×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Chen Tang ×
换一批
01.
arXiv (CS.CV) 2026-06-17

TerraTransfer: Learning End-to-End Driving Policies Without Expert Demonstrations

End-to-end autonomous driving has achieved state-of-the-art performance on benchmarks and real-world deployments. Its standard training recipe, however, is expensive across all stages: collecting and labeling millions of driving frames is costly, and closed-loop RL on images is bottlenecked by the per-step cost of photorealistic rendering plus a forward pass through a large vision backbone. Self-play in vectorized simulators changes the economics: millions of rollout steps per second, and a state distribution naturally rich in collisions, near-misses, and recoveries that no driving log contains. Our approach exploits this asymmetry by decoupling learning to drive from learning to see. We pretrain a single policy by self-play, then align its latent space with a pretrained vision backbone, through the action KL divergence and a batch-relational low-rank structural loss. The action target comes from the self-play policy, so alignment never supervises against a logged trajectory: a paired dataset of (image, scene-state) frames suffices, with no need for the curated expert demonstrations that imitation pretraining is built on. On photorealistic 3D Gaussian splatting closed-loop scenarios, the resulting end-to-end policy matches or exceeds prior end-to-end methods.

02.
arXiv (CS.CV) 2026-06-12

Goal2Pixel: Grounding Goals to Pixels for Vision-Language Navigation

Vision-language models (VLMs) have become a common foundation for vision-and-language navigation in continuous environments (VLN-CE). Yet most VLM-based methods cast navigation as low-level action prediction, an interface that is ambiguous, tied to short-horizon motion primitives, and inefficient due to repeated VLM querying. We propose Goal2Pixel, a pure pixel-based paradigm that reformulates VLN-CE as navigable pixel grounding. Rather than predicting actions, Goal2Pixel uses the image plane as a unified spatial interface between VLM reasoning and robot motion: the model predicts a visible navigable pixel to the agent, which is back-projected into a 3D waypoint for forward navigation. For non-forward actions, we append auxiliary directive regions to the image plane, where the left/right/bottom regions are interpreted as turning left, turning right, and stopping, respectively. To enable long-horizon navigation, we propose a visibility-aware keyframe memory for compact and informative history representation. To adapt pretrained VLMs to navigable pixel grounding, we introduce semantic embeddings and coordinate-aware auxiliary losses. Goal2Pixel achieves competitive state-of-the-art performance while requiring fewer VLM inference calls than prior methods. On R2R-CE Val-Unseen it achieves 54.1% SR and 52.5% SPL with just 7.75 VLM calls per episode, 6x fewer than the 46.62 required by direct action prediction at 32.9% SR. The same trend holds on RxR-CE.Project Page: https://baobao0926.github.io/Goal2Pixel/.

03.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

04.
arXiv (CS.CV) 2026-06-16

Structure-aware Knowledge-guided Heterogeneous Mamba for Zygomaticomaxillary Suture Assessment

The Zygomaticomaxillary Suture is a key circummaxillary structure that connects the zygomatic bone and the maxilla, which serves as a primary site of resistance during maxillary advancement, and its maturation status directly influences the timing and efficacy of orthopedic interventions. However, accurate staging of ZMS maturation remains challenging due to subtle high-frequency transitions in suture lines and the global semantic ambiguity between adjacent stages. To address this, we present the first public ZMS dataset, comprising 3,790 ZMS images covering the entire age range from 4 to 24 years. Based on this dataset, we propose SKMamba, a Structure-aware and Knowledge-guided Mamba-based multi-modal framework for automated ZMS maturation assessment. SKMamba adopts a decoupled dual-path architecture that mimics the hierarchical diagnostic process used by experienced orthodontists. We first introduce an Implicit Edge Extractor (IEE), which leverages structural pre-training to reduce trabecular noise and accentuate sutural boundaries. Complementarily, a Cross-Modal Semantic Alignment (CSA) module is designed to incorporate anatomical descriptions from a large language model (LLM). This module helps align local morphological cues with global semantic descriptions while ensuring that objective morphological evidence remains the primary basis for decisions. Extensive experiments on our ZMS dataset demonstrate that SKMamba achieves state-of-the-art performance compared to existing methods. Code is available at https://github.com/galaxygxq1116/SKMamba.

