×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Chen Tang ×
换一批
01.
arXiv (CS.AI) 2026-06-15

Recovering Stranded Discrimination in Knowledge Tracing: Per-Item Bias Correction via Empirical-Bayes Shrinkage

arXiv:2606.14123v1 Announce Type: cross Abstract: Deployed knowledge-tracing models are typically frozen after training, yet systematic per-item logit bias arises, from limited per-item expressivity in backbone architectures and from post-deployment shifts in item properties, degrading prediction quality. Global post-hoc calibrators such as Platt scaling, temperature scaling, and isotonic regression improve probability estimates but leave discriminative ability, as measured by AUC, unchanged. This AUC invariance is a structural consequence of monotone score-only transforms; recovering the stranded discrimination requires conditioning on item identity. We propose SLC (State-space Logit Correction), which converts binary observations to Gaussian pseudo-observations via Laplace/IRLS, applies empirical-Bayes shrinkage through a Kalman smoother, and fits an offset-Platt link. The state-space formulation also yields a detectability bound that characterizes the Bernoulli information floor, explaining why temporal tracking provides no benefit at current data densities. Across four datasets, five backbones, and three seeds, SLC improves AUC on all four datasets and NLL on three, with the advantage concentrating on sparse items. Cross-domain controls suggest that the same phenomenon can arise beyond education when the deployed backbone leaves entity-level bias.

02.
arXiv (quant-ph) 2026-06-11

Exact Dynamics of Topological Order Across a CDW–SPT Transition

arXiv:2606.11303v1 Announce Type: cross Abstract: We investigate the nonequilibrium dynamics of a one-dimensional interacting system across a transition from a charge-density-wave (CDW) phase to a symmetry-protected topological (SPT) phase. Starting from a CDW initial state, we study both sudden quenches and slow ramps into the SPT regime. While the CDW order melts under both protocols, the fate of topological order is sharply different. Following a sudden quench, long-range SPT order does not emerge because the post-quench state contains a finite density of excitations above the topological ground state. In contrast, slow ramps allow the system to follow the instantaneous ground state away from the critical region, enabling the buildup of SPT order with deviations governed by Kibble-Zurek defect production. The dynamics is solvable via a unitary mapping to a quadratic fermionic Hamiltonian, allowing us to compute the Loschmidt echo, correlation functions, and string correlator. The Loschmidt rate function exhibits cusps signaling dynamical quantum phase transitions, while the correlation dynamics reveal the contrasting mechanisms governing quenches and ramps across the transition. These results demonstrate that entering the topological regime is not sufficient for the emergence of topological order; the decisive factor is the suppression of excitation production during the evolution.

03.
arXiv (CS.CL) 2026-06-12

HyperTool: Beyond Step-Wise Tool Calls for Tool-Augmented Agents

Tool-augmented LLM agents commonly rely on step-wise atomic tool calls, where each invocation, observation, and value transfer is exposed in the main reasoning trace. This creates an execution-granularity mismatch: locally deterministic tool workflows are unfolded into repeated model-visible decisions, consuming context and forcing the model to manage low-level dataflow in the trace. We introduce HyperTool, a unified executable MCP-style tool interface that changes the model-visible unit of tool execution. A model invokes HyperTool with a code block that can call existing tools through their original schemas, manipulate returned values, and pass intermediate results locally, folding deterministic tool subroutines into a single outer call. To train models to use this interface, we synthesize HyperTool-format trajectories from cross-tool compositional tasks and verify them in real MCP environments. On MCP-Universe, HyperTool improves average accuracy from 15.69\% to 35.29\% on Qwen3-32B and from 9.93\% to 33.33\% on Qwen3-8B, and surpass GPT-OSS and Kimi-k2.5 on average accuracy, showing that our HyperTool can substantially improve multi-step tool use.

