adapting as models advance. Our work shifts the benchmarking paradigm from manual updates or difficulty scaling to comprehensive, continuous self-evolution.

15.
arXiv (CS.AI) 2026-06-16

When Agent Automation Becomes Profitable: Quantifying and Insuring Autonomous AI Risk through Trace-Economic Underwriting

arXiv:2606.16465v1 Announce Type: new Abstract: AI agents can now take irreversible actions in operational systems, but agent-caused losses are still not clearly assigned, priced, or transferred. Providers often disclaim consequential damages, users are left with uncompensated losses, and default human review limits the efficiency gains of automation. We ask when autonomous AI deployment can become economically acceptable despite failure risk. Our answer is to quantify risk at the customer-task-trace episode level and transfer it through insurance. Automation is acceptable when its expected benefit exceeds the premium, control cost, and remaining risk. This requires a defined role with bounded permissions and comparable traces. We introduce trace-economic underwriting, which maps tool-use traces to customer exposure and claimable loss, then uses this representation for pricing, control, and risk transfer. It uses deterministic economic labels rather than an LLM judge. In our trace-to-loss testbed, trace-economic pricing reduces pricing MAE from $17.7K to $569 and removes regressive cross-subsidy. A 300-trace expert audit accepts 295 labels unchanged. On 1,000 real SWE-smith traces, trace-conditioned controls reduce CVaR95 by 72%. Theorem~1 gives a finite-sample scope condition. We release code, labels, and audit sheets.

16.
arXiv (CS.CV) 2026-06-15

Pix2Fact: When Vision Is Not Enough – Benchmarking Fine-Grained VQA with Web Verification on High-Resolution Real-World Scenes

Despite progress on general tasks, vision-language models (VLMs) still struggle with challenges that demand both fine-grained visual grounding and external knowledge, a synergy overlooked by existing benchmarks that evaluate these abilities in isolation. To fill this void, we introduce Pix2Fact, a visual question-answering benchmark designed to assess expert-level visual perception and knowledge search. Pix2Fact comprises 1,000 high-resolution (4K+) images spanning eight scenarios. Its questions and answers are meticulously crafted by PhD-holding annotators from top global universities across diverse disciplines. Each question requires detailed visual grounding and the integration of external knowledge. Evaluating ten state-of-the-art VLMs, including proprietary models such as Gemini-3.1-Pro and GPT-5.4, we find that Pix2Fact poses a formidable challenge: the most advanced model (Gemini-3.1-Pro) achieves only 51.7% average accuracy, even with access to visual ground truth and search tools. Our analysis attributes this low accuracy to three factors, frequent visual grounding errors even with visual ground truth, shallow search harnessing, and VLM's inability to retrieve long-tail, unstructured local information. This striking gap exposes the limitations of current models in assisting humans with real-world scenarios that demand overwhelming visual comprehension. We believe Pix2Fact will serve as a critical benchmark to drive the next generation of language-vision agents that seamlessly integrate fine-grained perception with robust knowledge search.

17.
arXiv (CS.AI) 2026-06-11

Embodied-BenchClaw: An Autonomous Multi-Agent System for Embodied Spatial Intelligence Benchmark Construction

arXiv:2606.11909v1 Announce Type: new Abstract: Benchmarks are essential for evaluating embodied spatial intelligence, yet their construction is labor-intensive, hard to reuse, and difficult to maintain. Existing embodied benchmarks are often static and may quickly become saturated as models improve, limiting their ability to distinguish new capabilities. We propose Embodied-BenchClaw, an autonomous agentic system for constructing embodied spatial intelligence benchmarks. Given a user-specified evaluation intent, Embodied-BenchClaw automatically produces a complete and continually updatable benchmark package through a five-stage pipeline: intent blueprinting, data collection, structuring and cleaning, benchmark synthesis, and evaluation reporting. The pipeline is coordinated by three agents for planning, construction, and evaluation. To improve reusability and reliability, Embodied-BenchClaw introduces an extensible Skill Library and process quality control, enabling benchmark construction to be composable, verifiable, and repairable. We instantiate multiple benchmarks covering indoor spatial reasoning, outdoor spatial reasoning, robotic manipulation, quadruped robot navigation, UAV/aerial-view understanding, and static benchmark enhancement. These benchmarks span diverse embodied carriers, data sources, and spatial capabilities. Experiments with human evaluation, judge-based assessment, consistency checks, cost analysis, and ablations show that Embodied-BenchClaw can construct verifiable, executable, maintainable, and diagnostically useful embodied spatial benchmarks with reduced manual effort.

18.
arXiv (quant-ph) 2026-06-17

SPICE-Q and Large-Scale Quantum Chip Production

arXiv:2606.17907v1 Announce Type: new Abstract: We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.