05.
arXiv (CS.CL) 2026-06-16

PhoneHarness: Harnessing Phone-Use Agents through Mixed GUI, CLI, and Tool Actions

Phone agents are increasingly expected to complete real mobile workflows rather than merely predict the next screen action. However, much of the current mobile-agent literature still evaluates agents primarily as GUI controllers that observe a screen, emit taps and swipes, and are scored by target app state. Real phone-use tasks are broader: they require deciding when to use app GUIs, device-side commands, or structured tools, while leaving evidence that the intended side effect actually occurred. We introduce PhoneHarness, a mixed-action benchmark and execution harness for studying phone-use agents on verifiable mobile workflows. PhoneHarness runs a device-side agent loop over GUI, CLI, and host-side tool actions, combining deterministic action routing with bounded GUI delegation and auditable execution traces. Its benchmark, PhoneHarness Bench, evaluates whether agents complete tasks with observable side effects, not only whether they produce plausible final answers. On the annotated evaluation split, PhoneHarness reaches a 75.0% pass rate, outperforming the strongest non-PhoneHarness settings by 12.9 percentage points. PhoneHarness and PhoneHarness Bench therefore play distinct but mutually dependent roles: the harness makes mixed phone workflows executable, while the benchmark measures whether agents can use that harness reliably and safely. Our findings suggest that reliable phone automation depends on action-surface routing and verifiable execution, not only visual GUI control.

06.
arXiv (CS.CL) 2026-06-17

MedicalAgentsBench for Complex Medical Reasoning: Comparing Internalized Reasoning Models versus Externalized Agent-based Frameworks

Complex medical reasoning requires integrating heterogeneous clinical evidence across multiple inference steps. Large language models (LLMs) now approach this through two routes: internalized reasoning and externalized agent scaffolding (frameworks that decompose problems collaboratively amongst multiple LLMs). To determine whether these routes are exclusive or complementary, we introduce MedicalAgentsBench, a filtered benchmark of 862 complex clinical questions drawn from the union of eight medical datasets via difficulty-aware curation and contamination screening. Evaluating three internalized reasoning models (DeepSeek-R1, o1-mini, and o3-mini), seven base models, and nine externalized agent-based methods, we find that internalized and externalized approaches each independently improve performance, and that their benefits compound: the highest accuracy is achieved by layering agent workflows onto an internalized reasoning model (i.e., o3-mini + MDAgents with 35.1%). Pareto analysis shows this combination dominates the cost-performance frontier; moreover, lightweight optimization on inexpensive models offers an entry point for resource-constrained settings. Our benchmark is at https://github.com/gersteinlab/MedicalAgentsBench.

07.
arXiv (CS.LG) 2026-06-19

Predicting Mergeability of Parameter-Efficient Fine-Tuning Updates

arXiv:2606.19549v1 Announce Type: new Abstract: Low-rank adaptation (LoRA) makes it cheap to train many domain- and task-specific language model adapters, but whether two adapters can be merged is usually discovered only after both have been fully trained and evaluated. This late feedback is costly: adapters that are strong in isolation can interfere destructively once their updates are combined. We ask whether this outcome can be anticipated. We formalize adapter mergeability as the degree to which an adapter preserves its single-task utility after merging, and show that it can be forecast from signals measured in the first few percent of training – chiefly how the low-rank updates and their gradients align across tasks and how much they disturb shared representations. We package these signals into MergeProbe, a lightweight predictor that estimates pairwise and set-level retention and turns the estimate into a concrete decision: merge directly, reweight, prune, or route. On MERGE-PEFT, a five-domain benchmark spanning math, code, science, instruction following, and safety, MergeProbe attains the best average and worst-case retention among strong interference-aware merge baselines while adding far less deployment overhead than full task routing. This turns LoRA merging from a post-hoc engineering step into an anticipatory measurement problem.

