×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Cheng ×
换一批
01.
arXiv (CS.CV) 2026-06-17

MaineCoon: Pursuing A Real-Time Audio-Visual Social World Model

As an increasing majority of global video content is consumed on social platforms for interactive social purposes, video generation models built for social worlds are important but largely overlooked by previous studies. In this work, we define the position of social world models and build a prototype model as the first step towards this goal. While previous world models successfully simulate physical environments or gaming world exploration, they remain fundamentally detached from human-centric social dynamics. To bridge this gap as the first step to social world models, we present MaineCoon, the first real-time audio-visual autoregressive model that has 22B parameters and is capable of real-time streaming generation and sub-second interaction, with a record-breaking frame rate of up to 47.5 FPS, on a single GPU. To the best of our knowledge, MaineCoon is also the first real-time audio-visual generation model specifically optimized for social-interactive applications. To enable efficient and stable training, we introduce several novel techniques into MaineCoon, including self-resampling, cross-modal representation alignment, domain-aware preference optimization, and reinforced online-policy distillation (ROPD). We also design the first agentic streaming inference framework that supports thousand-second-scale or even longer generation while mitigating drift with agentic cache management and prompt planing. These innovations significantly accelerate training while optimizing real-time inference performance. We believe this work not only sets a new state-of-the-art (SOTA) performance benchmark for high-quality, low-latency, and long-horizon audio-visual autoregressive models, but also points out the paradigm shift desired for next-generation AI-native social platforms.

02.
arXiv (CS.AI) 2026-06-19

JustDiag!: A Diagnostic Justification Engine for Accountable Root Cause Analysis

arXiv:2606.19407v1 Announce Type: cross Abstract: Large language models can produce fluent root cause analyses, but fluent final answers alone are insufficient evidence for accountability in high-stakes operations. In real incident response, engineers need to know what evidence supported a diagnosis, which alternatives were considered, where contradictions remained, and whether the system resolved the case or preserved uncertainty. We address this gap with JustDiag, a diagnostic justification engine for RCA that maintains an explicit process state over evidence, findings, competing hypotheses, conflicts, and next checks. We evaluated the system on 66 real-world incidents using a two-layer protocol that separately scores final-answer quality and process quality. Relative to a matched control without diagnostic justification, JustDiag achieved stronger outcome and process scores, while accepting slightly lower terminal completion due to more calibrated non-closure. These results suggest that accountable RCA requires explicit diagnostic justification artifacts and process-aware evaluation, not only fluent final answers.

03.
arXiv (CS.CV) 2026-06-18

Hilbert-Geo: Solving Solid Geometric Problems by Neural-Symbolic Reasoning

Geometric problem solving, as a typical multimodal reasoning problem, has attracted much attention and made great progress recently, however most of works focus on plane geometry while usually fail in solid geometry due to 3D spatial diagrams and complex reasoning. To bridge this gap, we introduce Hilbert-Geo, the first unified formal language framework for solid geometry, including an extensive predicate library and a dedicated theorem bank. Based on this framework, we propose a Parse2Reason method containing two steps of first parsing then reasoning. In the parsing step, we utilize conditional description language (CDL), a formalized language composed of predicates specifically designed to construct geometric conditions, to represent both problem description (natural text) and solid diagrams (visual image). In the reasoning step, we leverage those formal CDL and the theorem bank to perform relational inference and algebraic computation, generating strictly correct, verifiable, and human-readable reasoning processes. Notably, our proposed Hilbert-Geo is also applicable to plane geometry. To advance geometric reasoning, we curate two expert-annotated dataset SolidFGeo2k and PlaneFGeo3k, which are furnished with geometric formal language annotations, solutions and answers. Extensive experiments show that our proposed method achieves the state-of-the-art (SOTA) performance 77.3% in SolidFGeo2k and 84.1% in MathVerse-Solid (one small subset in MathVerse dedicated to solid geometry), substantially outperforming leading MLLMs, such as Gemini-2.5-pro (54.2% on SolidFGeo2k) and GPT-5 (62.9% on MathVerse-Solid). In addition, our method achieves the SOTA accuracy 80.2% in PlaneFGeo3k, demonstrating the generality of the Hilbert-Geo in geometric reasoning. Our code and datasets are released at https://github.com/PremiLab-Math/Hilbert-Geo.

