×

Academic Intelligence · Curated Daily

探索全球前沿学术脉络

AcademicHub 汇聚顶级期刊与预印本平台的实时文献。定制您的专属科研雷达,利用大语言模型自动生成交叉领域文献分析简报。

作者: Bin Feng ×
换一批
01.
arXiv (CS.AI) 2026-06-12

Muse Spark Safety & Preparedness Report

arXiv:2606.12429v1 Announce Type: cross Abstract: Muse Spark is the latest large language model developed by Meta. In this report, we first present evaluations for catastrophic risk domains under Meta's Advanced AI Scaling Framework, along with the evidence that informed our launch decision. We then discuss additional considerations, such as Muse Spark's broader content safety and behavioral profile, that are relevant to overall safety but fall outside the catastrophic risk domains governed by the Framework. Our preparedness results covering Chemical and Biological, Cybersecurity, and Loss of Control risks assess Muse Spark's deployment within Meta AI as presenting acceptable levels of residual risks under our Advanced AI Scaling Framework. We conducted a broad set of evaluations targeting dual-use and high-risk capabilities across these catastrophic risk domains. Those evaluations identified elevated risks prior to mitigations, with Chemical and Biological capabilities assessed as likely reaching the "high risk" category under the Advanced AI Scaling Framework before safeguards were applied. We have implemented a multi-layered set of mitigations that address the identified risks, and Muse Spark demonstrates state-of-the-art refusal across a range of benchmarks related to hazardous workflows in chemistry and biology. We therefore release Muse Spark as the underlying model of Meta AI.

02.
arXiv (CS.CV) 2026-06-12

CACR:Reinforcing Temporal Answer Grounding in Instructional Video via Candidate-Aware Causal Reasoning

The task of temporal answer grounding in instructional video (TAGV), which aims to locate precise video segments that respond to natural language queries, is increasingly important for direct video answer retrieval. This task remains challenging due to the need to comprehend semantically complex questions and to address the significant length mismatch between untrimmed videos and short target moments. Existing methods often suffer from sensitivity to irrelevant content or insufficient visual reasoning capabilities. To tackle these limitations, we propose a Candidate-Aware Causal Reasoning (CACR) framework. Our approach first employs a Visual-Language Pre-training based Candidate Selection (VBCS) algorithm to efficiently generate K candidate segments, then applies a temporal logic reasoning module enhanced by a rejection reward mechanism and optimized via Group Relative Policy Optimization (GRPO) for robust inference. Extensive experiments on six benchmarks demonstrate that our method achieves state-of-the-art performance in terms of mean Intersection-over-Union (mIoU), providing a new perspective for reasoning-based retrieval in long videos.

03.
arXiv (CS.CL) 2026-06-16

Ling and Ring 2.6 Technical Report: Efficient and Instant Agentic Intelligence at Trillion-Parameter Scale

Efficient and scalable agentic intelligence requires models that can deliver both low-latency responses and strong reasoning capabilities while remaining practical to train, serve, and deploy. In this report, we present Ling-2.6 and Ring-2.6, a family of models designed to address this challenge at scale. Ling-2.6 is optimized for instant response generation and high capability per output token, whereas Ring-2.6 is tailored for deeper reasoning and more advanced agentic workflows. Instead of training from scratch, we upgrade the Ling-2.0 base model through architectural migration pre-training and large-scale post-training. This upgrade is guided by a unified co-design of model architecture, optimization objectives, serving systems, and agent training environments, enabling improvements in both model capability and deployment efficiency. At the architectural level, we introduce a hybrid linear attention design that integrates Lightning Attention with MLA, improving the efficiency of long-context training and decoding. To further enhance token efficiency, we optimize capability per output token through Evolutionary Chain-of-Thought, Linguistic Unit Policy Optimization, bidirectional preference alignment, and shortest-correct-response distillation. For agentic capabilities, we propose KPop, a reinforcement learning framework designed to support stable training of Ring-2.6-1T on large-scale environment-grounded data. KPop improves training efficiency through asynchronous scheduling across coding, search, tool use, and workflow execution, enabling scalable learning from complex agent-environment interactions. Together, Ling-2.6 and Ring-2.6 provide a practical pathway toward efficient, scalable, and open agentic systems. We open-source all checkpoints in the 2.6 family to support further research and development in practical agentic intelligence.