08.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.

09.
arXiv (CS.CV) 2026-06-18

Learning to Distort: Weakly-Supervised Image Quality Transfer for Prostate DWI Correction

Single-shot echo-planar prostate diffusion-weighted imaging (DWI) is frequently complicated by geometric distortions, which impact the ability to derive reliable diagnoses from such images. Developing automated correction methods is challenged by the absence of paired distorted and undistorted clinical scans. In this paper, we first propose a novel weakly-supervised image quality transfer (IQT) framework from undistorted to distorted images that utilizes image quality assessment (IQA) signals to supervise the transfer process. Unlike traditional methods that require expensive, voxel-wise paired data or resort to developing unpaired algorithms, our approach utilizes image-level quality labels (here, distorted vs. undistorted) to establish latent quality prototypes within a pre-trained feature space. Recognizing that simulating realistic distortions is more reliable than direct unpaired correction, we describe a weakly-supervised prototype flow matching algorithm to explicitly regularize generative trajectories towards distorted prototypes, producing realistic susceptibility artifacts that mimic clinical degradations. By synthesizing these realistic pairs, we enable a second IQT model to be trained in the forward direction for distortion correction. Experimental results demonstrate that our generated images successfully mimic the diagnostic interference of real-world artifacts, which leads to more capable distortion correction IQT models. In addition to qualitative comparisons, we also conduct exhaustive quantitative evaluations that compare our approach with existing unpaired approaches (e.g., CycleGAN, UNIT-DDPM, and OT-FM) - as either forward or reverse alternatives - by assessing clinical downstream task performance in PI-RADS and Gleason score classification, using both in-distribution and external data sets.

10.
arXiv (CS.CV) 2026-06-19

3D-PLOT-LLM: Part-Level Object Tokens for 3D Large Language Models

3D multimodal large language models (3D MLLMs) describe a 3D object as a whole but cannot address, name, or reason about its parts. Prior part-aware attempts add segmentation decoders, heavier 3D encoders, or bounding-box grammars at substantial parameter cost. We take a fundamentally different path: we reorganize the input token stream so that parts become directly addressable through the LLM's own vocabulary. Our model, 3D-PLOT-LLM, partitions the frozen point encoder's patches into K locally coherent regions and inserts, before each region's patch tokens, a learnable per-region marker and a reserved vocabulary token ; a Marker-Space Refinement (MSR) module then conditions each marker on its region's spatial statistics and adjacency neighbors. The model thus cites parts in its output and follows prompts that refer to parts by token, a capability absent from prior object-level 3D MLLMs. To probe this interface, we construct PartVerse-QA, a vocabulary-level part-QA benchmark adapted from PartVerse mesh annotations (77K training pairs and 588 held-out queries on disjoint object splits), on which 3D-PLOT-LLM reaches caption-to-slots Jaccard 0.459 and Exact-match 13.78%, with a slot-to-caption GPT-4o judge of 44.68. On the 3DCoMPaT-GrIn part-aware grounded description benchmark, 3D-PLOT-LLM outperforms PointLLM, Kestrel, PARIS3D, and SegPoint on every text-output metric, and ShapeLLM on 3 of 4, with up to +3.03 GPT-4o judge over PointLLM. On Objaverse whole-object captioning, adding PartVerse-QA at Stage 2 yields +0.65 SBERT and +1.85 GPT-4o over PointLLM, and tops PointLLM-PiSA on 4 of 5 traditional metrics (SBERT, SimCSE, BLEU-1, METEOR) despite targeting a different (part-grounded) objective. All with under 1M new trainable parameters on a frozen point encoder, an order of magnitude below prior part-aware 3D MLLMs, and no segmentation decoder or bounding-box head.