04.
arXiv (CS.LG) 2026-06-11

Analytic Bijections for Smooth and Interpretable Normalizing Flows

arXiv:2601.10774v2 Announce Type: replace Abstract: A key challenge in normalizing flows is finding expressive invertible scalar bijections. Existing approaches face trade-offs: affine transformations are smooth and analytically invertible but lack expressivity; monotonic splines offer local control but are only piecewise smooth and act on bounded domains; residual flows achieve smoothness but need numerical inversion. We introduce three families of analytic bijections that are globally smooth ($C^\infty$), defined on all of $\mathbb{R}$, and analytically invertible in closed form, combining the favorable properties of prior approaches. Beyond serving as drop-in replacements in coupling flows, where they match or exceed spline performance, we develop radial flows: a novel architecture using direct parametrization that transforms the radial coordinate while preserving angular direction. Radial flows exhibit exceptional training stability, produce geometrically interpretable transformations, and on targets with radial structure can achieve comparable quality to coupling flows with $1000\times$ fewer parameters. We provide comprehensive evaluation on 1D and 2D benchmarks, and demonstrate applicability to higher-dimensional physics problems through experiments on $\phi^4$ lattice field theory, where our bijections outperform affine baselines and enable problem-specific designs that address mode collapse.

05.
arXiv (CS.AI) 2026-06-18

AdsMind: A Physics-Grounded Multi-Agent System for Self-Correcting Discovery of Adsorption Configurations on Heterogeneous Catalyst Surfaces

arXiv:2606.19152v1 Announce Type: cross Abstract: Identifying the lowest-energy surface-adsorbate configuration is critical for modeling heterogeneous catalysis, yet exhaustive exploration with ab initio calculations is computationally prohibitive. Machine-learning force fields (MLFFs) accelerate structural relaxation but leave the search over the vast configurational space a major bottleneck, and open-loop large language model (LLM) agents lack a physics-grounded feedback mechanism to correct erroneous initial guesses. We propose AdsMind (Adsorption configuration discovery with Machine intelligence and relaxation feedback), a closed-loop multi-agent framework that enables autonomous error correction through MLFF relaxation feedback. Across four LLM backends, AdsMind achieves consistently high search reliability, with success rates of 100% and 98.8% on the benchmarks AA20 and OCD-GMAE62. Relative to its single-pass (1-Shot) ablation it reduces cross-backend energy dispersion, and it uses only 4.11 and 4.67 MLFF relaxations per case, respectively – an approximately 14-fold reduction over heuristic enumeration baselines. Density functional theory (DFT) validation using VASP/PBE on six representative AA20 systems shows that the reported open-loop Adsorb-Agent outputs exhibit qualitative adsorption-energy sign errors for molecular adsorbates, whereas AdsMind preserves the correct sign in all tested cases with closer quantitative agreement. AdsMind thus delivers reliability, self-reflection, and interpretability simultaneously, supporting more DFT-informed autonomous chemistry workflows.

06.
arXiv (CS.AI) 2026-06-12

CausalMoE: A Billion-Scale Multimodal Foundation Model for Granger Causal Discovery with Pattern-Routed Heterogeneous Experts

arXiv:2606.13024v1 Announce Type: cross Abstract: Granger Causal Discovery (GCD) is fundamental for analyzing temporal dependencies in complex systems. However, existing neural GCD methods predominantly rely on a "one-size-fits-all" paradigm, struggling to capture distribution shifts and dynamic regime changes inherent in real-world time series. This often leads to entangled representations and spurious causal graphs. In this paper, we propose CausalMoE, a billion-scale multimodal Granger causal foundation model that explicitly models patch-level heterogeneity. CausalMoE introduces a Pattern-Routed Mixture of Heterogeneous Experts, which dynamically identifies latent temporal patterns and routes patches to specialized domain experts, effectively decoupling regime-specific mechanisms from shared dynamics. To ensure interpretable graph recovery, we design a Causality-Aware Self-Attention mechanism operating across variables, yielding sparse Granger causal graphs via proximal optimization. Furthermore, CausalMoE is the first to integrate LLMs and VLMs to align numerical signals with textual and visual priors, regularizing causal estimation in complex scenarios. Extensive experiments demonstrate that CausalMoE establishes a new state-of-the-art on fully supervised benchmarks, while effectively generalizing to few-shot settings where traditional methods fail.