04.
arXiv (CS.CV) 2026-06-17

High-Fidelity 3D Geometric Reconstruction of Pelvic Organs from MRI: A Hybrid Deep Learning and Iterative Optimization Approach

Patient-specific 3D reconstruction of pelvic organ geometry from MRI is important for pelvic floor modeling and downstream patient-specific analysis. However, while previous studies have focused primarily on either image segmentation or downstream use of 3D models, the reconstruction of high-fidelity, high-quality geometries remains labor-intensive and poorly standardized. The study introduced a hybrid deformable shape modeling framework that integrates deep learning prediction with iterative optimization for the reconstruction of the bladder, uterus, and rectum. The framework consists of three core components: a geometry-aware multi-level deep learning architecture that preserves topological consistency of pelvic organs; a two-stage amortized optimization training strategy that balances global shape capture and local surface refinement; and a holistic synergy mechanism–where iterative optimization provides supervision for deep learning during the training phase, and during inference, deep learning rapidly predicts the global organ morphology, followed by iterative optimization to refine local surfaces and mesh quality. This framework demonstrated marked superiority in geometric fidelity than current mainstream deep learning-based organ reconstruction models. For individual anatomical structures, the reconstructed 3D geometries for the bladder, rectum, and uterus achieved significantly lower Chamfer Distance values and higher Dice Similarity Coefficient scores. In addition, while maintaining high computational efficiency, the proposed architecture yielded superior overall volumetric mesh quality. At the patient level, the framework achieved higher mean values for the 10 worst elements for both minSICN and minSIGE compared to traditional geometric post-processing algorithms.

05.
arXiv (CS.AI) 2026-06-16

Toward Vibe Medicine: A Self-Evolving Multi-Agent Framework for Clinical Decision Support

arXiv:2606.15504v1 Announce Type: new Abstract: In recent years, the advances of large language models and autonomous agents have revolutionized the healthcare field, facilitating diagnosis and improving treatment results. However, most existing AI systems rely on pre-trained knowledge and predefined pipelines, which struggle to learn dynamically from the interactive chat session history that contains patient outcomes and past failures. To address this limitation, we propose VIBEMed, a multi-agent framework with a built-in self-evolution mechanism and architecture-level safety sandbox for robust clinical decision support. The system integrates three specialized agents, including a Clinical Diagnostic Agent (CDA) for hypothesis generation, a Therapeutic Execution Agent (TEA) for treatment planning, and a Clinical Evolution Manager Agent (CEMA) that distills longitudinal clinical feedback into reusable knowledge, transforming multimodal patient information into personalized medical decisions. Through self-evolution mechanism, the framework enables iterative updates across memory, model behavior, and decision strategies, allowing the system to improve over time. Experimental results show that VIBEMed demonstrates superior performance through its evolving mechanism in complex clinical cases, particularly in tasks that require integrated decision-making and longitudinal planning. The framework also supports reliable end-to-end decisions in challenging scenarios such as oncology treatment planning, highlighting its feasibility in real-world clinical contexts. Overall, VIBEMed provides a practical path beyond static AI systems toward adaptive, experience-driven clinical decision support, demonstrating the value of combining multi-agent collaboration with continuous evolution for advancing precision medicine.

06.
arXiv (CS.AI) 2026-06-16

FastMix: Fast Data Mixture Optimization via Gradient Descent

arXiv:2606.14971v1 Announce Type: cross Abstract: While large and diverse datasets have driven recent advances in large models, identifying the optimal data mixture for pre-training and post-training remains a significant open problem. We address this challenge with FASTMIX, a novel framework that automates data mixture discovery while training only a single proxy model. Instead of relying on predefined heuristics or resource-intensive simulations, FASTMIX jointly optimizes mixture coefficients and model parameters, substantially improving efficiency and scalability over prior approaches. At the core of FASTMIX is a reformulation of mixture selection as a bilevel optimization problem. Under this reformulation, we show that optimizing mixture ratios is mathematically equivalent to assigning per-source loss weights under uniform source sampling. This embeds the mixture coefficients directly into the differentiable iterative optimization objective, enabling efficient, gradient-based optimization of both mixture and model. To solve the optimization problem, FASTMIX implements an approximate iterative optimization procedure, alternating between (i) updating model parameters on data sampled according to current mixture ratios (inner loop) and (ii) updating mixture ratios based on validation feedback (outer loop). Across pre- and post-training, FASTMIX outperforms baselines while drastically reducing search cost. Code (https://github.com/hrtan/fastmix)