11.
arXiv (CS.CV) 2026-06-19

HumanScale: Egocentric Human Video Can Outperform Real-Robot Data for Embodied Pretraining

Embodied foundation models are expected to benefit from data scaling like large language models, but face a much tighter data bottleneck. Teleoperated real-robot trajectories remain the dominant pretraining source due to their precise action supervision and embodiment alignment, yet their scalability is limited by high collection cost, acquisition difficulty, and low behavioral and environmental diversity. These limitations have sparked interest in egocentric human video as a scalable, substantially lower-cost, and more diverse alternative for embodied model pretraining. However, its effectiveness compared to teleoperated real-robot data remains underexplored. To address this question, we conduct a systematic study comparing egocentric human video and teleoperated real-robot trajectories as pretraining data sources for embodied foundation models, under fixed post-training and validation protocols. Surprisingly, we find that egocentric data, when processed through a carefully designed filtering and labeling pipeline, is not merely a viable substitute for model pretraining but can lead to superior performance. With the same amount of pretraining data, models pretrained on egocentric data achieve a 24% lower validation loss on real-robot action prediction, as well as 52.5% and 90% higher success rates on in-distribution and out-of-distribution real-robot task execution, respectively. This finding verifies a scalable paradigm for embodied foundation models: pretrain on egocentric human video to learn diverse world representations, then adapt with a small amount of labeled real-robot data for action-space alignment. We hope this study encourages broader exploration of egocentric data and offers guidance for data quality assessment before costly robot data collection.

12.
arXiv (CS.AI) 2026-06-16

RoboPIN: Grounded Embodied Reasoning via Pinned Chain-of-Thought

arXiv:2606.15753v1 Announce Type: new Abstract: Embodied reasoning requires models to perceive task-relevant objects and spaces in physical environments and maintain consistent visual grounding throughout multi-step reasoning. However, current vision-language models rely on text-only or coordinate-augmented chain-of-thought, where entity references remain implicit and ambiguous. This may cause the reasoning process to decouple from visual evidence, entity references to drift across steps, and a causal disconnection between the reasoning trajectory and the final answer, with these problems further amplified in multi-view scenarios due to cross-view appearance changes. To address these issues, we propose Pinned Chain-of-Thought (\pincot{}), a structured reasoning paradigm that pins every reasoning step to visual evidence. \pincot{} introduces the concept of \reasoninganchor{}, which binds each task-relevant entity to a structured visual anchor with entity name, unique identity, view index, and spatial grounding, enabling consistent entity tracking across reasoning steps and views. We build a fully automated data generation pipeline to construct \dataset{}, a high-quality \pincot{}-formatted reasoning dataset. We then train \method{} through three-stage post-training that progressively injects embodied knowledge, structured reasoning ability, and process-supervised alignment, with rewards that directly constrain both anchor localization and identity consistency during reasoning. On 14 benchmarks covering embodied spatial reasoning, multi-view reasoning, and pointing, \method{} with only 4B parameters consistently outperforms 7B level open-source embodied models, achieving a 12\% average improvement over the strongest 7B baseline, Mimo-Embodied. Further analysis shows that \pincot{} improves grounding accuracy and cross-step identity consistency, validating the effectiveness of process supervision.