07.
arXiv (CS.CV) 2026-06-16

Towards Next-Generation Healthcare: A Survey of Medical Embodied AI for Perception, Decision-Making, and Action

Foundation models have demonstrated impressive performance in enhancing healthcare efficiency across a wide range of medical applications. Nevertheless, their limited ability to perceive, understand, and interact with the physical world significantly constrains their effectiveness in real-world clinical workflows, where safety-critical decision-making and physical execution are tightly coupled. Recently, embodied artificial intelligence (AI) has emerged as a promising physical-interactive paradigm for intelligent healthcare, enabling agents to operate in complex medical environments. As research in this area rapidly expands, understanding how intelligent agents function as integrated, end-to-end systems in clinical environments becomes increasingly critical. However, existing surveys on medical embodied AI largely emphasize individual aspects or functional components, lacking a unified system-level organization of the field. To support and consolidate recent advances, we systematically survey the core components of medical embodied AI, with a particular emphasis on the coordinated integration of perception, decision-making, and action. We further review representative medical applications and relevant datasets, and we analyze the major challenges encountered in real-world clinical practice. Finally, we discuss key directions for future research in this rapidly evolving field. The associated project can be found at https://github.com/VMVLab/Medical_Embodied_AI_Paper_List.

08.
arXiv (CS.LG) 2026-06-16

GD$^2$PO: Mitigating Multi-Reward Conflicts via Group-Dynamic reward-Decoupled Policy Optimization

arXiv:2606.16771v1 Announce Type: new Abstract: As LLMs advance, post-training reinforcement learning (RL) increasingly relies on multi-dimensional rewards to cultivate comprehensive capabilities. This shift demands new algorithms capable of optimizing diverse and potentially competing objectives simultaneously. To address this, existing methods such as Group reward-Decoupled Policy Optimization (GDPO) decompose the overall score into independent reward groups, then compute the RL loss separately within each group. However, this strategy still encounters multi-reward conflicts: a single rollout can yield positive advantages on certain reward dimensions but negative ones on others, causing opposing signals to cancel each other out during aggregation, further hindering RL training efficiency. Inspired by Dynamic sAmpling Policy Optimization (DAPO), which improves RL training efficiency by filtering out ineffective rollouts with near-zero advantages, we propose Group-Dynamic reward-Decoupled Policy Optimization (GD$^2$PO). Specifically, GD$^2$PO employs a conflict-aware filtering mechanism to mask out rollouts suffering from severe reward-wise disagreement. By preventing conflicting signals from canceling each other out, this masking strategy preserves and enhances the magnitude of effective RL advantages, thereby significantly accelerating learning efficiency. Furthermore, we introduce query-level reweighting to dynamically adjust the update intensity of each query based on its overall reward consensus. Experiments on various multi-reward scenarios, including tool calling and human preference alignment, demonstrate that GD$^2$PO consistently and significantly outperforms existing baselines. The code is available at https://github.com/Qwen-Applications/GD2PO.