07.
arXiv (CS.AI) 2026-06-18

R2D-RL: A RoboCup 2D Soccer Environment for Multi-Agent Reinforcement Learning

arXiv:2606.18786v1 Announce Type: new Abstract: Robot soccer is a challenging testbed for multi-agent reinforcement learning because it combines partial observability, cooperative and adversarial interaction, sparse rewards, and long-horizon tactical behavior. RoboCup 2D Soccer Simulation (RCSS2D) provides a mature robot-soccer platform, but its competition-oriented server-client architecture is difficult to use directly with modern Python-based MARL workflows. We introduce R2D-RL, a reinforcement learning environment that connects RCSS2D and HELIOS-based player clients to a Python MARL interface through shared-memory communication and cycle-level synchronization. R2D-RL supports full-field and scenario-based training with configurable opponents, Base discrete and Hybrid parameterized action spaces, action masks, expected possession value (EPV)-based reward shaping, and parallel execution. We provide front-goal scenarios and an 11-vs-11 full-field benchmark, together with baseline results.

08.
arXiv (CS.CV) 2026-06-12

AudioX-Turbo: A Unified Framework for Efficient Anything-to-Audio Generation

Audio and music generation based on flexible multimodal control signals is a widely applicable topic, with the following key challenges: 1) a unified multimodal modeling framework, 2) large-scale, high-quality training data, and 3) the prohibitive inference cost of multi-step diffusion sampling. As such, we propose AudioX-Turbo, a unified and efficient framework for anything-to-audio generation that integrates varied multimodal conditions (i.e., text, video, and audio signals) in this work. AudioX-Turbo follows a teacher-student paradigm. The teacher AudioX-Base is built on a Multimodal Diffusion Transformer with a Multimodal Adaptive Fusion module that aligns diverse multimodal inputs for high-fidelity synthesis, and is then distilled into the few-step student AudioX-Turbo via Distribution Matching Distillation adapted to flow matching, complemented by a diffusion-based discriminator for high-quality few-step generation. To support the training of AudioX-Turbo, we construct a large-scale, high-quality dataset, IF-caps-Pro, comprising approximately 9.2M samples curated through a two-stage data collection and annotation pipeline. We benchmark AudioX-Turbo across a wide range of tasks, finding that our model achieves superior performance, especially on text-to-audio and text-to-music generation, while operating at only 4 sampling steps and requiring approximately 25x fewer function evaluations (NFE) than multi-step baselines. These results demonstrate that our method is capable of audio generation under flexible multimodal control, showing efficient and powerful instruction-following capabilities. The code and datasets will be available at https://zeyuet.github.io/AudioX-Turbo/.

09.
arXiv (CS.CL) 2026-06-12

DSAEval: Evaluating Data Science Agents on a Wide Range of Real-World Data Science Problems

Recent LLM-based data agents aim to automate data science tasks ranging from data analysis to deep learning. However, the open-ended nature of real-world data science problems, which often span multiple taxonomies and lack standard answers, poses a significant challenge for evaluation. To address this, we introduce DSAEval, a benchmark comprising 641 real-world data science problems grounded in 285 diverse datasets, covering both structured and unstructured data (e.g., image and text). DSAEval incorporates three distinctive features: (1) Multimodal Environment Perception, which enables agents to interpret observations from multiple modalities, including text and vision; (2) Multi-Query Interactions, which mirror the iterative and cumulative nature of real-world data science projects; and (3) Multi-Dimensional Evaluation, which provides a holistic assessment across reasoning, code, and results. We systematically evaluate 13 recent advanced agentic LLMs using DSAEval. Our results show that Claude-Sonnet-4.5 achieves the strongest overall performance, MiMo-V2-Pro and GPT-5.2 lead in duration and step efficiency, respectively, and MiMo-V2-Flash is the most cost-effective. We further demonstrate that multimodal perception consistently improves performance on vision-related tasks, with gains ranging from 2.04\% to 11.30\%. Overall, while current data science agents perform well on structured data and routine data analysis workflows, substantial challenges remain in unstructured domains. Finally, we offer critical insights and outline future research directions.