04.
arXiv (CS.AI) 2026-06-16

RoboPIN: Grounded Embodied Reasoning via Pinned Chain-of-Thought

arXiv:2606.15753v1 Announce Type: new Abstract: Embodied reasoning requires models to perceive task-relevant objects and spaces in physical environments and maintain consistent visual grounding throughout multi-step reasoning. However, current vision-language models rely on text-only or coordinate-augmented chain-of-thought, where entity references remain implicit and ambiguous. This may cause the reasoning process to decouple from visual evidence, entity references to drift across steps, and a causal disconnection between the reasoning trajectory and the final answer, with these problems further amplified in multi-view scenarios due to cross-view appearance changes. To address these issues, we propose Pinned Chain-of-Thought (\pincot{}), a structured reasoning paradigm that pins every reasoning step to visual evidence. \pincot{} introduces the concept of \reasoninganchor{}, which binds each task-relevant entity to a structured visual anchor with entity name, unique identity, view index, and spatial grounding, enabling consistent entity tracking across reasoning steps and views. We build a fully automated data generation pipeline to construct \dataset{}, a high-quality \pincot{}-formatted reasoning dataset. We then train \method{} through three-stage post-training that progressively injects embodied knowledge, structured reasoning ability, and process-supervised alignment, with rewards that directly constrain both anchor localization and identity consistency during reasoning. On 14 benchmarks covering embodied spatial reasoning, multi-view reasoning, and pointing, \method{} with only 4B parameters consistently outperforms 7B level open-source embodied models, achieving a 12\% average improvement over the strongest 7B baseline, Mimo-Embodied. Further analysis shows that \pincot{} improves grounding accuracy and cross-step identity consistency, validating the effectiveness of process supervision.

05.
arXiv (CS.AI) 2026-06-17

TuneAhead: Predicting Fine-tuning Performance Before Full Training Begins

arXiv:2606.17660v1 Announce Type: cross Abstract: Fine-tuning large language models (LLMs) is compute-intensive and error-prone: model performance depends sensitively on data quality and hyperparameter choices, and naïve runs can even degrade model performance. This raises a practical question:can we predict fine-tuning performance before committing to a full training run? We present TUNEAHEAD, a lightweight framework for pre-hoc prediction of fine-tuning performance. TUNEAHEAD encodes each candidate run as a meta-feature vector that combines static dataset descriptors with dynamic probe features from a short standardized probe. A predictor maps these features to performance estimates, while SHAP-based attributions provide interpretable diagnostics that reveal which specific features drive the prediction. Across 1,300+ fine-tuning runs on Qwen2.5-7B-Instruct, TUNEAHEAD consistently outperforms strong baselines such as Early-Stop Extrapolation and ProxyLM. On a held-out test set of 370 runs, TUNEAHEAD achieves an RMSE of 1.47 percentage points and places 95.1% of predictions within +3/-3 percentage points of the true score. These accurate continuous predictions support practical go/no-go screening policies that can reduce unnecessary full fine-tuning while retaining most promising runs.

06.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

07.
arXiv (CS.CV) 2026-06-16

CoIRL-AD: Collaborative-Competitive Imitation-Reinforcement Learning in Latent World Models for Autonomous Driving

End-to-end autonomous driving models trained with imitation learning (IL) often generalize poorly, particularly in long-tail scenarios where expert demonstrations are sparse. Reinforcement learning (RL) can provide complementary task-level supervision, but applying RL to real-world autonomous driving is challenging in offline settings without interactive simulators, where datasets are dominated by expert actions and provide limited behavioral diversity. We propose CoIRL-AD, a competitive dual-policy framework that integrates IL and RL under a unified offline training regime. CoIRL-AD decouples imitation and reward optimization into separate actors to alleviate objective conflicts, uses imagined future rollouts for long-horizon reward estimation, and introduces a competition mechanism that selectively transfers beneficial behaviors while keeping RL anchored to expert-like driving. Experiments on the nuScenes benchmark show that CoIRL-AD consistently improves robustness over strong IL-based baselines, with especially large gains in cross-city generalization and long-tail scenarios. Code is available at: https://github.com/SEU-zxj/CoIRL-AD.