09.
arXiv (CS.CV) 2026-06-12

IterCAD: An Iterative Multimodal Agent for Visually-Grounded CAD Generation and Editing

Computer-Aided Design is pivotal in modern manufacturing, yet existing automated methods predominantly rely on open-loop, one-shot generation, creating a mismatch with iterative real-world practices. In this paper, we present IterCAD, a unified multimodal agent framework for closed-loop, interactive CAD generation and editing. We formulate the task as a multi-turn interaction between a multimodal agent and an executable CAD sandbox, covering three tasks: Drawing-to-Code, Text-to-Code, and Interactive Editing. To support this, we develop a data synthesis pipeline incorporating advanced industrial manufacturing features to generate standard-compliant multi-view engineering drawings, complex code-editing tasks, and high-fidelity interaction trajectories. We optimize the agent via progressive SFT followed by geometry-aware reinforcement learning with viable-prefix masking to enhance code executability and geometric fidelity. Finally, we introduce the IterCAD-Bench evaluation suite and propose the Chamfer Distance Tolerance-Recall (CD-TR) curve alongside its AUC-TR metric, establishing a survivor-bias-free standard that unifies code validity and geometric precision. Extensive experiments demonstrate that IterCAD achieves highly competitive performance across multiple benchmarks, significantly outperforming existing approaches in both code executability and geometric precision, while exhibiting superior capabilities in closed-loop iterative refinement.

10.
arXiv (CS.LG) 2026-06-19

Influence-Guided Concolic Testing of Transformer Robustness

arXiv:2509.23806v2 Announce Type: replace-cross Abstract: Concolic testing for neural networks alternates concrete execution with constraint solving to search for inputs that flip model decisions. We present a concolic tester for Transformer classifiers that uses SHAP estimates to rank pending path predicates by their impact on the current prediction. To support self-attention with multiple heads in execution backed by SMT solving, we implement attention semantics in pure Python that are compatible with the solver and make the softmax boundary explicit by concretizing exponentiation arguments. We evaluate our method on CIFAR-10 across three compact Transformer classifiers, ResNet18, and VGG16 under a one-pixel budget and a 900s horizon. Across the 500 model–input pairs in this matched comparison, our method achieves 60% success, compared with 15% for a differential evolution baseline that treats the model as a black box. In the primary two-layer Transformer branch-ordering study, SHAP-based predicate prioritization raises success from 56% to 60% and reduces median attack time by 51%. These results show that influence-guided path exploration can make concolic testing a practical way to find adversarial examples in Transformer models.

11.
arXiv (CS.CV) 2026-06-17

See First, Answer Later: Visual Evidence Pre-Alignment via Sufficiency-Driven RL

Multimodal large language models (MLLMs) integrate strong text reasoning with visual inputs, yet their responses can be inconsistent with the underlying images, indicating ineffective utilization of visual evidence during inference. The prevailing training paradigm relies on large-scale caption-based pretraining for general alignment, followed by supervised fine-tuning and reinforcement learning to enable instruction following and complex reasoning. However, such pretraining provides only weak visual grounding: short, coarse captions bias models toward salient objects while neglecting fine-grained visual evidence. In this paper, we introduce Visual Evidence Pre-Alignment (VEPA), an intermediate stage between pretraining and post-training that explores a novel sufficiency-driven objective with Group Relative Policy Optimization (GRPO) to optimize question-conditioned visual evidence descriptions. Extensive experiments across diverse benchmarks show that our VEPA consistently enhances performance on visually demanding evaluations and complements standard supervised post-training. Further analyses show that the income stems from strengthened, transferable visual grounding, rather than from additional task-specific training.

12.
arXiv (CS.AI) 2026-06-16

MimicIK: Real-Time Generative Inverse Kinematics from Teleoperation with FK Consistency