13.
arXiv (CS.CL) 2026-06-18

GraphPO: Graph-based Policy Optimization for Reasoning Models

Reinforcement Learning with Verifiable Rewards (RLVR) has become a standard paradigm for enhancing the capability of large reasoning models. RLVR typically samples responses independently and optimizes the policy using from final answers. This paradigm has two limitations. First, independently responses often contain similar intermediate reasoning steps, causing redundant exploration and wasted computation. Second, sparse final-answer rewards make it hard to identify useful steps. Tree-based methods partly address this problem by sharing prefixes and comparing branches from the same prefix to provide fine-grained signals. However, tree branches are still expanded independently. When different branches reach similar reasoning states, they cannot share information and repeat similar exploration. Moreover, tree-based methods ignore such dispersion and only perform local comparisons within separate branches, which can lead to higher variance in advantage estimation. To address this challenge, we propose GraphPO (Graph-based Policy Optimization), a novel RL framework that represents rollouts as a directed acyclic graph, with reasoning steps as edges and semantic states summarized from the reasoning paths as nodes. GraphPO merges semantically equivalent reasoning paths into equivalence classes, allowing them to share suffixes and reallocating budget away from redundant expansions to diverse exploration. Furthermore, we assign efficiency advantages to incoming edges and correctness advantages to outgoing edges, thereby improving inference efficiency while deriving process supervision from outcome. Theory shows that GraphPO reduces advantage-estimation variance and enhances reasoning efficiency. Experiments on three LLMs across reasoning and agentic search benchmarks show that GraphPO consistently outperforms chain- and tree-based baselines with the same token budgets or response budgets.

14.
arXiv (CS.AI) 2026-06-17

A Risk Decomposition Framework for Pre-Hoc Fine-Tuning Prediction

arXiv:2606.17649v1 Announce Type: cross Abstract: The high cost of fine-tuning LLMs poses a significant economic barrier; pre-hoc performance prediction offers a critical solution to substantially reduce this expense. However, the theoretical limits of pre-hoc performance prediction remain unexplored. We formulate it as a stochastic estimation problem under information constraints, decomposing prediction risk into two components: an intrinsic limit (static data-model compatibility) and a reducible optimization variance. We prove that optimization variance admits a necessary lower bound on its decay rate, implying fundamental constraints on how quickly uncertainty dissipates, regardless of the predictor used. Based on these dynamics, we derive a budget-optimal probing principle and introduce a predictability phase diagram that organizes tasks into three distinct regimes: Static-Sufficient, Dynamic-Critical, and Noise-Dominant. Extensive experiments on synthetic and real-world benchmarks validate these theoretical regimes and demonstrate the efficiency of our probing strategy.

15.
arXiv (CS.CV) 2026-06-16

Rotational Symmetry based Object Pose Estimation from Point Clouds in the Absence of Known 3D Models

Object pose estimation is crucial to many industrial applications, with one example being automated spray painting using a robot. However, confidentiality concerns often limit access to high-quality 3D models, posing a significant challenge for point-cloud-based pose estimation. In such scenarios, rotational symmetry, a readily accessible characteristic of many industrial objects, can provide valuable prior information to facilitate pose estimation.In this paper, we propose a method that leverages the rotational symmetry commonly found in industrial objects to address the challenge caused by the absence of 3D models. The object pose is jointly estimated with point cloud refinement through an iterative optimization process. This optimization relies on a rotational symmetry constraint loss. To construct this loss, each 3D point is rotated according to the currently estimated pose, and multiple correspondences are identified using nearest-neighbor search by exploiting the rotational symmetry property. These correspondences are then used to compute the rotational symmetry constraint loss, which iteratively refines both the pose and the point cloud.By explicitly incorporating rotational symmetry into the optimization process, the proposed method achieves robust pose estimation and generalizes well across diverse object types. The proposed method is evaluated on a dataset specifically created for point clouds without known 3D models, consisting of four categories of synthetic objects and one real wheel hub collected from a production line. Experimental results demonstrate that the proposed method achieves performance comparable to methods that rely on known 3D models.