19.
arXiv (CS.CV) 2026-06-17

LiveStarPro: Proactive Streaming Video Understanding with Hierarchical Memory for Long-Horizon Streams

Despite the remarkable progress of Video Large Language Models (Video-LLMs), current online architectures still struggle to simultaneously process continuous video streams, decide autonomously when to respond, and preserve long-horizon contextual memory. These obstacles undermine real-time responsiveness and cause severe forgetting throughout prolonged interactions. In this work, we introduce LiveStarPro, a live streaming assistant that is designed for proactive video understanding over long-horizon streams. The design of LiveStarPro rests on three complementary components. The first component is Streaming Verification Decoding (SVeD), an inference framework that identifies the appropriate response timing through single-pass perplexity verification, thereby eliminating the dependency on explicit silence tokens. The second component is Streaming Causal Attention Masks (SCAM), a training strategy that enforces incremental video-language alignment over variable-length streams. The third component is Tree-Structured Hierarchical Memory (TSHM), a recursive memory architecture that organizes evicted historical information into event chains and consequently enables efficient retrieval from effectively unbounded video streams. To facilitate a comprehensive evaluation under realistic online conditions, we further present OmniStarPro, a large-scale benchmark that spans 15 diverse real-world scenarios and that extends to hour-scale streams for the assessment of long-term recall. Extensive experiments demonstrate that LiveStarPro consistently surpasses existing methods, attaining a 28.9% improvement in semantic correctness and an 18.2% reduction in timing error, while its streaming key-value cache further yields a 1.58x inference speedup over the same model without caching. The model and the code are publicly available at https://github.com/sotayang/LiveStarPro.

20.
arXiv (CS.CL) 2026-06-16

PhoneHarness: Harnessing Phone-Use Agents through Mixed GUI, CLI, and Tool Actions

Phone agents are increasingly expected to complete real mobile workflows rather than merely predict the next screen action. However, much of the current mobile-agent literature still evaluates agents primarily as GUI controllers that observe a screen, emit taps and swipes, and are scored by target app state. Real phone-use tasks are broader: they require deciding when to use app GUIs, device-side commands, or structured tools, while leaving evidence that the intended side effect actually occurred. We introduce PhoneHarness, a mixed-action benchmark and execution harness for studying phone-use agents on verifiable mobile workflows. PhoneHarness runs a device-side agent loop over GUI, CLI, and host-side tool actions, combining deterministic action routing with bounded GUI delegation and auditable execution traces. Its benchmark, PhoneHarness Bench, evaluates whether agents complete tasks with observable side effects, not only whether they produce plausible final answers. On the annotated evaluation split, PhoneHarness reaches a 75.0% pass rate, outperforming the strongest non-PhoneHarness settings by 12.9 percentage points. PhoneHarness and PhoneHarness Bench therefore play distinct but mutually dependent roles: the harness makes mixed phone workflows executable, while the benchmark measures whether agents can use that harness reliably and safely. Our findings suggest that reliable phone automation depends on action-surface routing and verifiable execution, not only visual GUI control.

21.
arXiv (CS.AI) 2026-06-11

Continual Quadruped Robots Coordination via Semantic Skill Discovery

arXiv:2606.08102v2 Announce Type: replace-cross Abstract: Multi-quadruped coordination has attracted increasing attention due to its enhanced payload capacity, broader contact coverage, and improved adaptability to challenging tasks. Existing methods for multi-quadruped manipulation typically focus on predefined or closed task families, often relying on multi-agent reinforcement learning (MARL) to train task-specific coordination policies. However, such methods struggle in open-ended continual learning settings, where tasks arrive sequentially and robots are expected to acquire new coordination skills while reusing previously learned ones without catastrophic forgetting. To address this challenge, we propose Conquer, a semantic skill-library framework that formulates continual multi-quadruped coordination as a retrieve-adapt-update process. First, to accommodate varying team sizes across tasks, we design a team-structured Self-Allies-Goal (SAG) backbone that supports variable-cardinality robot teams by explicitly modeling each robot's own state, teammate context, and task goal. For each incoming task, Conquer constructs a task-level semantic descriptor from pre-execution information and retrieves a relevant skill from the library for adaptation. After successful execution, Conquer updates the skill library by extracting trajectory-level semantic descriptors and organizing them according to semantic distance, thereby enabling continual skill accumulation and cross-task knowledge transfer. Simulation experiments show that Conquer achieves a final average success rate of 95.6%, demonstrating strong forward transfer and negligible catastrophic forgetting. Real-world rollouts on Unitree Go2 teams further validate the deployment feasibility of Conquer for practical multi-quadruped coordination. Simulation and real-robot demonstration videos are available at: https://conquer-project.pages.dev/.