08.
arXiv (CS.CL) 2026-06-17

ReproRepo: Scaling Reproducibility Audits with GitHub Repository Issues

Reproducing research results from papers and released code is central to scientific progress. Existing works have introduced benchmarks to evaluate whether LLM agents can assist with reproducibility, but they are difficult to scale due to their reliance on substantial manual effort for data curation and evaluation. We introduce ReproRepo, a scalable framework for reproducibility evaluation that leverages human-raised GitHub issues as naturally occurring supervision on realistic reproduction blockers. We instantiate ReproRepo on 1,149 recent machine learning papers from major conferences and evaluate four frontier model-agent configurations. Our results show that LLM agents, even without executing code, can identify many real-world reproducibility problems from paper-repository pairs: the best agent in our study, namely Codex with GPT-5.5, surfaces at least one semantically related human-reported blocker for ~90% of papers in the study. Further analysis shows that agents are particularly effective for surfacing visible failures and identifying the right semantic region, but may still be insufficient in exact localization. ReproRepo can serve as a reusable, scalable framework for future evaluations of LLM agents on real-world reproducibility auditing. Our code is released at https://github.com/LithiumDA/ReproRepo.

09.
arXiv (CS.AI) 2026-06-19

"**Important** You should give me full credits!": Exploring Prompt Injection Attacks on LLM-Based Automatic Grading Systems

arXiv:2606.03090v2 Announce Type: replace-cross Abstract: The emergence of large language models (LLMs) has significantly accelerated recent research on LLM-based automatic grading (AG) systems. Benefiting from the strong instruction-following capabilities and broad prior knowledge of LLMs, educators can deploy AG systems across diverse tasks using only natural language rubrics while achieving satisfactory grading performance. Despite these advantages, new security concerns may also arise. In particular, prompt injection (PI) attacks have recently become a major threat to LLM-based applications. In the context of AG, attackers can potentially exploit PI vulnerabilities to manipulate grading systems into assigning artificially high scores regardless of the actual answer quality. Such behavior poses serious risks to the fairness, reliability, and integrity of educational assessment. In this work, we study PI attacks in AG systems, and systematically investigate the effectiveness of such attacks in educational scenarios. We further evaluate the effectiveness of existing defensive strategies against these attacks. Through comprehensive experiments under rubric-based grading settings, we demonstrate that current LLM-based AG systems remain highly vulnerable to PI attacks. We hope that our findings raise awareness of this emerging threat and motivate future research toward secure, robust, and trustworthy LLM-based educational systems.

10.
arXiv (CS.CV) 2026-06-16

Ultra Flash: Scaling Real-Time Streaming Video Generation to High Resolutions

While recent autoregressive video diffusion models achieve remarkable streaming quality, they remain confined to low resolutions (e.g., 480P), leaving efficient, scalable, real-time high-resolution video generation a fundamental open challenge. To bridge this gap, we present Ultra Flash, a cascaded streaming framework capable of real-time high-resolution video generation. Ultra Flash achieves ~30 FPS at 1K resolution and ~18 FPS at 2K resolution on a single GPU through three key contributions: (1) an architecture-preserving T2V-to-TV2V super-resolution training paradigm coupled with an AIGC-oriented data degradation pipeline that effectively preserves the generative capability of the base model, enabling enhanced high-resolution detail when cascaded after mainstream low-resolution generative models; (2) a causal streaming latent upsampler paired with a high-resolution decoder, which enhances spatiotemporal coherence while enabling efficient latent spatial scaling and precise high-resolution decoding with negligible computational overhead; and (3) a cascade high-resolution streaming video generation optimization scheme that first performs hybrid-reward-enhanced sparse causalization and single-step distillation of the super-resolution model, then introduces cascaded streaming self-forcing preference optimization with dynamic cache management, jointly enhancing overall coherence, improving quality, and enabling real-time high-resolution streaming video generation. Extensive experiments demonstrate that Ultra Flash reliably produces ultra-high-resolution streaming video while maintaining state-of-the-art visual quality and superior efficiency. Project Page: https://xin1u.github.io/UltraFlash/

11.
arXiv (CS.CL) 2026-06-15

CoRe: A Continuously Reward-Finetuned LLM Query Rewriter for Multi-Stage Context-Aware Relevance in Web-Scale Video Search