16.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

17.
arXiv (CS.AI) 2026-06-16

CogGuard: Cognitive and Operational Profiling for Proactive Warning in Edge Intelligent Services

arXiv:2606.15199v1 Announce Type: new Abstract: Proactive warning is an important capability for edge intelligent services, where the system predicts whether a subject will successfully complete an incoming task under strict latency and privacy constraints. Such prediction depends on both long-term static attributes and short-term dynamic states derived from historical interaction logs. Recent Large Language Models (LLMs) offer strong long-context reasoning for constructing structured profiles from these logs, but existing solutions face two challenges for edge deployment: (1) profiling methods are typically domain-specific and lack a reusable abstraction across service scenarios, and (2) fine-tuning alignment models on heterogeneous edge clusters incurs high synchronization overhead due to the variance in input sequence lengths. To address these challenges, we propose CogGuard, a proactive-warning framework for edge intelligent services. CogGuard decouples offline LLM-based profile construction from online Small Language Model (SLM)-based score prediction through a shared static-dynamic profile-to-score pipeline, and instantiates it in two representative scenarios: educational performance warning and operational task outcome warning. For efficient profile construction, we design scenario-specific profiling methods with prefix-aligned KV-cache reuse to reduce repeated encoding overhead. For edge-side model alignment, we propose a length-aware distributed fine-tuning strategy with contrastive regularization to mitigate workload imbalance on heterogeneous clusters. Experiments on education and operation datasets show that CogGuard reduces profile construction time by up to 48% and distributed fine-tuning time by 19%, while achieving MAEs of 13.4 and 5.9, respectively, on 100-point-scale warning tasks. In the largest educational setting, CogGuard reduces prediction error by 15.4% compared with the strongest baseline.

18.
arXiv (CS.AI) 2026-06-11

RoboNaldo: Accurate, Stable and Powerful Humanoid Soccer Shooting via Motion-Guided Curriculum Reinforcement Learning

arXiv:2606.11092v2 Announce Type: replace-cross Abstract: Elite humanoid soccer shooting requires whole-body stability, high-impulse whole-body interactions, and accuracy to targets. Motion tracking-driven reinforcement learning (RL) provides stability in whole-body movement coordination, but a fixed reference makes it hard to adapt to varied ball positions and strike timings; in contrast, task reward-driven RL struggles to explore and discover valid kicks from scratch. We therefore introduce RoboNaldo, a three-stage motion-guided curriculum RL framework for high-impulse humanoid interaction. A single human-kick reference is used as a scaffold and progressively shifts optimization towards shooting performance. The curriculum first learns a stable whole-body kicking prior, then adapts the kick to free-kick settings where the ball is stationary at random positions, and finally extends it to moving-ball shooting through a locomotion-command and kick-trigger interface. A high-level heuristic planner controls this interface during training, while alternative high-level controllers can drive the same low-level policy at inference. In simulation, RoboNaldo demonstrates free-kick shot error 48.6% lower and shoot velocity 2.96x than prior work baselines. In real world on a Unitree G1 with onboard perception, RoboNaldo attains 0.73 m and 0.86 m average target shooting error from 3 m away in free-kick and moving-ball cases, accordingly. And the post-contact ball velocity reaches 13.10 m/s, which is 59-71% of reported professional open-play shot speed. Project page: https://opendrivelab.com/RoboNaldo.

19.
arXiv (CS.AI) 2026-06-16

LaWAM: Latent World Action Models for Efficient Dynamics-Aware Robot Policies

arXiv:2606.15768v1 Announce Type: cross Abstract: Vision-Language-Action models (VLAs) leverage large-scale vision-language pretraining for semantic robot control, but often lack explicit foresight into how robot actions change the scene. World-Action Models (WAMs) address this limitation by conditioning policies on predicted futures, yet existing approaches typically rely on computationally expensive video generation with substantial pixel-level redundancy. We present LaWAM, a Latent World Action Model that exposes predictive dynamics to robot policies through compact latent visual subgoals instead of reconstructed future video. At the core of LaWAM is a latent-action-conditioned Latent World Model (LaWM). We obtain LaWM by training a latent action model in the latent space of a pretrained vision foundation model and repurposing its forward decoder to predict future observation features for scene evolution. LaWAM then conditions action generation on these predicted latent visual subgoals to enable dynamics-aware robot control. LaWAM achieves state-of-the-art or competitive success rates (SRs) across LIBERO (98.6% SR), RoboTwin (91.22% SR), and real-world manipulation tasks while retaining low-latency inference. LaWAM runs in 187 ms per action-chunk prediction and achieves up to 24x lower wall-clock latency than pixel-space WAMs.