arXiv:2606.15148v1 Announce Type: cross Abstract: Inverse kinematics (IK) remains a critical bottleneck for real-time robot manipulation. Classical numerical solvers achieve high geometric precision but often suffer from discontinuous branch switching and unstable behavior near kinematic singularities during closed-loop deployment. Meanwhile, learned IK approaches frequently struggle to balance spatial accuracy, motion smoothness, and real-time efficiency, particularly when trained on noisy human teleoperation data. We present MimicIK, a real-time generative inverse kinematics framework that learns smooth and robust joint-space motion priors from teleoperation demonstrations through conditional flow matching. Given the current joint configuration and a target end-effector pose, MimicIK predicts continuous delta-joint commands using an efficient two-step iterative refinement process based on a Minimal Iterative Policy (MIP) backbone. To enforce physical consistency, we further introduce an FK consistency loss, a differentiable forward-kinematics regularization that penalizes task-space deviations from the target pose during training. We evaluate MimicIK on a real-world 6-DOF robot dataset containing 8,848 teleoperation demonstrations. MimicIK achieves a mean position error of 4.65 mm, a 10 mm success rate of 92.01\%, and a trajectory spike rate of only 7.99\%. Compared with a UNet diffusion baseline, our method improves both spatial accuracy and motion smoothness while reducing inference latency from 21.66 ms to 6.74 ms. Furthermore, unlike deterministic MLP baselines that catastrophically diverge under out-of-distribution deployment, MimicIK remains stable near singular configurations and enables robust 20 Hz real-time control on deployment hardware.

13.
arXiv (CS.AI) 2026-06-11

Skill-Augmented AI Agents for Medical Research Analysis: An Exploratory Multi-Model Human Evaluation in an NSCLC Transcriptomic Biomarker Task

arXiv:2606.11830v1 Announce Type: new Abstract: Background. Large language models and AI agents are increasingly used to support biomedical research, but native model outputs may omit key analytical steps, misuse methods, or overstate conclusions. We evaluated whether autonomous access to a medical research skill package was associated with higher-quality AI-generated transcriptomic research-analysis outputs compared with native AI without skills. Methods. We conducted an exploratory multi-model human evaluation using a non-small cell lung cancer immunotherapy biomarker task. Six model backbones were tested. The evaluation included 21 anonymized outputs: 9 native-AI outputs and 12 skill-augmented outputs generated through an AI agent implementation represented by OpenClaw. Four non-expert biomedical reviewers and two blinded experts evaluated each output, with two ratings from each reviewer type. The primary outcome was expert-rated overall quality. Results. Skill-augmented outputs showed directionally higher expert overall quality than native-AI outputs (mean 5.50 vs 5.11; difference=0.39; bootstrap 95\% CI, -0.04 to 0.90; Welch p=0.156). Non-expert reviewer quality showed the same direction (mean 4.72 vs 4.47; difference=0.26; bootstrap 95\% CI, -0.25 to 0.80; Welch p=0.373). Expert agreement was limited (single-rating ICC=-0.15), and model-specific effects were descriptive and heterogeneous. Conclusions. Autonomous skill access showed a directional quality signal in this exploratory sample, but the signal was smaller than expert-rating noise and should not be interpreted as confirmatory evidence. The findings primarily motivate larger evaluations of skill-augmented AI agents with stronger reliability controls, platform replication, and biological-validity assessment.

14.
arXiv (CS.LG) 2026-06-17

Recursive Learning Without Collapse: A Weighting-Based Stabilization Framework

arXiv:2502.18049v5 Announce Type: replace-cross Abstract: Recent studies identified an intriguing phenomenon in recursive generative model training known as model collapse, where models trained on data generated by previous models exhibit severe performance degradation. Addressing this issue and developing more effective training strategies have become central challenges in generative model research. In this paper, we investigate this phenomenon within a novel framework, where generative models are iteratively trained on a combination of newly collected real data and synthetic data from the previous training step. To develop an optimal training strategy for integrating real and synthetic data, we evaluate the performance of a weighted training scheme in various scenarios, including Gaussian distribution estimation, generalized linear models, and nonparametric estimation. We theoretically characterize the impact of the mixing proportion and weighting scheme of synthetic data on the final model's performance. Our key finding is that, across different settings, the optimal weighting scheme under different proportions of synthetic data asymptotically follows a unified expression, revealing a fundamental trade-off between leveraging synthetic data and model performance. In some cases, the optimal weight assigned to real data corresponds to the reciprocal of the golden ratio. Finally, we validate our theoretical results on extensive simulated datasets and a real tabular dataset.