LLM-based query rewriters in production face a tension: the training reward must reflect how the rewrite is consumed by the production ranker, yet the training procedure must be cheap enough to support continuous redeployment as data drifts. We present CoRe (Context Relevance), such a system, redeployed weekly for over five months in a major short-video search engine. Our reward uses the deployed multimodal relevance model as its source and a multiplicative ratio form mirroring the production fusion algebra, closing the simulation-production gap that offline reward proxies leave open. A semi-online Mixed Preference Optimization loop makes this reward affordable at multi-million-instance weekly scale: a DPO-style pairwise objective restricts the gradient pass to a small top-k/bottom-k subset of sampled trajectories, and a phase structure reduces trainer/inference-server parameter syncs from per-step to per-phase. An automated promotion gate over reward-like and stability metrics detected and recovered from a real reward-hacking incident in production. Rewriter output is consumed as parallel relevance signals at recall, rawrank, and finerank without displacing the original signals, bounding rewriter-failure blast radius. Online A/B from two sequential production launches, first deploying the rewriter at finerank, then extending consumption to recall and rawrank, delivers statistically significant reductions in change-query rate on rewrite-impacted queries, with all headline relevance and engagement metrics moving in the expected direction.

12.
arXiv (CS.CL) 2026-06-15

Decoupled Mixture-of-Experts for Parametric Knowledge Injection

Knowledge injection aims to equip large language models (LLMs) with external, domain-specific, or time-sensitive knowledge. Existing approaches typically face a trade-off between flexibility and integration: retrieval-augmented generation keeps knowledge outside the model but only provides prompt-level augmentation, whereas post-training based methods encode new knowledge into shared parameters but may introduce catastrophic forgetting, knowledge conflict, and costly updates. In this paper, we propose Decoupled Mixture-of-Experts (DMoE), a modular architecture for parametric knowledge injection that decouples both experts and the router from the base model. DMoE converts external knowledge corpora into independently updatable expert modules and uses a lightweight uncertainty-aware router to activate relevant experts only when the base model lacks sufficient knowledge during generation. To support efficient auto-regressive inference, DMoE attaches experts only to the final-layer feed-forward network, preserving KV-cache reuse while enabling parameter-level knowledge augmentation. Experiments on knowledge-intensive benchmarks show that DMoE consistently improves answer quality over retrieval and adapter-based baselines.

13.
arXiv (CS.LG) 2026-06-17

AIMER: Calibration-Free Task-Agnostic MoE Expert Pruning

arXiv:2603.18492v3 Announce Type: replace Abstract: Mixture-of-Experts (MoE) language models increase parameter capacity without proportional per-token computation, yet deployment still requires storing the full expert pool, making expert pruning important for reducing memory and serving overhead. Existing task-agnostic expert-pruning methods are typically calibration-dependent: they estimate expert importance from routing or activation statistics on a calibration set, making pruning decisions sensitive to calibration-data variation while introducing substantial preprocessing cost. We propose AIMER (Absolute mean over root mean square IMportance for Expert Ranking), a simple calibration-free criterion that identifies more distinct experts by capturing the concentration pattern of expert weights, making it well suited for task-agnostic expert pruning. Across 7B to 47B MoE language models with distinct architectures and 16 diverse benchmarks, AIMER consistently delivers stronger capability balance across diverse tasks than existing calibration-free methods. Surprisingly, AIMER also achieves better balance than strong calibration-based expert-pruning baselines calibrated on the widely used task-agnostic C4 corpus, while requiring only 0.22–2.06 seconds to score all experts.