20.
arXiv (CS.CV) 2026-06-15

IndustryBench-MIPU: Benchmarking Multi-Image Attribute Value Extraction for Industrial Products

Industrial products such as valves and circuit breakers are defined by dense technical specifications that govern procurement, compatibility, and safety across supply chains. These specifications are scattered across multiple heterogeneous product images, including specification tables, nameplates, and technical drawings, yet whether Multimodal Large Language Models (MLLMs) can reliably recover them remains underexplored. To fill this gap, we introduce IndustryBench-MIPU, the first large-scale benchmark for multi-image industrial product understanding, built around structured attribute extraction – recovering property-value pairs from product images. This task jointly probes text recognition on specification tables and nameplates, visual reasoning over technical drawings, domain knowledge to decode industrial terminology, and cross-image evidence integration to assemble scattered specifications. Concretely, the benchmark comprises 4,559 products across 27,652 images with 103,703 annotations spanning 18 industrial categories, constructed through multi-model consensus and three-tier quality assurance. Evaluating nine MLLMs under both single-image and product-level multi-image settings reveals a stark completeness gap: models achieve high precision (86–94%) but the best recovers only 49.9% of product-level attributes; moving from single-image to multi-image extraction costs 15–34 percentage points of recall. Multi-image completeness, not single-image accuracy, is the core bottleneck. Dataset and code are publicly available.

21.
arXiv (CS.CV) 2026-06-11

UI2Code^N: UI-to-Code Generation as Interactive Visual Optimization

UI-to-code aims to translate UI screenshots into executable front-end code. Despite progress with vision-language models (VLMs), most existing methods formulate UI-to-code as a single-pass generation, which mismatches real-world UI development that is inherently iterative and feedback-driven. We reformulate UI-to-code as an interactive visual optimization problem, where code generation is embedded in a closed-loop process of execution, visual inspection, and iterative refinement driven by rendered visual feedback. To address the non-differentiability of visual objectives and the noise of absolute visual evaluators, we propose Relative Visual Policy Optimization (RVPO), a preference-based reinforcement learning method that optimizes relative visual rankings among rendered candidates under execution feedback. We instantiate this paradigm in UI2Code^N, an open-source 9B model trained via continual pre-training, supervised fine-tuning, and reinforcement learning. Experiments demonstrate state-of-the-art performance on UI drafting, UI polishing, and UI editing benchmarks, even outperforming larger models, with performance consistently improving through iterative visual optimization. Our code and models are available at https://github.com/zai-org/UI2Code_N.

22.
arXiv (CS.CV) 2026-06-16

CoIRL-AD: Collaborative-Competitive Imitation-Reinforcement Learning in Latent World Models for Autonomous Driving

End-to-end autonomous driving models trained with imitation learning (IL) often generalize poorly, particularly in long-tail scenarios where expert demonstrations are sparse. Reinforcement learning (RL) can provide complementary task-level supervision, but applying RL to real-world autonomous driving is challenging in offline settings without interactive simulators, where datasets are dominated by expert actions and provide limited behavioral diversity. We propose CoIRL-AD, a competitive dual-policy framework that integrates IL and RL under a unified offline training regime. CoIRL-AD decouples imitation and reward optimization into separate actors to alleviate objective conflicts, uses imagined future rollouts for long-horizon reward estimation, and introduces a competition mechanism that selectively transfers beneficial behaviors while keeping RL anchored to expert-like driving. Experiments on the nuScenes benchmark show that CoIRL-AD consistently improves robustness over strong IL-based baselines, with especially large gains in cross-city generalization and long-tail scenarios. Code is available at: https://github.com/SEU-zxj/CoIRL-AD.