10.
arXiv (CS.CV) 2026-06-15

Avatar V: Scaling Video-Reference Avatar Video Generation

Generating avatar videos that are not merely visually similar to a target individual but behaviorally recognizable, faithfully reproducing their talking rhythm, gestural tendencies, and expression dynamics, remains an open challenge. Existing methods predominantly condition on single static images, which provide insufficient identity information and cannot capture dynamic motion traits, while standard pixel-level objectives underserve the perceptually critical facial regions that determine avatar fidelity. We present Avatar V, a production-scale framework that addresses these limitations through video-reference-conditioned identity modeling. Rather than compressing identity into fixed-size embeddings, the model conditions directly on the full token sequence of a reference video, learning to reproduce both static identity attributes (facial geometry, skin texture) and dynamic behavioral patterns (talking rhythm, micro-expressions) through attention over the reference context. We introduce Sparse Reference Attention, an asymmetric mechanism achieving linear-complexity conditioning on arbitrarily long references; a motion representation stream enabling closed-loop talking style transfer; and an identity-aware super-resolution refiner inheriting the full reference conditioning. These are supported by a data engine curating 100M+ training clips from 50M raw videos, and a five-stage training pipeline with flow matching pre-training, personality fine-tuning, two-phase distillation (>10x acceleration), and RLHF alignment, deployed across thousands of GPUs. Avatar V generates 1080p videos of unlimited duration, achieving state-of-the-art identity preservation, lip synchronization, and generation quality on our cross-scene benchmark, consistently outperforming leading systems including Seedance 2.0, Kling O3 Pro, Veo 3.1, and OmniHuman 1.5 in both automated metrics and human evaluation.

11.
arXiv (CS.AI) 2026-06-19

Beyond Static Leaderboards: Predictive Validity for the Evaluation of LLM Agents

arXiv:2606.19704v1 Announce Type: new Abstract: Agent benchmarks are growing fast, but no single benchmark touches more than four or five of the dimensions that deployment exposes. This paper aggregates the largest coordinated deep-dive of one MCP-based industrial-agent benchmark to date: fourteen parallel implementation studies covering new asset classes (including a multi-modal visual extension), alternative orchestrations, retrieval strategies, reasoning modes, infrastructure optimizations, and evaluation-methodology probes. Consolidating those studies with seven prior agent benchmarks, we argue that aggregate-score leaderboards systematically underspecify deployed-agent evaluation. Rankings derived from aggregate scores do not transfer to out-of-distribution settings; recent public-to-hidden competition retrospectives provide direct empirical evidence of this rank instability. We propose ranking configurations by predictive validity, the correlation between in-sample and out-of-sample rank, rather than in-sample mean, and report a twelve-tier measurement apparatus that exposes the deployment-relevant dimensions HELM and its agent-era successors collapse. The position is operationalized through three falsifiable out-of-distribution criteria with explicit thresholds; existing evidence partly supports it but is too thin to confirm. We close with a pre-registered pilot design and a field-level vision for what the next generation of agentic benchmarks should report.

12.
arXiv (CS.CL) 2026-06-19

DeXposure-Claw: An Agentic System for DeFi Risk Supervision

Decentralized finance exposes supervisors to fast-moving, networked credit risks. General-purpose LLM agents fit this setting poorly: they over-read weak evidence and recommend high-stakes interventions, while existing evaluations offer no regulator-aligned way to measure the resulting false alarms. We introduce DeXposure-Claw, a forecast-grounded agentic supervision system that routes LLM decisions through structured evidence: (1) DeXposure-FM, a graph time-series foundation model, forecasts future exposure networks; (2) deterministic monitors and stress scenarios then turn those forecasts into typed alerts, attribution signals, and scenario evidence; and (3) data-health and confidence gates constrain escalation before DeXposure-Claw emits auditable supervisory tickets with rationales. We further develop DeXposure-Bench, a six-axis evaluation harness, whose decision axis scores tickets against a regulator-aligned absolute-loss ground truth and an explicit false-intervention rate. Experiments on five years of weekly real data fully support our system. Code is at https://github.com/EVIEHub/DeXposure-Claw.