14.
medRxiv (Medicine) 2026-06-15

Filum Terminale Diameter on Routine Pediatric MRI: A Large-Cohort Clinical Reference in 3,406 Children and the Age-Dependent Meaning of the 2-mm Thickened-Filum Threshold

Background. A filum diameter >2 mm is the conventional MRI threshold for a thickened filum, but it derives from small, mostly adult series showing no age dependence; whether one cutoff suits all of childhood is untested. Objective. To build an age-specific filum-diameter reference on routine pediatric MRI and test, adjusting for image resolution, whether the 2-mm threshold is age-stationary. Materials and methods. In this retrospective study an nnU-Net tracer measured the maximal filum diameter on consecutive lumbosacral MRI; versus manual tracing it showed negligible bias but moderate single-measure agreement. After excluding report-confirmed fatty filum, lipoma, or tethered cord, the proportion >2 mm was analysed within one acquisition protocol and by logistic regression adjusting for voxel size and slice thickness. Results. Of 7,245 examinations, 3,869 (53%) were traceable; untraced ones were younger (median 0.75 vs 2.0 years). The presumed-normal cohort had median diameter 1.48 mm. At matched resolution, 2 mm marked the 94th percentile in infants (5.6% exceeded it) but the 83rd by 3-6 years (17.4%); the age effect persisted after adjusting for voxel size and slice thickness (3-6 years vs infants, adjusted OR 4.7; P < .001). Conclusion. Filum diameter clusters near 1.5 mm, and the fixed 2-mm cutoff flags ~5% of infants but ~17% of preschoolers. Caliber should be judged against an age-specific clinical reference, not one fixed cutoff; a thick filum is not itself a diagnosis of tethered cord.

15.
arXiv (CS.CV) 2026-06-16

MeshLoom: Feed-Forward Non-Rigid Registration of Mesh Sequences

We present MeshLoom, a feed-forward registration network that directly reconstructs vertex deformations across mesh sequences. Our approach advances non-rigid registration beyond existing models, which are typically constrained by costly per-instance optimization, narrow object categories, pairwise-only inputs, or merely intermediate outputs. The network is simple and efficient, registering multiple meshes within seconds. At its core lies a topology-aware encoder–decoder design. Specifically, we first introduce a topology-aware point representation that encodes the anchor (reference) mesh's topology into its per-vertex features. This representation strengthens the network's understanding of the anchor-mesh geometry and disambiguates points that are Euclidean-close yet geodesically distant. We then propose a multi-modal encoder that fuses this anchor-mesh representation with complementary cues from each frame, such as shape latents and image features. These multi-source signals are compressed into a compact global motion embedding that captures dense inter-frame correspondence. A lightweight decoder then queries this global embedding with the anchor-mesh point representation, retrieving per-vertex deformations at target timestamps. Through extensive experiments across diverse motions and object categories, we show that MeshLoom achieves state-of-the-art results on non-rigid registration. In addition, we find that our global embedding-then-query paradigm naturally enables the network to generate deformations at intermediate timestamps, which extends MeshLoom to motion interpolation and mesh morphing. Project page: https://meshloom.github.io/ .

16.
arXiv (CS.CL) 2026-06-17

MedicalAgentsBench for Complex Medical Reasoning: Comparing Internalized Reasoning Models versus Externalized Agent-based Frameworks

Complex medical reasoning requires integrating heterogeneous clinical evidence across multiple inference steps. Large language models (LLMs) now approach this through two routes: internalized reasoning and externalized agent scaffolding (frameworks that decompose problems collaboratively amongst multiple LLMs). To determine whether these routes are exclusive or complementary, we introduce MedicalAgentsBench, a filtered benchmark of 862 complex clinical questions drawn from the union of eight medical datasets via difficulty-aware curation and contamination screening. Evaluating three internalized reasoning models (DeepSeek-R1, o1-mini, and o3-mini), seven base models, and nine externalized agent-based methods, we find that internalized and externalized approaches each independently improve performance, and that their benefits compound: the highest accuracy is achieved by layering agent workflows onto an internalized reasoning model (i.e., o3-mini + MDAgents with 35.1%). Pareto analysis shows this combination dominates the cost-performance frontier; moreover, lightweight optimization on inexpensive models offers an entry point for resource-constrained settings. Our benchmark is at https://github.com/gersteinlab/MedicalAgentsBench.