15.
arXiv (CS.AI) 2026-06-11

TouchThinker: Scaling Tactile Commonsense Reasoning to the Open World with Large-scale Data and Action-aware Representation

arXiv:2606.11637v1 Announce Type: new Abstract: Touch is a key modality for embodied agents to understand the physical world. Although recent work has incorporated tactile signals into language systems for tactile commonsense reasoning, scaling such systems to realistic open-world settings remains challenging due to two key bottlenecks: (1) current tactile reasoning datasets remain limited in format and scale, providing insufficient supervision for reasoning from tactile observations to physical commonsense and hindering the learning of transferable tactile commonsense; (2) Tactile signals are inherently redundant and action-specific, yet existing methods often overlook these properties, resulting in inefficient representations with limited semantic expressiveness. To address these limitations, we propose TouchThinker, a tactile-language framework that scales tactile commonsense reasoning to the open world from both data and representation perspectives. First, we construct TouchThinker-1M, a million-scale, multi-source tactile reasoning dataset covering 415 objects, 8 scenarios, and 7 sensor types, providing a solid data foundation for open-world generalization. We further introduce TouchThinker-Bench, an open-world benchmark with more realistic and diverse tasks. Then, we propose action-aware modeling mechanism to improve tactile representation efficiency and enable efficient reasoning. Experimental results demonstrate that TouchThinker achieves competitive performance against state-of-the-art models across multiple datasets. Our code and dataset will be made available at: https://github.com/lvkailin0118/TouchThinker.

16.
arXiv (CS.AI) 2026-06-18

Space Is Intelligence: Neural Semigroup Superposition for Riemannian Metric Generation

作者:

arXiv:2606.18828v1 Announce Type: cross Abstract: Traditional approaches place intelligence in the agent, whether as a learned policy or a search procedure. We instead place intelligence in the space itself: a scene induces a Riemannian metric on the configuration manifold, and action reduces to following the geodesics of that metric rather than invoking a separate planner or collision checker. A single Encoder-Router network realizes this idea through three complementary parameter groups – frame parameters that orient the generators, modulation parameters that govern their spatial propagation, and basic coefficients that determine their strength. These groups combine through a shared semigroup-superposition mechanism to produce a single Riemannian metric field, yielding a compact architecture whose geometry scales naturally with scene complexity. Trained on a single two-obstacle scene, the model demonstrates robust zero-shot generalization across unseen obstacle configurations, with orders-of-magnitude separation between collision-free and obstacle-penetrating path costs.

17.
arXiv (CS.CL) 2026-06-15

Decoupled Mixture-of-Experts for Parametric Knowledge Injection

Knowledge injection aims to equip large language models (LLMs) with external, domain-specific, or time-sensitive knowledge. Existing approaches typically face a trade-off between flexibility and integration: retrieval-augmented generation keeps knowledge outside the model but only provides prompt-level augmentation, whereas post-training based methods encode new knowledge into shared parameters but may introduce catastrophic forgetting, knowledge conflict, and costly updates. In this paper, we propose Decoupled Mixture-of-Experts (DMoE), a modular architecture for parametric knowledge injection that decouples both experts and the router from the base model. DMoE converts external knowledge corpora into independently updatable expert modules and uses a lightweight uncertainty-aware router to activate relevant experts only when the base model lacks sufficient knowledge during generation. To support efficient auto-regressive inference, DMoE attaches experts only to the final-layer feed-forward network, preserving KV-cache reuse while enabling parameter-level knowledge augmentation. Experiments on knowledge-intensive benchmarks show that DMoE consistently improves answer quality over retrieval and adapter-based baselines.

18.
arXiv (CS.LG) 2026-06-16

MegaFold: Efficient Training of Next-Generation 3D Attention Protein Models on Cross-Platform GPUs