13.
arXiv (CS.LG) 2026-06-18

Unlocking air traffic flow prediction through microscopic aircraft-state modeling

arXiv:2605.10083v2 Announce Type: replace Abstract: Short-term air traffic flow prediction in terminal airspace is essential for proactive air traffic management. Existing approaches predominantly model traffic flow as aggregated time series. However, traffic dynamics are governed by aircraft states and their interactions in continuous airspace. Such aggregation obscures fine-grained information, including aircraft kinematics, boundary interactions, and control intent. Here we present AeroSense, a state-to-flow modeling paradigm that predicts future traffic flow directly from instantaneous airspace situations represented as dynamic sets of aircraft states derived from ADS-B trajectories. By establishing an end-to-end mapping from microscopic aircraft states to future regional traffic flow, AeroSense preserves aircraft-level dynamics while naturally accommodating varying traffic density without relying on historical look-back windows. Experiments on a large-scale real-world dataset show that AeroSense exhibits admirable predictive accuracy and robustness over aggregation-based forecasting approaches, particularly during high-density traffic periods. These findings suggest that aircraft-state situation modeling provides a promising alternative to conventional time-series forecasting in air traffic flow management.

14.
arXiv (CS.CV) 2026-06-17

NTIRE 2025 Challenge on Image Super-Resolution (x4): Methods and Results

This paper presents the NTIRE 2025 image super-resolution ($\times$4) challenge, one of the associated competitions of the 10th NTIRE Workshop at CVPR 2025. The challenge aims to recover high-resolution (HR) images from low-resolution (LR) counterparts generated through bicubic downsampling with a $\times$4 scaling factor. The objective is to develop effective network designs or solutions that achieve state-of-the-art SR performance. To reflect the dual objectives of image SR research, the challenge includes two sub-tracks: (1) a restoration track, emphasizes pixel-wise accuracy and ranks submissions based on PSNR; (2) a perceptual track, focuses on visual realism and ranks results by a perceptual score. A total of 286 participants registered for the competition, with 25 teams submitting valid entries. This report summarizes the challenge design, datasets, evaluation protocol, the main results, and methods of each team. The challenge serves as a benchmark to advance the state of the art and foster progress in image SR.

15.
arXiv (CS.CV) 2026-06-17

NTIRE 2024 Challenge on Image Super-Resolution (x4): Methods and Results

This paper reviews the NTIRE 2024 challenge on image super-resolution ($\times$4), highlighting the solutions proposed and the outcomes obtained. The challenge involves generating corresponding high-resolution (HR) images, magnified by a factor of four, from low-resolution (LR) inputs using prior information. The LR images originate from bicubic downsampling degradation. The aim of the challenge is to obtain designs/solutions with the most advanced SR performance, with no constraints on computational resources (e.g., model size and FLOPs) or training data. The track of this challenge assesses performance with the PSNR metric on the DIV2K testing dataset. The competition attracted 199 registrants, with 20 teams submitting valid entries. This collective endeavour not only pushes the boundaries of performance in single-image SR but also offers a comprehensive overview of current trends in this field.

16.
arXiv (CS.CL) 2026-06-19

DeepSeek-V4: Towards Highly Efficient Million-Token Context Intelligence

We present a preview version of DeepSeek-V4 series, including two strong Mixture-of-Experts (MoE) language models – DeepSeek-V4-Pro with 1.6T parameters (49B activated) and DeepSeek-V4-Flash with 284B parameters (13B activated) – both supporting a context length of one million tokens. DeepSeek-V4 series incorporate several key upgrades in architecture and optimization: (1) a hybrid attention architecture that combines Compressed Sparse Attention (CSA) and Heavily Compressed Attention (HCA) to improve long-context efficiency; (2) Manifold-Constrained Hyper-Connections (mHC) that enhance conventional residual connections; (3) and the Muon optimizer for faster convergence and greater training stability. We pre-train both models on more than 32T diverse and high-quality tokens, followed by a comprehensive post-training pipeline that unlocks and further enhances their capabilities. DeepSeek-V4-Pro-Max, the maximum reasoning effort mode of DeepSeek-V4-Pro, redefines the state-of-the-art for open models, outperforming its predecessors in core tasks. Meanwhile, DeepSeek-V4 series are highly efficient in long-context scenarios. In the one-million-token context setting, DeepSeek-V4-Pro requires only 27% of single-token inference FLOPs and 10% of KV cache compared with DeepSeek-V3.2. This enables us to routinely support one-million-token contexts, thereby making long-horizon tasks and further test-time scaling more feasible. The model checkpoints are available at https://huggingface.co/collections/deepseek-ai/deepseek-v4.