17.
arXiv (CS.LG) 2026-06-15

Towards Efficient Large Language Reasoning Models via Extreme-Ratio Chain-of-Thought Compression

arXiv:2602.08324v5 Announce Type: replace Abstract: Chain-of-Thought (CoT) reasoning successfully enhances the reasoning capabilities of Large Language Models (LLMs), yet it incurs substantial computational overhead for inference. Existing CoT compression methods often suffer from a critical loss of logical fidelity at high compression ratios, resulting in significant performance degradation. To achieve high-fidelity, fast reasoning, we propose a novel EXTreme-RAtio Chain-of-Thought Compression framework, termed Extra-CoT, which aggressively reduces the token budget while preserving answer accuracy. To generate reliable, high-fidelity supervision, we first train a dedicated semantically-preserved compressor on mathematical CoT data with fine-grained annotations. An LLM is then fine-tuned on these compressed pairs via a mixed-ratio supervised fine-tuning (SFT), teaching it to follow a spectrum of compression budgets and providing a stable initialization for reinforcement learning (RL). We further propose Constrained and Hierarchical Ratio Policy Optimization (CHRPO) to explicitly incentivize question-solving ability under lower budgets by a hierarchical reward. Experiments on three mathematical reasoning benchmarks show the superiority of Extra-CoT. For example, on MATH-500 using Qwen3-1.7B, Extra-CoT achieves over 73\% token reduction with an accuracy improvement of 0.6\%, significantly outperforming state-of-the-art (SOTA) methods. Our source codes have been released at https://github.com/Mwie1024/Extra-CoT.

18.
arXiv (CS.LG) 2026-06-16

Factorized Neural Operators Decompose Dynamic and Persistent Responses

arXiv:2606.16900v1 Announce Type: new Abstract: Physical systems often exhibit heterogeneous mechanisms, where rapidly evolving dynamics coexist with persistent structures. Capturing such multiscale physical behavior remains challenging for existing neural operators, which typically rely on single dominant inductive bias and therefore couple distinct physical responses into a shared representation. We introduce the Unified Green's Function Framework across domains and propose the Factorized Neural Operators (FaNO), which decompose spectral representations into equivariant dynamic responses and invariant persistent responses, leading to better interpretability and generalization. Mechanistically, we show that the two operator branches spontaneously specialize into distinct physical roles that remain consistent across scales and domains: the equivariant branch captures rapidly varying transient dynamics, whereas the invariant branch extracts coherent persistent structures. This factorized mechanism of FaNO improves prediction accuracy, parameter efficiency and cross-scale generalization across physical systems and domains. In particular, it maintains consistent predictions under long-horizon autoregressive rollout, cross-resolution extrapolation and physical-regime shifts. These findings suggest that scalable physical modeling may benefit from moving beyond single-inductive-bias formulations toward factorized operator representations that better reflect the heterogeneous organization of physical systems, accelerating the reliable deployment of machine learning for scientific computing and discovery.

19.
arXiv (CS.CL) 2026-06-15

MASLab: A Unified and Comprehensive Codebase for LLM-based Multi-Agent Systems

LLM-based multi-agent systems (MAS) have demonstrated significant potential in enhancing single LLMs to address complex and diverse tasks in practical applications. Despite considerable advancements, the field lacks a unified codebase that consolidates existing methods, resulting in redundant re-implementation efforts, unfair comparisons, and high entry barriers for researchers. To address these challenges, we introduce MASLab, a unified, comprehensive, and research-friendly codebase for LLM-based MAS. (1) MASLab integrates over 20 established methods across multiple domains, each rigorously validated by comparing step-by-step outputs with its official implementation. (2) MASLab provides a unified environment with various benchmarks for fair comparisons among methods, ensuring consistent inputs and standardized evaluation protocols. (3) MASLab implements methods within a shared streamlined structure, lowering the barriers for understanding and extension. Building on MASLab, we conduct extensive experiments covering 10+ benchmarks and 8 models, offering researchers a clear and comprehensive view of the current landscape of MAS methods. MASLab will continue to evolve, tracking the latest developments in the field, and invite contributions from the broader open-source community.