arXiv:2506.20686v2 Announce Type: replace-cross Abstract: Recent advances in biomolecular modeling have been catalyzed by models such as AlphaFold3 (AF3), which introduce science-informed changes to the transformer architecture. Unlike transformers, a defining characteristic of AF3-style models is their 3D attention over 2D pairwise representations which produces tensors whose computation and memory costs scale cubically with sequence length. As a result, despite moderate parameter counts, AF3-style models are far more expensive to train than size-equivalent transformers, and are severely constrained by GPU memory capacity. Our characterization shows 3D attention fundamentally changes the training workload, causing massive 3D attention maps, complex inter-operator dependencies, kernel fragmentation, and heavy host-side data pipelines which differ substantially from LLM training, leading to poor utilization on modern GPU systems. Moreover, existing GPU optimizations do not adequately address these challenges due to complex cross-layer inter-operator dependencies introduced by 3D attention. Motivated by these challenges, we introduce MegaFold, a novel cross-platform system for efficient training of next-generation 3D-attention protein models. MegaFold combines a memory-efficient 3D-attention kernel, a communication-efficient sharding strategy for quadratic representations, fused operator implementations for critical execution paths, and a determinism-aware host-device pipeline that eliminates preprocessing stalls. Evaluation on both NVIDIA H200 and AMD MI250 GPUs shows that MegaFold enables training with up to 3.36$\times$ longer sequence lengths on 32 GPUs while reducing end-to-end execution time by up to 1.73$\times$ (NVIDIA) and 1.62$\times$ (AMD).

19.
arXiv (CS.AI) 2026-06-11

Towards Data-free and Training-free Compression for Speech Foundation Models Using Parameter Clustering

arXiv:2606.11836v1 Announce Type: cross Abstract: This paper presents a novel data-free and training-free compression approach for speech foundation models using channelwise clustering via k-means. More fine-grained, mixed sparsity pruning by layer-level varying number of parameter clusters is also explored. Experiments conducted on the LibriSpeech dataset suggest that when operating with pruning sparsity of 50% on HuBERT-large, consistent WER reductions of 27.73%/18.61% absolute (34.37%/21.91% relative) over the magnitude-based pruning were obtained on the test-clean and test-other subsets before fine-tuning and 0.19%/0.79% absolute (3.36%/4.62% relative) after fine-tuning with only 3 epochs. Similar WER reductions of 2.86%/5.02% absolute (59.21%/55.29% relative) were observed against magnitudebased pruning on Whisper-large-v3 at 10% sparsity, all with no significant WER increase relative to the uncompressed baseline.

20.
arXiv (CS.CV) 2026-06-17

Reinforcing Dual-Path Reasoning in Spatial Vision Language Models

Spatial VLMs have made substantial progress in geometric perception, yet complex spatial reasoning requiring multi-step inference over depth, distance, and scene relations remains challenging. Moreover, different spatial queries call for fundamentally different strategies: some are best addressed through purely linguistic, step-by-step deduction, while others require explicit 3D grounding before quantitative inference. We present Dual-Path Spatial Reasoning via Reinforcement Learning for Spatial VLMs (SR-REAL), a unified framework that equips a spatial VLM with two complementary reasoning paths: Language-Only Reasoning (LOR), which performs step-by-step linguistic deduction, and Detect-Then-Reason (DTR), which detects 3D geometric cues (e.g., centers or bounding boxes) via region tokens before explicit geometric inference. SR-REAL begins with a cold-start supervised fine-tuning stage that constructs LOR and DTR chain-of-thought supervision and exposes a region-to-3D interface, followed by RL that optimizes the policy model with accuracy and format rewards; for DTR, a discrete center-based detection reward further refines geometric alignment. Across diverse spatial benchmarks, SR-REAL significantly outperforms spatial VLM baselines: (i) a single RL-trained model supports both reasoning paths, with DTR excelling in region-aware tasks through precise 3D localization and LOR enhancing general spatial reasoning; (ii) jointly training both paths fosters mutual reinforcement; (iii) high-quality, blended cold-start data is crucial for stable RL optimization; and (iv) the model generalizes across datasets and domains without per-task tuning, demonstrating positive transfer between LOR and DTR.

21.
arXiv (CS.CV) 2026-06-16

Kairos: A Native World Model Stack for Physical AI

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.