17.
arXiv (CS.CL) 2026-06-16

Nemotron 3 Ultra: Open, Efficient Mixture-of-Experts Hybrid Mamba-Transformer Model for Agentic Reasoning

We introduce Nemotron 3 Ultra, a 550 billion total and 55 billion active parameter Mixture-of-Experts Hybrid Mamba-Attention language model. We pre-trained Nemotron 3 Ultra on 20 trillion text tokens, then extended the context length to 1M tokens, and post-trained using Supervised Fine Tuning (SFT), Reinforcement Learning (RL), and Multi-teacher On-Policy Distillation (MOPD). Nemotron 3 Ultra is our most capable model yet, employing multiple key technologies - LatentMoE, Multi Token Prediction (MTP), NVFP4 pre-training, multi-environment RLVR, MOPD, and reasoning budget control. Nemotron 3 Ultra achieves up to ~6x higher inference throughput as compared to state-of-the-art publicly available LLMs while attaining on-par accuracy. The state-of-the-art accuracy, high inference throughput, and 1M token context length make Nemotron 3 Ultra ideal for long-running autonomous agentic tasks. We open-source the base, post-trained, and quantized checkpoints, along with the training data and recipe on HuggingFace.

18.
arXiv (CS.AI) 2026-06-12

MiniMax Sparse Attention

arXiv:2606.13392v1 Announce Type: new Abstract: Ultra-long-context capability is becoming indispensable for frontier LLMs: agentic workflows, repository-scale code reasoning, and persistent memory all require the model to jointly attend over hundreds of thousands to millions of tokens, yet the quadratic cost of softmax attention makes this untenable at deployment scale. We introduce MiniMax Sparse Attention (MSA), a blockwise sparse attention built upon Grouped Query Attention (GQA). A lightweight Index Branch scores key-value blocks and independently selects a Top-k subset for each GQA group, enabling group-specific sparse retrieval while maintaining efficient block-level execution; the Main Branch then performs exact block-sparse attention over only the selected blocks. Designed around a principle of simplicity and scalability, MSA is deliberately streamlined, making it straightforward to deploy efficiently across a broad range of GPUs. To translate sparsity into practical speedups, we co-design MSA with a GPU execution path that uses exp-free Top-k selection and KV-outer sparse attention to improve tensor-core utilization under block-granular access. On a 109B-parameter model with native multimodal training, MSA performs on par with GQA while reducing per-token attention compute by 28.4x at 1M context. Paired with our co-designed kernel, MSA achieves 14.2x prefill and 7.6x decoding wall-clock speedups on H800. Our inference kernel is available at: https://github.com/MiniMax-AI/MSA. A production-grade natively multimodal model powered by MSA has been publicly released at: https://huggingface.co/MiniMaxAI/MiniMax-M3.

19.
arXiv (CS.CV) 2026-06-16

DreamX-World 1.0: A General-Purpose Interactive World Model

DreamX-World 1.0 is a general-purpose interactive text/image-to-video world model for controllable long-horizon generation. It supports camera navigation, revisits to previously observed regions, and promptable events across photorealistic, game-style, and stylized domains. Our data engine combines camera-accurate Unreal Engine rendering, action-rich gameplay recordings, and real-world videos with recovered camera geometry. For camera control, we introduce E-PRoPE, a lightweight variant of projective positional encoding that retains PRoPE's projective camera geometry while applying camera-aware attention to spatially reduced tokens. We convert a bidirectional video generator into a few-step autoregressive world model using causal forcing, DMD-style distillation, and long-rollout training. Training on self-generated long-horizon contexts exposes the model to its own generated history and reduces the style and color drift that accumulates across autoregressive chunks. Memory-Conditioned Scene Persistence retrieves earlier views through camera-geometry-based retrieval, while residual recycling makes the conditioning path less sensitive to imperfect memory latents. Event Instruction Tuning adds composable event control, and reinforcement learning alignment recovers camera control and visual quality after distillation. With mixed-precision DiT execution, residual reuse, 75\%-pruned VAE decoding, and asynchronous pipeline parallelism, DreamX-World 1.0 reaches up to 16\,FPS on eight RTX\,5090 GPUs. On our 5-second basic evaluation, DreamX-World 1.0 achieves a camera-control score of 73.75 and an overall score of 84.76, outperforming HY-WorldPlay 1.5 and LingBot-World in overall score, which achieve 80.79 and 80.45, respectively.