22.
arXiv (CS.CV) 2026-06-16

CausalDrive: Real-time Causal World Models for Autonomous Driving

World models have emerged as a promising paradigm for scaling autonomous driving (AD) data, yet existing video generative models fall short as interactive simulators. Layout-conditioned renderers rely on "oracle" future trajectories of all background agents, rendering them strictly non-reactive. Conversely, pure action-conditioned predictors lack semantic control over complex interactions and suffer from prohibitive diffusion latencies, hindering closed-loop policy learning. To bridge this gap, we present CausalDrive, a controllable, real-time foundation driving world renderer. CausalDrive operates solely on the initial front-view frame, the ego-vehicle's trajectory, and a macroscopic text prompt. By excluding future NPC layouts, we compel the model to intrinsically predict causal interactions, enabling text-driven control over Driving Sociology, allowing users to dynamically orchestrate diverse counterfactual reactions to identical ego-actions. To overcome the efficiency bottleneck and address the covariate shift in autoregressive generation, we propose a novel Context-Forced DMD architecture. This combines continuous flow-matching with a self-correcting distillation objective, achieving interactive speeds of 12 FPS. This breakthrough transforms the passive video generator into a playable neural simulator. We demonstrate its versatility across three downstream applications: (1) generative closed-loop evaluation with significantly mitigated collision artifacts, (2) large-scale Reinforcement Learning (RL) post-training driven by a Video2Reward module, and (3) real-time human-in-the-loop simulation. Extensive experiments validate that policies trained within CausalDrive's reactive scenarios exhibit superior interaction capabilities in the real world.

23.
arXiv (CS.CV) 2026-06-17

Bridging Modality Disconnect in Self-Reflection via Closed-Loop Visually Grounded Verification

In the era of Vision-Language Models (VLMs), enhancing multimodal reasoning capabilities remains a critical challenge, particularly in handling ambiguous or complex visual inputs, where initial inferences often lead to hallucinations or logic errors. Existing VLMs often produce plausible yet ungrounded answers, and even when prompted to "reflect", their corrections may remain detached from the image evidence. To address this, we propose the MIRROR framework for Multimodal Iterative Reasoning via Reflection On visual Regions. By embedding visual reflection as a core mechanism, MIRROR is formulated as a closed-loop process comprising draft, critique, region-based verification, and revision, which are repeated until the output is visually grounded. To facilitate training of this model, we construct **ReflectV**, a visual reflective dataset for multi-turn supervision that explicitly contains reflection triggers, region-based verification actions, and answer revision grounded in visual evidence. Experiments on both general vision-language benchmarks and representative vision-language reasoning benchmarks show that MIRROR improves correctness and reduces visual hallucinations, demonstrating the value of training reflection as an evidence-seeking, region-aware verification process rather than a purely textual revision step.

24.
arXiv (quant-ph) 2026-06-17

Unveiling Hierarchical Invariants in Multiphoton Linear Optics

arXiv:2506.12857v2 Announce Type: replace Abstract: Linear optical networks driven by quantum states of light are important building blocks of photonic quantum technologies. They access large bosonic Hilbert spaces through multiphoton interference. At the same time, their dynamics are generated by single-particle mode transformations, thereby defining a highly structured subset of multiphoton unitaries and setting boundary on linear optics capability. To elucidate this boundary, we reveal an underlying fine-grained symmetry structure that partitions the multiphoton operator space into invariant subspaces and generates a hierarchy of invariants. We experimentally confirm the conservation of high-order invariants and demonstrate their operational utility in characterizing state reachability and the metrological capability of multiphoton probes. Our framework provides a symmetry-based perspective for understanding and harnessing structured multiphoton dynamics across photonic quantum technologies.

25.
arXiv (CS.CV) 2026-06-17

AlignDrive: Aligned Lateral-Longitudinal Planning for End-to-End Autonomous Driving

Practical autonomous driving requires models that generalize by reasoning through spatial-temporal possibilities to exclude unsafe outcomes. While state-of-the-art (SOTA) methods use parallel planning architectures, they fail to explicitly couple speed decisions with agent behavior along the driving path, leading to suboptimal coordination. To address this, we propose a cascaded framework that transforms longitudinal planning from an independent prediction task into a path-conditioned reasoning process. On the model side, we introduce an anchor-based regression design that conditions longitudinal prediction on the lateral drive path, and reformulate longitudinal planning as 1D displacement prediction along the path. This reduces geometric uncertainty and sharpens the model's focus on interaction-driven dynamics. On the data side, we introduce a planning-oriented data augmentation strategy that simulates rare safety-critical events by programmatically inserting agents and relabeling longitudinal targets to enforce collision avoidance. Evaluated on the challenging Bench2Drive benchmark, our method achieves SOTA performance with a driving score of 89.07 and a success rate of 73.18%, demonstrating significantly improved coordination and safety. Further evaluation on Fail2Drive confirms strong generalization to rare edge cases where parallel formulations typically fail. Project page:https://yanhaowu.github.io/AlignDrive/.