20.
arXiv (CS.CV) 2026-06-16

VEPHand: View-Efficient Photometric Hand Performance Capture at Scale

Robust, high-fidelity 3D hand capture, while fundamental to digital human creation, remains challenging with practical multi-view systems that balance rich photometry with the geometric ambiguities of reconstruction arising from limited viewpoint density. This paper presents an end-to-end pipeline for dynamic hand performance capture and registration, specifically designed for view-efficient setups ($\sim$20 views). We address key challenges with two primary innovations. First, to overcome reconstruction difficulties like limited view overlap and background clutter, our mask-free neural method robustly extracts detailed hand geometry and appearance from unmasked images using scene parameterization and scenario-specific density regularization. Second, addressing registration challenges such as accurately capturing non-linear skin deformations and ensuring plausible results during severe self-contact, we propose a physics-inspired framework. It aligns reconstructions to a personalized hand model by optimizing intrinsic volumetric offsets within its canonical tetrahedral mesh, alongside pose parameters. This approach, supported by robust losses and optimization, captures fine surface deformations, ensures plausible results under severe articulation and self-contact, and demonstrates strong tolerance to input noise. We demonstrate the scalability and robustness of our automated pipeline on an extensive dataset of over 12,000 sequences, from which we also derive a large-scale, high-quality synthetic 2D/3D hand dataset for training downstream tasks. This showcases its effectiveness for single hands, intricate two-hand interactions, and natural hand-object manipulations. Our method achieves state-of-the-art reconstruction fidelity in view-efficient, unmasked scenarios and highly accurate registration. Our project page are available at https://zyshen021.github.io/VEPHand/.

21.
arXiv (CS.CV) 2026-06-11

UI2Code^N: UI-to-Code Generation as Interactive Visual Optimization

UI-to-code aims to translate UI screenshots into executable front-end code. Despite progress with vision-language models (VLMs), most existing methods formulate UI-to-code as a single-pass generation, which mismatches real-world UI development that is inherently iterative and feedback-driven. We reformulate UI-to-code as an interactive visual optimization problem, where code generation is embedded in a closed-loop process of execution, visual inspection, and iterative refinement driven by rendered visual feedback. To address the non-differentiability of visual objectives and the noise of absolute visual evaluators, we propose Relative Visual Policy Optimization (RVPO), a preference-based reinforcement learning method that optimizes relative visual rankings among rendered candidates under execution feedback. We instantiate this paradigm in UI2Code^N, an open-source 9B model trained via continual pre-training, supervised fine-tuning, and reinforcement learning. Experiments demonstrate state-of-the-art performance on UI drafting, UI polishing, and UI editing benchmarks, even outperforming larger models, with performance consistently improving through iterative visual optimization. Our code and models are available at https://github.com/zai-org/UI2Code_N.

22.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.

23.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

24.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

25.
arXiv (CS.AI) 2026-06-11

RoboNaldo: Accurate, Stable and Powerful Humanoid Soccer Shooting via Motion-Guided Curriculum Reinforcement Learning

arXiv:2606.11092v2 Announce Type: replace-cross Abstract: Elite humanoid soccer shooting requires whole-body stability, high-impulse whole-body interactions, and accuracy to targets. Motion tracking-driven reinforcement learning (RL) provides stability in whole-body movement coordination, but a fixed reference makes it hard to adapt to varied ball positions and strike timings; in contrast, task reward-driven RL struggles to explore and discover valid kicks from scratch. We therefore introduce RoboNaldo, a three-stage motion-guided curriculum RL framework for high-impulse humanoid interaction. A single human-kick reference is used as a scaffold and progressively shifts optimization towards shooting performance. The curriculum first learns a stable whole-body kicking prior, then adapts the kick to free-kick settings where the ball is stationary at random positions, and finally extends it to moving-ball shooting through a locomotion-command and kick-trigger interface. A high-level heuristic planner controls this interface during training, while alternative high-level controllers can drive the same low-level policy at inference. In simulation, RoboNaldo demonstrates free-kick shot error 48.6% lower and shoot velocity 2.96x than prior work baselines. In real world on a Unitree G1 with onboard perception, RoboNaldo attains 0.73 m and 0.86 m average target shooting error from 3 m away in free-kick and moving-ball cases, accordingly. And the post-contact ball velocity reaches 13.10 m/s, which is 59-71% of reported professional open-play shot speed. Project page: https://opendrivelab.com/RoboNaldo.