20.
arXiv (CS.CL) 2026-06-16

CHILLGuard: Towards Fine-Grained Chinese LLM Safety Guardrail with Scalable Data Construction and Model-aware Preference Alignment

Malicious content generated from large language models (LLMs) could pose severe safety risks and ethical concerns. While existing LLM safety guardrails excel in English or multilingual settings, they lack adaptation to Chinese-specific regulatory policies, cultural context and linguistic nuances, failing to support fine-grained risk classification for diverse deployment needs. In this paper, we introduce a 5-macro, 31-micro category fine-grained risk taxonomy for Chinese scenarios, and build CHILLGuard: a dedicated Chinese LLM content safety guardrail. To address the critical scarcity of high-quality annotated Chinese safety data, we propose a scalable multi-stage data construction pipeline: we expand multi-source corpus via retrieval-augmented generation, generate implicit harmful samples through prompt engineering rewriting, and refine high-quality data via multi-model voting-based label calibration. Based on this, we build CHILLGuardTrain, a large-scale training set with 405,007 samples, and CHILLGuardTest, a rigorously curated annotated test set with 51,745 samples. We then train CHILLGuard on CHILLGuardTrain under a generator-classifier collaborative framework via Model-aware Direct Preference Optimization. Extensive experiments under multiple settings demonstrate the state-of-the-art performance of CHILLGuard, e.g., a 15.92% improvement of F1 score over Qwen3Guard-8B-Strict on our benchmark. We will release our resources at https://github.com/cswbyu/CHILLGuard.

21.
arXiv (CS.CV) 2026-06-18

Cosmos 3: Omnimodal World Models for Physical AI

We introduce Cosmos 3, a family of omnimodal world models designed to jointly process and generate language, image, video, audio, and action sequences within a unified mixture-of-transformers architecture. By supporting highly flexible input-output configurations, Cosmos 3 seamlessly unifies critical modalities for Physical AI – effectively subsuming vision-language models, video generators, world simulators, and world-action models into a single framework. Our evaluation demonstrates that Cosmos 3 establishes a new state-of-the-art across a diverse suite of understanding and generation tasks, demonstrating omnimodal world models as scalable, general-purpose backbones for embodied agents. Our post-trained Cosmos 3 models were ranked as the best open-source Text-to-Image and Image-to-Video models by Artificial Analysis, and the best policy model by RoboArena at the time the technical report was written. To accelerate open research and deployment in Physical AI, we make our code, model checkpoints, curated synthetic datasets, and evaluation benchmark available under the Linux Foundation's OpenMDW-1.1 License at https://github.com/nvidia/cosmos and https://huggingface.co/collections/nvidia/cosmos3. The project website is available at https://research.nvidia.com/labs/cosmos-lab/cosmos3.

22.
arXiv (CS.CV) 2026-06-18

Hilbert-Geo: Solving Solid Geometric Problems by Neural-Symbolic Reasoning

Geometric problem solving, as a typical multimodal reasoning problem, has attracted much attention and made great progress recently, however most of works focus on plane geometry while usually fail in solid geometry due to 3D spatial diagrams and complex reasoning. To bridge this gap, we introduce Hilbert-Geo, the first unified formal language framework for solid geometry, including an extensive predicate library and a dedicated theorem bank. Based on this framework, we propose a Parse2Reason method containing two steps of first parsing then reasoning. In the parsing step, we utilize conditional description language (CDL), a formalized language composed of predicates specifically designed to construct geometric conditions, to represent both problem description (natural text) and solid diagrams (visual image). In the reasoning step, we leverage those formal CDL and the theorem bank to perform relational inference and algebraic computation, generating strictly correct, verifiable, and human-readable reasoning processes. Notably, our proposed Hilbert-Geo is also applicable to plane geometry. To advance geometric reasoning, we curate two expert-annotated dataset SolidFGeo2k and PlaneFGeo3k, which are furnished with geometric formal language annotations, solutions and answers. Extensive experiments show that our proposed method achieves the state-of-the-art (SOTA) performance 77.3% in SolidFGeo2k and 84.1% in MathVerse-Solid (one small subset in MathVerse dedicated to solid geometry), substantially outperforming leading MLLMs, such as Gemini-2.5-pro (54.2% on SolidFGeo2k) and GPT-5 (62.9% on MathVerse-Solid). In addition, our method achieves the SOTA accuracy 80.2% in PlaneFGeo3k, demonstrating the generality of the Hilbert-Geo in geometric reasoning. Our code and datasets are released at https://github.com/PremiLab-Math/Hilbert-Geo.