23.
arXiv (CS.CV) 2026-06-19

Shape of Thought: Progressive Object Assembly via Visual Chain-of-Thought

Multimodal models for text-to-image generation have achieved strong visual fidelity, yet they remain brittle under compositional structural constraints, notably generative numeracy, attribute binding, and part-level relations. To address these challenges, we propose Shape-of-Thought (SoT), a visual CoT framework for process-supervised progressive shape assembly in the rendered 2D domain, without external engines at inference time. SoT trains a unified multimodal autoregressive model to generate interleaved textual plans and rendered intermediate states, helping the model capture shape-assembly logic without producing explicit geometric representations. Unlike text-only CoT, each decision is grounded in a rendered state, making counts, attachments, topology, and intermediate part-addition errors inspectable across the trajectory. To support this paradigm, we introduce SoT-26K, a large-scale dataset of grounded assembly traces derived from part-based CAD hierarchies, and T2S-CompBench, a benchmark for evaluating structural integrity and trace faithfulness. Fine-tuning on SoT-26K achieves 88.4% on component numeracy and 84.8% on structural topology, outperforming direct generation by +24.2 points on component numeracy and +19.3 points on structural topology. SoT establishes a transparent testbed for rendered-domain structure-aware generation. The code is available at https://github.com/yuhuo03/Shape-of-Thought.

24.
arXiv (CS.CV) 2026-06-19

SpatialSV: Internalizing Interpretable 3D Spatial Awareness in MLLMs via Task-Oriented Visual Supervision

Unlocking the spatial intelligence of multimodal large language model (MLLMs) is crucial for understanding and interacting with the 3D world. Prevailing approaches typically inject spatial priors via external tools, which impose significant inference overhead, or rely on latent feature distillation, which remains uninterpretable and lacks fine-grained geometric constraints. To address these issues, we propose SpatialSV, a framework designed to internalize robust 3D spatial awareness within MLLMs while simultaneously offering inherent interpretability. Deviating from passive feature imitation, SpatialSV employs task-oriented visual supervision, compelling the model to actively lift its 2D visual features into explicit 3D representations, including depth maps, camera poses, and point clouds. Crucially, this 2D-to-3D lifting process provides a transparent window into the model's representations: the resulting 3D reconstructions serve as an intuitive proxy for visualizing and diagnosing the quality of the model's intrinsic spatial knowledge. Extensive experiments across multiple models and benchmarks demonstrate the effectiveness of SpatialSV in enhancing and interpreting MLLMs' spatial intelligence. Furthermore, the framework exhibits strong generalization in semi-supervised settings, validating its potential to leverage unlabeled visual data for scalable, interpretable spatial representation learning.

25.
arXiv (CS.CL) 2026-06-11

Adaptive Multi-Resolution Procedural Knowledge Compression for Large Language Models

Large language models (LLMs) are widely used to tackle complex tasks with autonomous workflows. Recently, reusable natural language skills have emerged as a popular paradigm to inject procedural knowledge into LLM applications. Since popular skills are often invoked repeatedly, placing their full text in every context significantly increases prefill cost and latency. While text compression techniques have the potential to solve this problem, most existing methods are designed to compress factual knowledge in documents instead of procedural knowledge, making them insufficient for skill compression. In this paper, we argue that an effective skill compression method should: 1) preserve logical dependencies among workflows and tool protocols, 2) enable lightweight, offline compression for frequently updated community skills, and 3) be adaptable to varying complexities across skills. To address this, we present SKIM (SKIll coMpression), an adaptive multi-resolution soft token compression framework for procedural skills. Depending on the complexity of each skill, SKIM creates different numbers of soft tokens that not only improve the efficiency of LLM inference, but also preserve the effectiveness of skill usage. Experiments indicate that SKIM compresses skills to 30 to 60 percent of their original token length while preserving task performance better than existing compression methods.We have released our code at https://github.com/bebr2/SKIM .