22.
arXiv (CS.CV) 2026-06-18

Learning to Distort: Weakly-Supervised Image Quality Transfer for Prostate DWI Correction

Single-shot echo-planar prostate diffusion-weighted imaging (DWI) is frequently complicated by geometric distortions, which impact the ability to derive reliable diagnoses from such images. Developing automated correction methods is challenged by the absence of paired distorted and undistorted clinical scans. In this paper, we first propose a novel weakly-supervised image quality transfer (IQT) framework from undistorted to distorted images that utilizes image quality assessment (IQA) signals to supervise the transfer process. Unlike traditional methods that require expensive, voxel-wise paired data or resort to developing unpaired algorithms, our approach utilizes image-level quality labels (here, distorted vs. undistorted) to establish latent quality prototypes within a pre-trained feature space. Recognizing that simulating realistic distortions is more reliable than direct unpaired correction, we describe a weakly-supervised prototype flow matching algorithm to explicitly regularize generative trajectories towards distorted prototypes, producing realistic susceptibility artifacts that mimic clinical degradations. By synthesizing these realistic pairs, we enable a second IQT model to be trained in the forward direction for distortion correction. Experimental results demonstrate that our generated images successfully mimic the diagnostic interference of real-world artifacts, which leads to more capable distortion correction IQT models. In addition to qualitative comparisons, we also conduct exhaustive quantitative evaluations that compare our approach with existing unpaired approaches (e.g., CycleGAN, UNIT-DDPM, and OT-FM) - as either forward or reverse alternatives - by assessing clinical downstream task performance in PI-RADS and Gleason score classification, using both in-distribution and external data sets.

23.
arXiv (quant-ph) 2026-06-16

Reconstruction of detector error model for quantum error correction

arXiv:2606.16288v1 Announce Type: new Abstract: Fault-tolerant quantum computing fundamentally relies on the accurate characterization of circuit-level noise to optimize decoding algorithms. However, extracting complex multi-body error correlations remains challenging. Contemporary greedy inference algorithms can suffer from statistical distortion, discarding true physical mechanisms while introducing many unphysical false positives. Here, we introduce the Correlation-Analysis-based Hypergraph Reconstruction (CAHR) algorithm, a globally consistent framework to invert experimental syndrome statistics directly into discrete physical hypergraphs. By coupling exact algebraic correlation equations with a top-down concurrent-pruning strategy, CAHR recovers the fault topology without false positives for both $d=5$ rotated surface codes and dense 8-body 2D color codes in our benchmark settings. Furthermore, we show that exact continuous parameter extraction in dense codes is limited by a variance cascade, where absolute statistical variance accumulates linearly from high- to low-degree mechanisms. This motivates a two-stage inference paradigm: utilizing CAHR to extract the fault topology, followed by continuous probability optimization. This provides a practical approach for characterizing and decoding highly correlated noise in realistic quantum hardware.

24.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

25.
arXiv (CS.AI) 2026-06-11

Human-Enhanced Loop Modeling (HELM): Agent-Based Finite Element Modeling of Concrete Bridge Barriers

arXiv:2606.12025v1 Announce Type: new Abstract: Finite element (FE) modeling of safety-critical infrastructure such as bridge barriers requires high-fidelity nonlinear dynamic analysis, yet the current FE modeling process remains labor-intensive and lacks automation. This paper presents the Human-Enhanced Loop Modeling (HELM) framework, a collaborative human-agent protocol that decomposes long-sequence finite element modeling into discrete, visually verifiable checkpoints across geometry generation, boundary condition definition, and material assignment. The framework is demonstrated through a 20-case matrix of reinforced concrete bridge barriers under MASH TL-4 and TL-5 lateral loading conditions, interfacing specialized agents with two widely used commercial FE softwares, i.e., ANSYS and LS-PrePost. Experimental results show that HELM improves the baseline autonomous modeling success rate from 20% to 75%, with agent-level pass rates for geometry and boundary condition tasks approximately doubling. Error analysis reveals that spatial reasoning and algebraic logic limitations constitute the primary failure modes, underscoring the value of structured human-in-the-loop intervention for modeling automation. The complete agent design code and prompts are open-sourced and can be accessed at: https://github.com/SimAgentDev/Ansys-LSPP-AgentKit.