23.
arXiv (CS.LG) 2026-06-16

AREAL-DTA: Dynamic Tree Attention for Efficient Reinforcement Learning of Large Language Models

arXiv:2602.00482v2 Announce Type: replace Abstract: Reinforcement learning (RL)-based post-training for large language models (LLMs) is computationally expensive, as it generates many rollout sequences that frequently share long token prefixes. Existing RL frameworks usually process these sequences independently during policy training, i.e., repeatedly recomputing identical prefixes in both the forward and backward passes of policy gradient computation, leading to substantial inefficiencies in computation resources and memory usage. Although prefix sharing naturally induces a tree structure over rollouts, packed tree-mask approaches scale poorly in RL settings. In this paper, we introduce AReaL-DTA, which efficiently exploits prefix sharing in RL training. AReaL-DTA employs a depth-first search (DFS)-based execution strategy that dynamically traverses the rollout prefix tree during both forward and backward computation, materializing only a single root-to-leaf path at a time. To further improve scalability, AReaL-DTA incorporates a load-balanced distributed batching mechanism that dynamically constructs and processes prefix trees across multiple GPUs. On $\tau^2$-bench, AReaL-DTA improves training throughput by up to $8.31\times$ over dense training and up to $1.70\times$ over sparse training. Our code is available at https://github.com/areal-project/AReaL/tree/feat/dta.

24.
arXiv (CS.AI) 2026-06-16

SkillsBench: Benchmarking How Well Agent Skills Work Across Diverse Tasks

arXiv:2602.12670v4 Announce Type: replace Abstract: Agent Skills are structured packages of procedural knowledge that augment large language model (LLM) agents at inference time. Despite rapid adoption, there is no standard way to measure whether they actually help. We present SkillsBench, a benchmark whose current inventory contains 87 tasks across 8 domains paired with curated Skills and deterministic verifiers. Our latest aggregate evaluation runs the 87-task benchmark under matched no-Skills and curated-Skills conditions for 18 model-harness configurations. Curated Skills raise the average pass rate from 33.9% to 50.5% (+16.6 percentage points; 25.5% normalized gain), with configuration-level gains ranging from +4.1 to +25.7 pp. Focused Skills with at most three modules outperform larger or exhaustive bundles, and smaller models with Skills can match larger models without them. SkillsBench establishes paired evaluation as the foundation for rigorous measurement of Skill efficacy on agentic, expertise-heavy work.

25.
arXiv (CS.CL) 2026-06-11

ResearchClawBench: A Benchmark for End-to-End Autonomous Scientific Research

AI coding agents are increasingly used for scientific work, but their end-to-end autonomous research capability remains difficult to verify. We present ResearchClawBench, a benchmark for evaluating autonomous scientific research across 40 tasks from 10 scientific domains. Each task is grounded in a real published paper, provides related literature and raw data, and hides the target paper during evaluation. Expert-curated multimodal rubrics decompose the target scientific artifacts into weighted criteria, enabling evaluation of target-paper-level re-discovery while leaving room for new discovery. We evaluate seven autonomous research (auto-research) agents under a unified protocol and seventeen native LLMs through the lightweight ResearchHarness. Current systems remain far from reliable re-discovery: the strongest autonomous agent, Claude Code, averages 21.5, and the strongest ResearchHarness LLM, Claude-Opus-4.7, averages 20.7, with an LLM frontier mean of only 26.5. Error analysis shows that failures concentrate in experimental protocol mismatch, evidence mismatch, and missing scientific core. ResearchClawBench provides a reproducible evaluation frontier for measuring progress toward autonomous scientific research.